本文整理汇总了C++中clipperlib::Paths::insert方法的典型用法代码示例。如果您正苦于以下问题：C++ Paths::insert方法的具体用法？C++ Paths::insert怎么用？C++ Paths::insert使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类clipperlib::Paths的用法示例。
在下文中一共展示了Paths::insert方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: _offset
// This is a safe variant of the polygon offset, tailored for a single ExPolygon:
// a single polygon with multiple non-overlapping holes.
// Each contour and hole is offsetted separately, then the holes are subtracted from the outer contours.
ClipperLib::Paths _offset(const Slic3r::ExPolygon &expolygon, const float delta,
ClipperLib::JoinType joinType, double miterLimit)
{
// printf("new ExPolygon offset\n");
// 1) Offset the outer contour.
const float delta_scaled = delta * float(CLIPPER_OFFSET_SCALE);
ClipperLib::Paths contours;
{
ClipperLib::Path input = Slic3rMultiPoint_to_ClipperPath(expolygon.contour);
scaleClipperPolygon(input);
ClipperLib::ClipperOffset co;
if (joinType == jtRound)
co.ArcTolerance = miterLimit * double(CLIPPER_OFFSET_SCALE);
else
co.MiterLimit = miterLimit;
co.ShortestEdgeLength = double(std::abs(delta_scaled * CLIPPER_OFFSET_SHORTEST_EDGE_FACTOR));
co.AddPath(input, joinType, ClipperLib::etClosedPolygon);
co.Execute(contours, delta_scaled);
}
// 2) Offset the holes one by one, collect the results.
ClipperLib::Paths holes;
{
holes.reserve(expolygon.holes.size());
for (Polygons::const_iterator it_hole = expolygon.holes.begin(); it_hole != expolygon.holes.end(); ++ it_hole) {
ClipperLib::Path input = Slic3rMultiPoint_to_ClipperPath_reversed(*it_hole);
scaleClipperPolygon(input);
ClipperLib::ClipperOffset co;
if (joinType == jtRound)
co.ArcTolerance = miterLimit * double(CLIPPER_OFFSET_SCALE);
else
co.MiterLimit = miterLimit;
co.ShortestEdgeLength = double(std::abs(delta_scaled * CLIPPER_OFFSET_SHORTEST_EDGE_FACTOR));
co.AddPath(input, joinType, ClipperLib::etClosedPolygon);
ClipperLib::Paths out;
co.Execute(out, - delta_scaled);
holes.insert(holes.end(), out.begin(), out.end());
}
}
// 3) Subtract holes from the contours.
ClipperLib::Paths output;
if (holes.empty()) {
output = std::move(contours);
} else {
ClipperLib::Clipper clipper;
clipper.Clear();
clipper.AddPaths(contours, ClipperLib::ptSubject, true);
clipper.AddPaths(holes, ClipperLib::ptClip, true);
clipper.Execute(ClipperLib::ctDifference, output, ClipperLib::pftNonZero, ClipperLib::pftNonZero);
}
// 4) Unscale the output.
unscaleClipperPolygons(output);
return output;
}示例2: offset
// This is a safe variant of the polygon offset, tailored for a single ExPolygon:
// a single polygon with multiple non-overlapping holes.
// Each contour and hole is offsetted separately, then the holes are subtracted from the outer contours.
void offset(const Slic3r::ExPolygons &expolygons, ClipperLib::Paths* retval, const float delta,
ClipperLib::JoinType joinType, double miterLimit)
{
// printf("new ExPolygon offset\n");
const float delta_scaled = delta * float(CLIPPER_OFFSET_SCALE);
ClipperLib::Paths contours;
ClipperLib::Paths holes;
contours.reserve(expolygons.size());
{
size_t n_holes = 0;
for (size_t i = 0; i < expolygons.size(); ++ i)
n_holes += expolygons[i].holes.size();
holes.reserve(n_holes);
}
for (Slic3r::ExPolygons::const_iterator it_expoly = expolygons.begin(); it_expoly != expolygons.end(); ++ it_expoly) {
// 1) Offset the outer contour.
{
ClipperLib::Path input;
Slic3rMultiPoint_to_ClipperPath(it_expoly->contour, &input);
scaleClipperPolygon(input);
ClipperLib::ClipperOffset co;
if (joinType == jtRound)
co.ArcTolerance = miterLimit * double(CLIPPER_OFFSET_SCALE);
else
co.MiterLimit = miterLimit;
co.AddPath(input, joinType, ClipperLib::etClosedPolygon);
ClipperLib::Paths out;
co.Execute(out, delta_scaled);
contours.insert(contours.end(), out.begin(), out.end());
}
// 2) Offset the holes one by one, collect the results.
{
for (Polygons::const_iterator it_hole = it_expoly->holes.begin(); it_hole != it_expoly->holes.end(); ++ it_hole) {
ClipperLib::Path input;
Slic3rMultiPoint_to_ClipperPath_reversed(*it_hole, &input);
scaleClipperPolygon(input);
ClipperLib::ClipperOffset co;
if (joinType == jtRound)
co.ArcTolerance = miterLimit * double(CLIPPER_OFFSET_SCALE);
else
co.MiterLimit = miterLimit;
co.AddPath(input, joinType, ClipperLib::etClosedPolygon);
ClipperLib::Paths out;
co.Execute(out, - delta_scaled);
holes.insert(holes.end(), out.begin(), out.end());
}
}
}
// 3) Subtract holes from the contours.
ClipperLib::Paths output;
{
ClipperLib::Clipper clipper;
clipper.Clear();
clipper.AddPaths(contours, ClipperLib::ptSubject, true);
clipper.AddPaths(holes, ClipperLib::ptClip, true);
clipper.Execute(ClipperLib::ctDifference, *retval, ClipperLib::pftNonZero, ClipperLib::pftNonZero);
}
// 4) Unscale the output.
unscaleClipperPolygons(*retval);
}