C++ Match::isValid方法代码示例

    void testLayerUpdates()
    {

      QgsPointLocator loc( mVL );

      QgsPointLocator::Match mAddV0 = loc.nearestVertex( QgsPointXY( 12, 12 ), 999 );
      QVERIFY( mAddV0.isValid() );
      QCOMPARE( mAddV0.point(), QgsPointXY( 1, 1 ) );

      mVL->startEditing();

      // add a new feature
      QgsFeature ff( 0 );
      QgsPolygon polygon;
      QgsPolyline polyline;
      polyline << QgsPointXY( 10, 11 ) << QgsPointXY( 11, 10 ) << QgsPointXY( 11, 11 ) << QgsPointXY( 10, 11 );
      polygon << polyline;
      QgsGeometry ffGeom = QgsGeometry::fromPolygon( polygon ) ;
      ff.setGeometry( ffGeom );
      QgsFeatureList flist;
      flist << ff;
      bool resA = mVL->addFeature( ff );
      QVERIFY( resA );

      // verify it is added in the point locator
      QgsPointLocator::Match mAddV = loc.nearestVertex( QgsPointXY( 12, 12 ), 999 );
      QVERIFY( mAddV.isValid() );
      QCOMPARE( mAddV.point(), QgsPointXY( 11, 11 ) );
      QgsPointLocator::Match mAddE = loc.nearestEdge( QgsPointXY( 11.1, 10.5 ), 999 );
      QVERIFY( mAddE.isValid() );
      QCOMPARE( mAddE.point(), QgsPointXY( 11, 10.5 ) );
      QgsPointLocator::MatchList mAddA = loc.pointInPolygon( QgsPointXY( 10.8, 10.8 ) );
      QVERIFY( mAddA.count() == 1 );

      // change geometry
      QgsGeometry *newGeom = new QgsGeometry( ff.geometry() );
      newGeom->moveVertex( 10, 10, 2 ); // change 11,11 to 10,10
      mVL->changeGeometry( ff.id(), *newGeom );
      delete newGeom;

      // verify it is changed in the point locator
      QgsPointLocator::Match mChV = loc.nearestVertex( QgsPointXY( 12, 12 ), 999 );
      QVERIFY( mChV.isValid() );
      QVERIFY( mChV.point() != QgsPointXY( 11, 11 ) ); // that point does not exist anymore
      mChV = loc.nearestVertex( QgsPointXY( 9, 9 ), 999 );
      QVERIFY( mChV.isValid() );
      QVERIFY( mChV.point() == QgsPointXY( 10, 10 ) ); // updated point

      // delete feature
      bool resD = mVL->deleteFeature( ff.id() );
      QVERIFY( resD );

      // verify it is deleted from the point locator
      QgsPointLocator::Match mDelV = loc.nearestVertex( QgsPointXY( 12, 12 ), 999 );
      QVERIFY( mDelV.isValid() );
      QCOMPARE( mDelV.point(), QgsPointXY( 1, 1 ) );

      mVL->rollBack();
    }

QList<QgsPointXY> QgsAdvancedDigitizingDockWidget::snapSegmentToAllLayers( const QgsPointXY &originalMapPoint, bool *snapped ) const
{
  QList<QgsPointXY> segment;
  QgsPointXY pt1, pt2;
  QgsPointLocator::Match match;

  QgsSnappingUtils *snappingUtils = mMapCanvas->snappingUtils();

  QgsSnappingConfig canvasConfig = snappingUtils->config();
  QgsSnappingConfig localConfig = snappingUtils->config();

  localConfig.setMode( QgsSnappingConfig::AllLayers );
  localConfig.setType( QgsSnappingConfig::Segment );
  snappingUtils->setConfig( localConfig );

  match = snappingUtils->snapToMap( originalMapPoint );

  snappingUtils->setConfig( canvasConfig );

  if ( match.isValid() && match.hasEdge() )
  {
    match.edgePoints( pt1, pt2 );
    segment << pt1 << pt2;
  }

  if ( snapped )
  {
    *snapped = segment.count() == 2;
  }

  return segment;
}

void QgsMapToolOffsetCurve::canvasMoveEvent( QgsMapMouseEvent* e )
{
  delete mSnapVertexMarker;
  mSnapVertexMarker = nullptr;

  if ( !mOriginalGeometry || !mRubberBand )
  {
    return;
  }

  QgsVectorLayer* layer = currentVectorLayer();
  if ( !layer )
  {
    return;
  }


  mGeometryModified = true;

  //get offset from current position rectangular to feature
  QgsPoint layerCoords = toLayerCoordinates( layer, e->pos() );

  //snap cursor to background layers
  QgsPointLocator::Match m = mCanvas->snappingUtils()->snapToMap( e->pos() );
  if ( m.isValid() )
  {
    if (( m.layer() && m.layer()->id() != mSourceLayerId ) || m.featureId() != mModifiedFeature )
    {
      layerCoords = toLayerCoordinates( layer, m.point() );
      mSnapVertexMarker = new QgsVertexMarker( mCanvas );
      mSnapVertexMarker->setIconType( QgsVertexMarker::ICON_CROSS );
      mSnapVertexMarker->setColor( Qt::green );
      mSnapVertexMarker->setPenWidth( 1 );
      mSnapVertexMarker->setCenter( m.point() );
    }
  }

  QgsPoint minDistPoint;
  int beforeVertex;
  double leftOf;
  double offset = sqrt( mOriginalGeometry->closestSegmentWithContext( layerCoords, minDistPoint, beforeVertex, &leftOf ) );
  if ( offset == 0.0 )
  {
    return;
  }



  if ( mDistanceWidget )
  {
    // this will also set the rubber band
    mDistanceWidget->setValue( leftOf < 0 ? offset : -offset );
    mDistanceWidget->setFocus( Qt::TabFocusReason );
  }
  else
  {
    //create offset geometry using geos
    setOffsetForRubberBand( leftOf < 0 ? offset : -offset );
  }
}

void QgsMapCoordsDialog::maybeSetXY( const QgsPoint & xy, Qt::MouseButton button )
{
  // Only LeftButton should set point
  if ( Qt::LeftButton == button )
  {
    QgsPoint mapCoordPoint = xy;
    if ( mQgisCanvas && mSnapToBackgroundLayerBox->isChecked() )
    {
      QgsPointLocator::Match m = mQgisCanvas->snappingUtils()->snapToMap( xy );
      if ( m.isValid() )
        mapCoordPoint = m.point();
    }

    leXCoord->clear();
    leYCoord->clear();
    leXCoord->setText( qgsDoubleToString( mapCoordPoint.x() ) );
    leYCoord->setText( qgsDoubleToString( mapCoordPoint.y() ) );
  }

  parentWidget()->showNormal();
  parentWidget()->activateWindow();
  parentWidget()->raise();

  mPointFromCanvasPushButton->setChecked( false );
  buttonBox->button( QDialogButtonBox::Ok )->setFocus();
  activateWindow();
  raise();
}

void QgsMapToolNodeTool::canvasPressEvent( QMouseEvent * e )
{
  QgsDebugCall;

  mClicked = true;
  mPressCoordinates = e->pos();
  if ( !mSelectedFeature )
  {
    QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mCanvas->currentLayer() );
    if ( !vlayer )
      return;

    mSelectAnother = false;
    QgsPointLocator::Match m = mCanvas->snappingUtils()->snapToCurrentLayer( e->pos(), QgsPointLocator::Vertex | QgsPointLocator::Edge );
    if ( !m.isValid() )
    {
      emit messageEmitted( tr( "could not snap to a segment on the current layer." ) );
      return;
    }

    // remove previous warning
    emit messageDiscarded();

    mSelectedFeature = new QgsSelectedFeature( m.featureId(), vlayer, mCanvas );
    connect( QgisApp::instance()->layerTreeView(), SIGNAL( currentLayerChanged( QgsMapLayer* ) ), this, SLOT( currentLayerChanged( QgsMapLayer* ) ) );
    connect( mSelectedFeature, SIGNAL( destroyed() ), this, SLOT( selectedFeatureDestroyed() ) );
    connect( vlayer, SIGNAL( editingStopped() ), this, SLOT( editingToggled() ) );
    mIsPoint = vlayer->geometryType() == QGis::Point;
  }

    void testSnapModeAll()
    {
      QgsMapSettings mapSettings;
      mapSettings.setOutputSize( QSize( 100, 100 ) );
      mapSettings.setExtent( QgsRectangle( 0, 0, 1, 1 ) );
      QVERIFY( mapSettings.hasValidSettings() );

      QgsSnappingUtils u;
      QgsSnappingConfig snappingConfig = u.config();
      u.setMapSettings( mapSettings );
      snappingConfig.setMode( QgsSnappingConfig::AllLayers );
      u.setConfig( snappingConfig );

      // right now there are no layers in map settings - snapping will fail

      QgsPointLocator::Match m = u.snapToMap( QPoint( 100, 100 ) );
      QVERIFY( !m.isValid() );

      // now check with our layer
      mapSettings.setLayers( QStringList() << mVL->id() );
      u.setMapSettings( mapSettings );

      QgsPointLocator::Match m2 = u.snapToMap( QPoint( 100, 100 ) );
      QVERIFY( m2.isValid() );
      QCOMPARE( m2.point(), QgsPoint( 1, 0 ) );
    }

 void testNearestVertex()
 {
   QgsPointLocator loc( mVL );
   QgsPointXY pt( 2, 2 );
   QgsPointLocator::Match m = loc.nearestVertex( pt, 999 );
   QVERIFY( m.isValid() );
   QVERIFY( m.hasVertex() );
   QCOMPARE( m.layer(), mVL );
   QCOMPARE( m.featureId(), ( QgsFeatureId )1 );
   QCOMPARE( m.point(), QgsPointXY( 1, 1 ) );
   QCOMPARE( m.distance(), std::sqrt( 2.0 ) );
   QCOMPARE( m.vertexIndex(), 2 );
 }

    void testSnapOnIntersection()
    {
      // testing with a layer with two crossing linestrings
      // (0,1)  x  x (1,1)
      //         \/
      //         /\    .
      // (0,0)  x  x (1,0)
      QgsVectorLayer* vl = new QgsVectorLayer( QStringLiteral( "LineString" ), QStringLiteral( "x" ), QStringLiteral( "memory" ) );
      QgsPolyline polyline1, polyline2;
      polyline1 << QgsPoint( 0, 0 ) << QgsPoint( 1, 1 );
      polyline2 << QgsPoint( 1, 0 ) << QgsPoint( 0, 1 );
      QgsFeature f1;
      QgsGeometry f1g = QgsGeometry::fromPolyline( polyline1 ) ;
      f1.setGeometry( f1g );
      QgsFeature f2;
      QgsGeometry f2g = QgsGeometry::fromPolyline( polyline2 );
      f2.setGeometry( f2g );
      QgsFeatureList flist;
      flist << f1 << f2;
      vl->dataProvider()->addFeatures( flist );

      QVERIFY( vl->dataProvider()->featureCount() == 2 );

      QgsMapSettings mapSettings;
      mapSettings.setOutputSize( QSize( 100, 100 ) );
      mapSettings.setExtent( QgsRectangle( 0, 0, 1, 1 ) );
      QVERIFY( mapSettings.hasValidSettings() );

      QgsSnappingUtils u;
      u.setMapSettings( mapSettings );
      QgsSnappingConfig snappingConfig = u.config();
      snappingConfig.setMode( QgsSnappingConfig::AdvancedConfiguration );
      QgsSnappingConfig::IndividualLayerSettings layerSettings( true, QgsSnappingConfig::Vertex, 0.1, QgsTolerance::ProjectUnits );
      snappingConfig.setIndividualLayerSettings( vl, layerSettings );
      u.setConfig( snappingConfig );

      // no snapping on intersections by default - should find nothing
      QgsPointLocator::Match m = u.snapToMap( QgsPoint( 0.45, 0.5 ) );
      QVERIFY( !m.isValid() );

      snappingConfig.setIntersectionSnapping( true );
      u.setConfig( snappingConfig );

      QgsPointLocator::Match m2 = u.snapToMap( QgsPoint( 0.45, 0.5 ) );
      QVERIFY( m2.isValid() );
      QCOMPARE( m2.type(), QgsPointLocator::Vertex );
      QCOMPARE( m2.point(), QgsPoint( 0.5, 0.5 ) );

      delete vl;
    }

    void testPointInPolygon()
    {
      QgsPointLocator loc( mVL );
      QgsPointLocator::MatchList mValid = loc.pointInPolygon( QgsPointXY( 0.8, 0.8 ) );
      QCOMPARE( mValid.count(), 1 );
      QgsPointLocator::Match m = mValid[0];
      QVERIFY( m.isValid() );
      QVERIFY( m.hasArea() );
      QCOMPARE( m.layer(), mVL );
      QCOMPARE( m.featureId(), ( QgsFeatureId )1 );

      QgsPointLocator::MatchList mInvalid = loc.pointInPolygon( QgsPointXY( 0, 0 ) );
      QCOMPARE( mInvalid.count(), 0 );
    }

QList<QgsPoint> QgsMapMouseEvent::snapSegment( SnappingMode snappingMode, bool* snapped , bool allLayers ) const
{
  QList<QgsPoint> segment;
  QgsPoint pt1, pt2;

  // If there's a cached snapping result we use it
  if ( snappingMode == mSnappingMode && mSnapMatch.hasEdge() )
  {
    mSnapMatch.edgePoints( pt1, pt2 );
    segment << pt1 << pt2;
  }

  else if ( snappingMode != NoSnapping )
  {
    QgsPointLocator::Match match;
    if ( snappingMode == SnapProjectConfig && !allLayers )
    {
      // run snapToMap with only segments
      EdgesOnlyFilter filter;
      match = mMapCanvas->snappingUtils()->snapToMap( mOriginalMapPoint, &filter );
    }
    else if ( snappingMode == SnapAllLayers || allLayers )
    {
      // run snapToMap with only edges on all layers
      QgsSnappingUtils* snappingUtils = mMapCanvas->snappingUtils();
      QgsSnappingUtils::SnapToMapMode canvasMode = snappingUtils->snapToMapMode();
      int type;
      double tolerance;
      QgsTolerance::UnitType unit;
      snappingUtils->defaultSettings( type, tolerance, unit );
      snappingUtils->setSnapToMapMode( QgsSnappingUtils::SnapAllLayers );
      snappingUtils->setDefaultSettings( QgsPointLocator::Edge, tolerance, unit );
      match = snappingUtils->snapToMap( mOriginalMapPoint );
      snappingUtils->setSnapToMapMode( canvasMode );
      snappingUtils->setDefaultSettings( type, tolerance, unit );
    }
    if ( match.isValid() && match.hasEdge() )
    {
      match.edgePoints( pt1, pt2 );
      segment << pt1 << pt2;
    }
  }

  if ( snapped )
  {
    *snapped = segment.count() == 2;
  }

  return segment;
}

    void testSnapModeCurrent()
    {
      QgsMapSettings mapSettings;
      mapSettings.setOutputSize( QSize( 100, 100 ) );
      mapSettings.setExtent( QgsRectangle( 0, 0, 1, 1 ) );
      QVERIFY( mapSettings.hasValidSettings() );

      QgsSnappingUtils u;
      u.setMapSettings( mapSettings );
      u.setCurrentLayer( mVL );

      // first try with no snapping enabled
      QgsSnappingConfig snappingConfig = u.config();
      snappingConfig.setEnabled( false );
      snappingConfig.setTolerance( 10 );
      snappingConfig.setUnits( QgsTolerance::Pixels );
      snappingConfig.setMode( QgsSnappingConfig::ActiveLayer );
      u.setConfig( snappingConfig );

      QgsPointLocator::Match m0 = u.snapToMap( QPoint( 100, 100 ) );
      QVERIFY( !m0.isValid() );
      QVERIFY( !m0.hasVertex() );

      // now enable snapping
      snappingConfig.setEnabled( true );
      snappingConfig.setType( QgsSnappingConfig::Vertex );
      u.setConfig( snappingConfig );

      QgsPointLocator::Match m = u.snapToMap( QPoint( 100, 100 ) );
      QVERIFY( m.isValid() );
      QVERIFY( m.hasVertex() );
      QCOMPARE( m.point(), QgsPoint( 1, 0 ) );

      QgsPointLocator::Match m2 = u.snapToMap( QPoint( 0, 100 ) );
      QVERIFY( !m2.isValid() );
      QVERIFY( !m2.hasVertex() );

      // do not consider edges in the following test - on 32-bit platforms
      // result was an edge match very close to (1,0) instead of being exactly (1,0)

      snappingConfig.setType( QgsSnappingConfig::Vertex );
      u.setConfig( snappingConfig );

      // test with filtering
      FilterExcludePoint myFilter( QgsPoint( 1, 0 ) );
      QgsPointLocator::Match m3 = u.snapToMap( QPoint( 100, 100 ), &myFilter );
      QVERIFY( !m3.isValid() );
    }

 void testNearestEdge()
 {
   QgsPointLocator loc( mVL );
   QgsPointXY pt( 1.1, 0.5 );
   QgsPointLocator::Match m = loc.nearestEdge( pt, 999 );
   QVERIFY( m.isValid() );
   QVERIFY( m.hasEdge() );
   QCOMPARE( m.layer(), mVL );
   QCOMPARE( m.featureId(), ( QgsFeatureId )1 );
   QCOMPARE( m.point(), QgsPointXY( 1, 0.5 ) );
   QCOMPARE( m.distance(), 0.1 );
   QCOMPARE( m.vertexIndex(), 1 );
   QgsPointXY pt1, pt2;
   m.edgePoints( pt1, pt2 );
   QCOMPARE( pt1, QgsPointXY( 1, 0 ) );
   QCOMPARE( pt2, QgsPointXY( 1, 1 ) );
 }

int QgsMapToolCapture::fetchLayerPoint( const QgsPointLocator::Match &match, QgsPoint &layerPoint )
{
  QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mCanvas->currentLayer() );
  QgsVectorLayer *sourceLayer = match.layer();
  if ( match.isValid() && match.hasVertex() && sourceLayer &&
       ( sourceLayer->crs() == vlayer->crs() ) )
  {
    QgsFeature f;
    QgsFeatureRequest request;
    request.setFilterFid( match.featureId() );
    bool fetched = match.layer()->getFeatures( request ).nextFeature( f );
    if ( fetched )
    {
      QgsVertexId vId;
      if ( !f.geometry().vertexIdFromVertexNr( match.vertexIndex(), vId ) )
        return 2;

      layerPoint = f.geometry().constGet()->vertexAt( vId );

      // ZM support depends on the target layer
      if ( !QgsWkbTypes::hasZ( vlayer->wkbType() ) )
      {
        layerPoint.dropZValue();
      }

      if ( !QgsWkbTypes::hasM( vlayer->wkbType() ) )
      {
        layerPoint.dropMValue();
      }

      return 0;
    }
    else
    {
      return 2;
    }
  }
  else
  {
    return 1;
  }
}

    void testSnapModeAdvanced()
    {
      QgsMapSettings mapSettings;
      mapSettings.setOutputSize( QSize( 100, 100 ) );
      mapSettings.setExtent( QgsRectangle( 0, 0, 1, 1 ) );
      QVERIFY( mapSettings.hasValidSettings() );

      QgsSnappingUtils u;
      QgsSnappingConfig snappingConfig = u.config();
      u.setMapSettings( mapSettings );
      snappingConfig.setMode( QgsSnappingConfig::AdvancedConfiguration );
      snappingConfig.setIndividualLayerSettings( mVL, QgsSnappingConfig::IndividualLayerSettings( true, QgsSnappingConfig::Vertex, 10, QgsTolerance::Pixels ) );
      u.setConfig( snappingConfig );

      QgsPointLocator::Match m = u.snapToMap( QPoint( 100, 100 ) );
      QVERIFY( m.isValid() );
      QVERIFY( m.hasVertex() );
      QCOMPARE( m.point(), QgsPoint( 1, 0 ) );

      // test with filtering
      FilterExcludePoint myFilter( QgsPoint( 1, 0 ) );
      QgsPointLocator::Match m2 = u.snapToMap( QPoint( 100, 100 ), &myFilter );
      QVERIFY( !m2.isValid() );
    }

    void testSnapModeAdvanced()
    {
      QgsMapSettings mapSettings;
      mapSettings.setOutputSize( QSize( 100, 100 ) );
      mapSettings.setExtent( QgsRectangle( 0, 0, 1, 1 ) );
      QVERIFY( mapSettings.hasValidSettings() );

      QgsSnappingUtils u;
      u.setMapSettings( mapSettings );
      u.setSnapToMapMode( QgsSnappingUtils::SnapAdvanced );
      QList<QgsSnappingUtils::LayerConfig> layers;
      layers << QgsSnappingUtils::LayerConfig( mVL, QgsPointLocator::Vertex, 10, QgsTolerance::Pixels );
      u.setLayers( layers );

      QgsPointLocator::Match m = u.snapToMap( QPoint( 100, 100 ) );
      QVERIFY( m.isValid() );
      QVERIFY( m.hasVertex() );
      QCOMPARE( m.point(), QgsPoint( 1, 0 ) );

      // test with filtering
      FilterExcludePoint myFilter( QgsPoint( 1, 0 ) );
      QgsPointLocator::Match m2 = u.snapToMap( QPoint( 100, 100 ), &myFilter );
      QVERIFY( !m2.isValid() );
    }