C++ wxList类代码示例

void wxDialogBase::OnCloseWindow(wxCloseEvent& WXUNUSED(event))
{
    // We'll send a Cancel message by default, which may close the dialog.
    // Check for looping if the Cancel event handler calls Close().

    // Note that if a cancel button and handler aren't present in the dialog,
    // nothing will happen when you close the dialog via the window manager, or
    // via Close(). We wouldn't want to destroy the dialog by default, since
    // the dialog may have been created on the stack. However, this does mean
    // that calling dialog->Close() won't delete the dialog unless the handler
    // for wxID_CANCEL does so. So use Destroy() if you want to be sure to
    // destroy the dialog. The default OnCancel (above) simply ends a modal
    // dialog, and hides a modeless dialog.

    int idCancel = GetEscapeId();
    if ( idCancel == wxID_NONE )
        return;
    if ( idCancel == wxID_ANY )
        idCancel = wxID_CANCEL;

    // VZ: this is horrible and MT-unsafe. Can't we reuse some of these global
    //     lists here? don't dare to change it now, but should be done later!
    static wxList closing;

    if ( closing.Member(this) )
        return;

    closing.Append(this);

    wxCommandEvent cancelEvent(wxEVT_COMMAND_BUTTON_CLICKED, idCancel);
    cancelEvent.SetEventObject( this );
    GetEventHandler()->ProcessEvent(cancelEvent); // This may close the dialog

    closing.DeleteObject(this);
}

void wxDialogBase::OnCloseWindow(wxCloseEvent& WXUNUSED(event))
{
    // We'll send a Cancel message by default, which may close the dialog.

    // Check for looping if the Cancel event handler calls Close().
    //
    // VZ: this is horrible and MT-unsafe. Can't we reuse some of these global
    //     lists here? don't dare to change it now, but should be done later!
    static wxList closing;

    if ( closing.Member(this) )
        return;

    closing.Append(this);

    if ( !SendCloseButtonClickEvent() )
    {
        // If the handler didn't close the dialog (e.g. because there is no
        // button with matching id) we still want to close it when the user
        // clicks the "x" button in the title bar, otherwise we shouldn't even
        // have put it there.
        //
        // Notice that using wxID_CLOSE might have been a better choice but we
        // use wxID_CANCEL for compatibility reasons.
        EndDialog(wxID_CANCEL);
    }

    closing.DeleteObject(this);
}

void wxDialogBase::OnCloseWindow(wxCloseEvent& WXUNUSED(event))
{
    // We'll send a Cancel message by default, which may close the dialog.

    // Check for looping if the Cancel event handler calls Close().
    //
    // VZ: this is horrible and MT-unsafe. Can't we reuse some of these global
    //     lists here? don't dare to change it now, but should be done later!
    static wxList closing;

    if ( closing.Member(this) )
        return;

    closing.Append(this);

    // When a previously hidden (necessarily modeless) dialog is being closed,
    // we must not perform the usual validation and data transfer steps as they
    // had been already done when it was hidden and doing it again now would be
    // unexpected and could result in e.g. the dialog asking for confirmation
    // before discarding the changes being shown again, which doesn't make
    // sense as the dialog is not being closed in response to any user action.
    if ( !IsShown() || !SendCloseButtonClickEvent() )
    {
        // If the handler didn't close the dialog (e.g. because there is no
        // button with matching id) we still want to close it when the user
        // clicks the "x" button in the title bar, otherwise we shouldn't even
        // have put it there.
        //
        // Notice that using wxID_CLOSE might have been a better choice but we
        // use wxID_CANCEL for compatibility reasons.
        EndDialog(wxID_CANCEL);
    }

    closing.DeleteObject(this);
}

void csDiagramView::DoCut(wxList& shapes)
{
    csDiagramDocument *doc = (csDiagramDocument *)GetDocument();

    if (shapes.GetCount() > 0)
    {
        csDiagramCommand* cmd = new csDiagramCommand(_T("Cut"), doc);

        wxObjectList::compatibility_iterator node = shapes.GetFirst();
        while (node)
        {
            wxShape *theShape = (wxShape*) node->GetData();
            csCommandState* state = new csCommandState(ID_CS_CUT, NULL, theShape);

            // Insert lines at the front, so they are cut first.
            // Otherwise we may try to remove a shape with a line still
            // attached.
            if (theShape->IsKindOf(CLASSINFO(wxLineShape)))
                cmd->InsertState(state);
            else
                cmd->AddState(state);

            node = node->GetNext();
        }
        cmd->RemoveLines(); // Schedule any connected lines, not already mentioned,
                            // to be removed first

        doc->GetCommandProcessor()->Submit(cmd);
    }
}

static void ClearSplineList()
{
      wxList::compatibility_iterator node = ocpn_wx_spline_point_list.GetFirst();
      while (node)
      {
            wxPoint *point = (wxPoint *)node->GetData();
            delete point;
            ocpn_wx_spline_point_list.Erase(node);
            node = ocpn_wx_spline_point_list.GetFirst();
      }
}

static void wx_spline_draw_point_array(wxDCBase *dc)
{
  dc->DrawLines(&wx_spline_point_list, 0, 0 );
  wxList::compatibility_iterator node = wx_spline_point_list.GetFirst();
  while (node)
  {
    wxPoint *point = (wxPoint *)node->GetData();
    delete point;
    wx_spline_point_list.Erase(node);
    node = wx_spline_point_list.GetFirst();
  }
}

void GarbageCollector::DestroyItemList( wxList& lst )
{
    wxNode* pNode = lst.GetFirst();

    while( pNode )
    {
        delete &node_to_item( pNode );

        pNode = pNode->GetNext();
    }

    lst.Clear();
}

void wxFontRefData::ClearX11Fonts()
{
#if wxUSE_UNICODE
#else
    wxList::compatibility_iterator node = m_fonts.GetFirst();
    while (node)
    {
        wxXFont* f = (wxXFont*) node->GetData();
        delete f;
        node = node->GetNext();
    }
    m_fonts.Clear();
#endif
}

/// Remove a style
bool wxRichTextStyleSheet::RemoveStyle(wxList& list, wxRichTextStyleDefinition* def, bool deleteStyle)
{
    wxList::compatibility_iterator node = list.Find(def);
    if (node)
    {
        wxRichTextStyleDefinition* def = (wxRichTextStyleDefinition*) node->GetData();
        list.Erase(node);
        if (deleteStyle)
            delete def;
        return true;
    }
    else
        return false;
}

void wxTreeLayoutStored::GetChildren(long id, wxList& list)
{
    long currentId = GetTopNode();
    while (currentId != wxID_ANY)
    {
        if (id == GetNodeParent(currentId))
            list.Append((wxObject *)currentId);
        currentId = GetNextNode(currentId);
    }
}

void wxFontRefData::ClearX11Fonts()
{
#if wxUSE_UNICODE
#else
    wxList::compatibility_iterator node = m_fonts.GetFirst();
#if defined(__INTEL_COMPILER) && 1 /* VDM auto patch */
#   pragma ivdep
#   pragma swp
#   pragma unroll
#   pragma prefetch
#   if 0
#       pragma simd noassert
#   endif
#endif /* VDM auto patch */
    while (node)
    {
        wxXFont* f = (wxXFont*) node->GetData();
        delete f;
        node = node->GetNext();
    }
    m_fonts.Clear();
#endif
}

void csDiagramView::FindSelectedShapes(wxList& selections, wxClassInfo* toFind)
{
  csDiagramDocument *doc = (csDiagramDocument *)GetDocument();
  wxObjectList::compatibility_iterator node = doc->GetDiagram()->GetShapeList()->GetFirst();
  while (node)
  {
    wxShape *eachShape = (wxShape *)node->GetData();
    if ((eachShape->GetParent() == NULL) && !eachShape->IsKindOf(CLASSINFO(wxLabelShape)) && eachShape->Selected() && ((toFind == NULL) || (eachShape->IsKindOf(toFind))))
    {
      selections.Append(eachShape);
    }
    node = node->GetNext();
  }
}

void wxDialog::SetModal(bool flag)
{
   if ( flag )
       wxModelessWindows.DeleteObject(this);
   else
       wxModelessWindows.Append(this);
}

void MyFrame::OnClose(wxCloseEvent& event)
{
    if ( !event.CanVeto() )
    {
        event.Skip();
        return ;
    }
    if ( m_children.GetCount () < 1 )
    {
        event.Skip();
        return ;
    }
    // now try the children
    wxObjectList::compatibility_iterator pNode = m_children.GetFirst ();
    wxObjectList::compatibility_iterator pNext ;
    MyChild * pChild ;
    while ( pNode )
    {
        pNext = pNode -> GetNext ();
        pChild = (MyChild*) pNode -> GetData ();
        if (pChild -> Close ())
        {
            m_children.Erase(pNode) ;
        }
        else
        {
            event.Veto();
            return;
        }
        pNode = pNext ;
    }
    event.Skip();
}

void wxTopLevelWindowMotif::PreDestroy()
{
#ifdef __VMS
#pragma message disable codcauunr
#endif
   if ( (GetWindowStyleFlag() & wxDIALOG_MODAL) != wxDIALOG_MODAL )
        wxModelessWindows.DeleteObject(this);
#ifdef __VMS
#pragma message enable codcauunr
#endif

    m_icons.m_icons.Empty();

    DestroyChildren();

    // MessageDialog and FileDialog do not have a client widget
    if( GetClientWidget() )
    {
        XtRemoveEventHandler( (Widget)GetClientWidget(),
                              ButtonPressMask | ButtonReleaseMask |
                              PointerMotionMask | KeyPressMask,
                              False,
                              wxTLWEventHandler,
                              (XtPointer)this );
    }
}