当前位置: 首页>>代码示例>>C#>>正文


C# BlobBuilder.WriteInt32方法代码示例

本文整理汇总了C#中Microsoft.Cci.BlobBuilder.WriteInt32方法的典型用法代码示例。如果您正苦于以下问题:C# BlobBuilder.WriteInt32方法的具体用法?C# BlobBuilder.WriteInt32怎么用?C# BlobBuilder.WriteInt32使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在Microsoft.Cci.BlobBuilder的用法示例。


在下文中一共展示了BlobBuilder.WriteInt32方法的7个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C#代码示例。

示例1: WriteData

        public void WriteData(BlobBuilder resourceWriter)
        {
            if (_fileReference == null)
            {
                try
                {
                    using (Stream stream = _streamProvider())
                    {
                        if (stream == null)
                        {
                            throw new InvalidOperationException(CodeAnalysisResources.ResourceStreamProviderShouldReturnNonNullStream);
                        }

                        var count = (int)(stream.Length - stream.Position);
                        resourceWriter.WriteInt32(count);

                        resourceWriter.Write(stream, count);
                        resourceWriter.Align(8);
                    }
                }
                catch (Exception e)
                {
                    throw new ResourceException(_name, e);
                }
            }
        }
开发者ID:rjmurillo,项目名称:roslyn,代码行数:26,代码来源:ManagedResource.cs

示例2: WriteData

        public void WriteData(BlobBuilder resourceWriter)
        {
            if (_fileReference == null)
            {
                try
                {
                    using (Stream stream = _streamProvider())
                    {
                        if (stream == null)
                        {
                            throw new InvalidOperationException(CodeAnalysisResources.ResourceStreamProviderShouldReturnNonNullStream);
                        }

                        var count = (int)(stream.Length - stream.Position);
                        resourceWriter.WriteInt32(count);

                        int bytesWritten = resourceWriter.TryWriteBytes(stream, count);
                        if (bytesWritten != count)
                        {
                            throw new EndOfStreamException(
                                    string.Format(CultureInfo.CurrentUICulture, CodeAnalysisResources.ResourceStreamEndedUnexpectedly, bytesWritten, count));
                        }
                        resourceWriter.Align(8);
                    }
                }
                catch (Exception e)
                {
                    throw new ResourceException(_name, e);
                }
            }
        }
开发者ID:SoumikMukherjeeDOTNET,项目名称:roslyn,代码行数:31,代码来源:ManagedResource.cs

示例3: CountClear

        public void CountClear()
        {
            var builder = new BlobBuilder();
            Assert.Equal(0, builder.Count);

            builder.WriteByte(1);
            Assert.Equal(1, builder.Count);

            builder.WriteInt32(4);
            Assert.Equal(5, builder.Count);

            builder.Clear();
            Assert.Equal(0, builder.Count);

            builder.WriteInt64(1);
            Assert.Equal(8, builder.Count);

            AssertEx.Equal(new byte[] { 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, builder.ToArray());
        }
开发者ID:rgani,项目名称:roslyn,代码行数:19,代码来源:BlobTests.cs

示例4: WritePrimitive

        public void WritePrimitive()
        {
            var writer = new BlobBuilder(4);

            writer.WriteUInt32(0x11223344);
            writer.WriteUInt16(0x5566);
            writer.WriteByte(0x77);
            writer.WriteUInt64(0x8899aabbccddeeff);
            writer.WriteInt32(-1);
            writer.WriteInt16(-2);
            writer.WriteSByte(-3);
            writer.WriteBoolean(true);
            writer.WriteBoolean(false);
            writer.WriteInt64(unchecked((long)0xfedcba0987654321));
            writer.WriteDateTime(new DateTime(0x1112223334445556));
            writer.WriteDecimal(102030405060.70m);
            writer.WriteDouble(double.NaN);
            writer.WriteSingle(float.NegativeInfinity);

            AssertEx.Equal(new byte[] 
            {
                0x44, 0x33, 0x22, 0x11,
                0x66, 0x55,
                0x77,
                0xff, 0xee, 0xdd, 0xcc, 0xbb, 0xaa, 0x99, 0x88,
                0xff, 0xff, 0xff, 0xff, 
                0xfe, 0xff,
                0xfd,
                0x01,
                0x00,
                0x21, 0x43, 0x65, 0x87, 0x09, 0xBA, 0xDC, 0xFE,
                0x56, 0x55, 0x44, 0x34, 0x33, 0x22, 0x12, 0x11,
                0x02, 0xD6, 0xE0, 0x9A, 0x94, 0x47, 0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
                0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF,
                0x00, 0x00, 0x80, 0xFF
            }, writer.ToArray());
        }
开发者ID:rjmurillo,项目名称:roslyn,代码行数:37,代码来源:BlobWriterTests.cs

示例5: WriteDirectory

        private void WriteDirectory(Directory directory, BlobBuilder writer, uint offset, uint level, uint sizeOfDirectoryTree, int virtualAddressBase, BlobBuilder dataWriter)
        {
            writer.WriteUInt32(0); // Characteristics
            writer.WriteUInt32(0); // Timestamp
            writer.WriteUInt32(0); // Version
            writer.WriteUInt16(directory.NumberOfNamedEntries);
            writer.WriteUInt16(directory.NumberOfIdEntries);
            uint n = (uint)directory.Entries.Count;
            uint k = offset + 16 + n * 8;
            for (int i = 0; i < n; i++)
            {
                int id;
                string name;
                uint nameOffset = (uint)dataWriter.Position + sizeOfDirectoryTree;
                uint directoryOffset = k;
                Directory subDir = directory.Entries[i] as Directory;
                if (subDir != null)
                {
                    id = subDir.ID;
                    name = subDir.Name;
                    if (level == 0)
                    {
                        k += SizeOfDirectory(subDir);
                    }
                    else
                    {
                        k += 16 + 8 * (uint)subDir.Entries.Count;
                    }
                }
                else
                {
                    //EDMAURER write out an IMAGE_RESOURCE_DATA_ENTRY followed
                    //immediately by the data that it refers to. This results
                    //in a layout different than that produced by pulling the resources
                    //from an OBJ. In that case all of the data bits of a resource are
                    //contiguous in .rsrc$02. After processing these will end up at
                    //the end of .rsrc following all of the directory
                    //info and IMAGE_RESOURCE_DATA_ENTRYs
                    IWin32Resource r = (IWin32Resource)directory.Entries[i];
                    id = level == 0 ? r.TypeId : level == 1 ? r.Id : (int)r.LanguageId;
                    name = level == 0 ? r.TypeName : level == 1 ? r.Name : null;
                    dataWriter.WriteUInt32((uint)(virtualAddressBase + sizeOfDirectoryTree + 16 + dataWriter.Position));
                    byte[] data = new List<byte>(r.Data).ToArray();
                    dataWriter.WriteUInt32((uint)data.Length);
                    dataWriter.WriteUInt32(r.CodePage);
                    dataWriter.WriteUInt32(0);
                    dataWriter.WriteBytes(data);
                    while ((dataWriter.Length % 4) != 0)
                    {
                        dataWriter.WriteByte(0);
                    }
                }

                if (id >= 0)
                {
                    writer.WriteInt32(id);
                }
                else
                {
                    if (name == null)
                    {
                        name = string.Empty;
                    }

                    writer.WriteUInt32(nameOffset | 0x80000000);
                    dataWriter.WriteUInt16((ushort)name.Length);
                    dataWriter.WriteUTF16(name);
                }

                if (subDir != null)
                {
                    writer.WriteUInt32(directoryOffset | 0x80000000);
                }
                else
                {
                    writer.WriteUInt32(nameOffset);
                }
            }

            k = offset + 16 + n * 8;
            for (int i = 0; i < n; i++)
            {
                Directory subDir = directory.Entries[i] as Directory;
                if (subDir != null)
                {
                    this.WriteDirectory(subDir, writer, k, level + 1, sizeOfDirectoryTree, virtualAddressBase, dataWriter);
                    if (level == 0)
                    {
                        k += SizeOfDirectory(subDir);
                    }
                    else
                    {
                        k += 16 + 8 * (uint)subDir.Entries.Count;
                    }
                }
            }
        }
开发者ID:rjmurillo,项目名称:roslyn,代码行数:97,代码来源:PeWriter.cs

示例6: SerializeRowCounts

 private static void SerializeRowCounts(BlobBuilder writer, ImmutableArray<int> rowCounts, ulong includeTables)
 {
     for (int i = 0; i < rowCounts.Length; i++)
     {
         if (((1UL << i) & includeTables) != 0)
         {
             int rowCount = rowCounts[i];
             if (rowCount > 0)
             {
                 writer.WriteInt32(rowCount);
             }
         }
     }
 }
开发者ID:rgani,项目名称:roslyn,代码行数:14,代码来源:MetadataTablesBuilder.cs

示例7: WriteConstant

        internal static void WriteConstant(BlobBuilder writer, object value)
        {
            if (value == null)
            {
                // The encoding of Type for the nullref value for FieldInit is ELEMENT_TYPE_CLASS with a Value of a 32-bit.
                writer.WriteUInt32(0);
                return;
            }

            var type = value.GetType();
            if (type.GetTypeInfo().IsEnum)
            {
                type = Enum.GetUnderlyingType(type);
            }

            if (type == typeof(bool))
            {
                writer.WriteBoolean((bool)value);
            }
            else if (type == typeof(int))
            {
                writer.WriteInt32((int)value);
            }
            else if (type == typeof(string))
            {
                writer.WriteUTF16((string)value);
            }
            else if (type == typeof(byte))
            {
                writer.WriteByte((byte)value);
            }
            else if (type == typeof(char))
            {
                writer.WriteUInt16((char)value);
            }
            else if (type == typeof(double))
            {
                writer.WriteDouble((double)value);
            }
            else if (type == typeof(short))
            {
                writer.WriteInt16((short)value);
            }
            else if (type == typeof(long))
            {
                writer.WriteInt64((long)value);
            }
            else if (type == typeof(sbyte))
            {
                writer.WriteSByte((sbyte)value);
            }
            else if (type == typeof(float))
            {
                writer.WriteSingle((float)value);
            }
            else if (type == typeof(ushort))
            {
                writer.WriteUInt16((ushort)value);
            }
            else if (type == typeof(uint))
            {
                writer.WriteUInt32((uint)value);
            }
            else if (type == typeof(ulong))
            {
                writer.WriteUInt64((ulong)value);
            }
            else
            {
                // TODO: message
                throw new ArgumentException();
            }
        }
开发者ID:SoumikMukherjeeDOTNET,项目名称:roslyn,代码行数:73,代码来源:BlobWriterImpl.cs


注:本文中的Microsoft.Cci.BlobBuilder.WriteInt32方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。