C++ iterator::get方法代码示例

void 
Map::removeImageLayer( ImageLayer* layer )
{
    osgEarth::Registry::instance()->clearBlacklist();
    unsigned int index = -1;

    osg::ref_ptr<ImageLayer> layerToRemove = layer;
    Revision newRevision;

    if ( layerToRemove.get() )
    {
        Threading::ScopedWriteLock lock( _mapDataMutex );
        index = 0;
        for( ImageLayerVector::iterator i = _imageLayers.begin(); i != _imageLayers.end(); i++, index++ )
        {
            if ( i->get() == layerToRemove.get() )
            {
                _imageLayers.erase( i );
                newRevision = ++_dataModelRevision;
                break;
            }
        }
    }

    // a separate block b/c we don't need the mutex
    if ( newRevision >= 0 ) // layerToRemove.get() )
    {
        for( MapCallbackList::iterator i = _mapCallbacks.begin(); i != _mapCallbacks.end(); i++ )
        {
            i->get()->onMapModelChanged( MapModelChange(
                MapModelChange::REMOVE_IMAGE_LAYER, newRevision, layerToRemove.get(), index) );
            //i->get()->onImageLayerRemoved( layerToRemove.get(), index, newRevision );
        }
    }
}

void
Map::setCache( Cache* cache )
{
    if (_cache.get() != cache)
    {
        _cache = cache;

        if ( _cache.valid() )
        {
            _cache->store( _dbOptions.get() );
        }

        // Propagate the cache to any of our layers
        for (ImageLayerVector::iterator i = _imageLayers.begin(); i != _imageLayers.end(); ++i)
        {
            i->get()->setDBOptions( _dbOptions.get() );
            //i->get()->setCache( _cache.get() );
        }

        for (ElevationLayerVector::iterator i = _elevationLayers.begin(); i != _elevationLayers.end(); ++i)
        {
            i->get()->setDBOptions( _dbOptions.get() );
            //i->get()->setCache( _cache.get() );
        }
    }
}

void
Map::setCache( Cache* cache )
{
    if (_cache.get() != cache)
    {
        _cache = cache;
        _cache->setReferenceURI( _mapOptions.referenceURI().value() );

        //Propagate the cache to any of our layers
        for (ImageLayerVector::iterator i = _imageLayers.begin(); i != _imageLayers.end(); ++i)
        {
            i->get()->setCache( _cache.get() );
        }

        for (ElevationLayerVector::iterator i = _elevationLayers.begin(); i != _elevationLayers.end(); ++i)
        {
            i->get()->setCache( _cache.get() );
        }
    }
}

void
Map::setLayersFromMap( const Map* map )
{
    this->clear();

    if ( map )
    {
        ImageLayerVector newImages;
        map->getImageLayers( newImages );
        for( ImageLayerVector::iterator i = newImages.begin(); i != newImages.end(); ++i )
            addImageLayer( i->get() );

        ElevationLayerVector newElev;
        map->getElevationLayers( newElev );
        for( ElevationLayerVector::iterator i = newElev.begin(); i != newElev.end(); ++i )
            addElevationLayer( i->get() );

        ModelLayerVector newModels;
        map->getModelLayers( newModels );
        for( ModelLayerVector::iterator i = newModels.begin(); i != newModels.end(); ++i )
            addModelLayer( i->get() );
    }
}

void
RexTerrainEngineNode::postInitialize( const Map* map, const TerrainOptions& options )
{
    TerrainEngineNode::postInitialize( map, options );

    // Initialize the map frames. We need one for the update thread and one for the
    // cull thread. Someday we can detect whether these are actually the same thread
    // (depends on the viewer's threading mode).
    _update_mapf = new MapFrame( map, Map::ENTIRE_MODEL );

    // merge in the custom options:
    _terrainOptions.merge( options );

    // morphing imagery LODs requires we bind parent textures to their own unit.
    if ( _terrainOptions.morphImagery() == true )
    {
        _requireParentTextures = true;
    }

    // if the envvar for tile expiration is set, overide the options setting
    const char* val = ::getenv("OSGEARTH_EXPIRATION_THRESHOLD");
    if ( val )
    {
        _terrainOptions.expirationThreshold() = as<unsigned>(val, _terrainOptions.expirationThreshold().get());
        OE_INFO << LC << "Expiration threshold set by env var = " << _terrainOptions.expirationThreshold().get() << "\n";
    }

    // if the envvar for hires prioritization is set, override the options setting
    const char* hiresFirst = ::getenv("OSGEARTH_HIGH_RES_FIRST");
    if ( hiresFirst )
    {
        _terrainOptions.highResolutionFirst() = true;
    }

    // check for normal map generation (required for lighting).
    if ( _terrainOptions.normalMaps() == true )
    {
        this->_requireNormalTextures = true;
    }

    // A shared registry for tile nodes in the scene graph. Enable revision tracking
    // if requested in the options. Revision tracking lets the registry notify all
    // live tiles of the current map revision so they can inrementally update
    // themselves if necessary.
    _liveTiles = new TileNodeRegistry("live");
    _liveTiles->setMapRevision( _update_mapf->getRevision() );

    if ( _terrainOptions.quickReleaseGLObjects() == true )
    {
        _deadTiles = new TileNodeRegistry("dead");
        _quickReleaseInstalled = false;
        ADJUST_UPDATE_TRAV_COUNT( this, +1 );
    }

    // A shared geometry pool.
    if ( ::getenv("OSGEARTH_REX_NO_POOL") == 0L )
    {
        _geometryPool = new GeometryPool( _terrainOptions );
    }

    // Make a tile loader
    PagerLoader* loader = new PagerLoader( this );
    loader->setMergesPerFrame( _terrainOptions.mergesPerFrame().get() );

    _loader = loader;
    //_loader = new SimpleLoader();
    this->addChild( _loader.get() );
    
    // handle an already-established map profile:
    MapInfo mapInfo( map );
    if ( _update_mapf->getProfile() )
    {
        // NOTE: this will initialize the map with the startup layers
        onMapInfoEstablished( mapInfo );
    }

    // install a layer callback for processing further map actions:
    map->addMapCallback( new RexTerrainEngineNodeMapCallbackProxy(this) );

    // Prime with existing layers:
    _batchUpdateInProgress = true;

    ElevationLayerVector elevationLayers;
    map->getElevationLayers( elevationLayers );
    for( ElevationLayerVector::const_iterator i = elevationLayers.begin(); i != elevationLayers.end(); ++i )
        addElevationLayer( i->get() );

    ImageLayerVector imageLayers;
    map->getImageLayers( imageLayers );
    for( ImageLayerVector::iterator i = imageLayers.begin(); i != imageLayers.end(); ++i )
        addImageLayer( i->get() );

    _batchUpdateInProgress = false;

    // set up the initial shaders
    updateState();

    // register this instance to the osgDB plugin can find it.
    registerEngine( this );

//.........这里部分代码省略.........

void
MapNodeHelper::parse(MapNode*             mapNode,
                     osg::ArgumentParser& args,
                     osgViewer::View*     view,
                     osg::Group*          root,
                     Container*           userContainer ) const
{
    if ( !root )
        root = mapNode;

    // options to use for the load
    osg::ref_ptr<osgDB::Options> dbOptions = Registry::instance()->cloneOrCreateOptions();

    // parse out custom example arguments first:
    bool useMGRS       = args.read("--mgrs");
    bool useDMS        = args.read("--dms");
    bool useDD         = args.read("--dd");
    bool useCoords     = args.read("--coords") || useMGRS || useDMS || useDD;

    bool useAutoClip   = args.read("--autoclip");
    bool animateSky    = args.read("--animate-sky");
    bool showActivity  = args.read("--activity");
    bool useLogDepth   = args.read("--logdepth");
    bool useLogDepth2  = args.read("--logdepth2");
    bool kmlUI         = args.read("--kmlui");

    if (args.read("--verbose"))
        osgEarth::setNotifyLevel(osg::INFO);
    
    if (args.read("--quiet"))
        osgEarth::setNotifyLevel(osg::FATAL);

    float ambientBrightness = 0.2f;
    args.read("--ambientBrightness", ambientBrightness);

    std::string kmlFile;
    args.read( "--kml", kmlFile );

    std::string imageFolder;
    args.read( "--images", imageFolder );

    std::string imageExtensions;
    args.read("--image-extensions", imageExtensions);
    
    // animation path:
    std::string animpath;
    if ( args.read("--path", animpath) )
    {
        view->setCameraManipulator( new osgGA::AnimationPathManipulator(animpath) );
    }

    // Install a new Canvas for our UI controls, or use one that already exists.
    ControlCanvas* canvas = ControlCanvas::getOrCreate( view );

    Container* mainContainer;
    if ( userContainer )
    {
        mainContainer = userContainer;
    }
    else
    {
        mainContainer = new VBox();
        mainContainer->setAbsorbEvents( true );
        mainContainer->setBackColor( Color(Color::Black, 0.8) );
        mainContainer->setHorizAlign( Control::ALIGN_LEFT );
        mainContainer->setVertAlign( Control::ALIGN_BOTTOM );
    }
    canvas->addControl( mainContainer );

    // Add an event handler to toggle the canvas with a key press;
    view->addEventHandler(new ToggleCanvasEventHandler(canvas) );




    // look for external data in the map node:
    const Config& externals = mapNode->externalConfig();

    //const Config& screenSpaceLayoutConf = 
    //    externals.hasChild("screen_space_layout") ? externals.child("screen_space_layout") :
    //    externals.child("decluttering"); // backwards-compatibility


    // some terrain effects.
    // TODO: Most of these are likely to move into extensions.
    const Config& lodBlendingConf = externals.child("lod_blending");
    const Config& vertScaleConf   = externals.child("vertical_scale");

    // Shadowing.
    if (args.read("--shadows"))
    {
        int unit;
        if ( mapNode->getTerrainEngine()->getResources()->reserveTextureImageUnit(unit, "ShadowCaster") )
        {
            ShadowCaster* caster = new ShadowCaster();
            caster->setTextureImageUnit( unit );
            caster->setLight( view->getLight() );
            caster->getShadowCastingGroup()->addChild( mapNode );
            if ( mapNode->getNumParents() > 0 )
            {
//.........这里部分代码省略.........

void
MPTerrainEngineNode::postInitialize( const Map* map, const TerrainOptions& options )
{
    TerrainEngineNode::postInitialize( map, options );

    // Initialize the map frames. We need one for the update thread and one for the
    // cull thread. Someday we can detect whether these are actually the same thread
    // (depends on the viewer's threading mode).
    _update_mapf = new MapFrame( map, Map::MASKED_TERRAIN_LAYERS, "mp-update" );

    // merge in the custom options:
    _terrainOptions.merge( options );

    // A shared registry for tile nodes in the scene graph. Enable revision tracking
    // if requested in the options. Revision tracking lets the registry notify all
    // live tiles of the current map revision so they can inrementally update
    // themselves if necessary.
    _liveTiles = new TileNodeRegistry("live");
    _liveTiles->setRevisioningEnabled( _terrainOptions.incrementalUpdate() == true );
    _liveTiles->setMapRevision( _update_mapf->getRevision() );

    // set up a registry for quick release:
    if ( _terrainOptions.quickReleaseGLObjects() == true )
    {
        _deadTiles = new TileNodeRegistry("dead");
    }
    
    // initialize the model factory:
    _tileModelFactory = new TileModelFactory(_liveTiles.get(), _terrainOptions );

    // handle an already-established map profile:
    if ( _update_mapf->getProfile() )
    {
        // NOTE: this will initialize the map with the startup layers
        onMapInfoEstablished( MapInfo(map) );
    }

    // install a layer callback for processing further map actions:
    map->addMapCallback( new MPTerrainEngineNodeMapCallbackProxy(this) );

    // Prime with existing layers:
    _batchUpdateInProgress = true;

    ElevationLayerVector elevationLayers;
    map->getElevationLayers( elevationLayers );
    for( ElevationLayerVector::const_iterator i = elevationLayers.begin(); i != elevationLayers.end(); ++i )
        addElevationLayer( i->get() );

    ImageLayerVector imageLayers;
    map->getImageLayers( imageLayers );
    for( ImageLayerVector::iterator i = imageLayers.begin(); i != imageLayers.end(); ++i )
        addImageLayer( i->get() );

    _batchUpdateInProgress = false;

    // install some terrain-wide uniforms
    this->getOrCreateStateSet()->getOrCreateUniform(
        "oe_min_tile_range_factor",
        osg::Uniform::FLOAT)->set( *_terrainOptions.minTileRangeFactor() );

    // set up the initial shaders
    updateState();

    // register this instance to the osgDB plugin can find it.
    registerEngine( this );

    // now that we have a map, set up to recompute the bounds
    dirtyBound();

    OE_INFO << LC << "Edge normalization is " << (_terrainOptions.normalizeEdges() == true? "ON" : "OFF") << std::endl;
}

void
Map::calculateProfile()
{
    if ( !_profile.valid() )
    {
        osg::ref_ptr<const Profile> userProfile;
        if ( _mapOptions.profile().isSet() )
        {
            userProfile = Profile::create( _mapOptions.profile().value() );
        }

        if ( _mapOptions.coordSysType() == MapOptions::CSTYPE_GEOCENTRIC )
        {
            if ( userProfile.valid() )
            {
                if ( userProfile->isOK() && userProfile->getSRS()->isGeographic() )
                {
                    _profile = userProfile.get();
                }
                else
                {
                    OE_WARN << LC 
                        << "Map is geocentric, but the configured profile SRS ("
                        << userProfile->getSRS()->getName() << ") is not geographic; "
                        << "it will be ignored."
                        << std::endl;
                }
            }

            if ( !_profile.valid() )
            {
                // by default, set a geocentric map to use global-geodetic WGS84.
                _profile = osgEarth::Registry::instance()->getGlobalGeodeticProfile();
            }
        }

        else if ( _mapOptions.coordSysType() == MapOptions::CSTYPE_GEOCENTRIC_CUBE )
        {
            //If the map type is a Geocentric Cube, set the profile to the cube profile.
            _profile = osgEarth::Registry::instance()->getCubeProfile();
        }

        else // CSTYPE_PROJECTED
        {
            if ( userProfile.valid() )
            {
                _profile = userProfile.get();
            }
        }

        // At this point, if we don't have a profile we need to search tile sources until we find one.
        if ( !_profile.valid() )
        {
            Threading::ScopedReadLock lock( _mapDataMutex );

            for( ImageLayerVector::iterator i = _imageLayers.begin(); i != _imageLayers.end() && !_profile.valid(); i++ )
            {
                ImageLayer* layer = i->get();
                if ( layer->getTileSource() )
                {
                    _profile = layer->getTileSource()->getProfile();
                }
            }

            for( ElevationLayerVector::iterator i = _elevationLayers.begin(); i != _elevationLayers.end() && !_profile.valid(); i++ )
            {
                ElevationLayer* layer = i->get();
                if ( layer->getTileSource() )
                {
                    _profile = layer->getTileSource()->getProfile();
                }
            }
        }

        // convert the profile to Plate Carre if necessary.
        if (_profile.valid() &&
            _profile->getSRS()->isGeographic() && 
            getMapOptions().coordSysType() == MapOptions::CSTYPE_PROJECTED )
        {
            OE_INFO << LC << "Projected display with geographic SRS; activating Plate Carre mode" << std::endl;
            _profile = _profile->overrideSRS( _profile->getSRS()->createPlateCarreGeographicSRS() );
        }

        // finally, fire an event if the profile has been set.
        if ( _profile.valid() )
        {
            OE_INFO << LC << "Map profile is: " << _profile->toString() << std::endl;

            for( MapCallbackList::iterator i = _mapCallbacks.begin(); i != _mapCallbacks.end(); i++ )
            {
                i->get()->onMapInfoEstablished( MapInfo(this) );
            }
        }

        else
        {
            OE_WARN << LC << "Warning, not yet able to establish a map profile!" << std::endl;
        }
    }

//.........这里部分代码省略.........

void
MapNodeHelper::parse(MapNode*             mapNode,
                     osg::ArgumentParser& args,
                     osgViewer::View*     view,
                     osg::Group*          root,
                     Control*             userControl ) const
{
    if ( !root )
        root = mapNode;

    // options to use for the load
    osg::ref_ptr<osgDB::Options> dbOptions = Registry::instance()->cloneOrCreateOptions();

    // parse out custom example arguments first:
    bool useSky        = args.read("--sky");
    bool useOcean      = args.read("--ocean");
    bool useMGRS       = args.read("--mgrs");
    bool useDMS        = args.read("--dms");
    bool useDD         = args.read("--dd");
    bool useCoords     = args.read("--coords") || useMGRS || useDMS || useDD;
    bool useOrtho      = args.read("--ortho");
    bool useAutoClip   = args.read("--autoclip");
    bool useShadows    = args.read("--shadows");
    bool animateSky    = args.read("--animate-sky");
    bool showActivity  = args.read("--activity");
    bool useLogDepth   = args.read("--logdepth");
    bool useLogDepth2  = args.read("--logdepth2");
    bool kmlUI         = args.read("--kmlui");

    if (args.read("--verbose"))
        osgEarth::setNotifyLevel(osg::INFO);
    
    if (args.read("--quiet"))
        osgEarth::setNotifyLevel(osg::FATAL);

    float ambientBrightness = 0.2f;
    args.read("--ambientBrightness", ambientBrightness);

    std::string kmlFile;
    args.read( "--kml", kmlFile );

    std::string imageFolder;
    args.read( "--images", imageFolder );

    std::string imageExtensions;
    args.read("--image-extensions", imageExtensions);
    
    // animation path:
    std::string animpath;
    if ( args.read("--path", animpath) )
    {
        view->setCameraManipulator( new osgGA::AnimationPathManipulator(animpath) );
    }

    // Install a new Canvas for our UI controls, or use one that already exists.
    ControlCanvas* canvas = ControlCanvas::getOrCreate( view );

    Container* mainContainer = canvas->addControl( new VBox() );
    mainContainer->setAbsorbEvents( true );
    mainContainer->setBackColor( Color(Color::Black, 0.8) );
    mainContainer->setHorizAlign( Control::ALIGN_LEFT );
    mainContainer->setVertAlign( Control::ALIGN_BOTTOM );

    // install the user control:
    if ( userControl )
        mainContainer->addControl( userControl );

    // look for external data in the map node:
    const Config& externals = mapNode->externalConfig();

    const Config& skyConf         = externals.child("sky");
    const Config& oceanConf       = externals.child("ocean");
    const Config& annoConf        = externals.child("annotations");
    const Config& declutterConf   = externals.child("decluttering");

    // some terrain effects.
    // TODO: Most of these are likely to move into extensions.
    const Config& lodBlendingConf = externals.child("lod_blending");
    const Config& vertScaleConf   = externals.child("vertical_scale");
    const Config& contourMapConf  = externals.child("contour_map");

    // Adding a sky model:
    if ( useSky || !skyConf.empty() )
    {
        SkyOptions options(skyConf);
        if ( options.getDriver().empty() )
        {
            if ( mapNode->getMapSRS()->isGeographic() )
                options.setDriver("simple");
            else
                options.setDriver("gl");
        }

        SkyNode* sky = SkyNode::create(options, mapNode);
        if ( sky )
        {
            sky->attach( view, 0 );
            if ( mapNode->getNumParents() > 0 )
            {
                osgEarth::insertGroup(sky, mapNode->getParent(0));
//.........这里部分代码省略.........

/** Packages an image layer as a TMS folder. */
int
makeTMS( osg::ArgumentParser& args )
{
    // see if the user wants to override the type extension (imagery only)
    std::string extension = "png";
    args.read( "--ext", extension );

    // verbosity?
    bool verbose = !args.read( "--quiet" );

    // find a .earth file on the command line
    std::string earthFile = findArgumentWithExtension(args, ".earth");
    if ( earthFile.empty() )
        return usage( "Missing required .earth file" );

    // folder to which to write the TMS archive.
    std::string rootFolder;
    if ( !args.read( "--out", rootFolder ) )
        rootFolder = Stringify() << earthFile << ".tms_repo";

    // max level to which to generate
    unsigned maxLevel = ~0;
    args.read( "--max-level", maxLevel );

    // load up the map
    osg::ref_ptr<MapNode> mapNode = MapNode::load( args );
    if ( !mapNode.valid() )
        return usage( "Failed to load a valid .earth file" );

    // create a folder for the output
    osgDB::makeDirectory(rootFolder);
    if ( !osgDB::fileExists(rootFolder) )
        return usage("Failed to create root output folder" );

    Map* map = mapNode->getMap();

    // fire up a packager:
    TMSPackager packager( map->getProfile() );
    packager.setVerbose( verbose );
    if ( maxLevel != ~0 )
        packager.setMaxLevel( maxLevel );
    

    // package any image layers that are enabled:
    ImageLayerVector imageLayers;
    map->getImageLayers( imageLayers );

    unsigned counter = 0;
    
    for( ImageLayerVector::iterator i = imageLayers.begin(); i != imageLayers.end(); ++i, ++counter )
    {
        ImageLayer* layer = i->get();
        if ( layer->getImageLayerOptions().enabled() == true )
        {
            std::string layerFolder = toLegalFileName( layer->getName() );
            if ( layerFolder.empty() )
                layerFolder = Stringify() << "image_layer_" << counter;

            if ( verbose )
            {
                OE_NOTICE << LC << "Packaging image layer \"" << layerFolder << "\"" << std::endl;
            }

            std::string layerRoot = osgDB::concatPaths( rootFolder, layerFolder );
            TMSPackager::Result r = packager.package( layer, layerRoot, extension );
            if ( !r.ok )
            {
                OE_WARN << LC << r.message << std::endl;
            }
        }
        else if ( verbose )
        {
            OE_NOTICE << LC << "Skipping disabled layer \"" << layer->getName() << "\"" << std::endl;
        }
    }

    // package any elevation layers that are enabled:
    counter = 0;
    ElevationLayerVector elevationLayers;
    map->getElevationLayers( elevationLayers );

    for( ElevationLayerVector::iterator i = elevationLayers.begin(); i != elevationLayers.end(); ++i, ++counter )
    {
        ElevationLayer* layer = i->get();
        if ( layer->getElevationLayerOptions().enabled() == true )
        {
            std::string layerFolder = toLegalFileName( layer->getName() );
            if ( layerFolder.empty() )
                layerFolder = Stringify() << "elevation_layer_" << counter;

            if ( verbose )
            {
                OE_NOTICE << LC << "Packaging elevation layer \"" << layerFolder << "\"" << std::endl;
            }

            std::string layerRoot = osgDB::concatPaths( rootFolder, layerFolder );
            packager.package( layer, layerRoot );
        }
        else if ( verbose )
//.........这里部分代码省略.........

void
MPTerrainEngineNode::postInitialize( const Map* map, const TerrainOptions& options )
{
    TerrainEngineNode::postInitialize( map, options );

    // Initialize the map frames. We need one for the update thread and one for the
    // cull thread. Someday we can detect whether these are actually the same thread
    // (depends on the viewer's threading mode).
    _update_mapf = new MapFrame( map, Map::MASKED_TERRAIN_LAYERS, "mp-update" );

    // merge in the custom options:
    _terrainOptions.merge( options );

    // a shared registry for tile nodes in the scene graph.
    _liveTiles = new TileNodeRegistry("live");

    // set up a registry for quick release:
    if ( _terrainOptions.quickReleaseGLObjects() == true )
    {
        _deadTiles = new TileNodeRegistry("dead");
    }
    
    // initialize the model factory:
    _tileModelFactory = new TileModelFactory(getMap(), _liveTiles.get(), _terrainOptions );


    // handle an already-established map profile:
    if ( _update_mapf->getProfile() )
    {
        // NOTE: this will initialize the map with the startup layers
        onMapInfoEstablished( MapInfo(map) );
    }

    // populate the terrain with whatever data is in the map to begin with:
    if ( _terrain )
    {
        // reserve a GPU image unit and two attribute indexes.
        this->getTextureCompositor()->reserveTextureImageUnit( _primaryUnit );
        this->getTextureCompositor()->reserveTextureImageUnit( _secondaryUnit );

        //this->getTextureCompositor()->reserveAttribIndex( _attribIndex1 );
        //this->getTextureCompositor()->reserveAttribIndex( _attribIndex2 );
    }

    // install a layer callback for processing further map actions:
    map->addMapCallback( new MPTerrainEngineNodeMapCallbackProxy(this) );

    // Prime with existing layers:
    _batchUpdateInProgress = true;

    ElevationLayerVector elevationLayers;
    map->getElevationLayers( elevationLayers );
    for( ElevationLayerVector::const_iterator i = elevationLayers.begin(); i != elevationLayers.end(); ++i )
        addElevationLayer( i->get() );

    ImageLayerVector imageLayers;
    map->getImageLayers( imageLayers );
    for( ImageLayerVector::iterator i = imageLayers.begin(); i != imageLayers.end(); ++i )
        addImageLayer( i->get() );

    _batchUpdateInProgress = false;
    //{
    //    i->get()->addCallback( _elevationCallback.get() );
    //}

    // install some terrain-wide uniforms
    this->getOrCreateStateSet()->getOrCreateUniform(
        "oe_min_tile_range_factor",
        osg::Uniform::FLOAT)->set( *_terrainOptions.minTileRangeFactor() );

    // set up the initial shaders
    updateShaders();

    // register this instance to the osgDB plugin can find it.
    registerEngine( this );

    // now that we have a map, set up to recompute the bounds
    dirtyBound();
}

void
Map::calculateProfile()
{
    if ( !_profile.valid() )
    {
        osg::ref_ptr<const Profile> userProfile;
        if ( _mapOptions.profile().isSet() )
        {
            userProfile = Profile::create( _mapOptions.profile().value() );
        }

        if ( _mapOptions.coordSysType() == MapOptions::CSTYPE_GEOCENTRIC )
        {
            if ( userProfile.valid() )
            {
                if ( userProfile->isOK() && userProfile->getSRS()->isGeographic() )
                {
                    _profile = userProfile.get();
                }
                else
                {
                    OE_WARN << LC 
                        << "Map is geocentric, but the configured profile does not "
                        << "have a geographic SRS. Falling back on default.."
                        << std::endl;
                }
            }

            if ( !_profile.valid() )
            {
                // by default, set a geocentric map to use global-geodetic WGS84.
                _profile = osgEarth::Registry::instance()->getGlobalGeodeticProfile();
            }
        }

        else if ( _mapOptions.coordSysType() == MapOptions::CSTYPE_GEOCENTRIC_CUBE )
        {
            //If the map type is a Geocentric Cube, set the profile to the cube profile.
            _profile = osgEarth::Registry::instance()->getCubeProfile();
        }

        else // CSTYPE_PROJECTED
        {
            if ( userProfile.valid() )
            {
                _profile = userProfile.get();
            }
        }

        // At this point, if we don't have a profile we need to search tile sources until we find one.
        if ( !_profile.valid() )
        {
            Threading::ScopedReadLock lock( _mapDataMutex );

            for( ImageLayerVector::iterator i = _imageLayers.begin(); i != _imageLayers.end() && !_profile.valid(); i++ )
            {
                ImageLayer* layer = i->get();
                if ( layer->getTileSource() )
                {
                    _profile = layer->getTileSource()->getProfile();
                }
            }

            for( ElevationLayerVector::iterator i = _elevationLayers.begin(); i != _elevationLayers.end() && !_profile.valid(); i++ )
            {
                ElevationLayer* layer = i->get();
                if ( layer->getTileSource() )
                {
                    _profile = layer->getTileSource()->getProfile();
                }
            }
        }

        // finally, fire an event if the profile has been set.
        if ( _profile.valid() )
        {
            OE_INFO << LC << "Map profile is: " << _profile->toString() << std::endl;

            for( MapCallbackList::iterator i = _mapCallbacks.begin(); i != _mapCallbacks.end(); i++ )
            {
                i->get()->onMapInfoEstablished( MapInfo(this) );
            }
        }

        else
        {
            OE_WARN << LC << "Warning, not yet able to establish a map profile!" << std::endl;
        }
    }

    if ( _profile.valid() )
    {
        // tell all the loaded layers what the profile is, as a hint
        {
            Threading::ScopedWriteLock lock( _mapDataMutex );

            for( ImageLayerVector::iterator i = _imageLayers.begin(); i != _imageLayers.end(); i++ )
            {
                ImageLayer* layer = i->get();
                layer->setTargetProfileHint( _profile.get() );
//.........这里部分代码省略.........

void
MapNodeHelper::parse(MapNode*             mapNode,
                     osg::ArgumentParser& args,
                     osgViewer::View*     view,
                     osg::Group*          root,
                     Control*             userControl ) const
{
    // this is a dubious move.
    if ( !root )
        root = mapNode;

    // options to use for the load
    osg::ref_ptr<osgDB::Options> dbOptions = Registry::instance()->cloneOrCreateOptions();

    // parse out custom example arguments first:
    bool useSky        = args.read("--sky");
    bool useOcean      = args.read("--ocean");
    bool useMGRS       = args.read("--mgrs");
    bool useDMS        = args.read("--dms");
    bool useDD         = args.read("--dd");
    bool useCoords     = args.read("--coords") || useMGRS || useDMS || useDD;
    bool useOrtho      = args.read("--ortho");
    bool useAutoClip   = args.read("--autoclip");

    float ambientBrightness = 0.2f;
    args.read("--ambientBrightness", ambientBrightness);

    std::string kmlFile;
    args.read( "--kml", kmlFile );

    std::string imageFolder;
    args.read( "--images", imageFolder );

    std::string imageExtensions;
    args.read("--image-extensions", imageExtensions);

    // install a canvas for any UI controls we plan to create:
    ControlCanvas* canvas = ControlCanvas::get(view, false);

    Container* mainContainer = canvas->addControl( new VBox() );
    mainContainer->setAbsorbEvents( true );
    mainContainer->setBackColor( Color(Color::Black, 0.8) );
    mainContainer->setHorizAlign( Control::ALIGN_LEFT );
    mainContainer->setVertAlign( Control::ALIGN_BOTTOM );

    // install the user control:
    if ( userControl )
        mainContainer->addControl( userControl );

    // look for external data in the map node:
    const Config& externals = mapNode->externalConfig();

    const Config& skyConf         = externals.child("sky");
    const Config& oceanConf       = externals.child("ocean");
    const Config& annoConf        = externals.child("annotations");
    const Config& declutterConf   = externals.child("decluttering");
    Config        viewpointsConf  = externals.child("viewpoints");

    // some terrain effects.
    const Config& normalMapConf   = externals.child("normal_map");
    const Config& detailTexConf   = externals.child("detail_texture");
    const Config& lodBlendingConf = externals.child("lod_blending");
    const Config& vertScaleConf   = externals.child("vertical_scale");
    const Config& contourMapConf  = externals.child("contour_map");

    // backwards-compatibility: read viewpoints at the top level:
    const ConfigSet& old_viewpoints = externals.children("viewpoint");
    for( ConfigSet::const_iterator i = old_viewpoints.begin(); i != old_viewpoints.end(); ++i )
        viewpointsConf.add( *i );

    // Loading a viewpoint list from the earth file:
    if ( !viewpointsConf.empty() )
    {
        std::vector<Viewpoint> viewpoints;

        const ConfigSet& children = viewpointsConf.children();
        if ( children.size() > 0 )
        {
            for( ConfigSet::const_iterator i = children.begin(); i != children.end(); ++i )
            {
                viewpoints.push_back( Viewpoint(*i) );
            }
        }

        if ( viewpoints.size() > 0 )
        {
            Control* c = ViewpointControlFactory().create(viewpoints, view);
            if ( c )
                mainContainer->addControl( c );
        }
    }

    // Adding a sky model:
    if ( useSky || !skyConf.empty() )
    {
        double hours = skyConf.value( "hours", 12.0 );
        SkyNode* sky = new SkyNode( mapNode->getMap() );
        sky->setAmbientBrightness( ambientBrightness );
        sky->setDateTime( DateTime(2011, 3, 6, hours) );
        sky->attach( view );
//.........这里部分代码省略.........

void
MPTerrainEngineNode::postInitialize( const Map* map, const TerrainOptions& options )
{
    TerrainEngineNode::postInitialize( map, options );

    // Initialize the map frames. We need one for the update thread and one for the
    // cull thread. Someday we can detect whether these are actually the same thread
    // (depends on the viewer's threading mode).
    _update_mapf = new MapFrame( map, Map::ENTIRE_MODEL, "mp-update" );

    // merge in the custom options:
    _terrainOptions.merge( options );

    // A shared registry for tile nodes in the scene graph. Enable revision tracking
    // if requested in the options. Revision tracking lets the registry notify all
    // live tiles of the current map revision so they can inrementally update
    // themselves if necessary.
    _liveTiles = new TileNodeRegistry("live");
    _liveTiles->setRevisioningEnabled( _terrainOptions.incrementalUpdate() == true );
    _liveTiles->setMapRevision( _update_mapf->getRevision() );

    // set up a registry for quick release:
    if ( _terrainOptions.quickReleaseGLObjects() == true )
    {
        _deadTiles = new TileNodeRegistry("dead");
    }

    // reserve GPU resources. Must do this before initializing the model factory.
    if ( _primaryUnit < 0 )
    {
        getResources()->reserveTextureImageUnit( _primaryUnit, "MP Engine Primary" );
    }

    // "Secondary" unit serves double duty; it's used for parent textures BUT it's also
    // used at the "slot" for the tile coordinates.
    if ( _secondaryUnit < 0 )
    {
        getResources()->reserveTextureImageUnit( _secondaryUnit, "MP Engine Secondary" );
    }
    
    // initialize the model factory:
    _tileModelFactory = new TileModelFactory(_liveTiles.get(), _terrainOptions, this);

    // handle an already-established map profile:
    if ( _update_mapf->getProfile() )
    {
        // NOTE: this will initialize the map with the startup layers
        onMapInfoEstablished( MapInfo(map) );
    }

    // install a layer callback for processing further map actions:
    map->addMapCallback( new MPTerrainEngineNodeMapCallbackProxy(this) );

    // Prime with existing layers:
    _batchUpdateInProgress = true;

    ElevationLayerVector elevationLayers;
    map->getElevationLayers( elevationLayers );
    for( ElevationLayerVector::const_iterator i = elevationLayers.begin(); i != elevationLayers.end(); ++i )
        addElevationLayer( i->get() );

    ImageLayerVector imageLayers;
    map->getImageLayers( imageLayers );
    for( ImageLayerVector::iterator i = imageLayers.begin(); i != imageLayers.end(); ++i )
        addImageLayer( i->get() );

    _batchUpdateInProgress = false;

    // register this instance to the osgDB plugin can find it.
    registerEngine( this );

    // set up the initial shaders and reserve the texture image units.
    updateState();

    // now that we have a map, set up to recompute the bounds
    dirtyBound();

    OE_INFO << LC << "Edge normalization is " << (_terrainOptions.normalizeEdges() == true? "ON" : "OFF") << std::endl;
}

/** Packages an image layer as a TMS folder. */
int
makeTMS( osg::ArgumentParser& args )
{
    // see if the user wants to override the type extension (imagery only)
    std::string extension;
    args.read( "--ext", extension );

    // verbosity?
    bool verbose = !args.read( "--quiet" );

    // find a .earth file on the command line
    std::string earthFile = findArgumentWithExtension( args, ".earth" );
    /*   if ( earthFile.empty() )
           return usage( "Missing required .earth file" );
           */
    // folder to which to write the TMS archive.
    std::string rootFolder;
    if( !args.read( "--out", rootFolder ) )
        rootFolder = Stringify() << earthFile << ".tms_repo";

    // whether to overwrite existing tile files
    bool overwrite = false;
    if( args.read( "--overwrite" ) )
        overwrite = true;

    // write out an earth file
    std::string outEarth;
    args.read( "--out-earth", outEarth );

    std::string dbOptions;
    args.read( "--db-options", dbOptions );
    std::string::size_type n = 0;
    while( (n = dbOptions.find( '"', n )) != dbOptions.npos )
    {
        dbOptions.erase( n, 1 );
    }

    osg::ref_ptr<osgDB::Options> options = new osgDB::Options( dbOptions );


    std::vector< Bounds > bounds;
    // restrict packaging to user-specified bounds.    
    double xmin = DBL_MAX, ymin = DBL_MAX, xmax = DBL_MIN, ymax = DBL_MIN;
    while( args.read( "--bounds", xmin, ymin, xmax, ymax ) )
    {
        Bounds b;
        b.xMin() = xmin, b.yMin() = ymin, b.xMax() = xmax, b.yMax() = ymax;
        bounds.push_back( b );
    }

    // max level to which to generate
    unsigned maxLevel = ~0;
    args.read( "--max-level", maxLevel );

    // whether to keep 'empty' tiles
    bool keepEmpties = args.read( "--keep-empties" );

    bool continueSingleColor = args.read( "--continue-single-color" );

    // max level to which to generate
    unsigned elevationPixelDepth = 32;
    args.read( "--elevation-pixel-depth", elevationPixelDepth );

    // load up the map
    osg::ref_ptr<MapNode> mapNode = MapNode::load( args );
    if( !mapNode.valid() )
        return usage( "Failed to load a valid .earth file" );

    // create a folder for the output
    osgDB::makeDirectory( rootFolder );
    if( !osgDB::fileExists( rootFolder ) )
        return usage( "Failed to create root output folder" );

    Map* map = mapNode->getMap();

    // fire up a packager:
    TMSPackager packager( map->getProfile(), options );

    packager.setVerbose( verbose );
    packager.setOverwrite( overwrite );
    packager.setKeepEmptyImageTiles( keepEmpties );
    packager.setSubdivideSingleColorImageTiles( continueSingleColor );
    packager.setElevationPixelDepth( elevationPixelDepth );

    if( maxLevel != ~0 )
        packager.setMaxLevel( maxLevel );

    if( bounds.size() > 0 )
    {
        for( unsigned int i = 0; i < bounds.size(); ++i )
        {
            Bounds b = bounds[i];
            if( b.isValid() )
                packager.addExtent( GeoExtent( map->getProfile()->getSRS(), b ) );
        }
    }


    // new map for an output earth file if necessary.
//.........这里部分代码省略.........