本文整理汇总了C#中Mono.Unix.StdioFileStream类的典型用法代码示例。如果您正苦于以下问题:C# StdioFileStream类的具体用法?C# StdioFileStream怎么用?C# StdioFileStream使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
StdioFileStream类属于Mono.Unix命名空间,在下文中一共展示了StdioFileStream类的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C#代码示例。
示例1: CtorFileNotFoundException1
public void CtorFileNotFoundException1 ()
{
string path = TempFolder + DSC + "thisfileshouldnotexists.test";
DeleteFile (path);
StdioFileStream stream = null;
try {
stream = new StdioFileStream (path, FileMode.Open);
} finally {
if (stream != null)
stream.Close ();
DeleteFile (path);
}
}
示例2: TestCtr
public void TestCtr ()
{
string path = TempFolder + DSC + "testfilestream.tmp.1";
DeleteFile (path);
StdioFileStream stream = null;
try {
stream = new StdioFileStream (path, FileMode.Create);
} finally {
if (stream != null)
stream.Close ();
DeleteFile (path);
}
}
示例3: TestReadByteVerifyAccessMode
public void TestReadByteVerifyAccessMode ()
{
string path = TempFolder + Path.DirectorySeparatorChar + "temp";
DeleteFile (path);
StdioFileStream stream = null;
try {
stream = new StdioFileStream (path, FileMode.OpenOrCreate, FileAccess.Write);
int readByte = stream.ReadByte ();
} finally {
if (stream != null)
stream.Close();
DeleteFile (path);
}
}
示例4: ReadBytePastEndOfStream
public void ReadBytePastEndOfStream ()
{
string path = TempFolder + Path.DirectorySeparatorChar + "temp";
DeleteFile (path);
using (StdioFileStream stream = new StdioFileStream (path, FileMode.OpenOrCreate, FileAccess.Read)) {
stream.Seek (0, SeekOrigin.End);
Assert.AreEqual (-1, stream.ReadByte (), "ReadByte");
stream.Close ();
}
}
示例5: CtorArgumentException3
public void CtorArgumentException3 ()
{
string path = TempFolder + Path.DirectorySeparatorChar + "temp";
StdioFileStream stream = null;
DeleteFile (path);
try {
stream = new StdioFileStream (".test.test.test.2", FileMode.Truncate, FileAccess.Read);
} finally {
if (stream != null)
stream.Close ();
DeleteFile (path);
}
}
示例6: Seek_InvalidSeekOrigin
public void Seek_InvalidSeekOrigin ()
{
string path = TempFolder + Path.DirectorySeparatorChar + "temp";
DeleteFile (path);
using (StdioFileStream stream = new StdioFileStream (path, FileMode.OpenOrCreate, FileAccess.Read)) {
stream.Seek (0, (SeekOrigin) (-1));
}
}
示例7: Seek_Disposed
public void Seek_Disposed ()
{
string path = TempFolder + Path.DirectorySeparatorChar + "temp";
DeleteFile (path);
StdioFileStream stream = new StdioFileStream (path, FileMode.OpenOrCreate, FileAccess.Write);
stream.Close ();
stream.Seek (0, SeekOrigin.Begin);
}
示例8: Read_CountNegative
public void Read_CountNegative ()
{
string path = TempFolder + Path.DirectorySeparatorChar + "temp";
DeleteFile (path);
using (StdioFileStream stream = new StdioFileStream (path, FileMode.OpenOrCreate, FileAccess.Read)) {
stream.Read (new byte[0], 1, -1);
}
}
示例9: CtorArgumentException1
public void CtorArgumentException1 ()
{
StdioFileStream stream;
stream = new StdioFileStream ("", FileMode.Create);
stream.Close ();
}
示例10: TestDefaultProperties
public void TestDefaultProperties ()
{
#if XXX
string path = TempFolder + Path.DirectorySeparatorChar + "testStdioFileStream.tmp.2";
DeleteFile (path);
StdioFileStream stream = new StdioFileStream (path, FileMode.Create);
Assert.AreEqual (true, stream.CanRead, "test#01");
Assert.AreEqual (true, stream.CanSeek, "test#02");
Assert.AreEqual (true, stream.CanWrite, "test#03");
Assert.AreEqual (0, stream.Position, "test#06");
Assert.AreEqual ("Mono.Unix.StdioFileStream", stream.ToString(), "test#07");
stream.Close ();
DeleteFile (path);
stream = new StdioFileStream (path, FileMode.OpenOrCreate, FileAccess.Read);
Assert.AreEqual (true, stream.CanRead, "test#08");
Assert.AreEqual (true, stream.CanSeek, "test#09");
Assert.AreEqual (false, stream.CanWrite, "test#10");
Assert.AreEqual (0, stream.Position, "test#13");
Assert.AreEqual ("Mono.Unix.StdioFileStream", stream.ToString(), "test#14");
stream.Close ();
stream = new StdioFileStream (path, FileMode.Truncate, FileAccess.Write);
Assert.AreEqual (false, stream.CanRead, "test#15");
Assert.AreEqual (true, stream.CanSeek, "test#16");
Assert.AreEqual (true, stream.CanWrite, "test#17");
Assert.AreEqual (0, stream.Position, "test#20");
Assert.AreEqual ("Mono.Unix.StdioFileStream", stream.ToString(), "test#21");
stream.Close ();
DeleteFile (path);
#endif
}
示例11: PositionAfterWrite
public void PositionAfterWrite ()
{
#if XXX
string path = TempFolder + DSC + "FST.Position.Test";
DeleteFile (path);
StdioFileStream stream = new StdioFileStream (path, FileMode.CreateNew,
FileAccess.ReadWrite);
FilePosition fp;
Assert.AreEqual (0, stream.Position, "test #01");
Assert.AreEqual ("(Mono.Unix.FilePosition 00000000",
(fp = stream.FilePosition).ToString().Substring (0, 32), "test#02");
fp.Dispose ();
byte[] message = new byte[]{
(byte) 'H', (byte) 'e', (byte) 'l', (byte) 'l', (byte) 'o', (byte) ' ',
(byte) 'W', (byte) 'o', (byte) 'r', (byte) 'l', (byte) 'd',
};
stream.Write (message, 0, message.Length);
Assert.AreEqual (11, stream.Position, "test #03");
Assert.AreEqual (message.Length, stream.Position, "test #04");
Assert.AreEqual ("(Mono.Unix.FilePosition 0B000000",
(fp = stream.FilePosition).ToString().Substring (0, 32), "test#04");
fp.Dispose ();
#endif
}
示例12: Length
public void Length ()
{
// Test that the Length property takes into account the data
// in the buffer
string path = TempFolder + DSC + "StdioFileStreamTest.Length";
DeleteFile (path);
StdioFileStream stream = new StdioFileStream (path, FileMode.CreateNew);
byte[] outbytes = new byte [] {1, 2, 3, 4};
stream.Write (outbytes, 0, 4);
Assert.AreEqual (stream.Length, 4);
stream.Close ();
}
示例13: Flush
public void Flush ()
{
#if XXX
// This test depends too much on the internal implementation of stdio's FILE
string path = TempFolder + DSC + "StdioFileStreamTest.Flush";
StdioFileStream stream = null;
StdioFileStream stream2 = null;
DeleteFile (path);
try {
stream = new StdioFileStream (path, FileMode.CreateNew, FileAccess.ReadWrite);
stream2 = new StdioFileStream (path, FileMode.Open, FileAccess.ReadWrite);
stream.Write (new byte [] {1, 2, 3, 4, 5}, 0, 5);
byte [] bytes = new byte [5];
stream2.Read (bytes, 0, 5);
Assert.AreEqual (0, bytes [0], "test#01");
Assert.AreEqual (0, bytes [1], "test#02");
Assert.AreEqual (0, bytes [2], "test#03");
Assert.AreEqual (0, bytes [3], "test#04");
stream.Flush ();
stream2.Read (bytes, 0, 5);
Assert.AreEqual (1, bytes [0], "test#05");
Assert.AreEqual (2, bytes [1], "test#06");
Assert.AreEqual (3, bytes [2], "test#07");
Assert.AreEqual (4, bytes [3], "test#08");
} finally {
if (stream != null)
stream.Close ();
if (stream2 != null)
stream2.Close ();
Console.WriteLine ("P: " + path);
//DeleteFile (path);
}
#endif
}
示例14: Write
public void Write ()
{
string path = TempFolder + DSC + "StdioFileStreamTest.Write";
DeleteFile (path);
StdioFileStream stream = new StdioFileStream (path, FileMode.CreateNew, FileAccess.ReadWrite);
byte[] outbytes = new byte [] {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16};
byte[] bytes = new byte [15];
// Check that the data is flushed when we overflow the buffer
// with a large amount of data
stream.Write (outbytes, 0, 5);
stream.Write (outbytes, 5, 10);
stream.Seek (0, SeekOrigin.Begin);
stream.Read (bytes, 0, 15);
for (int i = 0; i < 15; ++i)
Assert.AreEqual (i + 1, bytes [i]);
// Check that the data is flushed when we overflow the buffer
// with a small amount of data
stream.Write (outbytes, 0, 7);
stream.Write (outbytes, 7, 7);
stream.Write (outbytes, 14, 1);
stream.Seek (15, SeekOrigin.Begin);
Array.Clear (bytes, 0, bytes.Length);
stream.Read (bytes, 0, 15);
for (int i = 0; i < 15; ++i)
Assert.AreEqual (i + 1, bytes [i]);
stream.Close ();
}
示例15: CtorAccess1Read2Read
public void CtorAccess1Read2Read ()
{
StdioFileStream fs = null;
StdioFileStream fs2 = null;
string tempPath = Path.Combine (TempFolder, "temp");
try {
if (!File.Exists (tempPath)) {
TextWriter tw = File.CreateText (tempPath);
tw.Write ("FOO");
tw.Close ();
}
fs = new StdioFileStream (tempPath, FileMode.Open, FileAccess.Read);
fs2 = new StdioFileStream (tempPath, FileMode.Open, FileAccess.Read);
} finally {
if (fs != null)
fs.Close ();
if (fs2 != null)
fs2.Close ();
}
}