C# ProcessorPin类代码示例

        /// <summary>
        /// Allocates the specified pin.
        /// </summary>
        /// <param name="pin">The pin.</param>
        /// <param name="direction">The direction.</param>
        public void Allocate(ProcessorPin pin, PinDirection direction)
        {
            var gpioId = string.Format("gpio{0}", (int)pin);
            if (Directory.Exists(Path.Combine(gpioPath, gpioId)))
            {
                // Reinitialize pin virtual file
                using (var streamWriter = new StreamWriter(Path.Combine(gpioPath, "unexport"), false))
                    streamWriter.Write((int) pin);
            }

            // Export pin for file mode
            using (var streamWriter = new StreamWriter(Path.Combine(gpioPath, "export"), false))
                streamWriter.Write((int)pin);

            // Set the direction on the pin and update the exported list
            SetPinMode(pin, direction == PinDirection.Input ? Interop.BCM2835_GPIO_FSEL_INPT : Interop.BCM2835_GPIO_FSEL_OUTP);

            // Set direction in pin virtual file
            var filePath = Path.Combine(gpioId, "direction");
            using (var streamWriter = new StreamWriter(Path.Combine(gpioPath, filePath), false))
                streamWriter.Write(direction == PinDirection.Input ? "in" : "out");

            if (direction == PinDirection.Input)
            {
                PinResistor pinResistor;
                if (!pinResistors.TryGetValue(pin, out pinResistor) || pinResistor != PinResistor.None)
                    SetPinResistor(pin, PinResistor.None);

                SetPinDetectedEdges(pin, PinDetectedEdges.Both);
                InitializePoll(pin);
            }
        }

        public SpiConnection(ProcessorPin clock, ProcessorPin ss, ProcessorPin? miso, ProcessorPin? mosi, Endianness endianness)
        {
            this.clock = clock;
            this.ss = ss;
            this.miso = miso;
            this.mosi = mosi;
            this.endianness = endianness;

            driver = GpioConnectionSettings.DefaultDriver;

            driver.Allocate(clock, PinDirection.Output);
            driver.Write(clock, false);

            driver.Allocate(ss, PinDirection.Output);
            driver.Write(ss, true);

            if (mosi.HasValue)
            {
                driver.Allocate(mosi.Value, PinDirection.Output);
                driver.Write(mosi.Value, false);
            }

            if (miso.HasValue)
                driver.Allocate(miso.Value, PinDirection.Input);
        }

        public GpioOutputPin(IGpioConnectionDriver driver, ProcessorPin pin)
        {
            this.driver = driver;
            this.pin = pin;

            driver.Allocate(pin, PinDirection.Output);
        }

        /// <summary>
        /// Allocates the specified pin.
        /// </summary>
        /// <param name="pin">The pin.</param>
        /// <param name="direction">The direction.</param>
        public void Allocate(ProcessorPin pin, PinDirection direction)
        {
            Release(pin);

            using (var streamWriter = new StreamWriter(Path.Combine(gpioPath, "export"), false))
                streamWriter.Write((int)pin);

            if (!gpioPathList.ContainsKey(pin))
            {
                var gpio = new FileGpioHandle { GpioPath = GuessGpioPath(pin) };
                gpioPathList.Add(pin, gpio);
            }

            var filePath = Path.Combine(gpioPathList[pin].GpioPath, "direction");
            try {
                SetPinDirection(filePath, direction);
            }
            catch (UnauthorizedAccessException) {
                // program hasn't been started as root, give it a second to correct file permissions
                Thread.Sleep(TimeSpan.FromSeconds(1));
                SetPinDirection(filePath, direction);
            }

            gpioPathList[pin].GpioStream = new FileStream(Path.Combine(GuessGpioPath(pin), "value"), FileMode.Open, FileAccess.ReadWrite, FileShare.ReadWrite);
        }

        /// <summary>
        /// Initializes a new instance of the <see cref="I2cDriver"/> class.
        /// </summary>
        /// <param name="sdaPin">The SDA pin.</param>
        /// <param name="sclPin">The SCL pin.</param>
        public I2cDriver(ProcessorPin sdaPin, ProcessorPin sclPin)
        {
            this.sdaPin = sdaPin;
            this.sclPin = sclPin;

            var bscBase = GetBscBase(sdaPin, sclPin);

            var memoryFile = Interop.open("/dev/mem", Interop.O_RDWR + Interop.O_SYNC);
            try
            {
                gpioAddress = Interop.mmap(IntPtr.Zero, Interop.BCM2835_BLOCK_SIZE, Interop.PROT_READ | Interop.PROT_WRITE, Interop.MAP_SHARED, memoryFile, Interop.BCM2835_GPIO_BASE);
                bscAddress = Interop.mmap(IntPtr.Zero, Interop.BCM2835_BLOCK_SIZE, Interop.PROT_READ | Interop.PROT_WRITE, Interop.MAP_SHARED, memoryFile, bscBase);
            }
            finally
            {
                Interop.close(memoryFile);
            }

            if (bscAddress == (IntPtr) Interop.MAP_FAILED)
                throw new InvalidOperationException("Unable to access device memory");

            // Set the I2C pins to the Alt 0 function to enable I2C access on them
            SetPinMode((uint) (int) sdaPin, Interop.BCM2835_GPIO_FSEL_ALT0); // SDA
            SetPinMode((uint) (int) sclPin, Interop.BCM2835_GPIO_FSEL_ALT0); // SCL

            // Read the clock divider register
            var dividerAddress = bscAddress + (int) Interop.BCM2835_BSC_DIV;
            var divider = (ushort) SafeReadUInt32(dividerAddress);
            waitInterval = GetWaitInterval(divider);

            var addressAddress = bscAddress + (int) Interop.BCM2835_BSC_A;
            SafeWriteUInt32(addressAddress, (uint) currentDeviceAddress);
        }

        /// <summary>
        /// Allocates the specified pin.
        /// </summary>
        /// <param name="pin">The pin.</param>
        /// <param name="direction">The direction.</param>
        public void Allocate(ProcessorPin pin, PinDirection direction)
        {
            // Set the direction on the pin and update the exported list
            SetPinMode(pin, direction == PinDirection.Input ? Interop.BCM2835_GPIO_FSEL_INPT : Interop.BCM2835_GPIO_FSEL_OUTP);

            if (direction == PinDirection.Input)
                SetPinResistor(pin, PinResistor.None);
        }

        /// <summary>
        /// Initializes a new instance of the <see cref="GpioOutputBinaryPin"/> class.
        /// </summary>
        /// <param name="driver">The driver.</param>
        /// <param name="pin">The pin.</param>
        /// <param name="resistor">The resistor.</param>
        public GpioOutputBinaryPin(IGpioConnectionDriver driver, ProcessorPin pin, PinResistor resistor = PinResistor.None)
        {
            this.driver = driver;
            this.pin = pin;

            driver.Allocate(pin, PinDirection.Output);
            driver.SetPinResistor(pin, resistor);
        }

        /// <summary>
        /// Initializes a new instance of the <see cref="Hd44780LcdConnection"/> class.
        /// </summary>
        /// <param name="settings">The settings.</param>
        /// <param name="registerSelectPin">The register select pin.</param>
        /// <param name="clockPin">The clock pin.</param>
        /// <param name="dataPins">The data pins.</param>
        public Hd44780LcdConnection(Hd44780LcdConnectionSettings settings, ProcessorPin registerSelectPin, ProcessorPin clockPin, IEnumerable<ProcessorPin> dataPins)
        {
            settings = settings ?? new Hd44780LcdConnectionSettings();

            this.registerSelectPin = registerSelectPin;
            this.clockPin = clockPin;
            this.dataPins = dataPins.ToArray();

            if (this.dataPins.Length != 4 && this.dataPins.Length != 8)
                throw new ArgumentOutOfRangeException("dataPins", this.dataPins.Length, "There must be either 4 or 8 data pins");

            width = settings.ScreenWidth;
            height = settings.ScreenHeight;
            if (height < 1 || height > 2)
                throw new ArgumentOutOfRangeException("ScreenHeight", height, "Screen must have either 1 or 2 rows");
            if (width * height > 80)
                throw new ArgumentException("At most 80 characters are allowed");

            if (settings.PatternWidth != 5)
                throw new ArgumentOutOfRangeException("PatternWidth", settings.PatternWidth, "Pattern must be 5 pixels width");
            if (settings.PatternHeight != 8 && settings.PatternHeight != 10)
                throw new ArgumentOutOfRangeException("PatternHeight", settings.PatternWidth, "Pattern must be either 7 or 10 pixels height");
            if (settings.PatternHeight == 10 && height == 2)
                throw new ArgumentException("10 pixels height pattern cannot be used with 2 rows");

            functions = (settings.PatternHeight == 8 ? Functions.Matrix5x8 : Functions.Matrix5x10)
                | (height == 1 ? Functions.OneLine : Functions.TwoLines)
                | (this.dataPins.Length == 4 ? Functions.Data4bits : Functions.Data8bits);

            entryModeFlags = /*settings.RightToLeft
                ? EntryModeFlags.EntryRight | EntryModeFlags.EntryShiftDecrement
                :*/ EntryModeFlags.EntryLeft | EntryModeFlags.EntryShiftDecrement;

            encoding = settings.Encoding;

            connectionDriver = new MemoryGpioConnectionDriver();

            connectionDriver.Allocate(registerSelectPin, PinDirection.Output);
            connectionDriver.Write(registerSelectPin, false);

            connectionDriver.Allocate(clockPin, PinDirection.Output);
            connectionDriver.Write(clockPin, false);

            foreach (var dataPin in this.dataPins)
            {
                connectionDriver.Allocate(dataPin, PinDirection.Output);
                connectionDriver.Write(dataPin, false);
            }

            WriteByte(0x33, false); // Initialize
            WriteByte(0x32, false);

            WriteCommand(Command.SetFunctions, (int) functions);
            WriteCommand(Command.SetDisplayFlags, (int) displayFlags);
            WriteCommand(Command.SetEntryModeFlags, (int) entryModeFlags);

            Clear();
        }

        /// <summary>
        /// Waits for a pin to reach the specified state, then measures the time it remains in this state.
        /// </summary>
        /// <param name="driver">The driver.</param>
        /// <param name="pin">The measure pin.</param>
        /// <param name="waitForUp">if set to <c>true</c>, wait for the pin to be up.</param>
        /// <param name="phase1Timeout">The first phase timeout.</param>
        /// <param name="phase2Timeout">The second phase timeout.</param>
        /// <returns>
        /// The time the pin remains up, in milliseconds.
        /// </returns>
        public static decimal Time(this IGpioConnectionDriver driver, ProcessorPin pin, bool waitForUp = true, decimal phase1Timeout = 0, decimal phase2Timeout = 0)
        {
            driver.Wait(pin, waitForUp, phase1Timeout);

            var waitDown = DateTime.Now.Ticks;
            driver.Wait(pin, !waitForUp, phase2Timeout);

            return (DateTime.Now.Ticks - waitDown)/10000m;
        }

        /// <summary>
        /// Initializes a new instance of the <see cref="GpioOutputBinaryPin"/> class.
        /// </summary>
        /// <param name="driver">The driver.</param>
        /// <param name="pin">The pin.</param>
        /// <param name="resistor">The resistor.</param>
        public GpioOutputBinaryPin(IGpioConnectionDriver driver, ProcessorPin pin, PinResistor resistor = PinResistor.None)
        {
            this.driver = driver;
            this.pin = pin;

            driver.Allocate(pin, PinDirection.Output);
            if ((driver.GetCapabilities() & GpioConnectionDriverCapabilities.CanSetPinResistor) > 0)
                driver.SetPinResistor(pin, resistor);
        }

        /// <summary>
        /// Reads the status of the specified pin.
        /// </summary>
        /// <param name="pin">The pin.</param>
        /// <returns>
        /// The pin status.
        /// </returns>
        public bool Read(ProcessorPin pin)
        {
            int shift;
            var offset = Math.DivRem((int) pin, 32, out shift);

            var pinGroupAddress = gpioAddress + (int) (Interop.BCM2835_GPLEV0 + offset);
            var value = SafeReadUInt32(pinGroupAddress);

            return (value & (1 << shift)) != 0;
        }

        /// <summary>
        /// Initializes a new instance of the <see cref="HcSr04Connection"/> class.
        /// </summary>
        /// <param name="triggerPin">The trigger pin.</param>
        /// <param name="echoPin">The echo pin.</param>
        public HcSr04Connection(ProcessorPin triggerPin, ProcessorPin echoPin)
        {
            this.triggerPin = triggerPin;
            this.echoPin = echoPin;

            driver = new MemoryGpioConnectionDriver();

            driver.Allocate(triggerPin, PinDirection.Output);
            driver.Allocate(echoPin, PinDirection.Input);
        }

        /// <summary>
        /// Reads the status of the specified pin.
        /// </summary>
        /// <param name="pin">The pin.</param>
        /// <returns>
        /// The pin status.
        /// </returns>
        public bool Read(ProcessorPin pin)
        {
            var gpioId = string.Format("gpio{0}", (int) pin);
            var filePath = Path.Combine(gpioId, "value");

            using (var streamReader = new StreamReader(new FileStream(Path.Combine(gpioPath, filePath), FileMode.Open, FileAccess.Read, FileShare.ReadWrite)))
            {
                var rawValue = streamReader.ReadToEnd();
                return !string.IsNullOrEmpty(rawValue) && rawValue[0] == '1';
            }
        }

        /// <summary>
        /// Reads the status of the specified pin.
        /// </summary>
        /// <param name="pin">The pin.</param>
        /// <returns>
        /// The pin status.
        /// </returns>
        public bool Read(ProcessorPin pin)
        {
            var shift = (byte)((int)pin % 32);
            var value = Interop.bcm2835_gpioperi_read((uint)pin / 32);

            return (value & (1 << shift)) != 0;

            /*
            var value = Interop.bcm2835_gpio_lev((uint)pin);
            return value != 0;
            */
        }

        /// <summary>
        /// Waits for the specified pin to reach a given state.
        /// </summary>
        /// <param name="driver">The driver.</param>
        /// <param name="pin">The pin.</param>
        /// <param name="waitForUp">if set to <c>true</c>, waits for the pin to become up; otherwise, waits for the pin to become down.</param>
        /// <param name="timeout">The timeout.</param>
        public static void Wait(this IGpioConnectionDriver driver, ProcessorPin pin, bool waitForUp = true, int timeout = 0)
        {
            if (timeout == 0)
                timeout = 5000;

            var startWait = DateTime.Now;
            while (driver.Read(pin) != waitForUp)
            {
                if (DateTime.Now.Ticks - startWait.Ticks >= 10000*timeout)
                    throw new TimeoutException();
            }
        }