C++ cNoise类代码示例

void GetDarkoakTreeImage(int a_BlockX, int a_BlockY, int a_BlockZ, cNoise & a_Noise, int a_Seq, sSetBlockVector & a_LogBlocks, sSetBlockVector & a_OtherBlocks)
{
	// Pick a height
	int Height = 5 + (a_Noise.IntNoise3DInt(a_BlockX + 32 * a_Seq, a_BlockY, a_BlockZ + 32 * a_Seq) / 11) % 4;

	// Create the trunk
	for (int i = 0; i < Height; i++)
	{
		a_LogBlocks.push_back(sSetBlock(a_BlockX, a_BlockY + i, a_BlockZ, E_BLOCK_NEW_LOG, E_META_NEW_LOG_DARK_OAK_WOOD));
		a_LogBlocks.push_back(sSetBlock(a_BlockX + 1, a_BlockY + i, a_BlockZ, E_BLOCK_NEW_LOG, E_META_NEW_LOG_DARK_OAK_WOOD));
		a_LogBlocks.push_back(sSetBlock(a_BlockX, a_BlockY + i, a_BlockZ + 1, E_BLOCK_NEW_LOG, E_META_NEW_LOG_DARK_OAK_WOOD));
		a_LogBlocks.push_back(sSetBlock(a_BlockX + 1, a_BlockY + i, a_BlockZ + 1, E_BLOCK_NEW_LOG, E_META_NEW_LOG_DARK_OAK_WOOD));
	}

	// Create branches
	for (int i = 0; i < 3; i++)
	{
		int x = (a_Noise.IntNoise3DInt(a_BlockX + 32 * a_Seq, a_BlockY * i, a_BlockZ + 32 * a_Seq) % 3) - 1;
		int z = (a_Noise.IntNoise3DInt(a_BlockX - 32 * a_Seq, a_BlockY * i, a_BlockZ - 32 * a_Seq) % 3) - 1;

		// The branches would end up in the trunk.
		if ((x >= a_BlockX) && (x <= a_BlockX + 1) && (z >= a_BlockZ) && (z <= a_BlockZ + 1))
		{
			NOISE_DATATYPE Val1 = a_Noise.IntNoise2D(x, z);
			if (Val1 < 0)
			{
				x = a_BlockX + ((Val1 < -0.5) ? -1 : 3);
			}
			else
			{
				z = a_BlockZ + ((Val1 < 0.5) ? -1 : 3);
			}
		}

		int y = Height - (a_Noise.IntNoise3DInt(a_BlockX + x, a_BlockY * i, a_BlockZ - z) % (Height - (Height / 4)));

		for (int Y = y; Y < Height; Y++)
		{
			a_LogBlocks.push_back(sSetBlock(a_BlockX + x, a_BlockY + Y, a_BlockZ + z, E_BLOCK_NEW_LOG, E_META_NEW_LOG_DARK_OAK_WOOD));
		}
	}

	int hei = a_BlockY + Height - 2;

	// The lower two leaves layers are BigO4 with log in the middle and possibly corners:
	for (int i = 0; i < 2; i++)
	{
		PushCoordBlocks(a_BlockX, hei, a_BlockZ, a_OtherBlocks, BigO4, ARRAYCOUNT(BigO4), E_BLOCK_NEW_LEAVES, E_META_NEW_LEAVES_DARK_OAK_WOOD);
		PushCornerBlocks(a_BlockX, hei, a_BlockZ, a_Seq, a_Noise, 0x5fffffff, a_OtherBlocks, 3, E_BLOCK_NEW_LEAVES, E_META_NEW_LEAVES_DARK_OAK_WOOD);
		hei++;
	}  // for i < 2

	// The top leaves layer is a BigO3 with leaves in the middle and possibly corners:
	PushCoordBlocks(a_BlockX, hei, a_BlockZ, a_OtherBlocks, BigO3, ARRAYCOUNT(BigO3), E_BLOCK_NEW_LEAVES, E_META_NEW_LEAVES_DARK_OAK_WOOD);
	PushCornerBlocks(a_BlockX, hei, a_BlockZ, a_Seq, a_Noise, 0x5fffffff, a_OtherBlocks, 3, E_BLOCK_NEW_LEAVES, E_META_NEW_LEAVES_DARK_OAK_WOOD);
	a_OtherBlocks.push_back(sSetBlock(a_BlockX, hei, a_BlockZ, E_BLOCK_NEW_LEAVES, E_META_NEW_LEAVES_DARK_OAK_WOOD));
}

void GetBirchTreeImage(int a_BlockX, int a_BlockY, int a_BlockZ, cNoise & a_Noise, int a_Seq, sSetBlockVector & a_LogBlocks, sSetBlockVector & a_OtherBlocks)
{
	int Height = 5 + (a_Noise.IntNoise3DInt(a_BlockX + 64 * a_Seq, a_BlockY, a_BlockZ) % 3);
	
	// Prealloc, so that we don't realloc too often later:
	a_LogBlocks.reserve(Height);
	a_OtherBlocks.reserve(80);
	
	// The entire trunk, out of logs:
	for (int i = Height - 1; i >= 0; --i)
	{
		a_LogBlocks.push_back(sSetBlock(a_BlockX, a_BlockY + i, a_BlockZ, E_BLOCK_LOG, E_META_LOG_BIRCH));
	}
	int h = a_BlockY + Height;
	
	// Top layer - just the Plus:
	PushCoordBlocks(a_BlockX, h, a_BlockZ, a_OtherBlocks, BigO1, ARRAYCOUNT(BigO1), E_BLOCK_LEAVES, E_META_LEAVES_BIRCH);
	a_OtherBlocks.push_back(sSetBlock(a_BlockX, h, a_BlockZ, E_BLOCK_LEAVES, E_META_LEAVES_BIRCH));  // There's no log at this layer
	h--;
	
	// Second layer - log, Plus and maybe Corners:
	PushCoordBlocks (a_BlockX, h, a_BlockZ, a_OtherBlocks, BigO1, ARRAYCOUNT(BigO1), E_BLOCK_LEAVES, E_META_LEAVES_BIRCH);
	PushCornerBlocks(a_BlockX, h, a_BlockZ, a_Seq, a_Noise, 0x5fffffff, a_OtherBlocks, 1, E_BLOCK_LEAVES, E_META_LEAVES_BIRCH);
	h--;
	
	// Third and fourth layers - BigO2 and maybe 2*Corners:
	for (int Row = 0; Row < 2; Row++)
	{
		PushCoordBlocks (a_BlockX, h, a_BlockZ, a_OtherBlocks, BigO2, ARRAYCOUNT(BigO2), E_BLOCK_LEAVES, E_META_LEAVES_BIRCH);
		PushCornerBlocks(a_BlockX, h, a_BlockZ, a_Seq, a_Noise, 0x3fffffff + Row * 0x10000000, a_OtherBlocks, 2, E_BLOCK_LEAVES, E_META_LEAVES_BIRCH);
		h--;
	}  // for Row - 2*
}

void GetJungleTreeImage(int a_BlockX, int a_BlockY, int a_BlockZ, cNoise & a_Noise, int a_Seq, sSetBlockVector & a_LogBlocks, sSetBlockVector & a_OtherBlocks)
{
	if (a_Noise.IntNoise3DInt(a_BlockX + 32 * a_Seq, a_BlockY + 32 * a_Seq, a_BlockZ) < 0x60000000)
	{
		GetSmallJungleTreeImage(a_BlockX, a_BlockY, a_BlockZ, a_Noise, a_Seq, a_LogBlocks, a_OtherBlocks);
	}
	else
	{
		GetLargeJungleTreeImage(a_BlockX, a_BlockY, a_BlockZ, a_Noise, a_Seq, a_LogBlocks, a_OtherBlocks);
	}
}

static float GetMarbleNoise( float x, float y, float z, cNoise & a_Noise )
{
	static const float PI_2 = 1.57079633f;
	float oct1 = (a_Noise.CubicNoise3D(x * 0.1f, y * 0.1f, z * 0.1f )) * 4;

	oct1 = oct1 * oct1 * oct1;
	if (oct1 < 0.f)  oct1 = PI_2;
	if (oct1 > PI_2) oct1 = PI_2;

	return oct1;
}

cStructGenWormNestCaves::cCaveSystem::cCaveSystem(int a_GridX, int a_GridZ, int a_OriginX, int a_OriginZ, int a_MaxOffset, int a_Size, cNoise & a_Noise) :
	super(a_GridX, a_GridZ, a_OriginX, a_OriginZ),
	m_Size(a_Size)
{
	int Num = 1 + a_Noise.IntNoise2DInt(a_OriginX, a_OriginZ) % 3;
	for (int i = 0; i < Num; i++)
	{
		int OriginX = a_OriginX + (a_Noise.IntNoise3DInt(13 * a_OriginX, 17 * a_OriginZ, 11 * i) / 19) % a_MaxOffset;
		int OriginZ = a_OriginZ + (a_Noise.IntNoise3DInt(17 * a_OriginX, 13 * a_OriginZ, 11 * i) / 23) % a_MaxOffset;
		int OriginY  = 20 + (a_Noise.IntNoise3DInt(19 * a_OriginX, 13 * a_OriginZ, 11 * i) / 17) % 20;

		// Generate three branches from the origin point:
		// The tunnels generated depend on X, Y, Z and Branches,
		// for the same set of numbers it generates the same offsets!
		// That's why we add a +1 to X in the third line
		GenerateTunnelsFromPoint(OriginX,     OriginY, OriginZ, a_Noise, 3);
		GenerateTunnelsFromPoint(OriginX,     OriginY, OriginZ, a_Noise, 2);
		GenerateTunnelsFromPoint(OriginX + 1, OriginY, OriginZ, a_Noise, 3);
	}
}

void GetConiferTreeImage(int a_BlockX, int a_BlockY, int a_BlockZ, cNoise & a_Noise, int a_Seq, sSetBlockVector & a_LogBlocks, sSetBlockVector & a_OtherBlocks)
{
	// Half chance for a spruce, half for a pine:
	if (a_Noise.IntNoise3DInt(a_BlockX + 64 * a_Seq, a_BlockY, a_BlockZ + 32 * a_Seq) < 0x40000000)
	{
		GetSpruceTreeImage(a_BlockX, a_BlockY, a_BlockZ, a_Noise, a_Seq, a_LogBlocks, a_OtherBlocks);
	}
	else
	{
		GetPineTreeImage(a_BlockX, a_BlockY, a_BlockZ, a_Noise, a_Seq, a_LogBlocks, a_OtherBlocks);
	}
}

void cStructGenWormNestCaves::cCaveSystem::GenerateTunnelsFromPoint(
	int a_OriginX, int a_OriginY, int a_OriginZ,
	cNoise & a_Noise, int a_NumSegments
)
{
	int DoubleSize = m_Size * 2;
	int Radius = GetRadius(a_Noise, a_OriginX + a_OriginY, a_OriginY + a_OriginZ, a_OriginZ + a_OriginX);
	for (int i = a_NumSegments - 1; i >= 0; --i)
	{
		int EndX = a_OriginX + (((a_Noise.IntNoise3DInt(a_OriginX, a_OriginY, a_OriginZ + 11 * a_NumSegments) / 7) % DoubleSize) - m_Size) / 2;
		int EndY = a_OriginY + (((a_Noise.IntNoise3DInt(a_OriginY, 13 * a_NumSegments, a_OriginZ + a_OriginX) / 7) % DoubleSize) - m_Size) / 4;
		int EndZ = a_OriginZ + (((a_Noise.IntNoise3DInt(a_OriginZ + 17 * a_NumSegments, a_OriginX, a_OriginY) / 7) % DoubleSize) - m_Size) / 2;
		int EndR = GetRadius(a_Noise, a_OriginX + 7 * i, a_OriginY + 11 * i, a_OriginZ + a_OriginX);
		m_Tunnels.push_back(new cCaveTunnel(a_OriginX, a_OriginY, a_OriginZ, Radius, EndX, EndY, EndZ, EndR, a_Noise));
		GenerateTunnelsFromPoint(EndX, EndY, EndZ, a_Noise, i);
		a_OriginX = EndX;
		a_OriginY = EndY;
		a_OriginZ = EndZ;
		Radius = EndR;
	}  // for i - a_NumSegments
}

inline void PushCornerBlocks(int a_BlockX, int a_Height, int a_BlockZ, int a_Seq, cNoise & a_Noise, int a_Chance, sSetBlockVector & a_Blocks, int a_CornersDist, BLOCKTYPE a_BlockType, NIBBLETYPE a_Meta)
{
	for (size_t i = 0; i < ARRAYCOUNT(Corners); i++)
	{
		int x = a_BlockX + Corners[i].x;
		int z = a_BlockZ + Corners[i].z;
		if (a_Noise.IntNoise3DInt(x + 64 * a_Seq, a_Height, z + 64 * a_Seq) <= a_Chance)
		{
			a_Blocks.push_back(sSetBlock(x, a_Height, z, a_BlockType, a_Meta));
		}
	}  // for i - Corners[]
}

void GetSmallJungleTreeImage(int a_BlockX, int a_BlockY, int a_BlockZ, cNoise & a_Noise, int a_Seq, sSetBlockVector & a_LogBlocks, sSetBlockVector & a_OtherBlocks)
{
	// Vines are around the BigO3, but not in the corners; need proper meta for direction
	static const sMetaCoords Vines[] =
	{
		{-2, -4, 1}, {-1, -4, 1}, {0, -4, 1}, {1, -4, 1}, {2, -4, 1},  // North face
		{-2,  4, 4}, {-1,  4, 4}, {0,  4, 4}, {1,  4, 4}, {2,  4, 4},  // South face
		{4,  -2, 2}, {4,  -1, 2}, {4,  0, 2}, {4,  1, 2}, {4,  2, 2},  // East face
		{-4, -2, 8}, {-4, -1, 8}, {-4, 0, 8}, {-4, 1, 8},              // West face
		// TODO: proper metas and height: {0,  1, 1},  {0, -1, 4},  {-1, 0, 2}, {1,  1, 8},  // Around the tunk
	} ;

	int Height = 7 + (a_Noise.IntNoise3DInt(a_BlockX + 5 * a_Seq, a_BlockY, a_BlockZ + 5 * a_Seq) / 5) % 3;
	
	a_LogBlocks.reserve(Height);
	a_OtherBlocks.reserve(
		2 * ARRAYCOUNT(BigO3) +      // O3 layer, 2x
		2 * ARRAYCOUNT(BigO2) +      // O2 layer, 2x
		ARRAYCOUNT(BigO1) + 1 +      // Plus on the top
		Height * ARRAYCOUNT(Vines) + // Vines
		50  // some safety
	);
	
	for (int i = 0; i < Height; i++)
	{
		a_LogBlocks.push_back(sSetBlock(a_BlockX, a_BlockY + i, a_BlockZ, E_BLOCK_LOG, E_META_LOG_JUNGLE));
	}
	int hei = a_BlockY + Height - 3;
	
	// Put vines around the lowermost leaves layer:
	PushSomeColumns(a_BlockX, hei, a_BlockZ, Height, a_Seq, a_Noise, 0x3fffffff, a_OtherBlocks, Vines, ARRAYCOUNT(Vines), E_BLOCK_VINES);
	
	// The lower two leaves layers are BigO3 with log in the middle and possibly corners:
	for (int i = 0; i < 2; i++)
	{
		PushCoordBlocks(a_BlockX, hei, a_BlockZ, a_OtherBlocks, BigO3, ARRAYCOUNT(BigO3), E_BLOCK_LEAVES, E_META_LEAVES_JUNGLE);
		PushCornerBlocks(a_BlockX, hei, a_BlockZ, a_Seq, a_Noise, 0x5fffffff, a_OtherBlocks, 3, E_BLOCK_LEAVES, E_META_LEAVES_JUNGLE);
		hei++;
	}  // for i - 2*

	// Two layers of BigO2 leaves, possibly with corners:
	for (int i = 0; i < 1; i++)
	{
		PushCoordBlocks(a_BlockX, hei, a_BlockZ, a_OtherBlocks, BigO2, ARRAYCOUNT(BigO2), E_BLOCK_LEAVES, E_META_LEAVES_JUNGLE);
		PushCornerBlocks(a_BlockX, hei, a_BlockZ, a_Seq, a_Noise, 0x5fffffff, a_OtherBlocks, 2, E_BLOCK_LEAVES, E_META_LEAVES_JUNGLE);
		hei++;
	}  // for i - 2*
	
	// Top plus, all leaves:
	PushCoordBlocks(a_BlockX, hei, a_BlockZ, a_OtherBlocks, BigO1, ARRAYCOUNT(BigO1), E_BLOCK_LEAVES, E_META_LEAVES_JUNGLE);
	a_OtherBlocks.push_back(sSetBlock(a_BlockX, hei, a_BlockZ, E_BLOCK_LEAVES, E_META_LEAVES_JUNGLE));
}

void cStructGenRavines::cRavine::GenerateBaseDefPoints(int a_BlockX, int a_BlockZ, int a_Size, cNoise & a_Noise)
{
	// Modify the size slightly to have different-sized ravines (1 / 2 to 1 / 1 of a_Size):
	a_Size = (512 + ((a_Noise.IntNoise3DInt(19 * a_BlockX, 11 * a_BlockZ, a_BlockX + a_BlockZ) / 17) % 512)) * a_Size / 1024;

	// The complete offset of the ravine from its cellpoint, up to 2 * a_Size in each direction
	int OffsetX = (((a_Noise.IntNoise3DInt(50 * a_BlockX, 30 * a_BlockZ, 0)    / 9) % (2 * a_Size)) + ((a_Noise.IntNoise3DInt(30 * a_BlockX, 50 * a_BlockZ, 1000) / 7) % (2 * a_Size)) - 2 * a_Size) / 2;
	int OffsetZ = (((a_Noise.IntNoise3DInt(50 * a_BlockX, 30 * a_BlockZ, 2000) / 7) % (2 * a_Size)) + ((a_Noise.IntNoise3DInt(30 * a_BlockX, 50 * a_BlockZ, 3000) / 9) % (2 * a_Size)) - 2 * a_Size) / 2;
	int CenterX = a_BlockX + OffsetX;
	int CenterZ = a_BlockZ + OffsetZ;

	// Get the base angle in which the ravine "axis" goes:
	float Angle = static_cast<float>((static_cast<float>((a_Noise.IntNoise3DInt(20 * a_BlockX, 70 * a_BlockZ, 6000) / 9) % 16384)) / 16384.0 * M_PI);
	float xc = sinf(Angle);
	float zc = cosf(Angle);

	// Calculate the definition points and radii:
	int MaxRadius = static_cast<int>(sqrt(12.0 + ((a_Noise.IntNoise2DInt(61 * a_BlockX, 97 * a_BlockZ) / 13) % a_Size) / 16));
	int Top       = 32 + ((a_Noise.IntNoise2DInt(13 * a_BlockX, 17 * a_BlockZ) / 23) % 32);
	int Bottom    = 5 + ((a_Noise.IntNoise2DInt(17 * a_BlockX, 29 * a_BlockZ) / 13) % 32);
	int Mid = (Top + Bottom) / 2;
	int DefinitionPointX = CenterX - static_cast<int>(xc * a_Size / 2);
	int DefinitionPointZ = CenterZ - static_cast<int>(zc * a_Size / 2);
	m_Points.push_back(cRavDefPoint(DefinitionPointX, DefinitionPointZ, 0, (Mid + Top) / 2, (Mid + Bottom) / 2));
	for (int i = 1; i < NUM_RAVINE_POINTS - 1; i++)
	{
		int LineX = CenterX + static_cast<int>(xc * a_Size * (i - NUM_RAVINE_POINTS / 2) / NUM_RAVINE_POINTS);
		int LineZ = CenterZ + static_cast<int>(zc * a_Size * (i - NUM_RAVINE_POINTS / 2) / NUM_RAVINE_POINTS);
		// Amplitude is the amount of blocks that this point is away from the ravine "axis"
		int Amplitude = (a_Noise.IntNoise3DInt(70 * a_BlockX, 20 * a_BlockZ + 31 * i, 10000 * i) / 9) % a_Size;
		Amplitude = Amplitude / 4 - a_Size / 8;  // Amplitude is in interval [-a_Size / 4, a_Size / 4]
		int PointX = LineX + static_cast<int>(zc * Amplitude);
		int PointZ = LineZ - static_cast<int>(xc * Amplitude);
		int Radius = MaxRadius - abs(i - NUM_RAVINE_POINTS / 2);  // TODO: better radius function
		int ThisTop    = Top    + ((a_Noise.IntNoise3DInt(7 *  a_BlockX, 19 * a_BlockZ, i * 31) / 13) % 8) - 4;
		int ThisBottom = Bottom + ((a_Noise.IntNoise3DInt(19 * a_BlockX, 7 *  a_BlockZ, i * 31) / 13) % 8) - 4;
		m_Points.push_back(cRavDefPoint(PointX, PointZ, Radius, ThisTop, ThisBottom));
	}  // for i - m_Points[]
	DefinitionPointX = CenterX + static_cast<int>(xc * a_Size / 2);
	DefinitionPointZ = CenterZ + static_cast<int>(zc * a_Size / 2);
	m_Points.push_back(cRavDefPoint(DefinitionPointX, DefinitionPointZ, 0, Mid, Mid));
}

inline void PushSomeColumns(int a_BlockX, int a_Height, int a_BlockZ, int a_ColumnHeight, int a_Seq, cNoise & a_Noise, int a_Chance, sSetBlockVector & a_Blocks, const sMetaCoords * a_Coords, size_t a_NumCoords, BLOCKTYPE a_BlockType)
{
	for (size_t i = 0; i < a_NumCoords; i++)
	{
		int x = a_BlockX + a_Coords[i].x;
		int z = a_BlockZ + a_Coords[i].z;
		if (a_Noise.IntNoise3DInt(x + 64 * a_Seq, a_Height + i, z + 64 * a_Seq) <= a_Chance)
		{
			for (int j = 0; j < a_ColumnHeight; j++)
			{
				a_Blocks.push_back(sSetBlock(x, a_Height - j, z, a_BlockType, a_Coords[i].Meta));
			}
		}
	}  // for i - a_Coords[]
}

void GetPineTreeImage(int a_BlockX, int a_BlockY, int a_BlockZ, cNoise & a_Noise, int a_Seq, sSetBlockVector & a_LogBlocks, sSetBlockVector & a_OtherBlocks)
{
	// Tall, little leaves on top. The top leaves are arranged in a shape of two cones joined by their bases.
	// There can be one or two layers representing the cone bases (SameSizeMax)
	
	int MyRandom = a_Noise.IntNoise3DInt(a_BlockX + 32 * a_Seq, a_BlockY, a_BlockZ + 32 * a_Seq) / 8;
	int TrunkHeight = 8 + (MyRandom % 3);
	int SameSizeMax = ((MyRandom & 8) == 0) ? 1 : 0;
	MyRandom >>= 3;
	int NumLeavesLayers = 2 + (MyRandom % 3);  // Number of layers that have leaves in them
	if (NumLeavesLayers == 2)
	{
		SameSizeMax = 0;
	}
	
	// Pre-allocate the vector:
	a_LogBlocks.reserve(TrunkHeight);
	a_OtherBlocks.reserve(NumLeavesLayers * 25);

	// The entire trunk, out of logs:
	for (int i = TrunkHeight; i >= 0; --i)
	{
		a_LogBlocks.push_back(sSetBlock(a_BlockX, a_BlockY + i, a_BlockZ, E_BLOCK_LOG, E_META_LOG_CONIFER));
	}
	int h = a_BlockY + TrunkHeight + 2;

	// Top layer - just a single leaves block:	
	a_OtherBlocks.push_back(sSetBlock(a_BlockX, h, a_BlockZ, E_BLOCK_LEAVES, E_META_LEAVES_CONIFER));
	h--;

	// One more layer is above the trunk, push the central leaves:	
	a_OtherBlocks.push_back(sSetBlock(a_BlockX, h, a_BlockZ, E_BLOCK_LEAVES, E_META_LEAVES_CONIFER));

	// Layers expanding in size, then collapsing again:
	// LOGD("Generating %d layers of pine leaves, SameSizeMax = %d", NumLeavesLayers, SameSizeMax);
	for (int i = 0; i < NumLeavesLayers; ++i)
	{
		int LayerSize = std::min(i, NumLeavesLayers - i + SameSizeMax - 1);
		// LOGD("LayerSize %d: %d", i, LayerSize);
		if (LayerSize < 0)
		{
			break;
		}
		ASSERT(LayerSize < ARRAYCOUNT(BigOs));
		PushCoordBlocks(a_BlockX, h, a_BlockZ, a_OtherBlocks, BigOs[LayerSize].Coords, BigOs[LayerSize].Count, E_BLOCK_LEAVES, E_META_LEAVES_CONIFER);
		h--;
	}
}

int cStructGenWormNestCaves::cCaveSystem::GetRadius(cNoise & a_Noise, int a_OriginX, int a_OriginY, int a_OriginZ)
{
	// Instead of a flat distribution noise function, we need to shape it, so that most caves are smallish and only a few select are large
	int rnd = a_Noise.IntNoise3DInt(a_OriginX, a_OriginY, a_OriginZ) / 11;
	/*
	// Not good enough:
	// The algorithm of choice: emulate gauss-distribution noise by adding 3 flat noises, then fold it in half using absolute value.
	// To save on processing, use one random value and extract 3 bytes to be separately added as the gaussian noise
	int sum = (rnd & 0xff) + ((rnd >> 8) & 0xff) + ((rnd >> 16) & 0xff);
	// sum is now a gaussian-distribution noise within [0 .. 767], with center at 384.
	// We want mapping 384 -> 3, 0 -> 19, 768 -> 19, so divide by 24 to get [0 .. 31] with center at 16, then use abs() to fold around the center
	int res = 3 + abs((sum / 24) - 16);
	*/

	// Algorithm of choice: random value in the range of zero to random value - heavily towards zero
	int res = MIN_RADIUS + (rnd >> 8) % ((rnd % (MAX_RADIUS - MIN_RADIUS)) + 1);
	return res;
}

void GetLargeJungleTreeImage(int a_BlockX, int a_BlockY, int a_BlockZ, cNoise & a_Noise, int a_Seq, sSetBlockVector & a_LogBlocks, sSetBlockVector & a_OtherBlocks)
{
	// TODO: Generate proper jungle trees with branches

	// Vines are around the BigO4, but not in the corners; need proper meta for direction
	static const sMetaCoords Vines[] =
	{
		{-2, -5, 1}, {-1, -5, 1}, {0, -5, 1}, {1, -5, 1}, {2, -5, 1},  // North face
		{-2,  5, 4}, {-1,  5, 4}, {0,  5, 4}, {1,  5, 4}, {2,  5, 4},  // South face
		{5,  -2, 2}, {5,  -1, 2}, {5,  0, 2}, {5,  1, 2}, {5,  2, 2},  // East face
		{-5, -2, 8}, {-5, -1, 8}, {-5, 0, 8}, {-5, 1, 8}, {-5, 2, 8},  // West face
		// TODO: vines around the trunk, proper metas and height
	} ;
	
	int Height = 24 + (a_Noise.IntNoise3DInt(a_BlockX + 32 * a_Seq, a_BlockY, a_BlockZ + 32 * a_Seq) / 11) % 24;
	
	a_LogBlocks.reserve(Height * 4);
	a_OtherBlocks.reserve(2 * ARRAYCOUNT(BigO4) + ARRAYCOUNT(BigO3) + Height * ARRAYCOUNT(Vines) + 50);
	
	for (int i = 0; i < Height; i++)
	{
		a_LogBlocks.push_back(sSetBlock(a_BlockX,     a_BlockY + i, a_BlockZ,     E_BLOCK_LOG, E_META_LOG_JUNGLE));
		a_LogBlocks.push_back(sSetBlock(a_BlockX + 1, a_BlockY + i, a_BlockZ,     E_BLOCK_LOG, E_META_LOG_JUNGLE));
		a_LogBlocks.push_back(sSetBlock(a_BlockX,     a_BlockY + i, a_BlockZ + 1, E_BLOCK_LOG, E_META_LOG_JUNGLE));
		a_LogBlocks.push_back(sSetBlock(a_BlockX + 1, a_BlockY + i, a_BlockZ + 1, E_BLOCK_LOG, E_META_LOG_JUNGLE));
	}
	int hei = a_BlockY + Height - 2;
	
	// Put vines around the lowermost leaves layer:
	PushSomeColumns(a_BlockX, hei, a_BlockZ, Height, a_Seq, a_Noise, 0x3fffffff, a_OtherBlocks, Vines, ARRAYCOUNT(Vines), E_BLOCK_VINES);
	
	// The lower two leaves layers are BigO4 with log in the middle and possibly corners:
	for (int i = 0; i < 2; i++)
	{
		PushCoordBlocks(a_BlockX, hei, a_BlockZ, a_OtherBlocks, BigO4, ARRAYCOUNT(BigO4), E_BLOCK_LEAVES, E_META_LEAVES_JUNGLE);
		PushCornerBlocks(a_BlockX, hei, a_BlockZ, a_Seq, a_Noise, 0x5fffffff, a_OtherBlocks, 3, E_BLOCK_LEAVES, E_META_LEAVES_JUNGLE);
		hei++;
	}  // for i - 2*

	// The top leaves layer is a BigO3 with leaves in the middle and possibly corners:
	PushCoordBlocks(a_BlockX, hei, a_BlockZ, a_OtherBlocks, BigO3, ARRAYCOUNT(BigO3), E_BLOCK_LEAVES, E_META_LEAVES_JUNGLE);
	PushCornerBlocks(a_BlockX, hei, a_BlockZ, a_Seq, a_Noise, 0x5fffffff, a_OtherBlocks, 3, E_BLOCK_LEAVES, E_META_LEAVES_JUNGLE);
	a_OtherBlocks.push_back(sSetBlock(a_BlockX, hei, a_BlockZ, E_BLOCK_LEAVES, E_META_LEAVES_JUNGLE));
}

void GetSwampTreeImage(int a_BlockX, int a_BlockY, int a_BlockZ, cNoise & a_Noise, int a_Seq, sSetBlockVector & a_LogBlocks, sSetBlockVector & a_OtherBlocks)
{
	// Vines are around the BigO3, but not in the corners; need proper meta for direction
	static const sMetaCoords Vines[] =
	{
		{-2, -4, 1}, {-1, -4, 1}, {0, -4, 1}, {1, -4, 1}, {2, -4, 1},  // North face
		{-2,  4, 4}, {-1,  4, 4}, {0,  4, 4}, {1,  4, 4}, {2,  4, 4},  // South face
		{4,  -2, 2}, {4,  -1, 2}, {4,  0, 2}, {4,  1, 2}, {4,  2, 2},  // East face
		{-4, -2, 8}, {-4, -1, 8}, {-4, 0, 8}, {-4, 1, 8}, {-4, 2, 8},  // West face
	} ;

	int Height = 3 + (a_Noise.IntNoise3DInt(a_BlockX + 32 * a_Seq, a_BlockY, a_BlockZ + 32 * a_Seq) / 8) % 3;
	
	a_LogBlocks.reserve(Height);
	a_OtherBlocks.reserve(2 * ARRAYCOUNT(BigO2) + 2 * ARRAYCOUNT(BigO3) + Height * ARRAYCOUNT(Vines) + 20);
	
	for (int i = 0; i < Height; i++)
	{
		a_LogBlocks.push_back(sSetBlock(a_BlockX, a_BlockY + i, a_BlockZ, E_BLOCK_LOG, E_META_LOG_APPLE));
	}
	int hei = a_BlockY + Height - 2;
	
	// Put vines around the lowermost leaves layer:
	PushSomeColumns(a_BlockX, hei, a_BlockZ, Height, a_Seq, a_Noise, 0x3fffffff, a_OtherBlocks, Vines, ARRAYCOUNT(Vines), E_BLOCK_VINES);
	
	// The lower two leaves layers are BigO3 with log in the middle and possibly corners:
	for (int i = 0; i < 2; i++)
	{
		PushCoordBlocks(a_BlockX, hei, a_BlockZ, a_OtherBlocks, BigO3, ARRAYCOUNT(BigO3), E_BLOCK_LEAVES, E_META_LEAVES_APPLE);
		PushCornerBlocks(a_BlockX, hei, a_BlockZ, a_Seq, a_Noise, 0x5fffffff, a_OtherBlocks, 3, E_BLOCK_LEAVES, E_META_LEAVES_APPLE);
		hei++;
	}  // for i - 2*

	// The upper two leaves layers are BigO2 with leaves in the middle and possibly corners:
	for (int i = 0; i < 2; i++)
	{
		PushCoordBlocks(a_BlockX, hei, a_BlockZ, a_OtherBlocks, BigO2, ARRAYCOUNT(BigO2), E_BLOCK_LEAVES, E_META_LEAVES_APPLE);
		PushCornerBlocks(a_BlockX, hei, a_BlockZ, a_Seq, a_Noise, 0x5fffffff, a_OtherBlocks, 3, E_BLOCK_LEAVES, E_META_LEAVES_APPLE);
		a_OtherBlocks.push_back(sSetBlock(a_BlockX, hei, a_BlockZ, E_BLOCK_LEAVES, E_META_LEAVES_APPLE));
		hei++;
	}  // for i - 2*
}