当前位置: 首页>>代码示例>>C++>>正文

C++ base::PlannerData类代码示例

本文整理汇总了C++中base::PlannerData类的典型用法代码示例。如果您正苦于以下问题：C++ PlannerData类的具体用法？C++ PlannerData怎么用？C++ PlannerData使用的例子？那么, 这里精选的类代码示例或许可以为您提供帮助。


在下文中一共展示了PlannerData类的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: 

void ompl::control::KPIECE1::getPlannerData(base::PlannerData &data) const
{
    Planner::getPlannerData(data);

    Grid::CellArray cells;
    tree_.grid.getCells(cells);

    if (PlannerData *cpd = dynamic_cast<control::PlannerData*>(&data))
    {
        double delta = siC_->getPropagationStepSize();

        for (unsigned int i = 0 ; i < cells.size() ; ++i)
            for (unsigned int j = 0 ; j < cells[i]->data->motions.size() ; ++j)
            {
                const Motion* m = cells[i]->data->motions[j];
                if (m->parent)
                    cpd->recordEdge(m->parent->state, m->state, m->control, m->steps * delta);
                else
                    cpd->recordEdge(NULL, m->state, NULL, 0.);
                cpd->tagState(m->state, cells[i]->border ? 2 : 1);
            }
    }
    else
    {
        for (unsigned int i = 0 ; i < cells.size() ; ++i)
            for (unsigned int j = 0 ; j < cells[i]->data->motions.size() ; ++j)
            {
                const Motion* m = cells[i]->data->motions[j];
                data.recordEdge(m->parent ? m->parent->state : NULL, m->state);
                data.tagState(m->state, cells[i]->border ? 2 : 1);
            }
    }
}
开发者ID:megan-starr9，项目名称:UAV_Aiolos，代码行数:33，代码来源:KPIECE1.cpp

示例2: pd

void ompl::geometric::CForest::getPlannerData(base::PlannerData &data) const
{
    Planner::getPlannerData(data);

    for (std::size_t i = 0; i < planners_.size(); ++i)
    {
        base::PlannerData pd(si_);
        planners_[i]->getPlannerData(pd);

        for (unsigned int j = 0; j < pd.numVertices(); ++j)
        {
            base::PlannerDataVertex &v = pd.getVertex(j);

            v.setTag(i);
            std::vector<unsigned int> edgeList;
            unsigned int numEdges = pd.getIncomingEdges(j, edgeList);
            for (unsigned int k = 0; k < numEdges; ++k)
            {
                base::Cost edgeWeight;
                base::PlannerDataVertex &w = pd.getVertex(edgeList[k]);

                w.setTag(i);
                pd.getEdgeWeight(j, k, &edgeWeight);
                data.addEdge(v, w, pd.getEdge(j, k), edgeWeight);
            }
        }

        for (unsigned int j = 0; j < pd.numGoalVertices(); ++j)
            data.markGoalState(pd.getGoalVertex(j).getState());

        for (unsigned int j = 0; j < pd.numStartVertices(); ++j)
            data.markStartState(pd.getStartVertex(j).getState());
    }
}
开发者ID:jvgomez，项目名称:ompl，代码行数:34，代码来源:CForest.cpp

示例3: PlannerDataEdgeControl

void ompl::control::EST::getPlannerData(base::PlannerData &data) const
{
    Planner::getPlannerData(data);

    std::vector<MotionInfo> motionInfo;
    tree_.grid.getContent(motionInfo);

    double stepSize = siC_->getPropagationStepSize();

    if (lastGoalMotion_)
        data.addGoalVertex(base::PlannerDataVertex(lastGoalMotion_->state));

    for (auto &mi : motionInfo)
        for (auto &motion : mi.motions_)
        {
            if (motion->parent)
            {
                if (data.hasControls())
                    data.addEdge(base::PlannerDataVertex(motion->parent->state), base::PlannerDataVertex(motion->state),
                                 PlannerDataEdgeControl(motion->control, motion->steps * stepSize));
                else
                    data.addEdge(base::PlannerDataVertex(motion->parent->state),
                                 base::PlannerDataVertex(motion->state));
            }
            else
                data.addStartVertex(base::PlannerDataVertex(motion->state));
        }
}
开发者ID:ompl，项目名称:ompl，代码行数:28，代码来源:EST.cpp

示例4: 

void ompl::control::SyclopRRT::getPlannerData(base::PlannerData &data) const
{
    Planner::getPlannerData(data);
    std::vector<Motion *> motions;
    if (nn_)
        nn_->list(motions);
    double delta = siC_->getPropagationStepSize();

    if (lastGoalMotion_)
        data.addGoalVertex(base::PlannerDataVertex(lastGoalMotion_->state));

    for (auto &motion : motions)
    {
        if (motion->parent)
        {
            if (data.hasControls())
                data.addEdge(base::PlannerDataVertex(motion->parent->state), base::PlannerDataVertex(motion->state),
                             control::PlannerDataEdgeControl(motion->control, motion->steps * delta));
            else
                data.addEdge(base::PlannerDataVertex(motion->parent->state), base::PlannerDataVertex(motion->state));
        }
        else
            data.addStartVertex(base::PlannerDataVertex(motion->state));
    }
}
开发者ID:davetcoleman，项目名称:ompl，代码行数:25，代码来源:SyclopRRT.cpp

示例5: 

void ompl::control::RRT::getPlannerData(base::PlannerData &data) const
{
    Planner::getPlannerData(data);

    std::vector<Motion*> motions;
    if (nn_)
        nn_->list(motions);

    double delta = siC_->getPropagationStepSize();

    if (lastGoalMotion_)
        data.addGoalVertex(base::PlannerDataVertex(lastGoalMotion_->state));

    for (unsigned int i = 0 ; i < motions.size() ; ++i)
    {
        const Motion* m = motions[i];
        if (m->parent)
        {
            if (data.hasControls())
                data.addEdge(base::PlannerDataVertex(m->parent->state),
                             base::PlannerDataVertex(m->state),
                             control::PlannerDataEdgeControl(m->control, m->steps * delta));
            else
                data.addEdge(base::PlannerDataVertex(m->parent->state),
                             base::PlannerDataVertex(m->state));
        }
        else
            data.addStartVertex(base::PlannerDataVertex(m->state));
    }
}
开发者ID:giogadi，项目名称:ompl，代码行数:30，代码来源:RRT.cpp

示例6: 

void ompl::geometric::RRTsharp::getPlannerData(base::PlannerData &data) const
{
    Planner::getPlannerData(data);

    std::vector<Motion*> motions;
    if (nn_)
        nn_->list(motions);

    if (lastGoalMotion_)
        data.addGoalVertex(base::PlannerDataVertex(lastGoalMotion_->state));

    for (std::size_t i = 0 ; i < motions.size() ; ++i)
    {
        if (motions[i]->parent == NULL)
            data.addStartVertex(base::PlannerDataVertex(motions[i]->state));
        else
            data.addEdge(base::PlannerDataVertex(motions[i]->parent->state),
                         base::PlannerDataVertex(motions[i]->state));
        // if (visitedMotions.count(motions[i])!=0){
        //     data.tagState(motions[i]->state,1);
        // }
        // if (toVisitMotions.count(motions[i])!=0){
        //     data.tagState(motions[i]->state,2);
        // }
    }
}
开发者ID:EmmanuelBoidot，项目名称:RRTsharp，代码行数:26，代码来源:RRTsharp.cpp

示例7: 

void ompl::control::SyclopEST::getPlannerData(base::PlannerData &data) const
{
    Planner::getPlannerData(data);

    double delta = siC_->getPropagationStepSize();

    if (lastGoalMotion_)
        data.addGoalVertex(lastGoalMotion_->state);

    for (size_t i = 0; i < motions_.size(); ++i)
    {
        if (motions_[i]->parent)
        {
            if (data.hasControls())
                data.addEdge (base::PlannerDataVertex(motions_[i]->parent->state),
                              base::PlannerDataVertex(motions_[i]->state),
                              control::PlannerDataEdgeControl (motions_[i]->control, motions_[i]->steps * delta));
            else
                data.addEdge (base::PlannerDataVertex(motions_[i]->parent->state),
                              base::PlannerDataVertex(motions_[i]->state));
        }
        else
            data.addStartVertex (base::PlannerDataVertex(motions_[i]->state));
    }
}
开发者ID:HRZaheri，项目名称:batch-informed-trees，代码行数:25，代码来源:SyclopEST.cpp

示例8: foreach

void ompl::geometric::LazyPRM::getPlannerData(base::PlannerData &data) const
{
    Planner::getPlannerData(data);

    // Explicitly add start and goal states. Tag all states known to be valid as 1.
    // Unchecked states are tagged as 0.
    for (size_t i = 0; i < startM_.size(); ++i)
        data.addStartVertex(base::PlannerDataVertex(stateProperty_[startM_[i]], 1));

    for (size_t i = 0; i < goalM_.size(); ++i)
        data.addGoalVertex(base::PlannerDataVertex(stateProperty_[goalM_[i]], 1));

    // Adding edges and all other vertices simultaneously
    foreach(const Edge e, boost::edges(g_))
    {
        const Vertex v1 = boost::source(e, g_);
        const Vertex v2 = boost::target(e, g_);
        data.addEdge(base::PlannerDataVertex(stateProperty_[v1]),
                     base::PlannerDataVertex(stateProperty_[v2]));

        // Add the reverse edge, since we're constructing an undirected roadmap
        data.addEdge(base::PlannerDataVertex(stateProperty_[v2]),
                     base::PlannerDataVertex(stateProperty_[v1]));

        // Add tags for the newly added vertices
        data.tagState(stateProperty_[v1], (vertexValidityProperty_[v1] & VALIDITY_TRUE) == 0 ? 0 : 1);
        data.tagState(stateProperty_[v2], (vertexValidityProperty_[v2] & VALIDITY_TRUE) == 0 ? 0 : 1);
    }
}
开发者ID:HRZaheri，项目名称:batch-informed-trees，代码行数:29，代码来源:LazyPRM.cpp

示例9: PlannerDataEdgeControl

void ompl::control::EST::getPlannerData(base::PlannerData &data) const
{
    Planner::getPlannerData(data);

    std::vector<MotionInfo> motions;
    tree_.grid.getContent(motions);

    double stepSize = siC_->getPropagationStepSize();

    if (lastGoalMotion_)
        data.addGoalVertex(base::PlannerDataVertex(lastGoalMotion_->state));

    for (unsigned int i = 0 ; i < motions.size() ; ++i)
        for (unsigned int j = 0 ; j < motions[i].size() ; ++j)
        {
            if (motions[i][j]->parent)
            {
                if (data.hasControls())
                    data.addEdge (base::PlannerDataVertex (motions[i][j]->parent->state),
                                  base::PlannerDataVertex (motions[i][j]->state),
                                  PlannerDataEdgeControl(motions[i][j]->control, motions[i][j]->steps * stepSize));
                else
                    data.addEdge (base::PlannerDataVertex (motions[i][j]->parent->state),
                                  base::PlannerDataVertex (motions[i][j]->state));
            }
            else
                data.addStartVertex (base::PlannerDataVertex (motions[i][j]->state));
        }
}
开发者ID:jdmartin86，项目名称:ompl，代码行数:29，代码来源:EST.cpp

示例10: 

void ompl::geometric::LBKPIECE1::getPlannerData(base::PlannerData &data) const
{
    Planner::getPlannerData(data);
    dStart_.getPlannerData(data, 1, true, NULL);
    dGoal_.getPlannerData(data, 2, false, NULL);

    // Insert the edge connecting the two trees
    data.addEdge (data.vertexIndex(connectionPoint_.first), data.vertexIndex(connectionPoint_.second));
}
开发者ID:giogadi，项目名称:ompl，代码行数:9，代码来源:LBKPIECE1.cpp

示例11: 

void ompl::geometric::LazyRRT::getPlannerData(base::PlannerData &data) const
{
    Planner::getPlannerData(data);

    std::vector<Motion*> motions;
    if (nn_)
        nn_->list(motions);

    for (unsigned int i = 0 ; i < motions.size() ; ++i)
    {
        data.recordEdge(motions[i]->parent ? motions[i]->parent->state : NULL, motions[i]->state);
        if (motions[i]->valid)
            data.tagState(motions[i]->state, 1);
    }
}
开发者ID:megan-starr9，项目名称:UAV_Aiolos，代码行数:15，代码来源:LazyRRT.cpp

示例12: 

void ompl::control::SyclopEST::getPlannerData(base::PlannerData& data) const
{
    Planner::getPlannerData(data);
    if (PlannerData *cpd = dynamic_cast<control::PlannerData*>(&data))
    {
        const double delta = siC_->getPropagationStepSize();

        for (std::vector<Motion*>::const_iterator i = motions_.begin(); i != motions_.end(); ++i)
        {
            const Motion* m = *i;
            if (m->parent)
                cpd->recordEdge(m->parent->state, m->state, m->control, m->steps * delta);
            else
                cpd->recordEdge(NULL, m->state, NULL, 0.);
        }
    }
    else
    {
        for (std::vector<Motion*>::const_iterator i = motions_.begin(); i != motions_.end(); ++i)
        {
            const Motion* m = *i;
            data.recordEdge(m->parent ? m->parent->state : NULL, m->state);
        }
    }
}
开发者ID:megan-starr9，项目名称:UAV_Aiolos，代码行数:25，代码来源:SyclopEST.cpp

示例13: 

void ompl::control::SST::getPlannerData(base::PlannerData &data) const
{
    Planner::getPlannerData(data);

    std::vector<Motion*> motions;
    std::vector<Motion*> allMotions;
    if (nn_)
        nn_->list(motions);

    for(unsigned i=0;i<motions.size();i++)
    {
        if(motions[i]->numChildren_==0)
        {
            allMotions.push_back(motions[i]);
        }
    }
    for(unsigned i=0;i<allMotions.size();i++)
    {
        if(allMotions[i]->parent_!=NULL)
        {
            allMotions.push_back(allMotions[i]->parent_);
        }
    }

    double delta = siC_->getPropagationStepSize();

    if (prevSolution_.size()!=0)
        data.addGoalVertex(base::PlannerDataVertex(prevSolution_[0]));

    for (unsigned int i = 0 ; i < allMotions.size() ; ++i)
    {
        const Motion *m = allMotions[i];
        if (m->parent_)
        {
            if (data.hasControls())
                data.addEdge(base::PlannerDataVertex(m->parent_->state_),
                             base::PlannerDataVertex(m->state_),
                             control::PlannerDataEdgeControl(m->control_, m->steps_ * delta));
            else
                data.addEdge(base::PlannerDataVertex(m->parent_->state_),
                             base::PlannerDataVertex(m->state_));
        }
        else
            data.addStartVertex(base::PlannerDataVertex(m->state_));
    }
}
开发者ID:HRZaheri，项目名称:batch-informed-trees，代码行数:46，代码来源:SST.cpp

示例14: 

void ompl::geometric::BasicPRMmodif::getPlannerData(base::PlannerData &data) const
{
    Planner::getPlannerData(data);

    for (unsigned int i = 0 ; i < milestones_.size() ; ++i)
        for (unsigned int j = 0 ; j < milestones_[i]->adjacent.size() ; ++j)
            data.recordEdge(milestones_[i]->state, milestones_[i]->adjacent[j]->state);
}
开发者ID:nicocoaste，项目名称:newBoundingBoxPlanner，代码行数:8，代码来源:BasicPRMmodif.cpp

示例15: 

void ompl::control::PID::getPlannerData(base::PlannerData &data) const
{
	Planner::getPlannerData(data);
	double delta = siC_->getPropagationStepSize();

	if (motions.back())
	{
		data.addGoalVertex(base::PlannerDataVertex(motions.back()->state));
	}

	for (int i = motions.size()-1 ; i >= 1 ; --i)
	{
		const Motion* m = motions[i];
		data.addEdge(base::PlannerDataVertex(motions[i-1]->state), base::PlannerDataVertex(m->state), control::PlannerDataEdgeControl(m->control, delta));
	}
	data.addStartVertex(base::PlannerDataVertex(motions.front()->state));
}
开发者ID:Copilot-Language，项目名称:copilot-discussion，代码行数:17，代码来源:pid_ctrl.cpp


注：本文中的base::PlannerData类示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。