当前位置: 首页>>代码示例>>C++>>正文

C++ TUNER_MODULE::Initialize方法代码示例

本文整理汇总了C++中TUNER_MODULE::Initialize方法的典型用法代码示例。如果您正苦于以下问题：C++ TUNER_MODULE::Initialize方法的具体用法？C++ TUNER_MODULE::Initialize怎么用？C++ TUNER_MODULE::Initialize使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类TUNER_MODULE的用法示例。


在下文中一共展示了TUNER_MODULE::Initialize方法的10个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: 

/**

@see   DVBT_NIM_FP_INITIALIZE

*/
int
rtl2832_fc2580_Initialize(
	DVBT_NIM_MODULE *pNim
	)
{
	typedef struct
	{
		int RegBitName;
		unsigned long Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_FC2580_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,				Value
		{DVBT_DAGC_TRG_VAL,			0x39	},
		{DVBT_AGC_TARG_VAL_0,		0x0		},
		{DVBT_AGC_TARG_VAL_8_1,		0x5a	},
		{DVBT_AAGC_LOOP_GAIN,		0x16    },
		{DVBT_LOOP_GAIN2_3_0,		0x6		},
		{DVBT_LOOP_GAIN2_4,			0x1		},
		{DVBT_LOOP_GAIN3,			0x16	},
		{DVBT_VTOP1,				0x35	},
		{DVBT_VTOP2,				0x21	},
		{DVBT_VTOP3,				0x21	},
		{DVBT_KRF1,					0x0		},
		{DVBT_KRF2,					0x40	},
		{DVBT_KRF3,					0x10	},
		{DVBT_KRF4,					0x10	},
		{DVBT_IF_AGC_MIN,			0x80	},
		{DVBT_IF_AGC_MAX,			0x7f	},
		{DVBT_RF_AGC_MIN,			0x9c	},
		{DVBT_RF_AGC_MAX,			0x7f	},
		{DVBT_POLAR_RF_AGC,			0x0		},
		{DVBT_POLAR_IF_AGC,			0x0		},
		{DVBT_AD7_SETTING,			0xe9f4	},
	};


	TUNER_MODULE *pTuner;
	DVBT_DEMOD_MODULE *pDemod;

	int i;

	int RegBitName;
	unsigned long Value;



	// Get tuner module and demod module.
	pTuner = pNim->pTuner;
	pDemod = pNim->pDemod;


	// Enable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
		goto error_status_set_registers;

	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Disable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
		goto error_status_set_registers;


	// Initialize demod.
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod IF frequency with 0 Hz.
	if(pDemod->SetIfFreqHz(pDemod, IF_FREQ_0HZ) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod spectrum mode with SPECTRUM_NORMAL.
	if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_NORMAL) != FUNCTION_SUCCESS)
		goto error_status_execute_function;


	// Set demod registers.
	for(i = 0; i < RTL2832_FC2580_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
	{
		// Get register bit name and its value.
		RegBitName = AdditionalInitRegValueTable[i].RegBitName;
		Value      = AdditionalInitRegValueTable[i].Value;

		// Set demod registers
		if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
			goto error_status_set_registers;
	}


	// Set TS interface according to TS interface mode.
//.........这里部分代码省略.........
开发者ID:OpenHMR，项目名称:Open-HMR600，代码行数:101，代码来源:nim_rtl2832_fc2580.c

示例2: 

/**

@see   DTMB_NIM_FP_INITIALIZE

*/
s32
rtl2836_mxl5007t_Initialize(
	DTMB_NIM_MODULE *pNim
	)
{
	typedef struct
	{
		s32 RegBitName;
		u64 Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2836_MXL5007T_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,				Value
		{DTMB_TARGET_VAL,			0x38	},
	};


	TUNER_MODULE *pTuner;
	DTMB_DEMOD_MODULE *pDemod;

	MXL5007T_EXTRA_MODULE *pTunerExtra;

	s32 i;

	s32 RegBitName;
	u64 Value;



	// Get tuner module and demod module.
	pTuner = pNim->pTuner;
	pDemod = pNim->pDemod;

	// Get tuner extra module.
	pTunerExtra = &(pTuner->Extra.Mxl5007t);


	// Enable demod DTMB_I2CT_EN_CTRL.
	if(pDemod->RegAccess.Addr8Bit.SetRegBitsWithPage(pDemod, DTMB_I2CT_EN_CTRL, 0x1) != FUNCTION_SUCCESS)
		goto error_status_set_registers;

	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set tuner bandwidth mode with 8 MHz.
	if(pTunerExtra->SetBandwidthMode(pTuner, MXL5007T_BANDWIDTH_8000000HZ) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Disable demod DTMB_I2CT_EN_CTRL.
	if(pDemod->RegAccess.Addr8Bit.SetRegBitsWithPage(pDemod, DTMB_I2CT_EN_CTRL, 0x0) != FUNCTION_SUCCESS)
		goto error_status_set_registers;


	// Initialize demod.
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod IF frequency with NIM default.
	if(pDemod->SetIfFreqHz(pDemod, RTL2836_MXL5007T_IF_FREQ_HZ_DEFAULT) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod spectrum mode with NIM default.
	if(pDemod->SetSpectrumMode(pDemod, RTL2836_MXL5007T_SPECTRUM_MODE_DEFAULT) != FUNCTION_SUCCESS)
		goto error_status_execute_function;


	// Set demod registers.
	for(i = 0; i < RTL2836_MXL5007T_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
	{
		// Get register bit name and its value.
		RegBitName = AdditionalInitRegValueTable[i].RegBitName;
		Value      = AdditionalInitRegValueTable[i].Value;

		// Set demod registers
		if(pDemod->RegAccess.Addr8Bit.SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
			goto error_status_set_registers;
	}


	return FUNCTION_SUCCESS;


error_status_execute_function:
error_status_set_registers:
	return FUNCTION_ERROR;
}
开发者ID:ldy972，项目名称:Drone，代码行数:95，代码来源:nim_rtl2836_mxl5007t.c

示例3: 

/**
 * @see   DVBT_NIM_FP_INITIALIZE
 */
s32 rtl2832_tda18272_Initialize(DVBT_NIM_MODULE *pNim)
{
	typedef struct
	{
		s32 RegBitName;
		u64 Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_TDA18272_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,				Value
		{DVBT_DAGC_TRG_VAL,			0x39	},
		{DVBT_AGC_TARG_VAL_0,		0x0		},
		{DVBT_AGC_TARG_VAL_8_1,		0x40	},
		{DVBT_AAGC_LOOP_GAIN,		0x16    },
		{DVBT_LOOP_GAIN2_3_0,		0x8		},
		{DVBT_LOOP_GAIN2_4,			0x1		},
		{DVBT_LOOP_GAIN3,			0x18	},
		{DVBT_VTOP1,				0x35	},
		{DVBT_VTOP2,				0x21	},
		{DVBT_VTOP3,				0x21	},
		{DVBT_KRF1,					0x0		},
		{DVBT_KRF2,					0x40	},
		{DVBT_KRF3,					0x10	},
		{DVBT_KRF4,					0x10	},
		{DVBT_IF_AGC_MIN,			0x80	},
		{DVBT_IF_AGC_MAX,			0x7f	},
		{DVBT_RF_AGC_MIN,			0x80	},
		{DVBT_RF_AGC_MAX,			0x7f	},
		{DVBT_POLAR_RF_AGC,			0x0		},
		{DVBT_POLAR_IF_AGC,			0x0		},
		{DVBT_AD7_SETTING,			0xe9f4	},
	};


	TUNER_MODULE *pTuner;
	DVBT_DEMOD_MODULE *pDemod;

	s32 i;

	s32 RegBitName;
	u64 Value;



	// Get tuner module and demod module.
	pTuner = pNim->pTuner;
	pDemod = pNim->pDemod;


	// Enable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
		goto error_status_set_registers;

	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Disable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
		goto error_status_set_registers;


	// Initialize demod.
	// Note: TDA18272 tuner uses dynamic IF frequency, so we will set demod IF frequency in SetParameters().
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod spectrum mode with SPECTRUM_INVERSE.
	if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_INVERSE) != FUNCTION_SUCCESS)
		goto error_status_execute_function;


	// Set demod registers.
	for(i = 0; i < RTL2832_TDA18272_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
	{
		// Get register bit name and its value.
		RegBitName = AdditionalInitRegValueTable[i].RegBitName;
		Value      = AdditionalInitRegValueTable[i].Value;

		// Set demod registers
		if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
			goto error_status_set_registers;
	}


	return FUNCTION_SUCCESS;


error_status_execute_function:
error_status_set_registers:
	return FUNCTION_ERROR;
}
开发者ID:ldy972，项目名称:Drone，代码行数:98，代码来源:nim_rtl2832_tda18272.c

示例4: 

/**

@see   DTMB_NIM_FP_INITIALIZE

*/
int
rtl2836b_dtmb_va1e1ed2403_Initialize(
	DTMB_NIM_MODULE *pNim
	)
{
	typedef struct
	{
		int RegBitName;
		unsigned long Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2836B_DTMB_VA1E1ED2403_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,				Value
		{DTMB_AGC_DRIVE_LV,				0x0		},
		{DTMB_Z_AGC,					0x1		},
		{DTMB_EN_PGA_MODE,				0x0		},
		{DTMB_TARGET_VAL,				0x38	},
		{DTMB_AAGC_LOOPGAIN1,			0x15	},
		{DTMB_INTEGRAL_CNT_LEN,			0xc		},
		{DTMB_AAGC_LOCK_PGA_HIT_LEN,	0x1		},
		{DTMB_THD_LOCK_UP,				0x205	},
		{DTMB_THD_LOCK_DW,				0x1fb	},
		{DTMB_THD_UP1,					0x205	},
		{DTMB_THD_DW1,					0x1fb	},
		{DTMB_THD_UP2,					0x86	},
		{DTMB_THD_DW2,					0x7a	},
		{DTMB_GAIN_PULSE_SPACE_LEN,		0x1		},
		{DTMB_GAIN_PULSE_HOLD_LEN,		0x1		},
		{DTMB_GAIN_STEP_SUM_UP_THD,		0xb		},
		{DTMB_GAIN_STEP_SUM_DW_THD,		0x5		},
	};


	TUNER_MODULE *pTuner;
	DTMB_DEMOD_MODULE *pDemod;

	int i;

	int RegBitName;
	unsigned long Value;



	// Get tuner module and demod module.
	pTuner = pNim->pTuner;
	pDemod = pNim->pDemod;


	// Enable demod DTMB_I2CT_EN_CTRL.
	if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, DTMB_I2CT_EN_CTRL, 0x1) != FUNCTION_SUCCESS)
		goto error_status_set_registers;

	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Disable demod DTMB_I2CT_EN_CTRL.
	if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, DTMB_I2CT_EN_CTRL, 0x0) != FUNCTION_SUCCESS)
		goto error_status_set_registers;


	// Initialize demod.
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod IF frequency with 36 MHz.
	if(pDemod->SetIfFreqHz(pDemod, IF_FREQ_36000000HZ) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod spectrum mode with SPECTRUM_NORMAL.
	if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_NORMAL) != FUNCTION_SUCCESS)
		goto error_status_execute_function;


	// Set demod registers.
	for(i = 0; i < RTL2836B_DTMB_VA1E1ED2403_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
	{
		// Get register bit name and its value.
		RegBitName = AdditionalInitRegValueTable[i].RegBitName;
		Value      = AdditionalInitRegValueTable[i].Value;

		// Set demod registers
		if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
			goto error_status_set_registers;
	}


	return FUNCTION_SUCCESS;


error_status_execute_function:
error_status_set_registers:
//.........这里部分代码省略.........
开发者ID:mrtos，项目名称:gk6105s-id，代码行数:101，代码来源:nim_rtl2836b_dtmb_va1e1ed2403.c

示例5: 

/**

@see   DVBT_NIM_FP_INITIALIZE

*/
int
rtl2832_max3543_Initialize(
	DVBT_NIM_MODULE *pNim
	)
{
	typedef struct
	{
		int RegBitName;
		unsigned long Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_MAX3543_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,				Value
		{DVBT_DAGC_TRG_VAL,			0x39	},
		{DVBT_AGC_TARG_VAL_0,		0x0		},
		{DVBT_AGC_TARG_VAL_8_1,		0x4b	},
		{DVBT_AAGC_LOOP_GAIN,		0x16    },
		{DVBT_LOOP_GAIN2_3_0,		0x6		},
		{DVBT_LOOP_GAIN2_4,			0x1		},
		{DVBT_LOOP_GAIN3,			0x16	},
		{DVBT_VTOP1,				0x35	},
		{DVBT_VTOP2,				0x21	},
		{DVBT_VTOP3,				0x21	},
		{DVBT_KRF1,					0x0		},
		{DVBT_KRF2,					0x40	},
		{DVBT_KRF3,					0x10	},
		{DVBT_KRF4,					0x10	},
		{DVBT_IF_AGC_MIN,			0x80	},
		{DVBT_IF_AGC_MAX,			0x7f	},
		{DVBT_RF_AGC_MIN,			0x80	},
		{DVBT_RF_AGC_MAX,			0x7f	},
		{DVBT_POLAR_RF_AGC,			0x0		},
		{DVBT_POLAR_IF_AGC,			0x0		},
		{DVBT_AD7_SETTING,			0xe9d4	},
		{DVBT_AD_EN_REG1,			0x0		},
		{DVBT_CKOUT_PWR_PID,		0x0		},
	};


	TUNER_MODULE *pTuner;
	DVBT_DEMOD_MODULE *pDemod;

	int i;

	int RegBitName;
	unsigned long Value;



	// Get tuner module and demod module.
	pTuner = pNim->pTuner;
	pDemod = pNim->pDemod;


	// Enable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
		goto error_status_set_registers;

	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Disable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
		goto error_status_set_registers;


	// Initialize demod.
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod IF frequency with NIM default.
	if(pDemod->SetIfFreqHz(pDemod, RTL2832_MAX3543_IF_FREQ_HZ_DEFAULT) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod spectrum mode with NIM default.
	if(pDemod->SetSpectrumMode(pDemod, RTL2832_MAX3543_SPECTRUM_MODE_DEFAULT) != FUNCTION_SUCCESS)
		goto error_status_execute_function;


	// Set demod registers.
	for(i = 0; i < RTL2832_MAX3543_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
	{
		// Get register bit name and its value.
		RegBitName = AdditionalInitRegValueTable[i].RegBitName;
		Value      = AdditionalInitRegValueTable[i].Value;

		// Set demod registers
		if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
			goto error_status_set_registers;
	}

//.........这里部分代码省略.........
开发者ID:ambrosa，项目名称:DVB-Realtek-RTL2832U-2.2.2-10_tuner，代码行数:101，代码来源:nim_rtl2832_max3543.c

示例6: 

/**

@see   DVBT_NIM_FP_INITIALIZE

*/
int
rtl2832_fc0013_Initialize(
	DVBT_NIM_MODULE *pNim
	)
{
	typedef struct
	{
		int RegBitName;
		unsigned long Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_FC0013_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,				Value
		{DVBT_DAGC_TRG_VAL,			0x5a	},
		{DVBT_AGC_TARG_VAL_0,		0x0		},
		{DVBT_AGC_TARG_VAL_8_1,		0x5a	},
		{DVBT_AAGC_LOOP_GAIN,		0x16    },
		{DVBT_LOOP_GAIN2_3_0,		0x6		},
		{DVBT_LOOP_GAIN2_4,			0x1		},
		{DVBT_LOOP_GAIN3,			0x16	},
		{DVBT_VTOP1,				0x35	},
		{DVBT_VTOP2,				0x21	},
		{DVBT_VTOP3,				0x21	},
		{DVBT_KRF1,					0x0		},
		{DVBT_KRF2,					0x40	},
		{DVBT_KRF3,					0x10	},
		{DVBT_KRF4,					0x10	},
		{DVBT_IF_AGC_MIN,			0x80	},
		{DVBT_IF_AGC_MAX,			0x7f	},
		{DVBT_RF_AGC_MIN,			0x80	},
		{DVBT_RF_AGC_MAX,			0x7f	},
		{DVBT_POLAR_RF_AGC,			0x0		},
		{DVBT_POLAR_IF_AGC,			0x0		},
		{DVBT_AD7_SETTING,			0xe9bf	},
		{DVBT_EN_GI_PGA,			0x0		},
		{DVBT_THD_LOCK_UP,			0x0		},
		{DVBT_THD_LOCK_DW,			0x0		},
		{DVBT_THD_UP1,				0x11	},
		{DVBT_THD_DW1,				0xef	},
		{DVBT_INTER_CNT_LEN,		0xc		},
		{DVBT_GI_PGA_STATE,			0x0		},
		{DVBT_EN_AGC_PGA,			0x1		},
//		{DVBT_REG_GPE,				0x1		},
//		{DVBT_REG_GPO,				0x0		},
//		{DVBT_REG_MONSEL,			0x0		},
//		{DVBT_REG_MON,				0x3		},
//		{DVBT_REG_4MSEL,			0x0		},
	};


	TUNER_MODULE *pTuner;
	DVBT_DEMOD_MODULE *pDemod;

	int i;

	int RegBitName;
	unsigned long Value;



	// Get tuner module and demod module.
	pTuner = pNim->pTuner;
	pDemod = pNim->pDemod;


	// Enable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
		goto error_status_set_registers;

	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set FC0013 up-dowm AGC.
	//(0xFE for master of dual).
	//(0xFC for slave of dual, and for 2832 mini dongle).
	if(fc0013_SetRegMaskBits(pTuner, 0x0c, 7, 0, 0xFC) != FC0013_I2C_SUCCESS)
		goto error_status_set_tuner_registers;

	// Disable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
		goto error_status_set_registers;


	// Initialize demod.
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod IF frequency with 0 Hz.
	if(pDemod->SetIfFreqHz(pDemod, IF_FREQ_0HZ) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

//.........这里部分代码省略.........
开发者ID:BalintBanyasz，项目名称:DVB-Realtek-RTL2832U-2.2.2-10tuner-mod_kernel-3.0.0，代码行数:101，代码来源:nim_rtl2832_fc0013.c

示例7: 

/**

@see   QAM_NIM_FP_INITIALIZE

*/
int
rtl2836b_dvbc_va1t1ed6093_Initialize(
	QAM_NIM_MODULE *pNim
	)
{
	typedef struct
	{
		int RegBitName;
		unsigned long Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2836B_DVBC_VA1T1ED6093_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,					Value
		{QAM_AGC_DRIVE_LV,				0x0		},
		{QAM_OPT_RF_AAGC_DRIVE,			0x0		},
		{QAM_OPT_IF_AAGC_DRIVE,			0x0		},
		{QAM_OPT_RF_AAGC_OE,			0x0		},
		{QAM_OPT_IF_AAGC_OE,			0x1		},
		{QAM_PAR_RF_SD_IB,				0x1		},
		{QAM_PAR_IF_SD_IB,				0x1		},
		{QAM_RF_AAGC_MAX,				0x80	},
		{QAM_RF_AAGC_MIN,				0x80	},
		{QAM_IF_AAGC_MAX,				0xff	},
		{QAM_IF_AAGC_MIN,				0x0		},
		{QAM_VTOP,						0x80	},
		{QAM_KRF_MSB,					0x1		},
		{QAM_KRF_LSB,					0x1		},
		{QAM_AAGC_MODE_SEL,				0x0		},
	};


	QAM_DEMOD_MODULE *pDemod;
	TUNER_MODULE *pTuner;

	int i;

	int RegBitName;
	unsigned long Value;


	// Get demod module and tuner module.
	pDemod = pNim->pDemod;
	pTuner = pNim->pTuner;


	// Enable demod QAM_I2CT_EN_CTRL.
	if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, QAM_I2CT_EN_CTRL, 0x1) != FUNCTION_SUCCESS)
		goto error_status_set_registers;

	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Disable demod QAM_I2CT_EN_CTRL.
	if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, QAM_I2CT_EN_CTRL, 0x0) != FUNCTION_SUCCESS)
		goto error_status_set_registers;


	// Initialize demod.
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod IF frequency with 36 MHz.
	if(pDemod->SetIfFreqHz(pDemod, IF_FREQ_36000000HZ) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod spectrum mode with SPECTRUM_NORMAL.
	// Note: RTL2836B DVB-C demod hardware will detect spectrum mode automatically,
	//       even if one uses SetSpectrumMode() to set spectrum mode.
	if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_NORMAL) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod AAGC registers.
	// Note: SetParameters() will set QAM_AAGC_TARGET and QAM_VTOP according to parameters.
	for(i = 0; i < RTL2836B_DVBC_VA1T1ED6093_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
	{
		// Get register bit name and its value.
		RegBitName = AdditionalInitRegValueTable[i].RegBitName;
		Value      = AdditionalInitRegValueTable[i].Value;

		// Set demod registers
		if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
			goto error_status_set_registers;
	}


	return FUNCTION_SUCCESS;


error_status_set_registers:
error_status_execute_function:
	return FUNCTION_ERROR;
//.........这里部分代码省略.........
开发者ID:mrtos，项目名称:gk6105s-id，代码行数:101，代码来源:nim_rtl2836b_dvbc_va1t1ed6093.c

示例8: 

/**

@see   QAM_NIM_FP_INITIALIZE

*/
s32
rtl2840_max3543_Initialize(
	QAM_NIM_MODULE *pNim
	)
{
	typedef struct
	{
		s32 RegBitName;
		u64 Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2840_MAX3543_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,					Value
		{QAM_OPT_RF_AAGC_DRIVE,			0x1		},
		{QAM_OPT_IF_AAGC_DRIVE,			0x1		},
		{QAM_OPT_RF_AAGC_OEN,			0x1		},
		{QAM_OPT_IF_AAGC_OEN,			0x1		},
		{QAM_RF_AAGC_MAX,				0xff	},
		{QAM_RF_AAGC_MIN,				0x0		},
		{QAM_IF_AAGC_MAX,				0xff	},
		{QAM_IF_AAGC_MIN,				0x0		},
		{QAM_AAGC_MODE_SEL,				0x0		},
	};


	QAM_DEMOD_MODULE *pDemod;
	TUNER_MODULE *pTuner;

	s32 i;

	s32 RegBitName;
	u64 Value;


	// Get demod module and tuner module.
	pDemod = pNim->pDemod;
	pTuner = pNim->pTuner;


	// Initialize demod.
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod IF frequency in Hz with NIM default.
	if(pDemod->SetIfFreqHz(pDemod, RTL2840_MAX3543_IF_FREQ_HZ_DEFAULT) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod spectrum mode with NIM default.
	if(pDemod->SetSpectrumMode(pDemod, RTL2840_MAX3543_SPECTRUM_MODE_DEFAULT) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod AAGC registers.
	// Note: SetParameters() will set QAM_AAGC_TARGET and QAM_VTOP according to parameters.
	for(i = 0; i < RTL2840_MAX3543_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
	{
		// Get register bit name and its value.
		RegBitName = AdditionalInitRegValueTable[i].RegBitName;
		Value      = AdditionalInitRegValueTable[i].Value;

		// Set demod registers
		if(pDemod->RegAccess.Addr8Bit.SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
			goto error_status_set_registers;
	}


	return FUNCTION_SUCCESS;


error_status_set_registers:
error_status_execute_function:
	return FUNCTION_ERROR;
}
开发者ID:ldy972，项目名称:Drone，代码行数:84，代码来源:nim_rtl2840_max3543.c

示例9: 

/**

@see   QAM_NIM_FP_INITIALIZE

*/
int
rtl2840_mt2063_Initialize(
	QAM_NIM_MODULE *pNim
	)
{
	typedef struct
	{
		int RegBitName;
		unsigned long Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2840_MT2063_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,					Value
		{QAM_OPT_RF_AAGC_DRIVE,			0x1		},
		{QAM_OPT_IF_AAGC_DRIVE,			0x1		},
		{QAM_OPT_RF_AAGC_OEN,			0x1		},
		{QAM_OPT_IF_AAGC_OEN,			0x1		},
		{QAM_RF_AAGC_MAX,				0x80	},
		{QAM_RF_AAGC_MIN,				0x80	},
		{QAM_IF_AAGC_MAX,				0xff	},
		{QAM_IF_AAGC_MIN,				0x0		},
		{QAM_AAGC_MODE_SEL,				0x0		},
	};


	TUNER_MODULE *pTuner;
	QAM_DEMOD_MODULE *pDemod;
	MT2063_EXTRA_MODULE *pTunerExtra;
	RTL2840_MT2063_EXTRA_MODULE *pNimExtra;

	int i;

	int RegBitName;
	unsigned long Value;


	// Get modules.
	pTuner = pNim->pTuner;
	pDemod = pNim->pDemod;
	pTunerExtra = &(pTuner->Extra.Mt2063);
	pNimExtra = &(pNim->Extra.Rtl2840Mt2063);


	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set tuner IF frequency in Hz.
	if(pTunerExtra->SetIfFreqHz(pTuner, pNimExtra->IfFreqHz) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Initialize demod.
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod IF frequency in Hz.
	if(pDemod->SetIfFreqHz(pDemod, pNimExtra->IfFreqHz) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod spectrum mode with SPECTRUM_INVERSE.
	if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_INVERSE) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod AAGC registers.
	// Note: SetParameters() will set QAM_AAGC_TARGET and QAM_VTOP according to parameters.
	for(i = 0; i < RTL2840_MT2063_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
	{
		// Get register bit name and its value.
		RegBitName = AdditionalInitRegValueTable[i].RegBitName;
		Value      = AdditionalInitRegValueTable[i].Value;

		// Set demod registers
		if(pDemod->RegAccess.Addr8Bit.SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
			goto error_status_set_registers;
	}


	return FUNCTION_SUCCESS;


error_status_set_registers:
error_status_execute_function:
	return FUNCTION_ERROR;
}
开发者ID:ambrosa，项目名称:DVB-Realtek-RTL2832U-2.2.2-10_tuner，代码行数:92，代码来源:nim_rtl2840_mt2063.c

示例10: 

/**

@see   DVBT_NIM_FP_INITIALIZE

*/
int
rtl2832_r820t_Initialize(
	DVBT_NIM_MODULE *pNim
	)
{
	typedef struct
	{
		int RegBitName;
		unsigned long Value;
	}
	REG_VALUE_ENTRY;


	static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2832_R820T_ADDITIONAL_INIT_REG_TABLE_LEN] =
	{
		// RegBitName,				Value
		{DVBT_DAGC_TRG_VAL,			0x39	},
		{DVBT_AGC_TARG_VAL_0,		0x0		},
		{DVBT_AGC_TARG_VAL_8_1,		0x40	},
		{DVBT_AAGC_LOOP_GAIN,		0x16    },
		{DVBT_LOOP_GAIN2_3_0,		0x8		},
		{DVBT_LOOP_GAIN2_4,			0x1		},
		{DVBT_LOOP_GAIN3,			0x18	},
		{DVBT_VTOP1,				0x35	},
		{DVBT_VTOP2,				0x21	},
		{DVBT_VTOP3,				0x21	},
		{DVBT_KRF1,					0x0		},
		{DVBT_KRF2,					0x40	},
		{DVBT_KRF3,					0x10	},
		{DVBT_KRF4,					0x10	},
		{DVBT_IF_AGC_MIN,			0x80	},
		{DVBT_IF_AGC_MAX,			0x7f	},
		{DVBT_RF_AGC_MIN,			0x80	},
		{DVBT_RF_AGC_MAX,			0x7f	},
		{DVBT_POLAR_RF_AGC,			0x0		},
		{DVBT_POLAR_IF_AGC,			0x0		},
		{DVBT_AD7_SETTING,			0xe9f4	},
	};


	TUNER_MODULE *pTuner;
	DVBT_DEMOD_MODULE *pDemod;

	int i;

	int RegBitName;
	unsigned long Value;



	// Get tuner module and demod module.
	pTuner = pNim->pTuner;
	pDemod = pNim->pDemod;


	// Enable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
		goto error_status_set_registers;

	// Initialize tuner.
	if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Disable demod DVBT_IIC_REPEAT.
	if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
		goto error_status_set_registers;


	// Initialize demod.
	if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;

	// Set demod spectrum mode with SPECTRUM_INVERSE.
	if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_INVERSE) != FUNCTION_SUCCESS)
		goto error_status_execute_function;


	// Set demod registers.
	for(i = 0; i < RTL2832_R820T_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
	{
		// Get register bit name and its value.
		RegBitName = AdditionalInitRegValueTable[i].RegBitName;
		Value      = AdditionalInitRegValueTable[i].Value;

		// Set demod registers
		if(pDemod->SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
			goto error_status_set_registers;
	}

	// Reset demod by software reset.
	if(pDemod->SoftwareReset(pDemod) != FUNCTION_SUCCESS)
		goto error_status_execute_function;


	return FUNCTION_SUCCESS;
//.........这里部分代码省略.........
开发者ID:ElectryDev，项目名称:android_kernel_grouper，代码行数:101，代码来源:nim_rtl2832_r820t.c


注：本文中的TUNER_MODULE::Initialize方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。