C++ geom::Rect类代码示例

Geom::Affine
sp_gradient_get_g2d_matrix(SPGradient const *gr, Geom::Affine const &ctm, Geom::Rect const &bbox)
{
    if (gr->getUnits() == SP_GRADIENT_UNITS_OBJECTBOUNDINGBOX) {
        return ( Geom::Scale(bbox.dimensions())
                 * Geom::Translate(bbox.min())
                 * Geom::Affine(ctm) );
    } else {
        return ctm;
    }
}

Layout::iterator Layout::getLetterAt(double x, double y) const
{
    Geom::Point point(x, y);

    double rotation;
    for (iterator it = begin() ; it != end() ; it.nextCharacter()) {
        Geom::Rect box = characterBoundingBox(it, &rotation);
        // todo: rotation
        if (box.contains(point)) return it;
    }
    return end();
}

void
ZoomStatus::on_value_changed()
{
    if (_upd_f) return;
    _upd_f = true;
    g_assert(_dt);
    double zoom_factor = pow(2, get_value());
    Geom::Rect const d = _dt->get_display_area();
    _dt->zoom_absolute(d.midpoint()[Geom::X], d.midpoint()[Geom::Y], zoom_factor);
    gtk_widget_grab_focus(static_cast<GtkWidget*>((void*)_dt->canvas));   /// \todo this no love song
    _upd_f = false;
}

void FilterFlood::render_cairo(FilterSlot &slot)
{
    cairo_surface_t *input = slot.getcairo(_input);

    double r = SP_RGBA32_R_F(color);
    double g = SP_RGBA32_G_F(color);
    double b = SP_RGBA32_B_F(color);
    double a = opacity;

#if defined(HAVE_LIBLCMS1) || defined(HAVE_LIBLCMS2)

    if (icc) {
        guchar ru, gu, bu;
        icc_color_to_sRGB(icc, &ru, &gu, &bu);
        r = SP_COLOR_U_TO_F(ru);
        g = SP_COLOR_U_TO_F(gu);
        b = SP_COLOR_U_TO_F(bu);
    }
#endif

    cairo_surface_t *out = ink_cairo_surface_create_same_size(input, CAIRO_CONTENT_COLOR_ALPHA);

    // Get filter primitive area in user units
    Geom::Rect fp = filter_primitive_area( slot.get_units() );

    // Convert to Cairo units
    Geom::Rect fp_cairo = fp * slot.get_units().get_matrix_user2pb();

    // Get area in slot (tile to fill)
    Geom::Rect sa = slot.get_slot_area();

    // Get overlap
    Geom::OptRect optoverlap = intersect( fp_cairo, sa );
    if( optoverlap ) {

        Geom::Rect overlap = *optoverlap;

        double dx = fp_cairo.min()[Geom::X] - sa.min()[Geom::X];
        double dy = fp_cairo.min()[Geom::Y] - sa.min()[Geom::Y];
        if( dx < 0.0 ) dx = 0.0;
        if( dy < 0.0 ) dy = 0.0;

        cairo_t *ct = cairo_create(out);
        cairo_set_source_rgba(ct, r, g, b, a);
        cairo_set_operator(ct, CAIRO_OPERATOR_SOURCE);
        cairo_rectangle(ct, dx, dy, overlap.width(), overlap.height() );
        cairo_fill(ct);
        cairo_destroy(ct);
    }

    slot.set(_output, out);
    cairo_surface_destroy(out);
}

void
sp_gradient_set_gs2d_matrix(SPGradient *gr, Geom::Affine const &ctm,
                            Geom::Rect const &bbox, Geom::Affine const &gs2d)
{
    gr->gradientTransform = gs2d * ctm.inverse();
    if (gr->getUnits() == SP_GRADIENT_UNITS_OBJECTBOUNDINGBOX ) {
        gr->gradientTransform = ( gr->gradientTransform
                                  * Geom::Translate(-bbox.min())
                                  * Geom::Scale(bbox.dimensions()).inverse() );
    }
    gr->gradientTransform_set = TRUE;

    gr->requestModified(SP_OBJECT_MODIFIED_FLAG);
}

Persp3D *persp3d_create_xml_element(SPDocument *document, Persp3DImpl *dup) {// if dup is given, copy the attributes over
    SPDefs *defs = document->getDefs();
    Inkscape::XML::Document *xml_doc = document->getReprDoc();
    Inkscape::XML::Node *repr;

    /* if no perspective is given, create a default one */
    repr = xml_doc->createElement("inkscape:perspective");
    repr->setAttribute("sodipodi:type", "inkscape:persp3d");

    // Use 'user-units'
    double width = document->getWidth().value("px");
    double height = document->getHeight().value("px");
    if( document->getRoot()->viewBox_set ) {
        Geom::Rect vb = document->getRoot()->viewBox;
        width = vb.width();
        height = vb.height();
    }

    Proj::Pt2 proj_vp_x = Proj::Pt2 (0.0,   height/2.0, 1.0);
    Proj::Pt2 proj_vp_y = Proj::Pt2 (0.0,   1000.0,     0.0);
    Proj::Pt2 proj_vp_z = Proj::Pt2 (width, height/2.0, 1.0);
    Proj::Pt2 proj_origin = Proj::Pt2 (width/2.0, height/3.0, 1.0 );

    if (dup) {
        proj_vp_x = dup->tmat.column (Proj::X);
        proj_vp_y = dup->tmat.column (Proj::Y);
        proj_vp_z = dup->tmat.column (Proj::Z);
        proj_origin = dup->tmat.column (Proj::W);
    }

    gchar *str = NULL;
    str = proj_vp_x.coord_string();
    repr->setAttribute("inkscape:vp_x", str);
    g_free (str);
    str = proj_vp_y.coord_string();
    repr->setAttribute("inkscape:vp_y", str);
    g_free (str);
    str = proj_vp_z.coord_string();
    repr->setAttribute("inkscape:vp_z", str);
    g_free (str);
    str = proj_origin.coord_string();
    repr->setAttribute("inkscape:persp3d-origin", str);
    g_free (str);

    /* Append the new persp3d to defs */
    defs->getRepr()->addChild(repr, NULL);
    Inkscape::GC::release(repr);

    return reinterpret_cast<Persp3D *>( defs->get_child_by_repr(repr) );
}

void
LPEMirrorSymmetry::doOnApply (SPLPEItem *lpeitem)
{
    using namespace Geom;

    SPItem *item = SP_ITEM(lpeitem);
    Geom::Matrix t = sp_item_i2d_affine(item);
    Geom::Rect bbox = *item->getBounds(t); // fixme: what happens if getBounds does not return a valid rect?

    Point A(bbox.left(), bbox.bottom());
    Point B(bbox.left(), bbox.top());
    A *= t;
    B *= t;
    Piecewise<D2<SBasis> > rline = Piecewise<D2<SBasis> >(D2<SBasis>(Linear(A[X], B[X]), Linear(A[Y], B[Y])));
    reflection_line.set_new_value(rline, true);
}

void
LPEMirrorSymmetry::doOnApply (SPLPEItem const* lpeitem)
{
    using namespace Geom;

    // fixme: what happens if the bbox is empty?
    // fixme: this is probably wrong
    Geom::Affine t = lpeitem->i2dt_affine();
    Geom::Rect bbox = *lpeitem->desktopVisualBounds();

    Point A(bbox.left(), bbox.bottom());
    Point B(bbox.left(), bbox.top());
    A *= t;
    B *= t;
    Piecewise<D2<SBasis> > rline = Piecewise<D2<SBasis> >(D2<SBasis>(SBasis(A[X], B[X]), SBasis(A[Y], B[Y])));
    reflection_line.set_new_value(rline, true);
}

/** Feeds path-creating calls to the cairo context translating them from the Path, with the given transform and shift */
static void
feed_path_to_cairo (cairo_t *ct, Geom::Path const &path, Geom::Affine trans, Geom::OptRect area, bool optimize_stroke, double stroke_width)
{
    if (!area)
        return;
    if (path.empty())
        return;

    // Transform all coordinates to coords within "area"
    Geom::Point shift = area->min();
    Geom::Rect view = *area;
    view.expandBy (stroke_width);
    view = view * (Geom::Affine)Geom::Translate(-shift);
    //  Pass transformation to feed_curve, so that we don't need to create a whole new path.
    Geom::Affine transshift(trans * Geom::Translate(-shift));

    Geom::Point initial = path.initialPoint() * transshift;
    cairo_move_to(ct, initial[0], initial[1] );

    for(Geom::Path::const_iterator cit = path.begin(); cit != path.end_open(); ++cit) {
        feed_curve_to_cairo(ct, *cit, transshift, view, optimize_stroke);
    }

    if (path.closed()) {
        if (!optimize_stroke) {
            cairo_close_path(ct);
        } else {
            cairo_line_to(ct, initial[0], initial[1]);
            /* We cannot use cairo_close_path(ct) here because some parts of the path may have been
               clipped and not drawn (maybe the before last segment was outside view area), which 
               would result in closing the "subpath" after the last interruption, not the entire path.

               However, according to cairo documentation:
               The behavior of cairo_close_path() is distinct from simply calling cairo_line_to() with the equivalent coordinate
               in the case of stroking. When a closed sub-path is stroked, there are no caps on the ends of the sub-path. Instead,
               there is a line join connecting the final and initial segments of the sub-path. 

               The correct fix will be possible when cairo introduces methods for moving without
               ending/starting subpaths, which we will use for skipping invisible segments; then we
               will be able to use cairo_close_path here. This issue also affects ps/eps/pdf export,
               see bug 168129
            */
        }
    }
}

/**
 * Get the item under the specified point.
 * Searches the tree for the first item in the Z-order which is closer than
 * @a delta to the given point. The pick should be visual - for example
 * an object with a thick stroke should pick on the entire area of the stroke.
 * @param p Search point
 * @param delta Maximum allowed distance from the point
 * @param sticky Whether the pick should ignore visibility and sensitivity.
 *               When false, only visible and sensitive objects are considered.
 *               When true, invisible and insensitive objects can also be picked.
 */
DrawingItem *
DrawingItem::pick(Geom::Point const &p, double delta, unsigned flags)
{
    // Sometimes there's no BBOX in state, reason unknown (bug 992817)
    // I made this not an assert to remove the warning
    if (!(_state & STATE_BBOX) || !(_state & STATE_PICK)) {
        g_warning("Invalid state when picking: STATE_BBOX = %d, STATE_PICK = %d",
                  _state & STATE_BBOX, _state & STATE_PICK);
        return NULL;
    }
    // ignore invisible and insensitive items unless sticky
    if (!(flags & PICK_STICKY) && !(_visible && _sensitive))
        return NULL;

    bool outline = _drawing.outline();

    if (!_drawing.outline()) {
        // pick inside clipping path; if NULL, it means the object is clipped away there
        if (_clip) {
            DrawingItem *cpick = _clip->pick(p, delta, flags | PICK_AS_CLIP);
            if (!cpick) return NULL;
        }
        // same for mask
        if (_mask) {
            DrawingItem *mpick = _mask->pick(p, delta, flags);
            if (!mpick) return NULL;
        }
    }

    Geom::OptIntRect box = (outline || (flags & PICK_AS_CLIP)) ? _bbox : _drawbox;
    if (!box) {
        return NULL;
    }

    Geom::Rect expanded = *box;
    expanded.expandBy(delta);

    if (expanded.contains(p)) {
        return _pickItem(p, delta, flags);
    }
    return NULL;
}

SPItem *Selection::_sizeistItem(bool sml, Selection::CompareSize compare) {
    std::vector<SPItem*> const items = const_cast<Selection *>(this)->itemList();
    gdouble max = sml ? 1e18 : 0;
    SPItem *ist = NULL;

    for ( std::vector<SPItem*>::const_iterator i=items.begin();i!=items.end(); ++i) {
        Geom::OptRect obox = SP_ITEM(*i)->desktopPreferredBounds();
        if (!obox || obox.isEmpty()) continue;
        Geom::Rect bbox = *obox;

        gdouble size = compare == 2 ? bbox.area() :
            (compare == 1 ? bbox.width() : bbox.height());
        size = sml ? size : size * -1;
        if (size < max) {
            max = size;
            ist = SP_ITEM(*i);
        }
    }
    return ist;
}

static double
sp_canvas_bpath_point (SPCanvasItem *item, Geom::Point p, SPCanvasItem **actual_item)
{
    SPCanvasBPath *cbp = SP_CANVAS_BPATH (item);

    if ( !cbp->curve  || 
         ((cbp->stroke_rgba & 0xff) == 0 && (cbp->fill_rgba & 0xff) == 0 ) || 
         cbp->curve->get_segment_count() < 1)
        return Geom::infinity();

    double width = 0.5;
    Geom::Rect viewbox = item->canvas->getViewbox();
    viewbox.expandBy (width);
    double dist = Geom::infinity();
    pathv_matrix_point_bbox_wind_distance(cbp->curve->get_pathvector(), cbp->affine, p, NULL, NULL, &dist, 0.5, &viewbox);

    if (dist <= 1.0) {
        *actual_item = item;
    }

    return dist;
}

/**
 * Given a Geom::Rect that may, for example, correspond to the bbox of an object,
 * this function fits the canvas to that rect by resizing the canvas
 * and translating the document root into position.
 */
void SPDocument::fitToRect(Geom::Rect const &rect)
{
    double const w = rect.width();
    double const h = rect.height();

    double const old_height = sp_document_height(this);
    SPUnit const &px(sp_unit_get_by_id(SP_UNIT_PX));
    sp_document_set_width(this, w, &px);
    sp_document_set_height(this, h, &px);

    Geom::Translate const tr(Geom::Point(0, (old_height - h))
                             - to_2geom(rect.min()));
    SP_GROUP(root)->translateChildItems(tr);
    SPNamedView *nv = sp_document_namedview(this, 0);
    if(nv) {
        Geom::Translate tr2(-rect.min());
        nv->translateGuides(tr2);

        // update the viewport so the drawing appears to stay where it was
        nv->scrollAllDesktops(-tr2[0], tr2[1], false);
    }
}

boost::optional<Geom::Point> Line::intersection_with_viewbox (SPDesktop *desktop)
{
    Geom::Rect vb = desktop->get_display_area();
    /* remaining viewbox corners */
    Geom::Point ul (vb.min()[Geom::X], vb.max()[Geom::Y]);
    Geom::Point lr (vb.max()[Geom::X], vb.min()[Geom::Y]);

    std::pair <Geom::Point, Geom::Point> e = side_of_intersection (vb.min(), lr, vb.max(), ul, this->pt, this->v_dir);
    if (e.first == e.second) {
        // perspective line lies outside the canvas
        return boost::optional<Geom::Point>();
    }

    Line line (e.first, e.second);
    return this->intersect (line);
}

static bool is_within(Geom::Rect const &area, Geom::Rect const &box)
{
    return area.contains(box);
}