本文整理汇总了C#中PAS.AutoTest.PasATCore.XMLParameter.GetParameterValueByName方法的典型用法代码示例。如果您正苦于以下问题：C# XMLParameter.GetParameterValueByName方法的具体用法？C# XMLParameter.GetParameterValueByName怎么用？C# XMLParameter.GetParameterValueByName使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类PAS.AutoTest.PasATCore.XMLParameter的用法示例。
在下文中一共展示了XMLParameter.GetParameterValueByName方法的4个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C#代码示例。
示例1: Run_PS_ImportDicom_RadioLog_Case1094
//Case 1094: 1.3.7_WorkFlow_ImportDICOMImage+GetPresentationStateInfo_RadioLogInformation
public void Run_PS_ImportDicom_RadioLog_Case1094()
{
//int runCount = this.Input.Repetition;
int runCount = 0; // this is the initial run count. Use this count to repeat different test data set.
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "Test round");
//Mark the check point here to indicate what's the check point here
CheckPoint p1 = new CheckPoint("createPatient", "Setup environment of createPatient");
CheckPoint p2 = new CheckPoint("importObject", "Setup environment of importObject");
CheckPoint p3 = new CheckPoint("getImageInfo", "Test getImageInfo");
CheckPoint p4 = new CheckPoint("getPresentationStateInfo", "Test getPresentationStateInfo");
r.CheckPoints.Add(p1);
r.CheckPoints.Add(p2);
r.CheckPoints.Add(p3);
r.CheckPoints.Add(p4);
//create required PAS service instaces here
PatientService pats = new PatientService();
ImportService ims = new ImportService();
ImageService img = new ImageService();
PresentationStateService ps = new PresentationStateService();
//create input parameters here, it may include XML path type and string type value
XMLParameter pa1 = new XMLParameter("patient");
XMLParameter pa2 = new XMLParameter("importObject");
XMLParameter pa3 = new XMLParameter("image");
XMLParameter ps4 = new XMLParameter("presentationstate");
XMLParameterCollection pa4 = new XMLParameterCollection();
try
{
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "createPatient":
pa1.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "importObject":
pa2.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
default:
Console.WriteLine("There is no valid selection when parse input parameters.");
break;
}
}
//If we need change parameter by specific logic, please put code here
//Get service result
//Step1 result
XMLResult step1_result = pats.createPatient(pa1);
//Log step1 service output
if (step1_result.IsErrorOccured)
{
p1.Result = TestResult.Fail;
p1.Outputs.AddParameter("Step 1: createPatient", "Error", step1_result.ResultContent);
SaveRound(r);
continue;
}
p1.Result = TestResult.Pass;
p1.Outputs.AddParameter("Step 1: createPatient", "Success", step1_result.ResultContent);
//Change input parameter according the output of Step1
pa2.AddParameter("patientInternalId", step1_result.SingleResult);
//Step2 result
//if objectFileFullPath is empty string, skip step2
if (pa2.GetParameterValueByName("objectFileFullPath") != null && pa2.GetParameterValueByName("objectFileFullPath") != "")
{
XMLResult step2_result = ims.importObject(pa2.GetParameterValueByName("patientInternalId"), "", pa2.GetParameterValueByName("objectFileFullPath"), "", false, "");
//Log step2 service output
if (step2_result.IsErrorOccured)
{
p2.Result = TestResult.Fail;
p2.Outputs.AddParameter("Step 2: importObject", "Error", step2_result.ResultContent);
SaveRound(r);
continue;
}
p2.Result = TestResult.Pass;
p2.Outputs.AddParameter("Step 2: importObject", "Success", step2_result.ResultContent);
//Change input parameter according the output of Step2
// if step2 is skipped, step3 input has no need parameter of internal_id
for (int i = 0; i < step2_result.MultiResults.Count; i++)
{
//.........这里部分代码省略.........
示例2: Run_RadioLogicalLog_WorkFlow_N02_CreateDeleteGet_Case926
//Case 926: 1.3.3_WorkFlow_N02_CreateDeleteGet
public void Run_RadioLogicalLog_WorkFlow_N02_CreateDeleteGet_Case926()
{
//int runCount = this.Input.Repetition;
int runCount = 0; // this is the initial run count. Use this count to repeat different test data set.
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "Test round");
//Mark the check point here to indicate what's the check point here
CheckPoint p1 = new CheckPoint("createPatient", "Setup environment of createPatient");
CheckPoint p2 = new CheckPoint("createRadioLogEntry", "Setup environment of createRadioLogEntry");
CheckPoint p3 = new CheckPoint("deleteRadioLogEntry", "Test deleteRadioLogEntry");
CheckPoint p4 = new CheckPoint("getRadioLogEntry", "Test getRadioLogEntry");
r.CheckPoints.Add(p1);
r.CheckPoints.Add(p2);
r.CheckPoints.Add(p3);
r.CheckPoints.Add(p4);
//create required PAS service instaces here
PatientService pats = new PatientService();
RadiologService radios = new RadiologService();
//create input parameters here, it may include XML path type and string type value
XMLParameter pa1 = new XMLParameter("createPatient");
XMLParameter pa2 = new XMLParameter("createRadioLogEntry");
XMLParameter pa3 = new XMLParameter("deleteRadioLogEntry");
XMLParameter pa4 = new XMLParameter("getRadioLogEntry");
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "createPatient":
pa1.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "createRadioLogEntry":
pa2.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "deleteRadioLogEntry":
pa3.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "getRadioLogEntry":
pa4.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
default:
Console.WriteLine("There is no valid selection when parse input parameters.");
break;
}
}
//If we need change parameter by specific logic, please put code here
//Get service result
//Step1 result
XMLResult step1_result = pats.createPatient(pa1);
//Log step1 service output
if (step1_result.IsErrorOccured)
{
p1.Result = TestResult.Fail;
p1.Outputs.AddParameter("createPatient", "Error", step1_result.ResultContent);
SaveRound(r);
continue;
}
p1.Result = TestResult.Pass;
p1.Outputs.AddParameter("createPatient", "Success", step1_result.ResultContent);
//Change input parameter according the output of Step1
pa2.AddParameter("patient_internal_id", step1_result.SingleResult);
//Step2 result
XMLResult step2_result = radios.createRadioLogEntry(pa2);
//Log step2 service output
if (step2_result.IsErrorOccured)
{
p2.Result = TestResult.Fail;
p2.Outputs.AddParameter("createRadioLogEntry", "Error", step2_result.ResultContent);
SaveRound(r);
continue;
}
p2.Result = TestResult.Pass;
p2.Outputs.AddParameter("createRadioLogEntry", "Success", step2_result.ResultContent);
//Change input parameter according the output of Step2
pa3.AddParameter("radioLogEntryInternalId", step2_result.SingleResult);
pa4.AddParameter("radioLogEntryInternalId", step2_result.SingleResult);
//Step3 result
XMLResult step3_result = radios.deleteRadioLogEntry(pa3.GetParameterValueByName("radioLogEntryInternalId"));
//.........这里部分代码省略.........
示例3: Run_PS_Acq_Radiolog_Case1091
//Case 1091: 1.3.7_WorkFlow_AcquireRVG+SetImageInfo+GetPresentationStateInfo_RadioLogInformation
public void Run_PS_Acq_Radiolog_Case1091()
{
//int runCount = this.Input.Repetition;
int runCount = 0; // this is the initial run count. Use this count to repeat different test data set.
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "Test round");
//Mark the check point here to indicate what's the check point here
CheckPoint p1 = new CheckPoint("createPatient", "Setup environment of createPatient");
CheckPoint p2 = new CheckPoint("startAcquisition", "Setup environment of acquisition");
CheckPoint p3 = new CheckPoint("getAcquisitionResult", "Setup environment of image and PS id");
CheckPoint p4 = new CheckPoint("setImageInfo", "Setup environment of setImageInfo");
CheckPoint p5 = new CheckPoint("getImageInfo", "Test getImageInfo");
CheckPoint p6 = new CheckPoint("getPresentationStateInfo", "Test getPresentationStateInfo");
r.CheckPoints.Add(p1);
r.CheckPoints.Add(p2);
r.CheckPoints.Add(p3);
r.CheckPoints.Add(p4);
r.CheckPoints.Add(p5);
r.CheckPoints.Add(p6);
//create required PAS service instaces here
PatientService pats = new PatientService();
AcquisitionService acq = new AcquisitionService();
ImageService img = new ImageService();
PresentationStateService ps = new PresentationStateService();
//create input parameters here, it may include XML path type and string type value
XMLParameter pa1 = new XMLParameter("patient");
XMLParameter pa2 = new XMLParameter("acq_info");
XMLParameter pa3 = new XMLParameter("getAcquisitionResult");
XMLParameter pa4 = new XMLParameter("image");
XMLParameter pa5 = new XMLParameter("image");
XMLParameter pt6 = new XMLParameter("presentationstate");
XMLParameterCollection pa6 = new XMLParameterCollection();
try
{
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "createPatient":
pa1.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "acquire":
pa2.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "setImageInfo":
pa4.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
default:
Console.WriteLine("There is no valid selection when parse input parameters.");
break;
}
}
//If we need change parameter by specific logic, please put code here
//Get service result
//Step1 result
XMLResult step1_result = pats.createPatient(pa1);
//Log step1 service output
if (step1_result.IsErrorOccured)
{
p1.Result = TestResult.Fail;
p1.Outputs.AddParameter("createPatient", "Error", step1_result.ResultContent);
SaveRound(r);
continue;
}
p1.Result = TestResult.Pass;
p1.Outputs.AddParameter("createPatient", "Success", step1_result.ResultContent);
//Change input parameter according the output of Step1
pa2.AddParameter("patient_internal_id", step1_result.SingleResult);
//Step2 result
//if acquireType isn't emtpy string, skip step2, here is only RVG acquisition
bool acqflag = true;
XMLResult step3_result = new XMLResult();
if (pa2.GetParameterValueByName("acquireType") == null || pa2.GetParameterValueByName("acquireType") == "")
{
XMLResult rslAcqRVG = acq.startAcquisition(pa2);
System.Threading.Thread.Sleep(3000);
if (rslAcqRVG.IsErrorOccured)
{
System.Diagnostics.Debug.Print("Acquire fail:");
p2.Result = TestResult.Fail;
p2.Outputs.AddParameter("acquire", "Acquire image error", rslAcqRVG.Message);
//.........这里部分代码省略.........
示例4: Run_RadioLogicalLog_WorkFlow_N01_CreateGet_Case925
//Case 925: 1.3.3_WorkFlow_N01_CreateGet
public void Run_RadioLogicalLog_WorkFlow_N01_CreateGet_Case925()
{
//int runCount = this.Input.Repetition;
int runCount = 0; // this is the initial run count. Use this count to repeat different test data set.
foreach (InputDataSet ids in this.Input.DataSets)
{
runCount++;
Round r = this.NewRound(runCount.ToString(), "Test round");
//Mark the check point here to indicate what's the check point here
CheckPoint p1 = new CheckPoint("createPatient", "Setup environment of createPatient");
CheckPoint p2 = new CheckPoint("importObject", "Setup environment of importObject");
CheckPoint p3 = new CheckPoint("createRadioLogEntry", "Test createRadioLogEntry");
CheckPoint p4 = new CheckPoint("getRadioLogEntry", "Test getRadioLogEntry");
r.CheckPoints.Add(p1);
r.CheckPoints.Add(p2);
r.CheckPoints.Add(p3);
r.CheckPoints.Add(p4);
//create required PAS service instaces here
PatientService pats = new PatientService();
ImportService ims = new ImportService();
RadiologService radios = new RadiologService();
//create input parameters here, it may include XML path type and string type value
XMLParameter pa1 = new XMLParameter("createPatient");
XMLParameter pa2 = new XMLParameter("importObject");
XMLParameter pa3 = new XMLParameter("createRadioLogEntry");
XMLParameter pa4 = new XMLParameter("getRadioLogEntry");
for (int i = 0; i < ids.InputParameters.Count; i++)
{
switch (ids.InputParameters.GetParameter(i).Step)
{
case "createPatient":
pa1.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "importObject":
pa2.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "createRadioLogEntry":
pa3.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
case "getRadioLogEntry":
pa4.AddParameter(ids.InputParameters.GetParameter(i).Key, ids.InputParameters.GetParameter(i).Value);
break;
default:
Console.WriteLine("There is no valid selection when parse input parameters.");
break;
}
}
//If we need change parameter by specific logic, please put code here
//Get service result
//Step1 result
XMLResult step1_result = pats.createPatient(pa1);
//Log step1 service output
if (step1_result.IsErrorOccured)
{
p1.Result = TestResult.Fail;
p1.Outputs.AddParameter("createPatient", "Error", step1_result.ResultContent);
SaveRound(r);
continue;
}
p1.Result = TestResult.Pass;
p1.Outputs.AddParameter("createPatient", "Success", step1_result.ResultContent);
//Change input parameter according the output of Step1
pa2.AddParameter("patientInternalId", step1_result.SingleResult);
pa3.AddParameter("patient_internal_id", step1_result.SingleResult);
//Step2 result
//if objectFileFullPath is empty string, skip step2
if (pa2.GetParameterValueByName("objectFileFullPath") != null && pa2.GetParameterValueByName("objectFileFullPath") != "")
{
XMLResult step2_result = ims.importObject(pa2.GetParameterValueByName("patientInternalId"), "", pa2.GetParameterValueByName("objectFileFullPath"), "", false, "");
//Log step2 service output
if (step2_result.IsErrorOccured)
{
p2.Result = TestResult.Fail;
p2.Outputs.AddParameter("importObject", "Error", step2_result.ResultContent);
SaveRound(r);
continue;
}
p2.Result = TestResult.Pass;
p2.Outputs.AddParameter("importObject", "Success", step2_result.ResultContent);
//Change input parameter according the output of Step2
// if step2 is skipped, step3 input has no need parameter of instance_internal_id
//.........这里部分代码省略.........