本文整理汇总了C#中Qyoto.QSize.ExpandedTo方法的典型用法代码示例。如果您正苦于以下问题：C# QSize.ExpandedTo方法的具体用法？C# QSize.ExpandedTo怎么用？C# QSize.ExpandedTo使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类Qyoto.QSize的用法示例。
在下文中一共展示了QSize.ExpandedTo方法的6个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C#代码示例。
示例1: SetupUi
public void SetupUi(QDialog NewContactDialog)
{
if (NewContactDialog.ObjectName == "")
NewContactDialog.ObjectName = "NewContactDialog";
QSize Size = new QSize(360, 150);
Size = Size.ExpandedTo(NewContactDialog.MinimumSizeHint());
NewContactDialog.Size = Size;
NewContactDialog.MinimumSize = new QSize(360, 150);
NewContactDialog.WindowIcon = new QIcon(":/main/resources/monosim_128.png");
gridLayout = new QGridLayout(NewContactDialog);
gridLayout.ObjectName = "gridLayout";
LblTitle = new QLabel(NewContactDialog);
LblTitle.ObjectName = "LblTitle";
LblTitle.Alignment = Qyoto.Qyoto.GetCPPEnumValue("Qt", "AlignCenter");
LblTitle.WordWrap = true;
gridLayout.AddWidget(LblTitle, 0, 0, 1, 2);
LblDesc = new QLabel(NewContactDialog);
LblDesc.ObjectName = "LblDesc";
gridLayout.AddWidget(LblDesc, 2, 0, 1, 1);
TxtDesc = new QLineEdit(NewContactDialog);
TxtDesc.ObjectName = "TxtDesc";
gridLayout.AddWidget(TxtDesc, 2, 1, 1, 1);
LblNumber = new QLabel(NewContactDialog);
LblNumber.ObjectName = "LblNumber";
gridLayout.AddWidget(LblNumber, 3, 0, 1, 1);
TxtNumber = new QLineEdit(NewContactDialog);
TxtNumber.ObjectName = "TxtNumber";
gridLayout.AddWidget(TxtNumber, 3, 1, 1, 1);
spacerItem = new QSpacerItem(282, 37, QSizePolicy.Policy.Minimum, QSizePolicy.Policy.Expanding);
gridLayout.AddItem(spacerItem, 4, 1, 1, 1);
Buttons = new QDialogButtonBox(NewContactDialog);
Buttons.ObjectName = "Buttons";
Buttons.Orientation = Qt.Orientation.Horizontal;
Buttons.StandardButtons = Qyoto.Qyoto.GetCPPEnumValue("QDialogButtonBox", "Cancel") | Qyoto.Qyoto.GetCPPEnumValue("QDialogButtonBox", "Ok");
gridLayout.AddWidget(Buttons, 5, 0, 1, 2);
spacerItem1 = new QSpacerItem(20, 8, QSizePolicy.Policy.Minimum, QSizePolicy.Policy.Fixed);
gridLayout.AddItem(spacerItem1, 1, 0, 1, 1);
RetranslateUi(NewContactDialog);
QObject.Connect(Buttons, Qt.SIGNAL("accepted()"), NewContactDialog, Qt.SLOT("accept()"));
QObject.Connect(Buttons, Qt.SIGNAL("rejected()"), NewContactDialog, Qt.SLOT("reject()"));
QMetaObject.ConnectSlotsByName(NewContactDialog);
} // SetupUi示例2: SetupUi
public void SetupUi(QDialog SelectWriteModeDialog)
{
if (SelectWriteModeDialog.ObjectName == "")
SelectWriteModeDialog.ObjectName = "SelectWriteModeDialog";
QSize Size = new QSize(443, 125);
Size = Size.ExpandedTo(SelectWriteModeDialog.MinimumSizeHint());
SelectWriteModeDialog.Size = Size;
SelectWriteModeDialog.WindowIcon = new QIcon(":/main/resources/monosim_128.png");
gridLayout = new QGridLayout(SelectWriteModeDialog);
gridLayout.ObjectName = "gridLayout";
LblTitle = new QLabel(SelectWriteModeDialog);
LblTitle.ObjectName = "LblTitle";
LblTitle.Alignment = Qyoto.Qyoto.GetCPPEnumValue("Qt", "AlignLeading") | Qyoto.Qyoto.GetCPPEnumValue("Qt", "AlignLeft") | Qyoto.Qyoto.GetCPPEnumValue("Qt", "AlignTop");
gridLayout.AddWidget(LblTitle, 0, 0, 1, 4);
BtnCancel = new QPushButton(SelectWriteModeDialog);
BtnCancel.ObjectName = "BtnCancel";
gridLayout.AddWidget(BtnCancel, 1, 0, 1, 1);
spacerItem = new QSpacerItem(152, 20, QSizePolicy.Policy.Expanding, QSizePolicy.Policy.Minimum);
gridLayout.AddItem(spacerItem, 1, 1, 1, 1);
BtnOverride = new QPushButton(SelectWriteModeDialog);
BtnOverride.ObjectName = "BtnOverride";
BtnOverride.icon = new QIcon(":/toolbar/resources/qt/draw-eraser.png");
gridLayout.AddWidget(BtnOverride, 1, 2, 1, 1);
BtnAppend = new QPushButton(SelectWriteModeDialog);
BtnAppend.ObjectName = "BtnAppend";
BtnAppend.icon = new QIcon(":/toolbar/resources/qt/list-add.png");
gridLayout.AddWidget(BtnAppend, 1, 3, 1, 1);
RetranslateUi(SelectWriteModeDialog);
QMetaObject.ConnectSlotsByName(SelectWriteModeDialog);
} // SetupUi示例3: SetupUi
public void SetupUi(QDialog AboutDialog)
{
if (AboutDialog.ObjectName == "")
AboutDialog.ObjectName = "AboutDialog";
QSize Size = new QSize(660, 460);
Size = Size.ExpandedTo(AboutDialog.MinimumSizeHint());
AboutDialog.Size = Size;
AboutDialog.MinimumSize = new QSize(660, 460);
AboutDialog.WindowIcon = new QIcon(":/main/resources/monosim_128.png");
AboutDialog.Modal = true;
gridLayout = new QGridLayout(AboutDialog);
gridLayout.ObjectName = "gridLayout";
vboxLayout = new QVBoxLayout();
vboxLayout.ObjectName = "vboxLayout";
FrameTop = new QFrame(AboutDialog);
FrameTop.ObjectName = "FrameTop";
FrameTop.MinimumSize = new QSize(0, 64);
FrameTop.AutoFillBackground = false;
FrameTop.FrameShape = QFrame.Shape.StyledPanel;
FrameTop.FrameShadow = QFrame.Shadow.Raised;
gridLayout1 = new QGridLayout(FrameTop);
gridLayout1.ObjectName = "gridLayout1";
Logo = new QWidget(FrameTop);
Logo.ObjectName = "Logo";
Logo.MinimumSize = new QSize(48, 48);
Logo.MaximumSize = new QSize(48, 48);
Logo.StyleSheet = "background-image: url(:/main/resources/monosim_48.png);";
gridLayout1.AddWidget(Logo, 0, 0, 1, 1);
vboxLayout1 = new QVBoxLayout();
vboxLayout1.ObjectName = "vboxLayout1";
LblName = new QLabel(FrameTop);
LblName.ObjectName = "LblName";
QFont font = new QFont();
font.SetBold(true);
font.SetWeight(75);
LblName.Font = font;
LblName.Margin = 1;
vboxLayout1.AddWidget(LblName);
LblDesc = new QLabel(FrameTop);
LblDesc.ObjectName = "LblDesc";
LblDesc.Margin = 1;
vboxLayout1.AddWidget(LblDesc);
gridLayout1.AddLayout(vboxLayout1, 0, 1, 1, 1);
vboxLayout.AddWidget(FrameTop);
tabInfo = new QTabWidget(AboutDialog);
tabInfo.ObjectName = "tabInfo";
tabInfo.AutoFillBackground = false;
Informations = new QWidget();
Informations.ObjectName = "Informations";
gridLayout2 = new QGridLayout(Informations);
gridLayout2.ObjectName = "gridLayout2";
TxtInfo = new QTextEdit(Informations);
TxtInfo.ObjectName = "TxtInfo";
TxtInfo.lineWrapMode = QTextEdit.LineWrapMode.NoWrap;
TxtInfo.ReadOnly = true;
gridLayout2.AddWidget(TxtInfo, 0, 0, 1, 1);
tabInfo.AddTab(Informations, QApplication.Translate("AboutDialog", "Informazioni su", null, QApplication.Encoding.UnicodeUTF8));
Components = new QWidget();
Components.ObjectName = "Components";
gridLayout3 = new QGridLayout(Components);
gridLayout3.ObjectName = "gridLayout3";
TxtThanks = new QTextEdit(Components);
TxtThanks.ObjectName = "TxtThanks";
TxtThanks.ReadOnly = true;
gridLayout3.AddWidget(TxtThanks, 0, 0, 1, 1);
tabInfo.AddTab(Components, QApplication.Translate("AboutDialog", "Componenti", null, QApplication.Encoding.UnicodeUTF8));
vboxLayout.AddWidget(tabInfo);
buttonBox = new QDialogButtonBox(AboutDialog);
buttonBox.ObjectName = "buttonBox";
buttonBox.StandardButtons = Qyoto.Qyoto.GetCPPEnumValue("QDialogButtonBox", "Ok");
vboxLayout.AddWidget(buttonBox);
gridLayout.AddLayout(vboxLayout, 0, 0, 1, 1);
RetranslateUi(AboutDialog);
tabInfo.CurrentIndex = 0;
QMetaObject.ConnectSlotsByName(AboutDialog);
} // SetupUi示例4: SetupUi
public void SetupUi(QDialog SettingsDialog)
{
if (SettingsDialog.ObjectName == "")
SettingsDialog.ObjectName = "SettingsDialog";
QSize Size = new QSize(320, 280);
Size = Size.ExpandedTo(SettingsDialog.MinimumSizeHint());
SettingsDialog.Size = Size;
SettingsDialog.MinimumSize = new QSize(320, 280);
SettingsDialog.WindowIcon = new QIcon(":/main/resources/monosim_128.png");
SettingsDialog.Modal = true;
gridLayout = new QGridLayout(SettingsDialog);
gridLayout.ObjectName = "gridLayout";
FrameSettings = new QGroupBox(SettingsDialog);
FrameSettings.ObjectName = "FrameSettings";
gridLayout1 = new QGridLayout(FrameSettings);
gridLayout1.ObjectName = "gridLayout1";
LblPortSpeedReset = new QLabel(FrameSettings);
LblPortSpeedReset.ObjectName = "LblPortSpeedReset";
QSizePolicy sizePolicy = new QSizePolicy(QSizePolicy.Policy.Fixed, QSizePolicy.Policy.Preferred);
sizePolicy.SetHorizontalStretch(0);
sizePolicy.SetVerticalStretch(0);
sizePolicy.SetHeightForWidth(LblPortSpeedReset.SizePolicy.HasHeightForWidth());
LblPortSpeedReset.SizePolicy = sizePolicy;
gridLayout1.AddWidget(LblPortSpeedReset, 0, 0, 1, 1);
CmbPortSpeedReset = new QComboBox(FrameSettings);
CmbPortSpeedReset.ObjectName = "CmbPortSpeedReset";
gridLayout1.AddWidget(CmbPortSpeedReset, 0, 1, 1, 1);
LblPortSpeed = new QLabel(FrameSettings);
LblPortSpeed.ObjectName = "LblPortSpeed";
sizePolicy.SetHeightForWidth(LblPortSpeed.SizePolicy.HasHeightForWidth());
LblPortSpeed.SizePolicy = sizePolicy;
gridLayout1.AddWidget(LblPortSpeed, 1, 0, 1, 1);
CmbPortSpeed = new QComboBox(FrameSettings);
CmbPortSpeed.ObjectName = "CmbPortSpeed";
gridLayout1.AddWidget(CmbPortSpeed, 1, 1, 1, 1);
LblDataBits = new QLabel(FrameSettings);
LblDataBits.ObjectName = "LblDataBits";
sizePolicy.SetHeightForWidth(LblDataBits.SizePolicy.HasHeightForWidth());
LblDataBits.SizePolicy = sizePolicy;
gridLayout1.AddWidget(LblDataBits, 2, 0, 1, 1);
CmbDataBits = new QComboBox(FrameSettings);
CmbDataBits.ObjectName = "CmbDataBits";
gridLayout1.AddWidget(CmbDataBits, 2, 1, 1, 1);
LblStopBits = new QLabel(FrameSettings);
LblStopBits.ObjectName = "LblStopBits";
sizePolicy.SetHeightForWidth(LblStopBits.SizePolicy.HasHeightForWidth());
LblStopBits.SizePolicy = sizePolicy;
gridLayout1.AddWidget(LblStopBits, 3, 0, 1, 1);
CmbStopBits = new QComboBox(FrameSettings);
CmbStopBits.ObjectName = "CmbStopBits";
gridLayout1.AddWidget(CmbStopBits, 3, 1, 1, 1);
LblParity = new QLabel(FrameSettings);
LblParity.ObjectName = "LblParity";
sizePolicy.SetHeightForWidth(LblParity.SizePolicy.HasHeightForWidth());
LblParity.SizePolicy = sizePolicy;
gridLayout1.AddWidget(LblParity, 4, 0, 1, 1);
CmbParity = new QComboBox(FrameSettings);
CmbParity.ObjectName = "CmbParity";
gridLayout1.AddWidget(CmbParity, 4, 1, 1, 1);
LblConvention = new QLabel(FrameSettings);
LblConvention.ObjectName = "LblConvention";
sizePolicy.SetHeightForWidth(LblConvention.SizePolicy.HasHeightForWidth());
LblConvention.SizePolicy = sizePolicy;
gridLayout1.AddWidget(LblConvention, 5, 0, 1, 1);
CmbConvention = new QComboBox(FrameSettings);
CmbConvention.ObjectName = "CmbConvention";
gridLayout1.AddWidget(CmbConvention, 5, 1, 1, 1);
gridLayout.AddWidget(FrameSettings, 1, 0, 1, 1);
Buttons = new QDialogButtonBox(SettingsDialog);
Buttons.ObjectName = "Buttons";
Buttons.Orientation = Qt.Orientation.Horizontal;
Buttons.StandardButtons = Qyoto.Qyoto.GetCPPEnumValue("QDialogButtonBox", "Cancel") | Qyoto.Qyoto.GetCPPEnumValue("QDialogButtonBox", "Ok");
gridLayout.AddWidget(Buttons, 2, 0, 1, 1);
//.........这里部分代码省略.........
示例5: SetupUi
public void SetupUi(QDialog ChangePinStatusDialog)
{
if (ChangePinStatusDialog.ObjectName == "")
ChangePinStatusDialog.ObjectName = "ChangePinStatusDialog";
QSize Size = new QSize(357, 159);
Size = Size.ExpandedTo(ChangePinStatusDialog.MinimumSizeHint());
ChangePinStatusDialog.Size = Size;
ChangePinStatusDialog.WindowIcon = new QIcon(":/main/resources/monosim_128.png");
gridLayout = new QGridLayout(ChangePinStatusDialog);
gridLayout.ObjectName = "gridLayout";
LblTitle = new QLabel(ChangePinStatusDialog);
LblTitle.ObjectName = "LblTitle";
LblTitle.Alignment = Qyoto.Qyoto.GetCPPEnumValue("Qt", "AlignCenter");
LblTitle.WordWrap = true;
gridLayout.AddWidget(LblTitle, 0, 0, 1, 2);
LblPin1 = new QLabel(ChangePinStatusDialog);
LblPin1.ObjectName = "LblPin1";
gridLayout.AddWidget(LblPin1, 2, 0, 1, 1);
TxtPin1 = new QLineEdit(ChangePinStatusDialog);
TxtPin1.ObjectName = "TxtPin1";
TxtPin1.MaxLength = 4;
TxtPin1.echoMode = QLineEdit.EchoMode.Password;
gridLayout.AddWidget(TxtPin1, 2, 1, 1, 1);
LblPin1check = new QLabel(ChangePinStatusDialog);
LblPin1check.ObjectName = "LblPin1check";
gridLayout.AddWidget(LblPin1check, 3, 0, 1, 1);
TxtPin1check = new QLineEdit(ChangePinStatusDialog);
TxtPin1check.ObjectName = "TxtPin1check";
TxtPin1check.MaxLength = 4;
TxtPin1check.echoMode = QLineEdit.EchoMode.Password;
gridLayout.AddWidget(TxtPin1check, 3, 1, 1, 1);
spacerItem = new QSpacerItem(282, 37, QSizePolicy.Policy.Minimum, QSizePolicy.Policy.Expanding);
gridLayout.AddItem(spacerItem, 4, 1, 1, 1);
Buttons = new QDialogButtonBox(ChangePinStatusDialog);
Buttons.ObjectName = "Buttons";
Buttons.Orientation = Qt.Orientation.Horizontal;
Buttons.StandardButtons = Qyoto.Qyoto.GetCPPEnumValue("QDialogButtonBox", "Cancel") | Qyoto.Qyoto.GetCPPEnumValue("QDialogButtonBox", "Ok");
gridLayout.AddWidget(Buttons, 5, 0, 1, 2);
spacerItem1 = new QSpacerItem(20, 8, QSizePolicy.Policy.Minimum, QSizePolicy.Policy.Fixed);
gridLayout.AddItem(spacerItem1, 1, 0, 1, 1);
RetranslateUi(ChangePinStatusDialog);
QObject.Connect(Buttons, Qt.SIGNAL("accepted()"), ChangePinStatusDialog, Qt.SLOT("accept()"));
QObject.Connect(Buttons, Qt.SIGNAL("rejected()"), ChangePinStatusDialog, Qt.SLOT("reject()"));
QMetaObject.ConnectSlotsByName(ChangePinStatusDialog);
} // SetupUi示例6: SetupUi
public void SetupUi(QMainWindow MainWindow)
{
if (MainWindow.ObjectName == "")
MainWindow.ObjectName = "MainWindow";
QSize Size = new QSize(631, 570);
Size = Size.ExpandedTo(MainWindow.MinimumSizeHint());
MainWindow.Size = Size;
MainWindow.MinimumSize = new QSize(600, 450);
MainWindow.WindowIcon = new QIcon(":/main/resources/monosim_128.png");
MenuFileNew = new QAction(MainWindow);
MenuFileNew.ObjectName = "MenuFileNew";
MenuFileNew.icon = new QIcon(":/toolbar/resources/qt/document-new.png");
MenuFileOpen = new QAction(MainWindow);
MenuFileOpen.ObjectName = "MenuFileOpen";
MenuFileOpen.icon = new QIcon(":/toolbar/resources/qt/document-open.png");
MenuFileSaveFile = new QAction(MainWindow);
MenuFileSaveFile.ObjectName = "MenuFileSaveFile";
MenuFileSaveFile.Enabled = false;
MenuFileSaveFile.icon = new QIcon(":/toolbar/resources/qt/document-save.png");
MenuFileSaveSim = new QAction(MainWindow);
MenuFileSaveSim.ObjectName = "MenuFileSaveSim";
MenuFileSaveSim.Enabled = false;
MenuFileSaveSim.icon = new QIcon(":/main/resources/chip_32.png");
MenuFileClose = new QAction(MainWindow);
MenuFileClose.ObjectName = "MenuFileClose";
MenuFileClose.Enabled = false;
MenuFileClose.icon = new QIcon(":/toolbar/resources/qt/document-close.png");
MenuFileSettings = new QAction(MainWindow);
MenuFileSettings.ObjectName = "MenuFileSettings";
MenuFileSettings.icon = new QIcon(":/toolbar/resources/qt/configure.png");
MenuFileExit = new QAction(MainWindow);
MenuFileExit.ObjectName = "MenuFileExit";
MenuFileExit.icon = new QIcon(":/toolbar/resources/qt/application-exit.png");
MenuSimConnect = new QAction(MainWindow);
MenuSimConnect.ObjectName = "MenuSimConnect";
MenuSimConnect.icon = new QIcon(":/toolbar/resources/qt/network-connect.png");
MenuSimPin = new QAction(MainWindow);
MenuSimPin.ObjectName = "MenuSimPin";
MenuSimPin.Enabled = false;
MenuSimPin.icon = new QIcon(":/toolbar/resources/qt/document-encrypt.png");
MenuSimSaveFile = new QAction(MainWindow);
MenuSimSaveFile.ObjectName = "MenuSimSaveFile";
MenuSimSaveFile.Enabled = false;
MenuSimSaveFile.icon = new QIcon(":/toolbar/resources/qt/document-save.png");
MenuSimSaveSim = new QAction(MainWindow);
MenuSimSaveSim.ObjectName = "MenuSimSaveSim";
MenuSimSaveSim.Enabled = false;
MenuSimSaveSim.icon = new QIcon(":/main/resources/chip_32.png");
MenuSimDeleteAll = new QAction(MainWindow);
MenuSimDeleteAll.ObjectName = "MenuSimDeleteAll";
MenuSimDeleteAll.Enabled = false;
MenuSimDeleteAll.icon = new QIcon(":/toolbar/resources/qt/edit-delete.png");
MenuSimDisconnect = new QAction(MainWindow);
MenuSimDisconnect.ObjectName = "MenuSimDisconnect";
MenuSimDisconnect.Enabled = false;
MenuSimDisconnect.icon = new QIcon(":/toolbar/resources/qt/network-disconnect.png");
MenuAboutInfo = new QAction(MainWindow);
MenuAboutInfo.ObjectName = "MenuAboutInfo";
MenuAboutInfo.icon = new QIcon(":/toolbar/resources/qt/dialog-information.png");
centralwidget = new QWidget(MainWindow);
centralwidget.ObjectName = "centralwidget";
gridLayout = new QGridLayout(centralwidget);
gridLayout.ObjectName = "gridLayout";
splitter = new QSplitter(centralwidget);
splitter.ObjectName = "splitter";
splitter.Orientation = Qt.Orientation.Vertical;
splitter.ChildrenCollapsible = false;
FrameFile = new QGroupBox(splitter);
FrameFile.ObjectName = "FrameFile";
FrameFile.MinimumSize = new QSize(0, 100);
gridLayout1 = new QGridLayout(FrameFile);
gridLayout1.ObjectName = "gridLayout1";
LstFileContacts = new QTreeWidget(FrameFile);
LstFileContacts.ObjectName = "LstFileContacts";
LstFileContacts.Enabled = false;
LstFileContacts.EditTriggers = Qyoto.Qyoto.GetCPPEnumValue("QAbstractItemView", "NoEditTriggers");
LstFileContacts.selectionMode = QAbstractItemView.SelectionMode.ExtendedSelection;
LstFileContacts.ItemsExpandable = false;
LstFileContacts.ExpandsOnDoubleClick = false;
gridLayout1.AddWidget(LstFileContacts, 0, 0, 1, 1);
splitter.AddWidget(FrameFile);
FrameSim = new QGroupBox(splitter);
FrameSim.ObjectName = "FrameSim";
FrameSim.MinimumSize = new QSize(0, 100);
gridLayout2 = new QGridLayout(FrameSim);
gridLayout2.ObjectName = "gridLayout2";
LstSimContacts = new QTreeWidget(FrameSim);
LstSimContacts.ObjectName = "LstSimContacts";
LstSimContacts.Enabled = false;
LstSimContacts.EditTriggers = Qyoto.Qyoto.GetCPPEnumValue("QAbstractItemView", "NoEditTriggers");
LstSimContacts.selectionMode = QAbstractItemView.SelectionMode.ExtendedSelection;
LstSimContacts.ItemsExpandable = false;
LstSimContacts.ExpandsOnDoubleClick = false;
gridLayout2.AddWidget(LstSimContacts, 0, 0, 1, 1);
splitter.AddWidget(FrameSim);
//.........这里部分代码省略.........