本文整理汇总了C#中MessageBus.SubscriberFor方法的典型用法代码示例。如果您正苦于以下问题：C# MessageBus.SubscriberFor方法的具体用法？C# MessageBus.SubscriberFor怎么用？C# MessageBus.SubscriberFor使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类MessageBus的用法示例。
在下文中一共展示了MessageBus.SubscriberFor方法的13个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C#代码示例。
示例1: CanFindExplicitTypes
public void CanFindExplicitTypes()
{
var bus = new MessageBus();
bus.SubscriberFor<TestMessageBase>(m => { });
bus.SubscriberFor<TestMessageTypeA>(m => { });
bus.SubscriberFor<TestMessageTypeB>(m => { });
bus.FindSubscribersOfExplicitType(typeof(TestMessageTypeA))
.Should().HaveCount(1);
bus.FindSubscribersOfExplicitType(typeof(TestMessageBase))
.Should().HaveCount(1);
}示例2: HeavyLoadTest
public void HeavyLoadTest()
{
const int REPEATER_COUNT = 10;
const int MESSAGE_COUNT = 200;
// Arrange
var bus = new MessageBus();
var receivers = new MessageRepeater[REPEATER_COUNT];
for (var i = 0; i < REPEATER_COUNT; i++)
{
receivers[i] = new MessageRepeater(bus, i);
bus.SubscriberFor<RepeatingMessage>(receivers[i].Receive);
}
// Act
var messages = new RepeatingMessage[MESSAGE_COUNT];
for (var i = 0; i < MESSAGE_COUNT; i++)
{
messages[i] = new RepeatingMessage();
bus.SendMessage(messages[i]);
}
// Assert
var finished = false;
while (!finished)
{
System.Threading.Thread.Sleep(500);
var count = messages.Count(m => m.Counter == REPEATER_COUNT);
Console.WriteLine(count);
if (count == MESSAGE_COUNT)
finished = true;
}
}示例3: TrueWithExactMatch
public void TrueWithExactMatch()
{
var bus = new MessageBus();
bus.SubscriberFor<Message>(m => { });
bus.HasSubscriberFor<Message>()
.Should().BeTrue(
"subscriber for type was added");
}示例4: TrueWithDerivedType
public void TrueWithDerivedType()
{
var bus = new MessageBus();
bus.SubscriberFor<TestMessageBase>(m => { });
bus.HasSubscriberFor<TestMessageTypeA>()
.Should().BeTrue(
"subscriber for super type was added");
}示例5: FalseWithSuperType
public void FalseWithSuperType()
{
var bus = new MessageBus();
bus.SubscriberFor<TestMessageTypeA>(m => { });
bus.HasSubscriberFor<TestMessageBase>()
.Should().BeFalse(
"subscriber for derived type was added");
}示例6: FalseWithNonMatch
public void FalseWithNonMatch()
{
var bus = new MessageBus();
bus.SubscriberFor<TestMessageTypeA>(m => { });
bus.HasSubscriberFor<TestMessageTypeB>()
.Should().BeFalse(
"no subscriber for type was added");
}示例7: SetUp
public void SetUp()
{
bus = new MessageBus();
var receiverForA = new TestMessageReceiver("receiverForA");
var receiverForB = new TestMessageReceiver("receiverForB");
var receiverForAll = new TestMessageReceiver("receiverForAll");
subscriberA = bus.SubscriberFor<TestMessageTypeA>(receiverForA.Receive);
subscriberB = bus.SubscriberFor<TestMessageTypeB>(receiverForB.Receive);
subscriberC = bus.SubscriberFor<TestMessageBase>(receiverForAll.Receive);
testMessageA = new TestMessageTypeA();
testMessageB = new TestMessageTypeB();
testMessageC = new TestMessageTypeC();
bus.SendMessage(testMessageB);
bus.SendMessage(testMessageC);
Thread.Sleep(100);
}示例8: IncrementsWhenAddingSubscribers
public void IncrementsWhenAddingSubscribers()
{
var bus = new MessageBus();
if (bus.GetSubscriberCount != 0)
Assert.Inconclusive("SubscriberCount should start at 0");
bus.SubscriberFor<Message>(_ => { });
bus.GetSubscriberCount.Should().Be(1);
}示例9: RetainsSubscriptions
public void RetainsSubscriptions()
{
// Arrange
var bus = new MessageBus();
// Act
for (var i = 0; i < 1000; i++)
bus.SubscriberFor<Message>(NoAction);
// Assert
bus.GetSubscriberCount
.Should().Be(1000);
}示例10: CopesWithHighConcurrencySubscriptions
public void CopesWithHighConcurrencySubscriptions()
{
// Arrange
var bus = new MessageBus();
// Act
for (var i = 0; i < 1000; i++)
bus.SubscriberFor<Message>(NoAction);
// Assert
bus.GetSubscriberCount
.Should().Be(1000);
}示例11: WhenTheyAreStillBeingReferenced
public void WhenTheyAreStillBeingReferenced()
{
// Arrange
var subscribers = new Subscriber<TestMessageTypeA>[100];
var bus = new MessageBus();
for (var i = 0; i < 100; i++)
{
subscribers[i] = bus.SubscriberFor<TestMessageTypeA>(NoAction);
}
// Act
GC.Collect();
// Assert
bus.GetSubscriberCount.Should().Be(100);
}示例12: DecrementsWhenSubscribersAreGarbageCollected
public void DecrementsWhenSubscribersAreGarbageCollected()
{
var bus = new MessageBus();
// ReSharper disable once NotAccessedVariable
var subscriber = bus.SubscriberFor<Message>(NoAction);
Wait.For(() => bus.GetSubscriberCount == 1);
// ReSharper disable once RedundantAssignment
subscriber = null;
GC.Collect();
Wait.For(() => bus.GetSubscriberCount == 0);
bus.GetSubscriberCount.Should().Be(0);
}示例13: WhenSubscriberThrowsException
public void WhenSubscriberThrowsException()
{
// Arrange
var bus = new MessageBus();
bus.SubscriberFor<Message>(
m =>
{
throw new Exception();
});
var exceptions = new Collection<AggregateException>();
bus.ExceptionListener = exceptions.Add;
// Act
bus.SendMessage(new TestMessageTypeA());
// Assert
while (exceptions.Count == 0)
{
Thread.Sleep(100);
}
}