本文整理汇总了Golang中cmd/internal/obj.Link.Mode方法的典型用法代码示例。如果您正苦于以下问题:Golang Link.Mode方法的具体用法?Golang Link.Mode怎么用?Golang Link.Mode使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类cmd/internal/obj.Link
的用法示例。
在下文中一共展示了Link.Mode方法的3个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。
示例1: progedit
func progedit(ctxt *obj.Link, p *obj.Prog) {
// Maintain information about code generation mode.
if ctxt.Mode == 0 {
switch ctxt.Arch.Family {
default:
ctxt.Diag("unsupported arch family")
case sys.MIPS:
ctxt.Mode = Mips32
case sys.MIPS64:
ctxt.Mode = Mips64
}
}
p.From.Class = 0
p.To.Class = 0
// Rewrite JMP/JAL to symbol as TYPE_BRANCH.
switch p.As {
case AJMP,
AJAL,
ARET,
obj.ADUFFZERO,
obj.ADUFFCOPY:
if p.To.Sym != nil {
p.To.Type = obj.TYPE_BRANCH
}
}
// Rewrite float constants to values stored in memory.
switch p.As {
case AMOVF:
if p.From.Type == obj.TYPE_FCONST {
f32 := float32(p.From.Val.(float64))
i32 := math.Float32bits(f32)
if i32 == 0 {
p.As = AMOVW
p.From.Type = obj.TYPE_REG
p.From.Reg = REGZERO
break
}
literal := fmt.Sprintf("$f32.%08x", i32)
s := obj.Linklookup(ctxt, literal, 0)
s.Size = 4
p.From.Type = obj.TYPE_MEM
p.From.Sym = s
p.From.Name = obj.NAME_EXTERN
p.From.Offset = 0
}
case AMOVD:
if p.From.Type == obj.TYPE_FCONST {
i64 := math.Float64bits(p.From.Val.(float64))
if i64 == 0 && ctxt.Mode&Mips64 != 0 {
p.As = AMOVV
p.From.Type = obj.TYPE_REG
p.From.Reg = REGZERO
break
}
literal := fmt.Sprintf("$f64.%016x", i64)
s := obj.Linklookup(ctxt, literal, 0)
s.Size = 8
p.From.Type = obj.TYPE_MEM
p.From.Sym = s
p.From.Name = obj.NAME_EXTERN
p.From.Offset = 0
}
// Put >32-bit constants in memory and load them
case AMOVV:
if p.From.Type == obj.TYPE_CONST && p.From.Name == obj.NAME_NONE && p.From.Reg == 0 && int64(int32(p.From.Offset)) != p.From.Offset {
literal := fmt.Sprintf("$i64.%016x", uint64(p.From.Offset))
s := obj.Linklookup(ctxt, literal, 0)
s.Size = 8
p.From.Type = obj.TYPE_MEM
p.From.Sym = s
p.From.Name = obj.NAME_EXTERN
p.From.Offset = 0
}
}
// Rewrite SUB constants into ADD.
switch p.As {
case ASUB:
if p.From.Type == obj.TYPE_CONST {
p.From.Offset = -p.From.Offset
p.As = AADD
}
case ASUBU:
if p.From.Type == obj.TYPE_CONST {
p.From.Offset = -p.From.Offset
p.As = AADDU
}
case ASUBV:
if p.From.Type == obj.TYPE_CONST {
p.From.Offset = -p.From.Offset
p.As = AADDV
}
//.........这里部分代码省略.........
示例2: progedit
func progedit(ctxt *obj.Link, p *obj.Prog) {
// Maintain information about code generation mode.
if ctxt.Mode == 0 {
ctxt.Mode = ctxt.Arch.Regsize * 8
}
p.Mode = int8(ctxt.Mode)
switch p.As {
case AMODE:
if p.From.Type == obj.TYPE_CONST || (p.From.Type == obj.TYPE_MEM && p.From.Reg == REG_NONE) {
switch int(p.From.Offset) {
case 16, 32, 64:
ctxt.Mode = int(p.From.Offset)
}
}
obj.Nopout(p)
}
// Thread-local storage references use the TLS pseudo-register.
// As a register, TLS refers to the thread-local storage base, and it
// can only be loaded into another register:
//
// MOVQ TLS, AX
//
// An offset from the thread-local storage base is written off(reg)(TLS*1).
// Semantically it is off(reg), but the (TLS*1) annotation marks this as
// indexing from the loaded TLS base. This emits a relocation so that
// if the linker needs to adjust the offset, it can. For example:
//
// MOVQ TLS, AX
// MOVQ 0(AX)(TLS*1), CX // load g into CX
//
// On systems that support direct access to the TLS memory, this
// pair of instructions can be reduced to a direct TLS memory reference:
//
// MOVQ 0(TLS), CX // load g into CX
//
// The 2-instruction and 1-instruction forms correspond to the two code
// sequences for loading a TLS variable in the local exec model given in "ELF
// Handling For Thread-Local Storage".
//
// We apply this rewrite on systems that support the 1-instruction form.
// The decision is made using only the operating system and the -shared flag,
// not the link mode. If some link modes on a particular operating system
// require the 2-instruction form, then all builds for that operating system
// will use the 2-instruction form, so that the link mode decision can be
// delayed to link time.
//
// In this way, all supported systems use identical instructions to
// access TLS, and they are rewritten appropriately first here in
// liblink and then finally using relocations in the linker.
//
// When -shared is passed, we leave the code in the 2-instruction form but
// assemble (and relocate) them in different ways to generate the initial
// exec code sequence. It's a bit of a fluke that this is possible without
// rewriting the instructions more comprehensively, and it only does because
// we only support a single TLS variable (g).
if CanUse1InsnTLS(ctxt) {
// Reduce 2-instruction sequence to 1-instruction sequence.
// Sequences like
// MOVQ TLS, BX
// ... off(BX)(TLS*1) ...
// become
// NOP
// ... off(TLS) ...
//
// TODO(rsc): Remove the Hsolaris special case. It exists only to
// guarantee we are producing byte-identical binaries as before this code.
// But it should be unnecessary.
if (p.As == AMOVQ || p.As == AMOVL) && p.From.Type == obj.TYPE_REG && p.From.Reg == REG_TLS && p.To.Type == obj.TYPE_REG && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 && ctxt.Headtype != obj.Hsolaris {
obj.Nopout(p)
}
if p.From.Type == obj.TYPE_MEM && p.From.Index == REG_TLS && REG_AX <= p.From.Reg && p.From.Reg <= REG_R15 {
p.From.Reg = REG_TLS
p.From.Scale = 0
p.From.Index = REG_NONE
}
if p.To.Type == obj.TYPE_MEM && p.To.Index == REG_TLS && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 {
p.To.Reg = REG_TLS
p.To.Scale = 0
p.To.Index = REG_NONE
}
} else {
// load_g_cx, below, always inserts the 1-instruction sequence. Rewrite it
// as the 2-instruction sequence if necessary.
// MOVQ 0(TLS), BX
// becomes
// MOVQ TLS, BX
// MOVQ 0(BX)(TLS*1), BX
if (p.As == AMOVQ || p.As == AMOVL) && p.From.Type == obj.TYPE_MEM && p.From.Reg == REG_TLS && p.To.Type == obj.TYPE_REG && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 {
q := obj.Appendp(ctxt, p)
q.As = p.As
q.From = p.From
q.From.Type = obj.TYPE_MEM
q.From.Reg = p.To.Reg
q.From.Index = REG_TLS
q.From.Scale = 2 // TODO: use 1
q.To = p.To
//.........这里部分代码省略.........
示例3: progedit
func progedit(ctxt *obj.Link, p *obj.Prog) {
// Maintain information about code generation mode.
if ctxt.Mode == 0 {
ctxt.Mode = ctxt.Arch.Regsize * 8
}
p.Mode = int8(ctxt.Mode)
switch p.As {
case AMODE:
if p.From.Type == obj.TYPE_CONST || (p.From.Type == obj.TYPE_MEM && p.From.Reg == REG_NONE) {
switch int(p.From.Offset) {
case 16, 32, 64:
ctxt.Mode = int(p.From.Offset)
}
}
obj.Nopout(p)
}
// Thread-local storage references use the TLS pseudo-register.
// As a register, TLS refers to the thread-local storage base, and it
// can only be loaded into another register:
//
// MOVQ TLS, AX
//
// An offset from the thread-local storage base is written off(reg)(TLS*1).
// Semantically it is off(reg), but the (TLS*1) annotation marks this as
// indexing from the loaded TLS base. This emits a relocation so that
// if the linker needs to adjust the offset, it can. For example:
//
// MOVQ TLS, AX
// MOVQ 8(AX)(TLS*1), CX // load m into CX
//
// On systems that support direct access to the TLS memory, this
// pair of instructions can be reduced to a direct TLS memory reference:
//
// MOVQ 8(TLS), CX // load m into CX
//
// The 2-instruction and 1-instruction forms correspond roughly to
// ELF TLS initial exec mode and ELF TLS local exec mode, respectively.
//
// We applies this rewrite on systems that support the 1-instruction form.
// The decision is made using only the operating system (and probably
// the -shared flag, eventually), not the link mode. If some link modes
// on a particular operating system require the 2-instruction form,
// then all builds for that operating system will use the 2-instruction
// form, so that the link mode decision can be delayed to link time.
//
// In this way, all supported systems use identical instructions to
// access TLS, and they are rewritten appropriately first here in
// liblink and then finally using relocations in the linker.
if canuselocaltls(ctxt) {
// Reduce TLS initial exec model to TLS local exec model.
// Sequences like
// MOVQ TLS, BX
// ... off(BX)(TLS*1) ...
// become
// NOP
// ... off(TLS) ...
//
// TODO(rsc): Remove the Hsolaris special case. It exists only to
// guarantee we are producing byte-identical binaries as before this code.
// But it should be unnecessary.
if (p.As == AMOVQ || p.As == AMOVL) && p.From.Type == obj.TYPE_REG && p.From.Reg == REG_TLS && p.To.Type == obj.TYPE_REG && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 && ctxt.Headtype != obj.Hsolaris {
obj.Nopout(p)
}
if p.From.Type == obj.TYPE_MEM && p.From.Index == REG_TLS && REG_AX <= p.From.Reg && p.From.Reg <= REG_R15 {
p.From.Reg = REG_TLS
p.From.Scale = 0
p.From.Index = REG_NONE
}
if p.To.Type == obj.TYPE_MEM && p.To.Index == REG_TLS && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 {
p.To.Reg = REG_TLS
p.To.Scale = 0
p.To.Index = REG_NONE
}
} else {
// As a courtesy to the C compilers, rewrite TLS local exec load as TLS initial exec load.
// The instruction
// MOVQ off(TLS), BX
// becomes the sequence
// MOVQ TLS, BX
// MOVQ off(BX)(TLS*1), BX
// This allows the C compilers to emit references to m and g using the direct off(TLS) form.
if (p.As == AMOVQ || p.As == AMOVL) && p.From.Type == obj.TYPE_MEM && p.From.Reg == REG_TLS && p.To.Type == obj.TYPE_REG && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 {
q := obj.Appendp(ctxt, p)
q.As = p.As
q.From = p.From
q.From.Type = obj.TYPE_MEM
q.From.Reg = p.To.Reg
q.From.Index = REG_TLS
q.From.Scale = 2 // TODO: use 1
q.To = p.To
p.From.Type = obj.TYPE_REG
p.From.Reg = REG_TLS
p.From.Index = REG_NONE
p.From.Offset = 0
}
}
//.........这里部分代码省略.........