当前位置: 首页>>代码示例>>Golang>>正文


Golang ClientV2.String方法代码示例

本文整理汇总了Golang中github.com/absolute8511/nsq/nsqd.ClientV2.String方法的典型用法代码示例。如果您正苦于以下问题:Golang ClientV2.String方法的具体用法?Golang ClientV2.String怎么用?Golang ClientV2.String使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在github.com/absolute8511/nsq/nsqd.ClientV2的用法示例。


在下文中一共展示了ClientV2.String方法的4个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。

示例1: FIN

func (p *protocolV2) FIN(client *nsqd.ClientV2, params [][]byte) ([]byte, error) {
	state := atomic.LoadInt32(&client.State)
	if state != stateSubscribed && state != stateClosing {
		nsqd.NsqLogger().LogWarningf("[%s] command in wrong state: %v", client, state)
		return nil, protocol.NewFatalClientErr(nil, E_INVALID, "cannot FIN in current state")
	}

	if len(params) < 2 {
		nsqd.NsqLogger().LogDebugf("FIN error params: %v", params)
		return nil, protocol.NewFatalClientErr(nil, E_INVALID, "FIN insufficient number of params")
	}

	id, err := getFullMessageID(params[1])
	if err != nil {
		nsqd.NsqLogger().LogDebugf("FIN error: %v, %v", params[1], err)
		return nil, protocol.NewFatalClientErr(nil, E_INVALID, err.Error())
	}
	msgID := nsqd.GetMessageIDFromFullMsgID(*id)
	if int64(msgID) <= 0 {
		return nil, protocol.NewFatalClientErr(nil, E_INVALID, "Invalid Message ID")
	}

	if client.Channel == nil {
		nsqd.NsqLogger().LogDebugf("FIN error no channel: %v", msgID)
		return nil, protocol.NewFatalClientErr(nil, E_INVALID, "No channel")
	}

	if !p.ctx.checkForMasterWrite(client.Channel.GetTopicName(), client.Channel.GetTopicPart()) {
		nsqd.NsqLogger().Logf("topic %v fin message failed for not leader", client.Channel.GetTopicName())
		return nil, protocol.NewFatalClientErr(nil, FailedOnNotLeader, "")
	}

	err = p.ctx.FinishMessage(client.Channel, client.ID, client.String(), msgID)
	if err != nil {
		client.IncrSubError(int64(1))
		nsqd.NsqLogger().LogDebugf("FIN error : %v, err: %v, channel: %v, topic: %v", msgID,
			err, client.Channel.GetName(), client.Channel.GetTopicName())
		if clusterErr, ok := err.(*consistence.CommonCoordErr); ok {
			if !clusterErr.IsLocalErr() {
				return nil, protocol.NewFatalClientErr(err, FailedOnNotWritable, "")
			}
		}
		return nil, protocol.NewClientErr(err, "E_FIN_FAILED",
			fmt.Sprintf("FIN %v failed %s", *id, err.Error()))
	}
	client.FinishedMessage()

	return nil, nil
}
开发者ID:absolute8511,项目名称:nsq,代码行数:49,代码来源:protocol_v2.go

示例2: REQ

func (p *protocolV2) REQ(client *nsqd.ClientV2, params [][]byte) ([]byte, error) {
	state := atomic.LoadInt32(&client.State)
	if state != stateSubscribed && state != stateClosing {
		nsqd.NsqLogger().LogWarningf("[%s] command in wrong state: %v", client, state)
		return nil, protocol.NewFatalClientErr(nil, E_INVALID, "cannot REQ in current state")
	}

	if len(params) < 3 {
		return nil, protocol.NewFatalClientErr(nil, E_INVALID, "REQ insufficient number of params")
	}

	id, err := getFullMessageID(params[1])
	if err != nil {
		return nil, protocol.NewFatalClientErr(nil, E_INVALID, err.Error())
	}

	timeoutMs, err := protocol.ByteToBase10(params[2])
	if err != nil {
		return nil, protocol.NewFatalClientErr(err, E_INVALID,
			fmt.Sprintf("REQ could not parse timeout %s", params[2]))
	}
	timeoutDuration := time.Duration(timeoutMs) * time.Millisecond

	if timeoutDuration < 0 || timeoutDuration > p.ctx.getOpts().MaxReqTimeout {
		return nil, protocol.NewFatalClientErr(nil, E_INVALID,
			fmt.Sprintf("REQ timeout %v out of range 0-%v", timeoutDuration, p.ctx.getOpts().MaxReqTimeout))
	}

	if client.Channel == nil {
		return nil, protocol.NewFatalClientErr(nil, E_INVALID, "No channel")
	}
	err = client.Channel.RequeueMessage(client.ID, client.String(), nsqd.GetMessageIDFromFullMsgID(*id), timeoutDuration, true)
	if err != nil {
		client.IncrSubError(int64(1))
		return nil, protocol.NewClientErr(err, "E_REQ_FAILED",
			fmt.Sprintf("REQ %v failed %s", *id, err.Error()))
	}

	client.RequeuedMessage(timeoutDuration > 0)

	return nil, nil
}
开发者ID:absolute8511,项目名称:nsq,代码行数:42,代码来源:protocol_v2.go

示例3: internalSUB

func (p *protocolV2) internalSUB(client *nsqd.ClientV2, params [][]byte, enableTrace bool,
	ordered bool, startFrom *ConsumeOffset) ([]byte, error) {

	state := atomic.LoadInt32(&client.State)
	if state != stateInit {
		nsqd.NsqLogger().LogWarningf("[%s] command in wrong state: %v", client, state)
		return nil, protocol.NewFatalClientErr(nil, E_INVALID, "cannot SUB in current state")
	}

	if client.HeartbeatInterval <= 0 {
		return nil, protocol.NewFatalClientErr(nil, E_INVALID, "cannot SUB with heartbeats disabled")
	}

	if len(params) < 3 {
		return nil, protocol.NewFatalClientErr(nil, E_INVALID, "SUB insufficient number of parameters")
	}

	topicName := string(params[1])
	if !protocol.IsValidTopicName(topicName) {
		return nil, protocol.NewFatalClientErr(nil, "E_BAD_TOPIC",
			fmt.Sprintf("SUB topic name %q is not valid", topicName))
	}

	partition := -1
	channelName := ""
	var err error
	channelName = string(params[2])
	if !protocol.IsValidChannelName(channelName) {
		return nil, protocol.NewFatalClientErr(nil, "E_BAD_CHANNEL",
			fmt.Sprintf("SUB channel name %q is not valid", channelName))
	}

	if len(params) == 4 {
		partition, err = strconv.Atoi(string(params[3]))
		if err != nil {
			return nil, protocol.NewFatalClientErr(nil, "E_BAD_PARTITION",
				fmt.Sprintf("topic partition is not valid: %v", err))
		}
	}

	if err = p.CheckAuth(client, "SUB", topicName, channelName); err != nil {
		return nil, err
	}

	if partition == -1 {
		partition = p.ctx.getDefaultPartition(topicName)
	}

	topic, err := p.ctx.getExistingTopic(topicName, partition)
	if err != nil {
		nsqd.NsqLogger().Logf("sub to not existing topic: %v, err:%v", topicName, err.Error())
		return nil, protocol.NewFatalClientErr(nil, E_TOPIC_NOT_EXIST, "")
	}
	if !p.ctx.checkForMasterWrite(topicName, partition) {
		nsqd.NsqLogger().Logf("sub failed on not leader: %v-%v, remote is : %v", topicName, partition, client.RemoteAddr())
		// we need disable topic here to trigger a notify, maybe we failed to notify lookup last time.
		topic.DisableForSlave()
		return nil, protocol.NewFatalClientErr(nil, FailedOnNotLeader, "")
	}
	channel := topic.GetChannel(channelName)
	err = channel.AddClient(client.ID, client)
	if err != nil {
		nsqd.NsqLogger().Logf("sub failed to add client: %v, %v", client, err)
		return nil, protocol.NewFatalClientErr(nil, FailedOnNotWritable, "")
	}

	atomic.StoreInt32(&client.State, stateSubscribed)
	client.Channel = channel
	if enableTrace {
		nsqd.NsqLogger().Logf("sub channel %v with trace enabled, remote is : %v", channelName, client.RemoteAddr())
	}
	if ordered {
		if atomic.LoadInt32(&client.SampleRate) != 0 {
			nsqd.NsqLogger().Errorf("%v", ErrOrderChannelOnSampleRate)
			return nil, protocol.NewFatalClientErr(nil, E_INVALID, ErrOrderChannelOnSampleRate.Error())
		}
		channel.SetOrdered(true)
	}
	if startFrom != nil {
		cnt := channel.GetClientsCount()
		if cnt > 1 {
			nsqd.NsqLogger().LogDebugf("the consume offset: %v can only be set by the first client: %v", startFrom, cnt)
		} else {
			queueOffset, cnt, err := p.ctx.SetChannelOffset(channel, startFrom, false)
			if err != nil {
				return nil, protocol.NewFatalClientErr(nil, E_INVALID, err.Error())
			}
			nsqd.NsqLogger().Logf("set the channel offset: %v (actual set : %v:%v), by client:%v, %v",
				startFrom, queueOffset, cnt, client.String(), client.UserAgent)
		}
	}
	client.EnableTrace = enableTrace
	// update message pump
	client.SubEventChan <- channel

	return okBytes, nil
}
开发者ID:absolute8511,项目名称:nsq,代码行数:97,代码来源:protocol_v2.go

示例4: messagePump


//.........这里部分代码省略.........
			flusherChan = outputBufferTicker.C
		}

		select {
		case <-client.ExitChan:
			goto exit
		case <-flusherChan:
			// if this case wins, we're either starved
			// or we won the race between other channels...
			// in either case, force flush
			client.LockWrite()
			err = client.Flush()
			client.UnlockWrite()
			if err != nil {
				goto exit
			}
			flushed = true
		case <-client.ReadyStateChan:
		case subChannel = <-subEventChan:
			// you can't SUB anymore
			nsqd.NsqLogger().Logf("client %v sub to channel: %v", client.ID,
				subChannel.GetName())
			subEventChan = nil
		case identifyData := <-identifyEventChan:
			// you can't IDENTIFY anymore
			identifyEventChan = nil

			outputBufferTicker.Stop()
			if identifyData.OutputBufferTimeout > 0 {
				outputBufferTicker = time.NewTicker(identifyData.OutputBufferTimeout)
			}

			heartbeatTicker.Stop()
			heartbeatChan = nil
			if identifyData.HeartbeatInterval > 0 {
				heartbeatTicker = time.NewTicker(identifyData.HeartbeatInterval)
				heartbeatChan = heartbeatTicker.C
			}

			if identifyData.SampleRate > 0 {
				sampleRate = identifyData.SampleRate
			}

			msgTimeout = identifyData.MsgTimeout
		case <-heartbeatChan:
			if subChannel != nil && client.IsReadyForMessages() {
				// try wake up the channel
				subChannel.TryWakeupRead()
			}

			err = Send(client, frameTypeResponse, heartbeatBytes)
			nsqd.NsqLogger().LogDebugf("PROTOCOL(V2): [%s] send heartbeat", client)
			if err != nil {
				heartbeatFailedCnt++
				nsqd.NsqLogger().LogWarningf("PROTOCOL(V2): [%s] send heartbeat failed %v times, %v", client, heartbeatFailedCnt, err)
				if heartbeatFailedCnt > 2 {
					goto exit
				}
			} else {
				heartbeatFailedCnt = 0
			}
		case msg, ok := <-clientMsgChan:
			if !ok {
				goto exit
			}

			if sampleRate > 0 && rand.Int31n(100) > sampleRate {
				// FIN automatically, all message will not wait to confirm if not sending,
				// and the reader keep moving forward.
				offset, _, _, _ := subChannel.ConfirmBackendQueue(msg)
				// TODO: sync to replica nodes.
				_ = offset
				continue
			}
			// avoid re-send some confirmed message,
			// this may happen while the channel reader is reset to old position
			// due to some retry or leader change.
			if subChannel.IsConfirmed(msg) {
				continue
			}

			subChannel.StartInFlightTimeout(msg, client.ID, client.String(), msgTimeout)
			client.SendingMessage()
			err = SendMessage(client, msg, &buf, subChannel.IsOrdered())
			if err != nil {
				goto exit
			}
			flushed = false
		}
	}

exit:
	nsqd.NsqLogger().LogDebugf("PROTOCOL(V2): [%s] exiting messagePump", client)
	heartbeatTicker.Stop()
	outputBufferTicker.Stop()
	if err != nil {
		nsqd.NsqLogger().Logf("PROTOCOL(V2): [%s] messagePump error - %s", client, err)
	}
	close(stoppedChan)
}
开发者ID:absolute8511,项目名称:nsq,代码行数:101,代码来源:protocol_v2.go


注:本文中的github.com/absolute8511/nsq/nsqd.ClientV2.String方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。