本文整理汇总了C++中UTFT::print方法的典型用法代码示例。如果您正苦于以下问题:C++ UTFT::print方法的具体用法?C++ UTFT::print怎么用?C++ UTFT::print使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类UTFT
的用法示例。
在下文中一共展示了UTFT::print方法的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: endCalibration
void ECCalibrateScreen::endCalibration()
{
myUTFT.fillScr(VGA_BLUE);
myUTFT.setColor(VGA_RED);
myUTFT.fillRoundRect(80, 70, 239, 169);
myUTFT.setColor(VGA_WHITE);
myUTFT.setBackColor(VGA_RED);
myUTFT.print("! All Done !", CENTER, 93);
myUTFT.print("Touch Screen", CENTER, 119);
myUTFT.print("To Exit", CENTER, 132);
SwaitForTouch();
myUTFT.clrScr();
myUTFT.setFont(BigFont);
myButtons.enableButton( /*resetButton*/ 0);
myButtons.enableButton( /*infoButton*/ 1);
myButtons.enableButton( /*readButton*/ 2);
myButtons.enableButton( /*tempReadButton*/ 3);
myButtons.enableButton( /*stopButton*/ 4);
myButtons.enableButton( /*startButton*/ 5);
myButtons.enableButton( /*backButton*/6);
myButtons.enableButton( /*calibrateButton*/7);
SdrawScreen();
}
示例2:
//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void Screen1::doUpdate(TFTMenu* menu)
{
// тут обновляем внутреннее состояние
if (isActive())
{
DS3231Time tm = RealtimeClock.getTime();
if (oldsecond != tm.second)
{
oldsecond = tm.second;
UTFT* dc = menu->getDC();
dc->setColor(VGA_WHITE);
dc->setBackColor(VGA_BLACK);
// получаем компоненты даты в виде строк
String strDate = RealtimeClock.getDateStr(tm);
String strTime = RealtimeClock.getTimeStr(tm);
dc->setFont(SmallRusFont);
// печатаем их
dc->print(strDate, 5, 305);
dc->print(strTime, 160, 305);
//dc->printNumF(setupPin.power3V3, 1, 195, 1); //
//dc->printNumF(setupPin.power5V0, 1, 195, 15); //
//dc->printNumI(setupPin.power200, 195, 30); //
}
}
}
示例3: dryCalibration
void ECCalibrateScreen::dryCalibration()
{
myUTFT.clrScr();
myUTFT.setColor(255, 0, 0);
myUTFT.fillRect(0, 0, 220, 13);
myUTFT.setColor(255, 255, 255);
myUTFT.setBackColor(255, 0, 0);
myUTFT.drawLine(0, 14, 320, 14);
myUTFT.print("EC Calibration", CENTER, 1);
myUTFT.setBackColor(0, 0, 0);
myUTFT.print("Do NOT put sensor in any Liquid you are", LEFT, 30);
myUTFT.print("going to calibrate for a dry condition", LEFT, 42);
myUTFT.print("This is much like setting a TARE on a", LEFT, 54);
myUTFT.print("scale", LEFT, 66);
myUTFT.print("", LEFT, 78);
myUTFT.print("Please make sure that the EC sensor is", LEFT, 90);
myUTFT.print("connected to the BNC connector before", LEFT, 102);
myUTFT.print("you continue", LEFT, 114);
//myUTFT.print("crosshairs in sequence.", LEFT, 126);
myUTFT.print("Touch screen to continue", CENTER, 162);
waitForTouch();
myUTFT.clrScr();
inputstring = "Z0\r"; //Command to get info
Serial3.print(inputstring); //send command to sensor.
}
示例4: drawPrepareScreen
void PlugScreen::drawPrepareScreen()
{
Serial.println("PlugScreen::handlePlugScreen SET LIGHTS ID \n");
myUTFT.setFont(SmallFont);
myUTFT.clrScr();
myUTFT.setColor(255, 0, 0);
myUTFT.fillRect(0, 0, 220, 13);
myUTFT.setColor(255, 255, 255);
myUTFT.setBackColor(255, 0, 0);
myUTFT.drawLine(0, 14, 320, 14);
myUTFT.print("Plug Setting", CENTER, 1);
myUTFT.setBackColor(0, 0, 0);
myUTFT.print("Use the remote that came with your", LEFT, 30);
myUTFT.print("plugs to set which unit and address it", LEFT, 42);
myUTFT.print("uses.Just point the remote at the screen", LEFT, 54);
myUTFT.print("and press a button for the unit you want", LEFT, 66);
myUTFT.print("to use for the lights", LEFT, 78);
myUTFT.print("", LEFT, 90);
myUTFT.print("Please press a unit for the lights", LEFT, 102);
myUTFT.print("", LEFT, 114);
exitButton = myButtons.addButton( 10, 170, 145, 53, mainButton);
myButtons.drawButton(exitButton);
myUTFT.setBackColor (161,190,237);
myUTFT.print("Cancel", 55, 195);
myUTFT.setFont(BigFont);
}
示例5: SdrawScreen
void ECCalibrateScreen::SdrawScreen()
{
myUTFT.clrScr();
myUTFT.setBackColor(0, 0, 255);
myButtons.setButtonColors(VGA_WHITE, VGA_GRAY, VGA_BLACK, VGA_RED, VGA_BLUE);
myButtons.addButton( 10, 10, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.addButton( 160, 10, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.addButton( 10, 64, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.addButton( 160, 64, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.addButton( 10, 116, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.addButton( 160, 116, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.addButton( 10, 170, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.addButton( 160, 170, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.drawButtons();
//Add text to buttons.
myUTFT.setBackColor (161,190,237);
myUTFT.print("Reset", 55, 30);
myUTFT.print("Info", 190, 30);
myUTFT.print("Read", 55, 90);
myUTFT.print("TRead", 190, 90);
myUTFT.print("Stop", 55, 146);
myUTFT.print("Start", 190, 146);
myUTFT.print("Back", 55, 195);
myUTFT.print("Calibrate", 185, 195);
}
示例6: render
void Keyboard::render(UTFT tft) {
tft.clrScr();
tft.setFont(BigFont);
tft.setBackColor(255, 255, 255);
tft.setColor(255, 255, 255);
tft.drawRoundRect(30, 30, tft.getDisplayXSize() - 111, 70);
tft.fillRect(tft.getDisplayXSize() - 106, 30, tft.getDisplayXSize() - 66, 70);
tft.setColor(0, 0, 0);
tft.print("<-", tft.getDisplayXSize() - 102, 43);
tft.setColor(255, 255, 255);
tft.fillRect(tft.getDisplayXSize() - 61, 30, tft.getDisplayXSize() - 21, 70);
tft.setColor(0, 0, 0);
tft.print("OK", tft.getDisplayXSize() - 57, 43);
byte br = 9,
nl = 0,
offset = 1;
int x = offset,
y = 120;
for(byte j=0; j<numKeys; j++) {
tft.setColor(255, 255, 255);
tft.fillRect(x, y, x + 30, y + 30);
tft.setColor(0, 0, 0);
String str = "";
str += keys[j]; //lame!
tft.print(str, x + 7, y + 8);
x += 32;
nl++;
if(nl > br) {
offset += 15;
x = offset;
nl = 0;
y += 32;
br -= 1;
}
}
_tft = tft;
}
示例7: drawDryScreen
void drawDryScreen()
{
String version = sensorstring.substring(3,6);
String date = sensorstring.substring(7,11);
sensorstring="";
//resetButtons();
myButtons.setButtonColors(VGA_WHITE, VGA_GRAY, VGA_BLACK, VGA_RED, VGA_BLACK);
//Indicate that we have changed screens.
myUTFT.setBackColor (VGA_BLACK);
myUTFT.print("EC HW Info", CENTER, 1);
myUTFT.print("Sensor Version", CENTER, 30);
myUTFT.print(version, CENTER, 54);
myUTFT.print("Firmware Date", CENTER, 78);
myUTFT.print(date, CENTER, 102);
}
示例8: drawStoppingScreen
void ECCalibrateScreen::drawStoppingScreen()
{
myUTFT.clrScr();
resetButtons();
myButtons.setButtonColors(VGA_WHITE, VGA_GRAY, VGA_BLACK, VGA_RED, VGA_BLACK);
myUTFT.setBackColor (VGA_BLACK);
myUTFT.print("EC STOPPED", CENTER, 1);
myUTFT.print("All EC Readings", CENTER, 30);
myUTFT.print("Now Stopped", CENTER, 54);
myUTFT.print("Sensor Standby", CENTER, 78);
//Draw back button
subBackButton = myButtons.addButton( 10, 168, 145, 53, mainButton);
myButtons.drawButton(subBackButton);
myUTFT.setBackColor (161,190,237);
myUTFT.print("Back", 45, 185);
}
示例9: waitForReceiver
void PlugScreen::waitForReceiver(NewRemoteCode receivedCode)
{
//Clear What was there.
myUTFT.setFont(SmallFont);
myUTFT.clrScr();
myUTFT.setColor(255, 0, 0);
myUTFT.fillRect(0, 0, 220, 13);
myUTFT.setColor(255, 255, 255);
myUTFT.setBackColor(255, 0, 0);
myUTFT.drawLine(0, 14, 320, 14);
myUTFT.print("ID Set", CENTER, 1);
myUTFT.setBackColor(0, 0, 0);
setAddresstoEEPROM(receivedCode.address);
if(plugDevice.lights)
{
EEPROM.write(EEPROM_LEARNED_LIGHTS_UNIT,receivedCode.unit);
plugDevice.lights = false;
}
if(plugDevice.pump)
{
EEPROM.write(EEPROM_LEARNED_PUMP_UNIT,receivedCode.unit);
plugDevice.pump = false;
}
if(plugDevice.heater)
{
EEPROM.write(EEPROM_LEARNED_HEATER_UNIT,receivedCode.unit);
plugDevice.heater = false;
}
//unsigned long add = getAddress();
String sAddress(receivedCode.address);
String slightID(receivedCode.unit);
myUTFT.print("The unit has been set to unit ", LEFT, 30);
myUTFT.print(slightID, LEFT, 42);
myUTFT.print("The Transmitting Address is", LEFT, 54);
myUTFT.print(sAddress, LEFT, 66);
myUTFT.print("You can now use the plug", LEFT, 78);
myUTFT.print("**********************************", LEFT, 90);
myButtons.deleteAllButtons();
exitButton = -1;
exitButton = myButtons.addButton( 10, 170, 145, 53, mainButton);
myButtons.drawButton(exitButton);
myUTFT.setBackColor (161,190,237);
myUTFT.print("Back", 55, 195);
myUTFT.setFont(BigFont);
}
示例10: drawScreen
void PlugScreen::drawScreen( )
{
//Clear What was there.
myUTFT.clrScr();
resetButtons();
myUTFT.setBackColor (0, 0, 0);
myUTFT.print("Plug Setup", CENTER, 1);
myUTFT.setBackColor(0, 0, 255);
//Draw Lights button
lightsButton = myButtons.addButton( 10, 54, 145, 53, mainButton);
myButtons.drawButton(lightsButton);
myUTFT.print("Lights", 35, 71);
heaterButton = myButtons.addButton( 10, 110, 145, 53, mainButton);
myButtons.drawButton(heaterButton);
myUTFT.print("Heater", 35, 135);
pumpButton = myButtons.addButton( 160, 54, 145, 53, mainButton);
myButtons.drawButton(pumpButton);
myUTFT.print("Pump", 190, 71);
settingsButton = myButtons.addButton( 160, 110, 145, 53, mainButton);
myButtons.drawButton(settingsButton);
myUTFT.print("Override", 175, 135);
//Draw back button
back2SetupButton = myButtons.addButton( 10, 170, 145, 53, mainButton);
myButtons.drawButton(back2SetupButton);
myUTFT.print("Back", 55, 195);
}
示例11: drawReadingScreen
//Static so can be used with the callback.
void drawReadingScreen()
{
String EC = sensorstring.substring(0,3);
String TDS = sensorstring.substring(4,6);
String SAL = sensorstring.substring(7,8);
sensorstring="";
//resetButtons();
myButtons.setButtonColors(VGA_WHITE, VGA_GRAY, VGA_BLACK, VGA_RED, VGA_BLACK);
//Indicate that we have changed screens.
myUTFT.setBackColor (VGA_BLACK);
myUTFT.print("EC Get Reading", CENTER, 1);
myUTFT.print("EC Level", CENTER, 30);
myUTFT.print(EC, CENTER, 54);
myUTFT.print("TDS Level", CENTER, 78);
myUTFT.print(TDS, CENTER, 102);
myUTFT.print(SAL, CENTER, 126);
}
示例12: updateLowWaitScreen
void ECCalibrateScreen::updateLowWaitScreen()
{
iSeconds = iSeconds - 3;
String thisString = String(iSeconds);
myUTFT.clrScr();
myUTFT.print("Calibration in Progress", CENTER, 30);
myUTFT.print("Seconds left until ready " + thisString, CENTER, 42);
switch(iCounter){
case 0:
Serial.println("PRINT 0");
myUTFT.print("************************************", CENTER, 114);
iCounter = 1;
break;
case 1:
Serial.println("PRINT 1");
myUTFT.print("******************", CENTER, 114);
iCounter = 2;
break;
case 2:
Serial.println("PRINT 2");
myUTFT.print("*****", CENTER, 114);
iCounter = 0;
break;
}
if(iSeconds == 0){
iSeconds = max_seconds_for_calibration;
//Move to next stage.
endCalibration();
}
}
示例13: render
void Mixer::render(UTFT tft) {
tft.clrScr();
tft.setColor(255, 255, 255);
tft.fillRect(0, 0, tft.getDisplayXSize() - 1, 12);
tft.setBackColor(255, 255, 255);
tft.setColor(0, 0, 0);
tft.setFont(SmallFont);
tft.print("Mixer", 10, 0);
_tft = tft;
for(byte x=0;x<3; x++) {
renderedGains[x] = 0;
renderMute(x);
}
update();
}
示例14: getInfo
/*
* Delivering this instruction will instruct the E.C. Circuit to transmit it device info.
Full proper syntax: i<cr> or I<CR>
The E.C. Circuit will respond: E,V3.0,4/11<CR>
Where:
E =E.C. Circuit
V3.1= Firmware version
5/13= Date firmware was written
*/
void ECCalibrateScreen::getInfo()
{
inputstring = "I\r"; //Command to get info
Serial3.print(inputstring); //send command to sensor.
//Draw part of the screen here and the info when we have it.
//info comes after the loop has iterated.
myUTFT.clrScr();
resetButtons();
//Draw back button
subBackButton = myButtons.addButton( 10, 168, 145, 53, mainButton);
myButtons.drawButton(subBackButton);
myUTFT.setBackColor (161,190,237);
myUTFT.print("Back", 45, 185);
waiting_for_info = true;
}
示例15: getTempSingleReading
void ECCalibrateScreen::getTempSingleReading()
{
inputstring = ( waterTempString + "\r"); //"17.8\r"Command to get reading.
Serial3.print(inputstring); //send command to sensor.
delay(1000); //This takes 1000ms to complete.
//Draw part of the screen here and the info when we have it.
//info comes after the loop has iterated.
myUTFT.clrScr();
resetButtons();
//Draw back button
subBackButton = myButtons.addButton( 10, 168, 145, 53, mainButton);
myButtons.drawButton(subBackButton);
myUTFT.setBackColor (161,190,237);
myUTFT.print("Back", 45, 185);
waiting_for_single_reading = true;
}