C++ string::equals_ci方法代码示例

	void DoAdd(CommandSource &source, ChanServ::Channel *ci, const Anope::string &word)
	{
		size_t pos = word.rfind(' ');
		BadWordType bwtype = BW_ANY;
		Anope::string realword = word;

		if (pos != Anope::string::npos)
		{
			Anope::string opt = word.substr(pos + 1);
			if (!opt.empty())
			{
				if (opt.equals_ci("SINGLE"))
					bwtype = BW_SINGLE;
				else if (opt.equals_ci("START"))
					bwtype = BW_START;
				else if (opt.equals_ci("END"))
					bwtype = BW_END;
			}
			realword = word.substr(0, pos);
		}

		unsigned badwordsmax = Config->GetModule(this->module)->Get<unsigned>("badwordsmax");
		if (badwords->GetBadWordCount(ci) >= badwordsmax)
		{
			source.Reply(_("Sorry, you can only have \002{0}\002 bad words entries on a channel."), badwordsmax);
			return;
		}

		bool casesensitive = Config->GetModule(this->module)->Get<bool>("casesensitive");

		for (BadWord *bw : badwords->GetBadWords(ci))
			if ((casesensitive && realword.equals_cs(bw->GetWord())) || (!casesensitive && realword.equals_ci(bw->GetWord())))
			{
				source.Reply(_("\002{0}\002 already exists in \002{1}\002 bad words list."), bw->GetWord(), ci->GetName());
				return;
			}

		bool override = !source.AccessFor(ci).HasPriv("BADWORDS");
		Log(override ? LOG_OVERRIDE : LOG_COMMAND, source, this, ci) << "ADD " << realword;
		badwords->AddBadWord(ci, realword, bwtype);

		source.Reply(_("\002{0}\002 added to \002{1}\002 bad words list."), realword, ci->GetName());
	}

	void Run(CommandSource &source, const Anope::string &user, const Anope::string &param)
	{
		NickAlias *na = findnick(user);
		if (!na)
		{
			source.Reply(NICK_X_NOT_REGISTERED, user.c_str());
			return;
		}
		NickCore *nc = na->nc;

		if (param.equals_ci("ON"))
		{
			nc->SetFlag(NI_SECURE);
			source.Reply(_("Secure option is now \002on\002 for \002%s\002."), nc->display.c_str());
		}
		else if (param.equals_ci("OFF"))
		{
			nc->UnsetFlag(NI_SECURE);
			source.Reply(_("Secure option is now \002off\002 for \002%s\002."), nc->display.c_str());
		}
		else
			this->OnSyntaxError(source, "SECURE");
	}

	int CountEmail(const Anope::string &email, NickServ::Account *unc)
	{
		int count = 0;

		if (email.empty())
			return 0;

		Anope::string cleanemail = clean ? CleanMail(email) : email;

		for (NickServ::Account *nc : NickServ::service->GetAccountList())
		{
			Anope::string cleannc = clean ? CleanMail(nc->GetEmail()) : nc->GetEmail();

			if (unc != nc && cleanemail.equals_ci(cleannc))
				++count;
		}

		return count;
	}

/**
 * Is the given nick a network service
 * @param nick to check
 * @param int Check if botserv bots
 * @return int
 */
bool nickIsServices(const Anope::string &tempnick, bool bot)
{
	if (tempnick.empty())
		return false;

	Anope::string nick = tempnick;

	size_t at = nick.find('@');
	if (at != Anope::string::npos)
	{
		Anope::string servername = nick.substr(at + 1);
		if (!servername.equals_ci(Config->ServerName))
			return false;
		nick = nick.substr(0, at);
	}

	BotInfo *bi = findbot(nick);
	if (bi)
		return bot ? true : bi->HasFlag(BI_CORE);
	return false;
}

	bool OnHelp(CommandSource &source, const Anope::string &subcommand) override
	{
		if (subcommand.empty())
		{
			CommandInfo *help = source.service->FindCommand("generic/help");
			if (!help)
				return false;
			source.Reply(_("Sets various memo options. \037option\037 can be one of:\n"
			               "\n"
			               "    NOTIFY      Changes when you will be notified about\n"
			               "                new memos (only for nicknames)\n"
			               "    LIMIT       Sets the maximum number of memos you can\n"
			               "                receive\n"
			               "\n"
			               "Type \002{0}{1} {2} {3} \037option\037\002 for more information on a specific option."),
			               Config->StrictPrivmsg, source.service->nick, help->cname, source.command);
		}
		else if (subcommand.equals_ci("NOTIFY"))
			source.Reply(_("Syntax: \002NOTIFY {ON | LOGON | NEW | MAIL | NOMAIL | OFF}\002\n"
			               "\n"
			               "Changes when you will be notified about new memos:\n"
			               "\n"
			               "    ON      You will be notified of memos when you log on,\n"
			               "            when you unset /AWAY, and when they are sent\n"
			               "            to you.\n"
			               "\n"
			               "    LOGON   You will only be notified of memos when you log\n"
			               "            on or when you unset /AWAY.\n"
			               "\n"
			               "    NEW     You will only be notified of memos when they\n"
			               "            are sent to you.\n"
			               "\n"
			               "    MAIL    You will be notified of memos by email as well as\n"
			               "            any other settings you have.\n"
			               "\n"
			               "    NOMAIL  You will not be notified of memos by email.\n"
			               "\n"
			               "    OFF     You will not receive any notification of memos.\n"
			               "\n"
			               "\002ON\002 is essentially \002LOGON\002 and \002NEW\002 combined."));
		else if (subcommand.equals_ci("LIMIT"))
		{
			int max_memos = Config->GetModule("memoserv")->Get<int>("maxmemos");
			if (source.IsServicesOper())
				source.Reply(_("Syntax: \002LIMIT [\037user\037 | \037channel\037] {\037limit\037 | NONE} [HARD]\002\n"
				               "\n"
				               "Sets the maximum number of memos a user or channel is allowed to have."
				               "  Setting the limit to 0 prevents the user from receiving any memos; setting it to \002NONE\002 allows the user to receive and keep as many memos as they want."
				               "  If you do not give a nickname or channel, your own limit is set.\n"
				               "\n"
				               "Adding \002HARD\002 prevents the user from changing the limit."
				               " Not adding \002HARD\002 has the opposite effect, allowing the user to change the limit, even if a previous limit was set.\n"
				               " \n"
				               "This use of the \002{0} LIMIT\002 command is limited to \002Services Operators\002."
				               " Other users may only enter a limit for themselves or a channel on which they have the \002MEMO\002 privilege on, may not remove their limit, may not set a limit above {1}, and may not set a hard limit."),
				               source.command, max_memos);
			else
				source.Reply(_("Syntax: \002LIMIT [\037channel\037] \037limit\037\002\n"
				               "\n"
				              "Sets the maximum number of memos you, or the given channel, are allowed to have."
				              " If you set this to 0, no one will be able to send any memos to you."
				              "However, you cannot set this any higher than {0}."), max_memos);
		}
		else
			return false;

		return true;
	}

	void Execute(CommandSource &source, const std::vector<Anope::string> &params) override
	{

		MemoServ::MemoInfo *mi;
		ChanServ::Channel *ci = NULL;
		Anope::string numstr = params[0], chan;

		if (!numstr.empty() && numstr[0] == '#')
		{
			chan = numstr;
			numstr = params.size() > 1 ? params[1] : "";

			ci = ChanServ::Find(chan);
			if (!ci)
			{
				source.Reply(_("Channel \002{0}\002 isn't registered."), chan);
				return;
			}

			if (!source.AccessFor(ci).HasPriv("MEMO"))
			{
				source.Reply(_("Access denied. You do not have privilege \002{0}\002 on \002{1}\002."), "MEMO", ci->GetName());
				return;
			}

			mi = ci->GetMemos();
		}
		else
			mi = source.nc->GetMemos();

		if (numstr.empty() || (!numstr.equals_ci("LAST") && !numstr.equals_ci("NEW") && !numstr.is_number_only()))
		{
			this->OnSyntaxError(source, numstr);
			return;
		}

		if (!mi)
			return;

		auto memos = mi->GetMemos();

		if (memos.empty())
		{
			if (!chan.empty())
				source.Reply(_("\002{0}\002 has no memos."), chan);
			else
				source.Reply(_("You have no memos."));
			return;
		}

		int i, end;

		if (numstr.equals_ci("NEW"))
		{
			int readcount = 0;
			for (i = 0, end = memos.size(); i < end; ++i)
				if (mi->GetMemo(i)->GetUnread())
				{
					DoRead(source, mi, ci, i);
					++readcount;
				}
			if (!readcount)
			{
				if (!chan.empty())
					source.Reply(_("\002{0}\002 has no new memos."), chan);
				else
					source.Reply(_("You have no new memos."));
			}
		}
		else if (numstr.equals_ci("LAST"))
		{
			for (i = 0, end = memos.size() - 1; i < end; ++i);
			DoRead(source, mi, ci, i);
		}
		else /* number[s] */
		{
			NumberList(numstr, false,
				[&](unsigned int number)
				{
					if (!number || number > memos.size())
						return;

					DoRead(source, mi, ci, number - 1);
				},
				[]{});
		}
	}

	void Execute(CommandSource &source, const std::vector<Anope::string> &params) override
	{

		Anope::string param = !params.empty() ? params[0] : "", chan;
		ChanServ::Channel *ci = NULL;
		MemoServ::MemoInfo *mi;

		if (!param.empty() && param[0] == '#')
		{
			chan = param;
			param = params.size() > 1 ? params[1] : "";

			ci = ChanServ::Find(chan);
			if (!ci)
			{
				source.Reply(_("Channel \002{0}\002 isn't registered."), chan);
				return;
			}

			if (!source.AccessFor(ci).HasPriv("MEMO"))
			{
				source.Reply(_("Access denied. You do not have privilege \002{0}\002 on \002{1}\002."), "MEMO", ci->GetName());
				return;
			}

			mi = ci->GetMemos();
		}
		else
		{
			mi = source.nc->GetMemos();
		}

		if (!param.empty() && !isdigit(param[0]) && !param.equals_ci("NEW"))
		{
			this->OnSyntaxError(source);
			return;
		}

		if (!mi)
			return;

		auto memos = mi->GetMemos();

		if (!memos.size())
		{
			if (!chan.empty())
				source.Reply(_("\002{0}\002 has no memos."), chan);
			else
				source.Reply(_("You have no memos."));
			return;
		}

		ListFormatter list(source.GetAccount());

		list.AddColumn(_("Number")).AddColumn(_("Sender")).AddColumn(_("Date/Time"));

		if (!param.empty() && isdigit(param[0]))
		{
			NumberList(param, false,
				[&](unsigned int number)
				{
					if (!number || number > memos.size())
						return;

					MemoServ::Memo *m = mi->GetMemo(number - 1);

					ListFormatter::ListEntry entry;
					entry["Number"] = (m->GetUnread() ? "* " : "  ") + stringify(number);
					entry["Sender"] = m->GetSender();
					entry["Date/Time"] = Anope::strftime(m->GetTime(), source.GetAccount());
					list.AddEntry(entry);
				},
				[]{});
		}
		else
		{
			if (!param.empty())
			{
				unsigned i, end;
				for (i = 0, end = memos.size(); i < end; ++i)
					if (mi->GetMemo(i)->GetUnread())
						break;
				if (i == end)
				{
					if (!chan.empty())
						source.Reply(_("\002{0}\002 has no new memos."), chan);
					else
						source.Reply(_("You have no new memos."));
					return;
				}
			}

			for (unsigned i = 0, end = memos.size(); i < end; ++i)
			{
				if (!param.empty() && !mi->GetMemo(i)->GetUnread())
					continue;

				MemoServ::Memo *m = mi->GetMemo(i);

				ListFormatter::ListEntry entry;
//.........这里部分代码省略.........

	void Execute(CommandSource &source, const std::vector<Anope::string> &params)
	{
		const Anope::string &channel = params[0];
		const Anope::string &target = params[1];
		Anope::string what = params.size() > 2 ? params[2] : "";

		User *u = source.u;
		ChannelInfo *ci = cs_findchan(params[0]);
		if (ci == NULL)
		{
			source.Reply(CHAN_X_NOT_REGISTERED, params[0].c_str());
			return;
		}

		if (!ci->AccessFor(u).HasPriv("SET"))
		{
			source.Reply(ACCESS_DENIED);
			return;
		}
		ChannelInfo *target_ci = cs_findchan(target);
		if (!target_ci)
		{
			source.Reply(CHAN_X_NOT_REGISTERED, target.c_str());
			return;
		}
		if (!IsFounder(u, ci) || !IsFounder(u, target_ci))
		{
			source.Reply(ACCESS_DENIED);
			return;
		}

		if (what.equals_ci("ALL"))
			what.clear();

		if (what.empty())
		{
			delete target_ci;
			target_ci = new ChannelInfo(*ci);
			target_ci->name = target;
			RegisteredChannelList[target_ci->name] = target_ci;
			target_ci->c = findchan(target_ci->name);
			if (target_ci->c)
			{
				target_ci->c->ci = target_ci;

				check_modes(target_ci->c);

				ChannelMode *cm;
				if (u->FindChannel(target_ci->c) != NULL)
				{
					/* On most ircds you do not receive the admin/owner mode till its registered */
					if ((cm = ModeManager::FindChannelModeByName(CMODE_OWNER)))
						target_ci->c->SetMode(NULL, cm, u->nick);
					else if ((cm = ModeManager::FindChannelModeByName(CMODE_PROTECT)))
						target_ci->c->RemoveMode(NULL, cm, u->nick);
				}

				/* Mark the channel as persistent */
				if (target_ci->c->HasMode(CMODE_PERM))
					target_ci->SetFlag(CI_PERSIST);
				/* Persist may be in def cflags, set it here */
				else if (target_ci->HasFlag(CI_PERSIST) && (cm = ModeManager::FindChannelModeByName(CMODE_PERM)))
					target_ci->c->SetMode(NULL, CMODE_PERM);
	
				if (target_ci->bi && target_ci->c->FindUser(target_ci->bi) == NULL)
					target_ci->bi->Join(target_ci->c, &Config->BotModeList);
			}

			if (target_ci->c && !target_ci->c->topic.empty())
			{
				target_ci->last_topic = target_ci->c->topic;
				target_ci->last_topic_setter = target_ci->c->topic_setter;
				target_ci->last_topic_time = target_ci->c->topic_time;
			}
			else
				target_ci->last_topic_setter = source.owner->nick;

			FOREACH_MOD(I_OnChanRegistered, OnChanRegistered(target_ci));

			source.Reply(_("All settings from \002%s\002 have been cloned to \002%s\002"), channel.c_str(), target.c_str());
		}
		else if (what.equals_ci("ACCESS"))
		{
			for (unsigned i = 0; i < ci->GetAccessCount(); ++i)
			{
				ChanAccess *taccess = ci->GetAccess(i);
				AccessProvider *provider = taccess->provider;

				ChanAccess *newaccess = provider->Create();
				newaccess->ci = target_ci;
				newaccess->mask = taccess->mask;
				newaccess->creator = taccess->creator;
				newaccess->last_seen = taccess->last_seen;
				newaccess->created = taccess->created;
				newaccess->Unserialize(taccess->Serialize());

				target_ci->AddAccess(newaccess);
			}

			source.Reply(_("All access entries from \002%s\002 have been cloned to \002%s\002"), channel.c_str(), target.c_str());
//.........这里部分代码省略.........