当前位置: 首页>>代码示例>>C++>>正文


C++ TerminationCriterion::terminate方法代码示例

本文整理汇总了C++中TerminationCriterion::terminate方法的典型用法代码示例。如果您正苦于以下问题:C++ TerminationCriterion::terminate方法的具体用法?C++ TerminationCriterion::terminate怎么用?C++ TerminationCriterion::terminate使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在TerminationCriterion的用法示例。


在下文中一共展示了TerminationCriterion::terminate方法的8个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: test_vertex_bound

//VERTEX BOUND
void TerminationCriterionTest::test_vertex_bound()
{
  MsqPrintError err(std::cout);
  PatchData pd;
  create_twelve_hex_patch( pd, err );
  ASSERT_NO_ERROR(err);
  
    // get bounding dimension for patch
  double maxcoord = 0.0;
  for (size_t i = 0; i < pd.num_nodes(); ++i) 
    for (int d = 0; d < 3; ++d)
      if (fabs(pd.vertex_by_index(i)[d]) > maxcoord)
        maxcoord = fabs(pd.vertex_by_index(i)[d]);
    // add a little bit for rounding error
  maxcoord += 1e-5;
  
  TerminationCriterion tc;
  tc.add_bounded_vertex_movement( maxcoord );
  tc.reset_inner( pd, ofEval, err );
  ASSERT_NO_ERROR(err);
  tc.reset_patch( pd, err );
  ASSERT_NO_ERROR(err);
  CPPUNIT_ASSERT(!tc.terminate());
  
  int idx = pd.num_free_vertices() - 1;
  Vector3D pos = pd.vertex_by_index(idx);
  pos[0] = 2*maxcoord;
  pd.set_vertex_coordinates( pos, idx, err );
  ASSERT_NO_ERROR(err);
  tc.accumulate_inner( pd, 0.0, 0, err );
  ASSERT_NO_ERROR(err);
  tc.accumulate_patch( pd, err );
  ASSERT_NO_ERROR(err);
  CPPUNIT_ASSERT(tc.terminate());
}
开发者ID:gitter-badger,项目名称:quinoa,代码行数:36,代码来源:TerminationCriterionTest.cpp

示例2: test_vertex_movement_common

void TerminationCriterionTest::test_vertex_movement_common( bool absolute )
{
  MsqPrintError err(std::cout);
  PatchData pd;
  create_twelve_hex_patch( pd, err );
  ASSERT_NO_ERROR(err);
 
  const double LIMIT = 1e-4;
  TerminationCriterion tc;
  if (absolute)
    tc.add_absolute_vertex_movement( LIMIT );
  else
    tc.add_relative_vertex_movement( LIMIT );

  tc.reset_inner( pd, ofEval, err );
  ASSERT_NO_ERROR(err);
  tc.reset_patch( pd, err );
  ASSERT_NO_ERROR(err);
  CPPUNIT_ASSERT(!tc.terminate());

  const double FIRST_STEP=10.0;
    // move a vertex by 10 units and check that it did not meet criterion
  pd.move_vertex( Vector3D(FIRST_STEP,0,0), 0, err );
  ASSERT_NO_ERROR(err);
  tc.accumulate_inner( pd, 0.0, 0, err );
  ASSERT_NO_ERROR(err);
  tc.accumulate_patch( pd, err );
  ASSERT_NO_ERROR(err);
  CPPUNIT_ASSERT(!tc.terminate());
  
  double test_limit = LIMIT;
  if (!absolute)
    test_limit *= FIRST_STEP;
    
  int idx = 0;
  for (double step = FIRST_STEP; step > test_limit; step *= 0.09) {
    idx = (idx + 1) % pd.num_free_vertices();
    pd.move_vertex( Vector3D(step,0,0), idx, err );
    ASSERT_NO_ERROR(err);
    
    tc.accumulate_inner( pd, 0.0, 0, err );
    ASSERT_NO_ERROR(err);
    tc.accumulate_patch( pd, err );
    ASSERT_NO_ERROR(err);
    CPPUNIT_ASSERT(!tc.terminate());
  }
  
  idx = (idx + 1) % pd.num_free_vertices();
  pd.move_vertex( Vector3D(0.5*test_limit,0,0), idx, err );
  ASSERT_NO_ERROR(err);

  tc.accumulate_inner( pd, 0.0, 0, err );
  ASSERT_NO_ERROR(err);
  tc.accumulate_patch( pd, err );
  ASSERT_NO_ERROR(err);
  CPPUNIT_ASSERT(tc.terminate());
}
开发者ID:gitter-badger,项目名称:quinoa,代码行数:57,代码来源:TerminationCriterionTest.cpp

示例3: test_gradient_common

void TerminationCriterionTest::test_gradient_common( bool absolute, bool L2 )
{
  MsqPrintError err(std::cout);
  PatchData pd;
  create_twelve_hex_patch( pd, err );
  ASSERT_NO_ERROR(err);
  
  const double LIMIT = 1e-4;
  TerminationCriterion tc;
  if (absolute) {
    if (L2)
      tc.add_absolute_gradient_L2_norm( LIMIT );
    else
      tc.add_absolute_gradient_inf_norm( LIMIT );
  }
  else {
    if (L2)
      tc.add_relative_gradient_L2_norm( LIMIT );
    else
      tc.add_relative_gradient_inf_norm( LIMIT );
  }
  
  double (*func_ptr)(const Vector3D*, int) = L2 ? &lenfunc : &maxfunc;

  double junk, value = 1; 
  objFunc.mGrad = Vector3D(value,value,value);
  tc.reset_inner( pd, ofEval, err );
  ASSERT_NO_ERROR(err);
  tc.reset_patch( pd, err );
  ASSERT_NO_ERROR(err);
  
  std::vector<Vector3D> grad;
  ofEval.evaluate( pd, junk, grad, err );
  ASSERT_NO_ERROR(err);
  
  double limit = LIMIT;
  if (!absolute) 
    limit *= func_ptr(arrptr(grad),pd.num_free_vertices());

  while (func_ptr(arrptr(grad),pd.num_free_vertices()) > limit) {
    CPPUNIT_ASSERT(!tc.terminate());

    value *= 0.1;
    objFunc.mGrad = Vector3D(value,value,value);
    ofEval.evaluate( pd, junk, grad, err );
    ASSERT_NO_ERROR(err);
 
    tc.accumulate_inner( pd, 0.0, arrptr(grad), err );
    ASSERT_NO_ERROR(err);
    tc.accumulate_patch( pd, err );
    ASSERT_NO_ERROR(err);
  }
  
  CPPUNIT_ASSERT(tc.terminate());
}
开发者ID:gitter-badger,项目名称:quinoa,代码行数:55,代码来源:TerminationCriterionTest.cpp

示例4: test_quality_common

void TerminationCriterionTest::test_quality_common( bool absolute, bool successive )
{
  MsqPrintError err(std::cout);
  PatchData pd;
  ASSERT_NO_ERROR(err);
  
  const double LIMIT = 1e-4;
  TerminationCriterion tc;
  bool (*func_ptr)(double, double, double, double);
  if (absolute) {
    if (successive) {
      tc.add_absolute_successive_improvement( LIMIT );
      func_ptr = &limit_absolute_sucessive;
    }
    else {
      tc.add_absolute_quality_improvement( LIMIT );
      func_ptr = &limit_absolute_quality;
    }
  }
  else {
    if (successive) {
      tc.add_relative_successive_improvement( LIMIT );
      func_ptr = &limit_relative_sucessive;
    }
    else {
      tc.add_relative_quality_improvement( LIMIT );
      func_ptr = &limit_relative_quality;
    }
  }

  const double INIT_VALUE = 10.0;
  objFunc.mValue = INIT_VALUE;
  tc.reset_inner( pd, ofEval, err );
  ASSERT_NO_ERROR(err);
  tc.reset_patch( pd, err );
  ASSERT_NO_ERROR(err);
  double prev = HUGE_VAL;

  while (!func_ptr(INIT_VALUE,prev,objFunc.mValue,LIMIT)) {
    CPPUNIT_ASSERT(!tc.terminate());

    prev = objFunc.mValue;
    objFunc.mValue *= 0.1;
    tc.accumulate_inner( pd, objFunc.mValue, 0, err );
    ASSERT_NO_ERROR(err);
    tc.accumulate_patch( pd, err );
    ASSERT_NO_ERROR(err);
  }
  
  CPPUNIT_ASSERT(tc.terminate());
}
开发者ID:gitter-badger,项目名称:quinoa,代码行数:51,代码来源:TerminationCriterionTest.cpp

示例5: test_untangled_mesh

//UNTANGLED
void TerminationCriterionTest::test_untangled_mesh()
{
  MsqPrintError err(std::cout);
  PatchData pd;
  create_twelve_hex_patch( pd, err );
  ASSERT_NO_ERROR(err);
  
    // get two opposite vertices in first hexahedral element
  int vtx1 = pd.element_by_index(0).get_vertex_index_array()[0];
  int vtx2 = pd.element_by_index(0).get_vertex_index_array()[7];
  Vector3D saved_coords = pd.vertex_by_index(vtx2);
  Vector3D opposite_coords = pd.vertex_by_index(vtx1);

    // invert the element
  pd.move_vertex( 2*(opposite_coords-saved_coords), vtx2, err );
  ASSERT_NO_ERROR(err);
  int inverted, samples;
  pd.element_by_index(0).check_element_orientation( pd, inverted, samples, err );
  ASSERT_NO_ERROR(err);
  CPPUNIT_ASSERT(inverted > 0);
  
    // check initial termination criterion
  TerminationCriterion tc;
  tc.add_untangled_mesh();
  tc.reset_inner( pd, ofEval, err );
  ASSERT_NO_ERROR(err);
  tc.reset_patch( pd, err );
  ASSERT_NO_ERROR(err);
  CPPUNIT_ASSERT(!tc.terminate());
  
    // fix the element
  pd.set_vertex_coordinates( saved_coords, vtx2, err );
  ASSERT_NO_ERROR(err);
  pd.element_by_index(0).check_element_orientation( pd, inverted, samples, err );
  ASSERT_NO_ERROR(err);
  CPPUNIT_ASSERT_EQUAL(0,inverted);
  
    // check that TC recognized untangled mesh
  tc.accumulate_inner( pd, 0.0, 0, err );
  ASSERT_NO_ERROR(err);
  tc.accumulate_patch( pd, err );
  ASSERT_NO_ERROR(err);
  CPPUNIT_ASSERT(tc.terminate());
}
开发者ID:gitter-badger,项目名称:quinoa,代码行数:45,代码来源:TerminationCriterionTest.cpp

示例6: test_cpu_time_common

    //CPU TIME
void TerminationCriterionTest::test_cpu_time_common( bool inner )
{
  MsqPrintError err(std::cout);
  PatchData pd;
  double LIMIT = 0.5;

  TerminationCriterion tc;
  tc.add_cpu_time(LIMIT);
  if (inner)
    tc.reset_inner( pd, ofEval, err );
  else
    tc.reset_outer( 0, 0, ofEval, 0, err );
  ASSERT_NO_ERROR(err);
  tc.reset_patch( pd, err );
  ASSERT_NO_ERROR(err);
  
  Timer timer;
  while (timer.since_birth() < 0.5*LIMIT) {
    CPPUNIT_ASSERT(!tc.terminate());
    tc.accumulate_patch( pd, err );
    ASSERT_NO_ERROR(err);
    if (inner)
      tc.accumulate_inner( pd, 0, 0, err );
    else
      tc.accumulate_outer( 0, 0, ofEval, 0, err );
    ASSERT_NO_ERROR(err);
  }
  
  while (timer.since_birth() < 1.1*LIMIT);

  tc.accumulate_patch( pd, err );
  ASSERT_NO_ERROR(err);
  if (inner)
    tc.accumulate_inner( pd, 0, 0, err );
  else
    tc.accumulate_outer( 0, 0, ofEval, 0, err );
  ASSERT_NO_ERROR(err);
  CPPUNIT_ASSERT(tc.terminate());
}
开发者ID:gitter-badger,项目名称:quinoa,代码行数:40,代码来源:TerminationCriterionTest.cpp

示例7: test_number_of_iterates_outer

void TerminationCriterionTest::test_number_of_iterates_outer()
{
  MsqPrintError err(std::cout);
  PatchData pd;
  const int LIMIT = 2;

  TerminationCriterion tc;
  tc.add_iteration_limit(LIMIT);
  tc.reset_outer( 0, 0, ofEval, 0, err );
  ASSERT_NO_ERROR(err);
  tc.reset_patch( pd, err );
  ASSERT_NO_ERROR(err);
  for (int i = 0; i < LIMIT; ++i) {
    CPPUNIT_ASSERT(!tc.terminate());
    CPPUNIT_ASSERT_EQUAL( i, tc.get_iteration_count() );
    tc.accumulate_patch( pd, err );
    ASSERT_NO_ERROR(err);
    tc.accumulate_outer( 0, 0, ofEval, 0, err );
    ASSERT_NO_ERROR(err);
  }
  CPPUNIT_ASSERT_EQUAL( 2, tc.get_iteration_count() );
  CPPUNIT_ASSERT(tc.terminate());
}
开发者ID:gitter-badger,项目名称:quinoa,代码行数:23,代码来源:TerminationCriterionTest.cpp

示例8: test_absolute_vertex_movement_edge_length

void TerminationCriterionTest::test_absolute_vertex_movement_edge_length()
{
  MsqPrintError err(std::cout);
  
  // define two-tet mesh where tets share a face
  double coords[] = {  0, -5, 0,
                       0,  5, 0,
                       1,  0, 0,
                       0,  0, 0,
                       0,  0, 1 };
  const unsigned long conn[] = { 4, 3, 2, 0,
                                 2, 3, 4, 1 };
  int fixed[5] = {0};
  ArrayMesh mesh( 3, 5, coords, fixed, 2, TETRAHEDRON, conn );
  
    // calculate beta 
  const double LIMIT = 1e-4; // desired absolute limit
  MeshUtil tool(&mesh);
  SimpleStats len;
  tool.edge_length_distribution( len, err );
  ASSERT_NO_ERROR(err);
  const double beta = LIMIT / (len.average() - len.standard_deviation());
  
    // initialize termination criterion
  TerminationCriterion tc;
  tc.add_absolute_vertex_movement_edge_length( beta );
  MeshDomainAssoc mesh_and_domain2 = MeshDomainAssoc(&mesh, 0);
  tc.initialize_queue( &mesh_and_domain2, 0, err ); ASSERT_NO_ERROR(err);
  
    // get a patch data
  PatchData pd;
  pd.set_mesh( &mesh );
  pd.fill_global_patch( err ); ASSERT_NO_ERROR(err);

    // test termination criteiorn
  tc.reset_inner( pd, ofEval, err );
  ASSERT_NO_ERROR(err);
  tc.reset_patch( pd, err );
  ASSERT_NO_ERROR(err);
  CPPUNIT_ASSERT(!tc.terminate());

  const double FIRST_STEP=10.0;
    // move a vertex by 10 units and check that it did not meet criterion
  pd.move_vertex( Vector3D(FIRST_STEP,0,0), 0, err );
  ASSERT_NO_ERROR(err);
  tc.accumulate_inner( pd, 0.0, 0, err );
  ASSERT_NO_ERROR(err);
  tc.accumulate_patch( pd, err );
  ASSERT_NO_ERROR(err);
  CPPUNIT_ASSERT(!tc.terminate());
  
  double test_limit = LIMIT;
    
  int idx = 0;
  for (double step = FIRST_STEP; step > test_limit; step *= 0.09) {
    idx = (idx + 1) % pd.num_free_vertices();
    pd.move_vertex( Vector3D(step,0,0), idx, err );
    ASSERT_NO_ERROR(err);
    
    tc.accumulate_inner( pd, 0.0, 0, err );
    ASSERT_NO_ERROR(err);
    tc.accumulate_patch( pd, err );
    ASSERT_NO_ERROR(err);
    CPPUNIT_ASSERT(!tc.terminate());
  }
  
  idx = (idx + 1) % pd.num_free_vertices();
  pd.move_vertex( Vector3D(0.5*test_limit,0,0), idx, err );
  ASSERT_NO_ERROR(err);

  tc.accumulate_inner( pd, 0.0, 0, err );
  ASSERT_NO_ERROR(err);
  tc.accumulate_patch( pd, err );
  ASSERT_NO_ERROR(err);
  CPPUNIT_ASSERT(tc.terminate());
}
开发者ID:gitter-badger,项目名称:quinoa,代码行数:76,代码来源:TerminationCriterionTest.cpp


注:本文中的TerminationCriterion::terminate方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。