当前位置: 首页>>代码示例>>C#>>正文


C# ArduinoSTK.connectAP方法代码示例

本文整理汇总了C#中MissionPlanner.Arduino.ArduinoSTK.connectAP方法的典型用法代码示例。如果您正苦于以下问题:C# ArduinoSTK.connectAP方法的具体用法?C# ArduinoSTK.connectAP怎么用?C# ArduinoSTK.connectAP使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在MissionPlanner.Arduino.ArduinoSTK的用法示例。


在下文中一共展示了ArduinoSTK.connectAP方法的2个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C#代码示例。

示例1: BUT_copyto1280_Click

        private void BUT_copyto1280_Click(object sender, EventArgs e)
        {
            IArduinoComms port = new ArduinoSTK();

            port.BaudRate = 57600;

            port.DataBits = 8;
            port.StopBits = StopBits.One;
            port.Parity = Parity.None;
            port.DtrEnable = true;

            StreamReader sr = new StreamReader(Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + @"EEPROM1280.bin");
            BinaryReader br = new BinaryReader(sr.BaseStream);
            byte[] EEPROM = br.ReadBytes(1024 * 4);
            br.Close();
            sr.Close();

            sr = new StreamReader(Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + @"FLASH1280.bin");
            br = new BinaryReader(sr.BaseStream);
            byte[] FLASH = br.ReadBytes(1024 * 128);
            br.Close();
            sr.Close();

            try
            {
                port.PortName = MissionPlanner.MainV2.comPortName;

                port.Open();

                if (port.connectAP())
                {
                    log.Info("starting");

                    port.uploadflash(FLASH, 0, FLASH.Length, 0);

                    port.upload(EEPROM, 0, (short)EEPROM.Length, 0);

                    log.Info("Uploaded");

                }
                else
                {

                    CustomMessageBox.Show("Communication Error - no connection");
                }
                port.Close();

            }
            catch (Exception ex) { CustomMessageBox.Show("Check port settings or Port in use? " + ex.ToString()); port.Close(); }
        }
开发者ID:RealTadango,项目名称:MissionPlanner,代码行数:50,代码来源:temp.cs

示例2: BUT_copy1280_Click

        private void BUT_copy1280_Click(object sender, EventArgs e)
        {
            ArduinoSTK port = new ArduinoSTK();
            port.BaudRate = 57600;
            port.DataBits = 8;
            port.StopBits = StopBits.One;
            port.Parity = Parity.None;
            port.DtrEnable = true;

            try
            {
                port.PortName = MissionPlanner.MainV2.comPortName;

                log.Info("Open Port");
                port.Open();
                log.Info("Connect AP");
                if (port.connectAP())
                {
                    log.Info("Download AP");
                    byte[] EEPROM = new byte[1024 * 4];

                    for (int a = 0; a < 4 * 1024; a += 0x100)
                    {
                        port.setaddress(a);
                        port.download(0x100).CopyTo(EEPROM, a);
                    }
                    log.Info("Verify State");
                    if (port.keepalive())
                    {
                        StreamWriter sw = new StreamWriter(Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + @"EEPROM1280.bin");
                        BinaryWriter bw = new BinaryWriter(sw.BaseStream);
                        bw.Write(EEPROM, 0, EEPROM.Length);
                        bw.Close();

                        log.Info("Download AP");
                        byte[] FLASH = new byte[1024 * 128];

                        for (int a = 0; a < FLASH.Length; a += 0x100)
                        {
                            port.setaddress(a);
                            port.downloadflash(0x100).CopyTo(FLASH, a);
                        }

                        sw = new StreamWriter(Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + @"FLASH1280.bin");
                        bw = new BinaryWriter(sw.BaseStream);
                        bw.Write(FLASH, 0, FLASH.Length);
                        bw.Close();

                    }
                    else
                    {
                        CustomMessageBox.Show("Communication Error - Bad data");
                    }
                }
                else
                {
                    CustomMessageBox.Show("Communication Error - no connection");
                }
                port.Close();
            }
            catch (Exception ex) { CustomMessageBox.Show("Port Error? " + ex.ToString()); if (port != null && port.IsOpen) { port.Close(); } }
        }
开发者ID:RealTadango,项目名称:MissionPlanner,代码行数:62,代码来源:temp.cs


注:本文中的MissionPlanner.Arduino.ArduinoSTK.connectAP方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。