Golang obj.Link类代码示例

func nacladdr(ctxt *obj.Link, p *obj.Prog, a *obj.Addr) {
	if p.As == ALEAL || p.As == ALEAQ {
		return
	}

	if a.Reg == REG_BP {
		ctxt.Diag("invalid address: %v", p)
		return
	}

	if a.Reg == REG_TLS {
		a.Reg = REG_BP
	}
	if a.Type == obj.TYPE_MEM && a.Name == obj.NAME_NONE {
		switch a.Reg {
		// all ok
		case REG_BP, REG_SP, REG_R15:
			break

		default:
			if a.Index != REG_NONE {
				ctxt.Diag("invalid address %v", p)
			}
			a.Index = a.Reg
			if a.Index != REG_NONE {
				a.Scale = 1
			}
			a.Reg = REG_R15
		}
	}
}

func initdiv(ctxt *obj.Link) {
	if ctxt.Sym_div != nil {
		return
	}
	ctxt.Sym_div = obj.Linklookup(ctxt, "_div", 0)
	ctxt.Sym_divu = obj.Linklookup(ctxt, "_divu", 0)
	ctxt.Sym_mod = obj.Linklookup(ctxt, "_mod", 0)
	ctxt.Sym_modu = obj.Linklookup(ctxt, "_modu", 0)
}

func follow(ctxt *obj.Link, s *obj.LSym) {
	ctxt.Cursym = s

	firstp := ctxt.NewProg()
	lastp := firstp
	xfol(ctxt, s.Text, &lastp)
	lastp.Link = nil
	s.Text = firstp.Link
}

func addnop(ctxt *obj.Link, p *obj.Prog) {
	q := ctxt.NewProg()
	// we want to use the canonical NOP (SLL $0,R0,R0) here,
	// however, as the assembler will always replace $0
	// as R0, we have to resort to manually encode the SLL
	// instruction as WORD $0.
	q.As = AWORD
	q.Lineno = p.Lineno
	q.From.Type = obj.TYPE_CONST
	q.From.Name = obj.NAME_NONE
	q.From.Offset = 0

	q.Link = p.Link
	p.Link = q
}

func oplook(ctxt *obj.Link, p *obj.Prog) *Optab {
	if oprange[AOR&obj.AMask] == nil {
		buildop(ctxt)
	}

	a1 := int(p.Optab)
	if a1 != 0 {
		return &optab[a1-1]
	}
	a1 = int(p.From.Class)
	if a1 == 0 {
		a1 = aclass(ctxt, &p.From) + 1
		p.From.Class = int8(a1)
	}

	a1--
	a3 := int(p.To.Class)
	if a3 == 0 {
		a3 = aclass(ctxt, &p.To) + 1
		p.To.Class = int8(a3)
	}

	a3--
	a2 := C_NONE
	if p.Reg != 0 {
		a2 = C_REG
	}

	//print("oplook %P %d %d %d\n", p, a1, a2, a3);

	ops := oprange[p.As&obj.AMask]
	c1 := &xcmp[a1]
	c3 := &xcmp[a3]
	for i := range ops {
		op := &ops[i]
		if int(op.a2) == a2 && c1[op.a1] && c3[op.a3] {
			p.Optab = uint16(cap(optab) - cap(ops) + i + 1)
			return op
		}
	}

	ctxt.Diag("illegal combination %v %v %v %v", obj.Aconv(p.As), DRconv(a1), DRconv(a2), DRconv(a3))
	prasm(p)
	if ops == nil {
		ops = optab
	}
	return &ops[0]
}

// Rewrite p, if necessary, to access global data via the global offset table.
func rewriteToUseGot(ctxt *obj.Link, p *obj.Prog) {
	if p.As == obj.ADUFFCOPY || p.As == obj.ADUFFZERO {
		//     ADUFFxxx $offset
		// becomes
		//     MOVW [email protected], R9
		//     ADD $offset, R9
		//     CALL (R9)
		var sym *obj.LSym
		if p.As == obj.ADUFFZERO {
			sym = obj.Linklookup(ctxt, "runtime.duffzero", 0)
		} else {
			sym = obj.Linklookup(ctxt, "runtime.duffcopy", 0)
		}
		offset := p.To.Offset
		p.As = AMOVW
		p.From.Type = obj.TYPE_MEM
		p.From.Name = obj.NAME_GOTREF
		p.From.Sym = sym
		p.To.Type = obj.TYPE_REG
		p.To.Reg = REG_R9
		p.To.Name = obj.NAME_NONE
		p.To.Offset = 0
		p.To.Sym = nil
		p1 := obj.Appendp(ctxt, p)
		p1.As = AADD
		p1.From.Type = obj.TYPE_CONST
		p1.From.Offset = offset
		p1.To.Type = obj.TYPE_REG
		p1.To.Reg = REG_R9
		p2 := obj.Appendp(ctxt, p1)
		p2.As = obj.ACALL
		p2.To.Type = obj.TYPE_MEM
		p2.To.Reg = REG_R9
		return
	}

	// We only care about global data: NAME_EXTERN means a global
	// symbol in the Go sense, and p.Sym.Local is true for a few
	// internally defined symbols.
	if p.From.Type == obj.TYPE_ADDR && p.From.Name == obj.NAME_EXTERN && !p.From.Sym.Local {
		// MOVW $sym, Rx becomes MOVW [email protected], Rx
		// MOVW $sym+<off>, Rx becomes MOVW [email protected], Rx; ADD <off>, Rx
		if p.As != AMOVW {
			ctxt.Diag("do not know how to handle TYPE_ADDR in %v with -dynlink", p)
		}
		if p.To.Type != obj.TYPE_REG {
			ctxt.Diag("do not know how to handle LEAQ-type insn to non-register in %v with -dynlink", p)
		}
		p.From.Type = obj.TYPE_MEM
		p.From.Name = obj.NAME_GOTREF
		if p.From.Offset != 0 {
			q := obj.Appendp(ctxt, p)
			q.As = AADD
			q.From.Type = obj.TYPE_CONST
			q.From.Offset = p.From.Offset
			q.To = p.To
			p.From.Offset = 0
		}
	}
	if p.From3 != nil && p.From3.Name == obj.NAME_EXTERN {
		ctxt.Diag("don't know how to handle %v with -dynlink", p)
	}
	var source *obj.Addr
	// MOVx sym, Ry becomes MOVW [email protected], R9; MOVx (R9), Ry
	// MOVx Ry, sym becomes MOVW [email protected], R9; MOVx Ry, (R9)
	// An addition may be inserted between the two MOVs if there is an offset.
	if p.From.Name == obj.NAME_EXTERN && !p.From.Sym.Local {
		if p.To.Name == obj.NAME_EXTERN && !p.To.Sym.Local {
			ctxt.Diag("cannot handle NAME_EXTERN on both sides in %v with -dynlink", p)
		}
		source = &p.From
	} else if p.To.Name == obj.NAME_EXTERN && !p.To.Sym.Local {
		source = &p.To
	} else {
		return
	}
	if p.As == obj.ATEXT || p.As == obj.AFUNCDATA || p.As == obj.ACALL || p.As == obj.ARET || p.As == obj.AJMP {
		return
	}
	if source.Sym.Type == obj.STLSBSS {
		return
	}
	if source.Type != obj.TYPE_MEM {
		ctxt.Diag("don't know how to handle %v with -dynlink", p)
	}
	p1 := obj.Appendp(ctxt, p)
	p2 := obj.Appendp(ctxt, p1)

	p1.As = AMOVW
	p1.From.Type = obj.TYPE_MEM
	p1.From.Sym = source.Sym
	p1.From.Name = obj.NAME_GOTREF
	p1.To.Type = obj.TYPE_REG
	p1.To.Reg = REG_R9

	p2.As = p.As
	p2.From = p.From
	p2.To = p.To
	if p.From.Name == obj.NAME_EXTERN {
//.........这里部分代码省略.........

func xfol(ctxt *obj.Link, p *obj.Prog, last **obj.Prog) {
	var q *obj.Prog
	var r *obj.Prog
	var b obj.As

	for p != nil {
		a := p.As
		if a == ABR {
			q = p.Pcond
			if (p.Mark&NOSCHED != 0) || q != nil && (q.Mark&NOSCHED != 0) {
				p.Mark |= FOLL
				(*last).Link = p
				*last = p
				(*last).Pc = pc_cnt
				pc_cnt += 1
				p = p.Link
				xfol(ctxt, p, last)
				p = q
				if p != nil && p.Mark&FOLL == 0 {
					continue
				}
				return
			}

			if q != nil {
				p.Mark |= FOLL
				p = q
				if p.Mark&FOLL == 0 {
					continue
				}
			}
		}

		if p.Mark&FOLL != 0 {
			q = p
			for i := 0; i < 4; i, q = i+1, q.Link {
				if q == *last || (q.Mark&NOSCHED != 0) {
					break
				}
				b = 0 /* set */
				a = q.As
				if a == obj.ANOP {
					i--
					continue
				}
				if a != ABR && a != obj.ARET {
					if q.Pcond == nil || (q.Pcond.Mark&FOLL != 0) {
						continue
					}
					b = relinv(a)
					if b == 0 {
						continue
					}
				}

				for {
					r = ctxt.NewProg()
					*r = *p
					if r.Mark&FOLL == 0 {
						fmt.Printf("can't happen 1\n")
					}
					r.Mark |= FOLL
					if p != q {
						p = p.Link
						(*last).Link = r
						*last = r
						(*last).Pc = pc_cnt
						pc_cnt += 1
						continue
					}

					(*last).Link = r
					*last = r
					(*last).Pc = pc_cnt
					pc_cnt += 1
					if a == ABR || a == obj.ARET {
						return
					}
					r.As = b
					r.Pcond = p.Link
					r.Link = p.Pcond
					if r.Link.Mark&FOLL == 0 {
						xfol(ctxt, r.Link, last)
					}
					if r.Pcond.Mark&FOLL == 0 {
						fmt.Printf("can't happen 2\n")
					}
					return
				}
			}

			a = ABR
			q = ctxt.NewProg()
			q.As = a
			q.Lineno = p.Lineno
			q.To.Type = obj.TYPE_BRANCH
			q.To.Offset = p.Pc
			q.Pcond = p
			p = q
		}
//.........这里部分代码省略.........

func preprocess(ctxt *obj.Link, cursym *obj.LSym) {
	// TODO(minux): add morestack short-cuts with small fixed frame-size.
	ctxt.Cursym = cursym

	if cursym.Text == nil || cursym.Text.Link == nil {
		return
	}

	p := cursym.Text
	textstksiz := p.To.Offset
	if textstksiz == -8 {
		// Compatibility hack.
		p.From3.Offset |= obj.NOFRAME
		textstksiz = 0
	}
	if textstksiz%8 != 0 {
		ctxt.Diag("frame size %d not a multiple of 8", textstksiz)
	}
	if p.From3.Offset&obj.NOFRAME != 0 {
		if textstksiz != 0 {
			ctxt.Diag("NOFRAME functions must have a frame size of 0, not %d", textstksiz)
		}
	}

	cursym.Args = p.To.Val.(int32)
	cursym.Locals = int32(textstksiz)

	/*
	 * find leaf subroutines
	 * strip NOPs
	 * expand RET
	 * expand BECOME pseudo
	 */
	if ctxt.Debugvlog != 0 {
		fmt.Fprintf(ctxt.Bso, "%5.2f noops\n", obj.Cputime())
	}
	ctxt.Bso.Flush()

	var q *obj.Prog
	var q1 *obj.Prog
	for p := cursym.Text; p != nil; p = p.Link {
		switch p.As {
		/* too hard, just leave alone */
		case obj.ATEXT:
			q = p

			p.Mark |= LABEL | LEAF | SYNC
			if p.Link != nil {
				p.Link.Mark |= LABEL
			}

		case ANOR:
			q = p
			if p.To.Type == obj.TYPE_REG {
				if p.To.Reg == REGZERO {
					p.Mark |= LABEL | SYNC
				}
			}

		case ASYNC,
			AWORD:
			q = p
			p.Mark |= LABEL | SYNC
			continue

		case AMOVW, AMOVWZ, AMOVD:
			q = p
			if p.From.Reg >= REG_RESERVED || p.To.Reg >= REG_RESERVED {
				p.Mark |= LABEL | SYNC
			}
			continue

		case AFABS,
			AFADD,
			AFDIV,
			AFMADD,
			AFMOVD,
			AFMOVS,
			AFMSUB,
			AFMUL,
			AFNABS,
			AFNEG,
			AFNMADD,
			AFNMSUB,
			ALEDBR,
			ALDEBR,
			AFSUB:
			q = p

			p.Mark |= FLOAT
			continue

		case ABL,
			ABCL,
			obj.ADUFFZERO,
			obj.ADUFFCOPY:
			cursym.Text.Mark &^= LEAF
			fallthrough

		case ABC,
//.........这里部分代码省略.........

// Rewrite p, if necessary, to access global data via the global offset table.
func rewriteToUseGot(ctxt *obj.Link, p *obj.Prog) {
	// At the moment EXRL instructions are not emitted by the compiler and only reference local symbols in
	// assembly code.
	if p.As == AEXRL {
		return
	}

	// We only care about global data: NAME_EXTERN means a global
	// symbol in the Go sense, and p.Sym.Local is true for a few
	// internally defined symbols.
	if p.From.Type == obj.TYPE_ADDR && p.From.Name == obj.NAME_EXTERN && !p.From.Sym.Local {
		// MOVD $sym, Rx becomes MOVD [email protected], Rx
		// MOVD $sym+<off>, Rx becomes MOVD [email protected], Rx; ADD <off>, Rx
		if p.To.Type != obj.TYPE_REG || p.As != AMOVD {
			ctxt.Diag("do not know how to handle LEA-type insn to non-register in %v with -dynlink", p)
		}
		p.From.Type = obj.TYPE_MEM
		p.From.Name = obj.NAME_GOTREF
		q := p
		if p.From.Offset != 0 {
			q = obj.Appendp(ctxt, p)
			q.As = AADD
			q.From.Type = obj.TYPE_CONST
			q.From.Offset = p.From.Offset
			q.To = p.To
			p.From.Offset = 0
		}
	}
	if p.From3 != nil && p.From3.Name == obj.NAME_EXTERN {
		ctxt.Diag("don't know how to handle %v with -dynlink", p)
	}
	var source *obj.Addr
	// MOVD sym, Ry becomes MOVD [email protected], REGTMP; MOVD (REGTMP), Ry
	// MOVD Ry, sym becomes MOVD [email protected], REGTMP; MOVD Ry, (REGTMP)
	// An addition may be inserted between the two MOVs if there is an offset.
	if p.From.Name == obj.NAME_EXTERN && !p.From.Sym.Local {
		if p.To.Name == obj.NAME_EXTERN && !p.To.Sym.Local {
			ctxt.Diag("cannot handle NAME_EXTERN on both sides in %v with -dynlink", p)
		}
		source = &p.From
	} else if p.To.Name == obj.NAME_EXTERN && !p.To.Sym.Local {
		source = &p.To
	} else {
		return
	}
	if p.As == obj.ATEXT || p.As == obj.AFUNCDATA || p.As == obj.ACALL || p.As == obj.ARET || p.As == obj.AJMP {
		return
	}
	if source.Sym.Type == obj.STLSBSS {
		return
	}
	if source.Type != obj.TYPE_MEM {
		ctxt.Diag("don't know how to handle %v with -dynlink", p)
	}
	p1 := obj.Appendp(ctxt, p)
	p2 := obj.Appendp(ctxt, p1)

	p1.As = AMOVD
	p1.From.Type = obj.TYPE_MEM
	p1.From.Sym = source.Sym
	p1.From.Name = obj.NAME_GOTREF
	p1.To.Type = obj.TYPE_REG
	p1.To.Reg = REGTMP

	p2.As = p.As
	p2.From = p.From
	p2.To = p.To
	if p.From.Name == obj.NAME_EXTERN {
		p2.From.Reg = REGTMP
		p2.From.Name = obj.NAME_NONE
		p2.From.Sym = nil
	} else if p.To.Name == obj.NAME_EXTERN {
		p2.To.Reg = REGTMP
		p2.To.Name = obj.NAME_NONE
		p2.To.Sym = nil
	} else {
		return
	}
	obj.Nopout(p)
}

func preprocess(ctxt *obj.Link, cursym *obj.LSym) {
	ctxt.Cursym = cursym

	if cursym.Text == nil || cursym.Text.Link == nil {
		return
	}

	p := cursym.Text
	textstksiz := p.To.Offset
	aoffset := int32(textstksiz)

	cursym.Args = p.To.Val.(int32)
	cursym.Locals = int32(textstksiz)

	/*
	 * find leaf subroutines
	 * strip NOPs
	 * expand RET
	 */
	ctxt.Bso.Flush()
	q := (*obj.Prog)(nil)
	var q1 *obj.Prog
	for p := cursym.Text; p != nil; p = p.Link {
		switch p.As {
		case obj.ATEXT:
			p.Mark |= LEAF

		case obj.ARET:
			break

		case obj.ANOP:
			q1 = p.Link
			q.Link = q1 /* q is non-nop */
			q1.Mark |= p.Mark
			continue

		case ABL,
			obj.ADUFFZERO,
			obj.ADUFFCOPY:
			cursym.Text.Mark &^= LEAF
			fallthrough

		case ACBNZ,
			ACBZ,
			ACBNZW,
			ACBZW,
			ATBZ,
			ATBNZ,
			AB,
			ABEQ,
			ABNE,
			ABCS,
			ABHS,
			ABCC,
			ABLO,
			ABMI,
			ABPL,
			ABVS,
			ABVC,
			ABHI,
			ABLS,
			ABGE,
			ABLT,
			ABGT,
			ABLE,
			AADR, /* strange */
			AADRP:
			q1 = p.Pcond

			if q1 != nil {
				for q1.As == obj.ANOP {
					q1 = q1.Link
					p.Pcond = q1
				}
			}

			break
		}

		q = p
	}

	var q2 *obj.Prog
	var retjmp *obj.LSym
	for p := cursym.Text; p != nil; p = p.Link {
		o := p.As
		switch o {
		case obj.ATEXT:
			cursym.Text = p
			if textstksiz < 0 {
				ctxt.Autosize = 0
			} else {
				ctxt.Autosize = int32(textstksiz + 8)
			}
			if (cursym.Text.Mark&LEAF != 0) && ctxt.Autosize <= 8 {
				ctxt.Autosize = 0
			} else if ctxt.Autosize&(16-1) != 0 {
				// The frame includes an LR.
				// If the frame size is 8, it's only an LR,
				// so there's no potential for breaking references to
//.........这里部分代码省略.........

func progedit(ctxt *obj.Link, p *obj.Prog) {
	// Maintain information about code generation mode.
	if ctxt.Mode == 0 {
		ctxt.Mode = ctxt.Arch.RegSize * 8
	}
	p.Mode = int8(ctxt.Mode)

	switch p.As {
	case AMODE:
		if p.From.Type == obj.TYPE_CONST || (p.From.Type == obj.TYPE_MEM && p.From.Reg == REG_NONE) {
			switch int(p.From.Offset) {
			case 16, 32, 64:
				ctxt.Mode = int(p.From.Offset)
			}
		}
		obj.Nopout(p)
	}

	// Thread-local storage references use the TLS pseudo-register.
	// As a register, TLS refers to the thread-local storage base, and it
	// can only be loaded into another register:
	//
	//         MOVQ TLS, AX
	//
	// An offset from the thread-local storage base is written off(reg)(TLS*1).
	// Semantically it is off(reg), but the (TLS*1) annotation marks this as
	// indexing from the loaded TLS base. This emits a relocation so that
	// if the linker needs to adjust the offset, it can. For example:
	//
	//         MOVQ TLS, AX
	//         MOVQ 0(AX)(TLS*1), CX // load g into CX
	//
	// On systems that support direct access to the TLS memory, this
	// pair of instructions can be reduced to a direct TLS memory reference:
	//
	//         MOVQ 0(TLS), CX // load g into CX
	//
	// The 2-instruction and 1-instruction forms correspond to the two code
	// sequences for loading a TLS variable in the local exec model given in "ELF
	// Handling For Thread-Local Storage".
	//
	// We apply this rewrite on systems that support the 1-instruction form.
	// The decision is made using only the operating system and the -shared flag,
	// not the link mode. If some link modes on a particular operating system
	// require the 2-instruction form, then all builds for that operating system
	// will use the 2-instruction form, so that the link mode decision can be
	// delayed to link time.
	//
	// In this way, all supported systems use identical instructions to
	// access TLS, and they are rewritten appropriately first here in
	// liblink and then finally using relocations in the linker.
	//
	// When -shared is passed, we leave the code in the 2-instruction form but
	// assemble (and relocate) them in different ways to generate the initial
	// exec code sequence. It's a bit of a fluke that this is possible without
	// rewriting the instructions more comprehensively, and it only does because
	// we only support a single TLS variable (g).

	if CanUse1InsnTLS(ctxt) {
		// Reduce 2-instruction sequence to 1-instruction sequence.
		// Sequences like
		//	MOVQ TLS, BX
		//	... off(BX)(TLS*1) ...
		// become
		//	NOP
		//	... off(TLS) ...
		//
		// TODO(rsc): Remove the Hsolaris special case. It exists only to
		// guarantee we are producing byte-identical binaries as before this code.
		// But it should be unnecessary.
		if (p.As == AMOVQ || p.As == AMOVL) && p.From.Type == obj.TYPE_REG && p.From.Reg == REG_TLS && p.To.Type == obj.TYPE_REG && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 && ctxt.Headtype != obj.Hsolaris {
			obj.Nopout(p)
		}
		if p.From.Type == obj.TYPE_MEM && p.From.Index == REG_TLS && REG_AX <= p.From.Reg && p.From.Reg <= REG_R15 {
			p.From.Reg = REG_TLS
			p.From.Scale = 0
			p.From.Index = REG_NONE
		}

		if p.To.Type == obj.TYPE_MEM && p.To.Index == REG_TLS && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 {
			p.To.Reg = REG_TLS
			p.To.Scale = 0
			p.To.Index = REG_NONE
		}
	} else {
		// load_g_cx, below, always inserts the 1-instruction sequence. Rewrite it
		// as the 2-instruction sequence if necessary.
		//	MOVQ 0(TLS), BX
		// becomes
		//	MOVQ TLS, BX
		//	MOVQ 0(BX)(TLS*1), BX
		if (p.As == AMOVQ || p.As == AMOVL) && p.From.Type == obj.TYPE_MEM && p.From.Reg == REG_TLS && p.To.Type == obj.TYPE_REG && REG_AX <= p.To.Reg && p.To.Reg <= REG_R15 {
			q := obj.Appendp(ctxt, p)
			q.As = p.As
			q.From = p.From
			q.From.Type = obj.TYPE_MEM
			q.From.Reg = p.To.Reg
			q.From.Index = REG_TLS
			q.From.Scale = 2 // TODO: use 1
			q.To = p.To
//.........这里部分代码省略.........

func span0(ctxt *obj.Link, cursym *obj.LSym) {
	p := cursym.Text
	if p == nil || p.Link == nil { // handle external functions and ELF section symbols
		return
	}
	ctxt.Cursym = cursym
	ctxt.Autosize = int32(p.To.Offset + 8)

	if oprange[AOR&obj.AMask] == nil {
		buildop(ctxt)
	}

	c := int64(0)
	p.Pc = c

	var m int
	var o *Optab
	for p = p.Link; p != nil; p = p.Link {
		ctxt.Curp = p
		p.Pc = c
		o = oplook(ctxt, p)
		m = int(o.size)
		if m == 0 {
			if p.As != obj.ANOP && p.As != obj.AFUNCDATA && p.As != obj.APCDATA && p.As != obj.AUSEFIELD {
				ctxt.Diag("zero-width instruction\n%v", p)
			}
			continue
		}

		c += int64(m)
	}

	cursym.Size = c

	/*
	 * if any procedure is large enough to
	 * generate a large SBRA branch, then
	 * generate extra passes putting branches
	 * around jmps to fix. this is rare.
	 */
	bflag := 1

	var otxt int64
	var q *obj.Prog
	for bflag != 0 {
		if ctxt.Debugvlog != 0 {
			fmt.Fprintf(ctxt.Bso, "%5.2f span1\n", obj.Cputime())
		}
		bflag = 0
		c = 0
		for p = cursym.Text.Link; p != nil; p = p.Link {
			p.Pc = c
			o = oplook(ctxt, p)

			// very large conditional branches
			if o.type_ == 6 && p.Pcond != nil {
				otxt = p.Pcond.Pc - c
				if otxt < -(1<<17)+10 || otxt >= (1<<17)-10 {
					q = ctxt.NewProg()
					q.Link = p.Link
					p.Link = q
					q.As = AJMP
					q.Lineno = p.Lineno
					q.To.Type = obj.TYPE_BRANCH
					q.Pcond = p.Pcond
					p.Pcond = q
					q = ctxt.NewProg()
					q.Link = p.Link
					p.Link = q
					q.As = AJMP
					q.Lineno = p.Lineno
					q.To.Type = obj.TYPE_BRANCH
					q.Pcond = q.Link.Link

					addnop(ctxt, p.Link)
					addnop(ctxt, p)
					bflag = 1
				}
			}

			m = int(o.size)
			if m == 0 {
				if p.As != obj.ANOP && p.As != obj.AFUNCDATA && p.As != obj.APCDATA && p.As != obj.AUSEFIELD {
					ctxt.Diag("zero-width instruction\n%v", p)
				}
				continue
			}

			c += int64(m)
		}

		cursym.Size = c
	}

	c += -c & (FuncAlign - 1)
	cursym.Size = c

	/*
	 * lay out the code, emitting code and data relocations.
	 */
//.........这里部分代码省略.........

func softfloat(ctxt *obj.Link, cursym *obj.LSym) {
	if ctxt.Goarm > 5 {
		return
	}

	symsfloat := obj.Linklookup(ctxt, "_sfloat", 0)

	wasfloat := 0
	for p := cursym.Text; p != nil; p = p.Link {
		if p.Pcond != nil {
			p.Pcond.Mark |= LABEL
		}
	}
	var next *obj.Prog
	for p := cursym.Text; p != nil; p = p.Link {
		switch p.As {
		case AMOVW:
			if isfloatreg(&p.To) || isfloatreg(&p.From) {
				goto soft
			}
			goto notsoft

		case AMOVWD,
			AMOVWF,
			AMOVDW,
			AMOVFW,
			AMOVFD,
			AMOVDF,
			AMOVF,
			AMOVD,
			ACMPF,
			ACMPD,
			AADDF,
			AADDD,
			ASUBF,
			ASUBD,
			AMULF,
			AMULD,
			ADIVF,
			ADIVD,
			ASQRTF,
			ASQRTD,
			AABSF,
			AABSD:
			goto soft

		default:
			goto notsoft
		}

	soft:
		if wasfloat == 0 || (p.Mark&LABEL != 0) {
			next = ctxt.NewProg()
			*next = *p

			// BL _sfloat(SB)
			*p = obj.Prog{}
			p.Ctxt = ctxt
			p.Link = next
			p.As = ABL
			p.To.Type = obj.TYPE_BRANCH
			p.To.Sym = symsfloat
			p.Lineno = next.Lineno

			p = next
			wasfloat = 1
		}

		continue

	notsoft:
		wasfloat = 0
	}
}

func preprocess(ctxt *obj.Link, cursym *obj.LSym) {
	// TODO(minux): add morestack short-cuts with small fixed frame-size.
	ctxt.Cursym = cursym

	if cursym.Text == nil || cursym.Text.Link == nil {
		return
	}

	p := cursym.Text
	textstksiz := p.To.Offset
	if textstksiz == -8 {
		// Compatibility hack.
		p.From3.Offset |= obj.NOFRAME
		textstksiz = 0
	}
	if textstksiz%8 != 0 {
		ctxt.Diag("frame size %d not a multiple of 8", textstksiz)
	}
	if p.From3.Offset&obj.NOFRAME != 0 {
		if textstksiz != 0 {
			ctxt.Diag("NOFRAME functions must have a frame size of 0, not %d", textstksiz)
		}
	}

	cursym.Args = p.To.Val.(int32)
	cursym.Locals = int32(textstksiz)

	/*
	 * find leaf subroutines
	 * strip NOPs
	 * expand RET
	 * expand BECOME pseudo
	 */
	if ctxt.Debugvlog != 0 {
		fmt.Fprintf(ctxt.Bso, "%5.2f noops\n", obj.Cputime())
	}
	ctxt.Bso.Flush()

	var q *obj.Prog
	var q1 *obj.Prog
	for p := cursym.Text; p != nil; p = p.Link {
		switch p.As {
		/* too hard, just leave alone */
		case obj.ATEXT:
			q = p

			p.Mark |= LABEL | LEAF | SYNC
			if p.Link != nil {
				p.Link.Mark |= LABEL
			}

		case ANOR:
			q = p
			if p.To.Type == obj.TYPE_REG {
				if p.To.Reg == REGZERO {
					p.Mark |= LABEL | SYNC
				}
			}

		case ALWAR,
			ALBAR,
			ASTBCCC,
			ASTWCCC,
			AECIWX,
			AECOWX,
			AEIEIO,
			AICBI,
			AISYNC,
			ATLBIE,
			ATLBIEL,
			ASLBIA,
			ASLBIE,
			ASLBMFEE,
			ASLBMFEV,
			ASLBMTE,
			ADCBF,
			ADCBI,
			ADCBST,
			ADCBT,
			ADCBTST,
			ADCBZ,
			ASYNC,
			ATLBSYNC,
			APTESYNC,
			ALWSYNC,
			ATW,
			AWORD,
			ARFI,
			ARFCI,
			ARFID,
			AHRFID:
			q = p
			p.Mark |= LABEL | SYNC
			continue

		case AMOVW, AMOVWZ, AMOVD:
			q = p
			if p.From.Reg >= REG_SPECIAL || p.To.Reg >= REG_SPECIAL {
				p.Mark |= LABEL | SYNC
			}
//.........这里部分代码省略.........

func xfol(ctxt *obj.Link, p *obj.Prog, last **obj.Prog) {
	var q *obj.Prog
	var r *obj.Prog
	var b obj.As
	var i int

loop:
	if p == nil {
		return
	}
	a := p.As
	if a == ABR {
		q = p.Pcond
		if (p.Mark&NOSCHED != 0) || q != nil && (q.Mark&NOSCHED != 0) {
			p.Mark |= FOLL
			(*last).Link = p
			*last = p
			p = p.Link
			xfol(ctxt, p, last)
			p = q
			if p != nil && p.Mark&FOLL == 0 {
				goto loop
			}
			return
		}

		if q != nil {
			p.Mark |= FOLL
			p = q
			if p.Mark&FOLL == 0 {
				goto loop
			}
		}
	}

	if p.Mark&FOLL != 0 {
		i = 0
		q = p
		for ; i < 4; i, q = i+1, q.Link {
			if q == *last || (q.Mark&NOSCHED != 0) {
				break
			}
			b = 0 /* set */
			a = q.As
			if a == obj.ANOP {
				i--
				continue
			}

			if a == ABR || a == obj.ARET || a == ARFI || a == ARFCI || a == ARFID || a == AHRFID {
				goto copy
			}
			if q.Pcond == nil || (q.Pcond.Mark&FOLL != 0) {
				continue
			}
			b = relinv(a)
			if b == 0 {
				continue
			}

		copy:
			for {
				r = ctxt.NewProg()
				*r = *p
				if r.Mark&FOLL == 0 {
					fmt.Printf("can't happen 1\n")
				}
				r.Mark |= FOLL
				if p != q {
					p = p.Link
					(*last).Link = r
					*last = r
					continue
				}

				(*last).Link = r
				*last = r
				if a == ABR || a == obj.ARET || a == ARFI || a == ARFCI || a == ARFID || a == AHRFID {
					return
				}
				r.As = b
				r.Pcond = p.Link
				r.Link = p.Pcond
				if r.Link.Mark&FOLL == 0 {
					xfol(ctxt, r.Link, last)
				}
				if r.Pcond.Mark&FOLL == 0 {
					fmt.Printf("can't happen 2\n")
				}
				return
			}
		}

		a = ABR
		q = ctxt.NewProg()
		q.As = a
		q.Lineno = p.Lineno
		q.To.Type = obj.TYPE_BRANCH
		q.To.Offset = p.Pc
		q.Pcond = p
//.........这里部分代码省略.........