本文整理汇总了Golang中context.Context类的典型用法代码示例。如果您正苦于以下问题:Golang Context类的具体用法?Golang Context怎么用?Golang Context使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了Context类的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。
示例1: fetchNodes
func fetchNodes(ctx context.Context, ds DAGService, in <-chan []*cid.Cid, out chan<- *NodeOption) {
var wg sync.WaitGroup
defer func() {
// wait for all 'get' calls to complete so we don't accidentally send
// on a closed channel
wg.Wait()
close(out)
}()
get := func(ks []*cid.Cid) {
defer wg.Done()
nodes := ds.GetMany(ctx, ks)
for opt := range nodes {
select {
case out <- opt:
case <-ctx.Done():
return
}
}
}
for ks := range in {
wg.Add(1)
go get(ks)
}
}
示例2: FromContext
func FromContext(ctx context.Context) *App {
app, ok := ctx.Value(ctxKey).(*App)
if !ok {
panic(kerr.New("EJRTLPWCKH", "No app in ctx").Error())
}
return app
}
示例3: FindProvidersAsync
// FindProvidersAsync returns a channel of providers for the given key
func (bsnet *impl) FindProvidersAsync(ctx context.Context, k *cid.Cid, max int) <-chan peer.ID {
// Since routing queries are expensive, give bitswap the peers to which we
// have open connections. Note that this may cause issues if bitswap starts
// precisely tracking which peers provide certain keys. This optimization
// would be misleading. In the long run, this may not be the most
// appropriate place for this optimization, but it won't cause any harm in
// the short term.
connectedPeers := bsnet.host.Network().Peers()
out := make(chan peer.ID, len(connectedPeers)) // just enough buffer for these connectedPeers
for _, id := range connectedPeers {
if id == bsnet.host.ID() {
continue // ignore self as provider
}
out <- id
}
go func() {
defer close(out)
providers := bsnet.routing.FindProvidersAsync(ctx, k, max)
for info := range providers {
if info.ID == bsnet.host.ID() {
continue // ignore self as provider
}
bsnet.host.Peerstore().AddAddrs(info.ID, info.Addrs, pstore.TempAddrTTL)
select {
case <-ctx.Done():
return
case out <- info.ID:
}
}
}()
return out
}
示例4: do
func (c *Client) do(ctx context.Context, req *http.Request) (*http.Response, error) {
if nil == ctx || nil == ctx.Done() { // ctx.Done() is for ctx
return c.Client.Do(req)
}
return c.Client.Do(req.WithContext(ctx))
}
示例5: RequestContextFromContext
func RequestContextFromContext(ctx context.Context) *RequestContext {
val := ctx.Value(requestContextCtxKey)
if val == nil {
return nil
}
return val.(*RequestContext)
}
示例6: provideCollector
func (bs *Bitswap) provideCollector(ctx context.Context) {
defer close(bs.provideKeys)
var toProvide []*cid.Cid
var nextKey *cid.Cid
var keysOut chan *cid.Cid
for {
select {
case blkey, ok := <-bs.newBlocks:
if !ok {
log.Debug("newBlocks channel closed")
return
}
if keysOut == nil {
nextKey = blkey
keysOut = bs.provideKeys
} else {
toProvide = append(toProvide, blkey)
}
case keysOut <- nextKey:
if len(toProvide) > 0 {
nextKey = toProvide[0]
toProvide = toProvide[1:]
} else {
keysOut = nil
}
case <-ctx.Done():
return
}
}
}
示例7: exchange
// exchange sends a query on the connection and hopes for a response.
func exchange(ctx context.Context, server, name string, qtype uint16) (*dnsMsg, error) {
d := testHookDNSDialer()
out := dnsMsg{
dnsMsgHdr: dnsMsgHdr{
recursion_desired: true,
},
question: []dnsQuestion{
{name, qtype, dnsClassINET},
},
}
for _, network := range []string{"udp", "tcp"} {
c, err := d.dialDNS(ctx, network, server)
if err != nil {
return nil, err
}
defer c.Close()
if d, ok := ctx.Deadline(); ok && !d.IsZero() {
c.SetDeadline(d)
}
out.id = uint16(rand.Int()) ^ uint16(time.Now().UnixNano())
in, err := c.dnsRoundTrip(&out)
if err != nil {
return nil, mapErr(err)
}
if in.truncated { // see RFC 5966
continue
}
return in, nil
}
return nil, errors.New("no answer from DNS server")
}
示例8: bloomCached
// bloomCached returns Blockstore that caches Has requests using Bloom filter
// Size is size of bloom filter in bytes
func bloomCached(bs Blockstore, ctx context.Context, bloomSize, hashCount int) (*bloomcache, error) {
bl, err := bloom.New(float64(bloomSize), float64(hashCount))
if err != nil {
return nil, err
}
bc := &bloomcache{blockstore: bs, bloom: bl}
bc.hits = metrics.NewCtx(ctx, "bloom.hits_total",
"Number of cache hits in bloom cache").Counter()
bc.total = metrics.NewCtx(ctx, "bloom_total",
"Total number of requests to bloom cache").Counter()
bc.Invalidate()
go bc.Rebuild(ctx)
if metrics.Active() {
go func() {
fill := metrics.NewCtx(ctx, "bloom_fill_ratio",
"Ratio of bloom filter fullnes, (updated once a minute)").Gauge()
<-bc.rebuildChan
t := time.NewTicker(1 * time.Minute)
for {
select {
case <-ctx.Done():
t.Stop()
return
case <-t.C:
fill.Set(bc.bloom.FillRatio())
}
}
}()
}
return bc, nil
}
示例9: Rebuild
func (b *bloomcache) Rebuild(ctx context.Context) {
evt := log.EventBegin(ctx, "bloomcache.Rebuild")
defer evt.Done()
ch, err := b.blockstore.AllKeysChan(ctx)
if err != nil {
log.Errorf("AllKeysChan failed in bloomcache rebuild with: %v", err)
return
}
finish := false
for !finish {
select {
case key, ok := <-ch:
if ok {
b.bloom.AddTS(key.Bytes()) // Use binary key, the more compact the better
} else {
finish = true
}
case <-ctx.Done():
log.Warning("Cache rebuild closed by context finishing.")
return
}
}
close(b.rebuildChan)
atomic.StoreInt32(&b.active, 1)
}
示例10: GetBlocks
func (e *offlineExchange) GetBlocks(ctx context.Context, ks []*cid.Cid) (<-chan blocks.Block, error) {
out := make(chan blocks.Block, 0)
go func() {
defer close(out)
var misses []*cid.Cid
for _, k := range ks {
hit, err := e.bs.Get(k)
if err != nil {
misses = append(misses, k)
// a long line of misses should abort when context is cancelled.
select {
// TODO case send misses down channel
case <-ctx.Done():
return
default:
continue
}
}
select {
case out <- hit:
case <-ctx.Done():
return
}
}
}()
return out, nil
}
示例11: pollForEntries
func (m *mdnsService) pollForEntries(ctx context.Context) {
ticker := time.NewTicker(m.interval)
for {
select {
case <-ticker.C:
entriesCh := make(chan *mdns.ServiceEntry, 16)
go func() {
for entry := range entriesCh {
m.handleEntry(entry)
}
}()
log.Debug("starting mdns query")
qp := &mdns.QueryParam{
Domain: "local",
Entries: entriesCh,
Service: ServiceTag,
Timeout: time.Second * 5,
}
err := mdns.Query(qp)
if err != nil {
log.Error("mdns lookup error: ", err)
}
close(entriesCh)
log.Debug("mdns query complete")
case <-ctx.Done():
log.Debug("mdns service halting")
return
}
}
}
示例12: WaitForResult
// WaitForResult wraps govmomi operations and wait the operation to complete.
// Return the operation result
// Sample usage:
// info, err := WaitForResult(ctx, func(ctx) (*TaskInfo, error) {
// return vm, vm.Reconfigure(ctx, config)
// })
func WaitForResult(ctx context.Context, f func(context.Context) (Task, error)) (*types.TaskInfo, error) {
var err error
var info *types.TaskInfo
var backoffFactor int64 = 1
for {
var t Task
if t, err = f(ctx); err == nil {
info, err = t.WaitForResult(ctx, nil)
if err == nil {
return info, err
}
}
if !isTaskInProgress(err) {
return info, err
}
sleepValue := time.Duration(backoffFactor * (rand.Int63n(100) + int64(50)))
select {
case <-time.After(sleepValue * time.Millisecond):
backoffFactor *= 2
if backoffFactor > maxBackoffFactor {
backoffFactor = maxBackoffFactor
}
case <-ctx.Done():
return info, ctx.Err()
}
log.Warnf("retrying task")
}
}
示例13: MountLabel
// MountLabel performs a mount with the label and target being absolute paths
func (t *BaseOperations) MountLabel(ctx context.Context, label, target string) error {
defer trace.End(trace.Begin(fmt.Sprintf("Mounting %s on %s", label, target)))
if err := os.MkdirAll(target, 0600); err != nil {
return fmt.Errorf("unable to create mount point %s: %s", target, err)
}
// convert the label to a filesystem path
label = "/dev/disk/by-label/" + label
// do..while ! timedout
var timeout bool
for timeout = false; !timeout; {
_, err := os.Stat(label)
if err == nil || !os.IsNotExist(err) {
break
}
deadline, ok := ctx.Deadline()
timeout = ok && time.Now().After(deadline)
}
if timeout {
detail := fmt.Sprintf("timed out waiting for %s to appear", label)
return errors.New(detail)
}
if err := Sys.Syscall.Mount(label, target, "ext4", syscall.MS_NOATIME, ""); err != nil {
detail := fmt.Sprintf("mounting %s on %s failed: %s", label, target, err)
return errors.New(detail)
}
return nil
}
示例14: getDiagnosticFromPeers
func (d *Diagnostics) getDiagnosticFromPeers(ctx context.Context, peers map[peer.ID]int, pmes *pb.Message) (<-chan *DiagInfo, error) {
respdata := make(chan *DiagInfo)
wg := sync.WaitGroup{}
for p := range peers {
wg.Add(1)
log.Debugf("Sending diagnostic request to peer: %s", p)
go func(p peer.ID) {
defer wg.Done()
out, err := d.getDiagnosticFromPeer(ctx, p, pmes)
if err != nil {
log.Debugf("Error getting diagnostic from %s: %s", p, err)
return
}
for d := range out {
select {
case respdata <- d:
case <-ctx.Done():
return
}
}
}(p)
}
go func() {
wg.Wait()
close(respdata)
}()
return respdata, nil
}
示例15: FromContext
// FromContext returns the User value stored in ctx, if any.
func FromContext(ctx context.Context) *Cmd {
e, ok := ctx.Value(cmdKey).(*Cmd)
if !ok {
panic(kerr.New("OQVLBQFQJW", "No cmd in ctx").Error())
}
return e
}