C++ csRef::GetHeight方法代码示例

void G2DTestSystemDriver::WriteCentered (int mode, int dy, int fg, int bg,
  const char *format, ...)
{
  if (!font) return;

  csString text;
  va_list arg;

  va_start (arg, format);
  text.FormatV (format, arg);
  va_end (arg);

  int fw, fh;
  font->GetDimensions (text, fw, fh);

  int x = (myG2D->GetWidth () - fw) / 2;
  int y = 0;

  switch (mode)
  {
    case 0: // centered by Y
      y = dy + myG2D->GetHeight () / 2;
      break;
    case 1: // from top
      y = dy;
      break;
    case 2: // from bottom
      y = dy + (myG2D->GetHeight () - 1 - fh);
      break;
  }

  myG2D->Write (font, x, y + fh - font->GetDescent(), fg, bg, text, 
    CS_WRITE_BASELINE);
}

void G2DTestSystemDriver::BlitTest ()
{
  int w = myG2D->GetWidth ();
  int h = myG2D->GetHeight ();
  myG2D->SetClipRect(0,0,w,h);
  myG2D->DrawBox(0,0,w,h, dsteel);
  
  SetFont (fontItalic);
  WriteCentered (0,-16*8, white, -1, "BLIT() TEST");

  SetFont (fontLarge);
  WriteCentered (0,-16*7, black, dsteel, "This will test whether iGraphics2D->Blit() works correctly");
  WriteCentered (0,-16*6, black, dsteel, "on this canvas.");

  WriteCentered (0,-16*4, black, dsteel, "You should see an image of an arrow and the word %s.",
		 CS::Quote::Double ("up"));
  WriteCentered (0,-16*3, black, dsteel, "It is surrounded by a green rectangle, and the image");
  WriteCentered (0,-16*2, black, dsteel, "itself has a black border. No red should be visible");
  WriteCentered (0,-16*1, black, dsteel, "and the border has to be complete, too.");

  if (blitTestImage.IsValid ())
  {
    const int imW = blitTestImage->GetWidth ();
    const int imH = blitTestImage->GetHeight ();
    const int bx = (w - imW) / 2;
    const int by = h / 2;
    DrawClipRect (bx, by, imW + 1, imH + 1);
    myG2D->Blit (bx + 1, by + 1, imW, imH, 
      (unsigned char*)blitTestImage->GetImageData ());
  }
}

void G2DTestSystemDriver::PixelClipTest ()
{
  int w = myG2D->GetWidth ();
  int h = myG2D->GetHeight ();
  int sx = w/4, sy = h / 2 + 60, sw = w/2, sh = h / 4 - 60;
  myG2D->SetClipRect(0,0,w,h);
  myG2D->DrawBox(0,0,w,h, dsteel);
  


  SetFont (fontItalic);
  WriteCentered (0,16*-12, white, -1, "PIXEL CLIP TEST");

  SetFont (fontLarge);
  WriteCentered (0,16*-10,  black, dsteel, "This will test if pixel clipping is being done properly");
  
  WriteCentered (0,16*-8,   black, dsteel, "For each of the following clip tests we will be drawing");
  WriteCentered (0,16*-7,   black, dsteel, "a 1 pixel wide green rectangle with a 1 pixel wide red rectangle");
  WriteCentered (0,16*-6,   black, dsteel, "inside of it.");

  WriteCentered (0,16*-4,   black, dsteel, "The clipping rectangle has been set so the red rectangle is");
  WriteCentered (0,16*-3,   black, dsteel, "inside the clipping region. If any of the lines of the red rectangle");
  WriteCentered (0,16*-2,   black, dsteel, "are solid (not drawn over) then the clipping region is cutting off too much");
  
  WriteCentered (0,16*0,   black, dsteel, "The green rectangle is outside the clipping region. If any of the lines");
  WriteCentered (0,16*1,   black, dsteel, "of the green rectangle are being drawn over then the clipping region is");
  WriteCentered (0,16*2,   black, dsteel, "not clipping enough.");
  

  SetFont (fontCourier);

  DrawClipRect(sx, sy, sw, sh);

  myG2D->SetClipRect(sx + 1, sy + 1, sx + sw, sy + sh);
  

  // Test random pixel drawing
  csRandomGen rng (csGetTicks ());
  csTicks start_time = csGetTicks (), delta_time;


  // widen the range where we try to draw pixels
  sx -= 10;
  sy -= 10;
  sw += 20;
  sh += 20;

  do
  {
	int i;
    for (i = 0; i < 1000; i++)
    {
      int x = int(sx + rng.Get () * sw);
      int y = int(sy + rng.Get () * sh);
      myG2D->DrawPixel(x,y,black);
    }
    delta_time = csGetTicks () - start_time;
  } while (delta_time < 100);
}

void G2DTestSystemDriver::DrawWindowResizeScreen ()
{
  DrawWindowScreen ();

  myG2D->AllowResize (true);
  myG2D->DrawBox (0, myG2D->GetHeight () / 2 + 16, myG2D->GetWidth (), 16 * 4, blue);
  SetFont (fontLarge);

  WriteCentered (0, 16*1, white, -1, "Now resizing should be enabled. Try to resize the");
  WriteCentered (0, 16*2, white, -1, "window: you should be either unable to do it (if");
  WriteCentered (0, 16*3, white, -1, "canvas driver does not support resize) or see");
  WriteCentered (0, 16*4, white, -1, "the current window size in top-right corner.");

  SetFont (fontCourier);
  WriteCentered (2, 0, green, -1, "press any key to continue");
}

 LayerSampler (int basemap_w, int basemap_h, MaterialLayer* layer)
  : textureScale (layer->texture_scale)
 {
   float layer_needed_x = float (basemap_w) / textureScale.x;
   float layer_needed_y = float (basemap_h) / textureScale.y;
   iImage* layerImage = layer->GetImage();
   int mip_x = csFindNearestPowerOf2 (
     int (ceil (layerImage->GetWidth() / layer_needed_x)));
   int mip_y = csFindNearestPowerOf2 (
     int (ceil (layerImage->GetHeight() / layer_needed_y)));
   int mip = csMax (
     csClamp (csLog2 (mip_x), csLog2 (layerImage->GetWidth()), 0),
     csClamp (csLog2 (mip_y), csLog2 (layerImage->GetHeight()), 0));
   img = GetImageMip (layerImage, mip);
   img_w = img->GetWidth();
   img_h = img->GetHeight();
 }

void G2DTestSystemDriver::ResizeContext ()
{
  if (!myG2D->BeginDraw ())
    return;

  myG2D->Clear (black);
  DrawWindowResizeScreen ();

  csString text;
  text.Format ("Canvas [%d x %d]", myG2D->GetWidth (), myG2D->GetHeight ());
  SetFont (fontLarge);
  int fw, fh;
  font->GetDimensions (text, fw, fh);
  int x = myG2D->GetWidth () - fw;
  myG2D->Write (font, x, 0, red, -1, text);

  myG2D->FinishDraw ();
  myG2D->Print (0);
}