本文整理汇总了C#中Transceiver.addAntConfig方法的典型用法代码示例。如果您正苦于以下问题：C# Transceiver.addAntConfig方法的具体用法？C# Transceiver.addAntConfig怎么用？C# Transceiver.addAntConfig使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类Transceiver的用法示例。
在下文中一共展示了Transceiver.addAntConfig方法的5个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C#代码示例。
示例1: GetMainAntTest
public void GetMainAntTest()
{
trans1 = new Transceiver();
AntConfig atcfg1=new AntConfig();
AntConfig atcfg2 = new AntConfig();
AntConfig atcfg3 = new AntConfig();
atcfg1.IsMainAnt = false;
atcfg2.IsMainAnt = false;
atcfg3.IsMainAnt = true;
trans1.addAntConfig(atcfg1);
trans1.addAntConfig(atcfg2);
trans1.addAntConfig(atcfg3);
Assert.AreEqual(atcfg3, Tool.GetMainAnt(trans1));
}示例2: Init
public void Init()
{
matrix = new TrueFalseMatrix(10, 10, 0.0, 10.0, 1, true);
cell = new MockCell();
termianl = new Terminal();
//termianl.Gain = 3f;
CsService = new UnionCsService();
CsService.BodyLoss = 5f;
PsService = new UnionPsService();
PsService.BodyLoss = 5f;
AntConfig1 = new AntConfig();
AntConfig1.IsMainAnt = true;
AntConfig1.DlTotalLoss = 6f;
AntConfig1.IsUserInput = false;
AntConfig1.Feeder = new FeederEquipment();
tran = new Transceiver();
site = new Site();
site.Equipment = new BtsEquipment();
site.Equipment.NoiseFigure = 4f;
site.X = 1;
site.Y = 1;
tran.Parent = site;
tran.addAntConfig(AntConfig1);
cell.Parent = tran;
LinkLossAssist.Init();
}示例3: Init
public void Init()
{
IProject project = new MockProject();
ProjectSingleton.CurrentProject = project;
IGeoProvider Geo = new MockGeoProvider();
ProjectSingleton.CurrentProject.AppContext.RegisterService(Geo);
m_Target = new CalcCellToCellLinkLoss(ProjectSingleton.CurrentProject.AppContext);
m_CellFrom = new MockIACell();
m_CellTo = new MockIACell();
FrequencyBand fromBand = new FrequencyBand();
fromBand.DLFrequency = 900;
m_CellFrom.FreqBand = fromBand;
Transceiver fromParent = new Transceiver();
IASite fromSite = new Site();
fromSite.X = 0;
fromSite.Y = 0;
fromParent.setParent(fromSite);
//List<AntConfig> fromConfigs = new List<AntConfig>();
AntConfig fromConfig1 = new AntConfig();
fromConfig1.OutdoorAntenna = new AntennaEntity();
fromConfig1.AntType = 1;
fromConfig1.Height = 30;
fromConfig1.SectorID = 0;
//fromConfigs.Add(fromConfig1);
fromParent.addAntConfig(fromConfig1);
m_CellFrom.setParent(fromParent, m_CellFrom);
FrequencyBand toBand = new FrequencyBand();
toBand.DLFrequency = 905;
m_CellTo.FreqBand = toBand;
Transceiver toParent = new Transceiver();
IASite toSite = new Site();
toSite.X = 4;
toSite.Y = 3;
toParent.setParent(toSite);
AntConfig toConfig = new AntConfig();
toConfig.OutdoorAntenna = new AntennaEntity();
toConfig.AntType = 1;
toConfig.Height = 25;
toConfig.SectorID = 0;
toParent.addAntConfig(toConfig);
m_CellTo.setParent(toParent, m_CellTo);
}示例4: InitCell
private static void InitCell(out IACell cell1, out IACell cell2)
{
cell1 = new MockACell();
cell1.ID = 1;
FrequencyBand Fre1 = new FrequencyBand();
Fre1.DLFrequency = 900;
cell1.FreqBand = Fre1;
Transceiver Trans1 = new Transceiver();
IASite Site1 = new Site();
Site1.X = 0;
Site1.Y = 0;
((Site)Site1).Equipment = new BtsEquipment();
Trans1.setParent(Site1);
AntConfig Ant1 = new AntConfig();
Ant1.OutdoorAntenna = new AntennaEntity();
Ant1.AntType = 1;
Ant1.Height = 25;
Ant1.SectorID = 0;
Ant1.IsMainAnt = true;
Trans1.addAntConfig(Ant1);
cell1.setParent(Trans1, cell1);
cell2 = new MockACell();
cell2.ID = 2;
FrequencyBand Fre2 = new FrequencyBand();
Fre2.DLFrequency = 925;
cell2.FreqBand = Fre2;
Transceiver Trans2 = new Transceiver();
IASite Site2 = new Site();
Site2.X = 10;
Site2.Y = 10;
((Site)Site2).Equipment = new BtsEquipment();
Trans2.setParent(Site2);
AntConfig Ant2 = new AntConfig();
Ant2.OutdoorAntenna = new AntennaEntity();
Ant2.AntType = 1;
Ant2.Height = 25;
Ant2.SectorID = 0;
Ant2.IsMainAnt = true;
Trans2.addAntConfig(Ant2);
cell2.setParent(Trans2, cell2);
}示例5: GetAntConfig
private void GetAntConfig(Transceiver cell)
{
cell.addAntConfig(cell.AntConfiguration[0]);
//cell.set_AntSetUp(cell.get_AntConfiguration()[0]);
}