本文整理汇总了C++中TSpectrum::SetResolution方法的典型用法代码示例。如果您正苦于以下问题：C++ TSpectrum::SetResolution方法的具体用法？C++ TSpectrum::SetResolution怎么用？C++ TSpectrum::SetResolution使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类TSpectrum的用法示例。
在下文中一共展示了TSpectrum::SetResolution方法的1个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: fit
void fit(){
int range = 1e4;
TFile *f = new TFile("hgrroot.root");
TCanvas *ca = new TCanvas("ca","ca",0,0,1400,900);
ca->Divide(4,4);
TH1F* h[7][4];
TF1* fu[7][4][2];
TF1* fus[7][4][2][3];
double res[7*4];
double det[7*4];
double slope[7*4];
double offset[7*4];
double resolution =5;
TEnv* output = new TEnv("corecal.dat");
for(int d=0;d<7;d++){
for(int c=0;c<4;c++){
h[d][c] = (TH1F*)f->Get(Form("htraceen_b%d_c%d_cr%d_d%d",0,9,c,d+1));
ca->cd(1+c*4);
//h[d][c]->GetXaxis()->SetRangeUser(100,4000);
TSpectrum *sp = new TSpectrum(2,resolution);
sp->SetResolution(resolution);
Int_t nfound = 0;
nfound = sp->Search(h[d][c],resolution,"nobackground",0.5);
Float_t *xpeaks = sp->GetPositionX();
Float_t *ypeaks = sp->GetPositionY();
// for(int p=0;p<nfound;p++){
// cout << xpeaks[p] << "\t" << ypeaks[p] << endl;
// }
if(nfound!=2){
cout << "Found " << nfound << " peaks in spectrum, too many, aborting" << endl;
continue;
}
h[d][c]->DrawCopy();
//check if first peak is lower in energy, otherwise swap them
if(xpeaks[0]>xpeaks[1]){
Float_t temp = xpeaks[1];
xpeaks[1] = xpeaks[0];
xpeaks[0] = temp;
temp = ypeaks[1];
ypeaks[1] = ypeaks[0];
ypeaks[0] = temp;
}
for(int p=0;p<nfound;p++){
ca->cd(1+c*4+1+p);
h[d][c]->GetXaxis()->SetRangeUser(xpeaks[p]-range,xpeaks[p]+range);
h[d][c]->DrawCopy();
fu[d][c][p] = new TF1(Form("fcore_d%d_c%d_p%d",d,c,p),fgammagaussbg,xpeaks[p]-range,xpeaks[p]+range,6);
fu[d][c][p]->SetLineColor(3);
fu[d][c][p]->SetLineWidth(1);
fu[d][c][p]->SetParameter(0,0);//bg const
fu[d][c][p]->SetParameter(1,0);//bg slope
fu[d][c][p]->SetParameter(2,h[d][c]->Integral(xpeaks[p]-range,xpeaks[p]+range));//norm
fu[d][c][p]->SetParameter(3,xpeaks[p]);//mean
fu[d][c][p]->SetParLimits(3,xpeaks[p]-500,xpeaks[p]+500);//mean
fu[d][c][p]->SetParameter(4,100);//sigma
fu[d][c][p]->SetParLimits(4,0.001,1000);//sigma
fu[d][c][p]->SetParameter(5,h[d][c]->GetBinContent(h[d][c]->FindBin(xpeaks[p]-range)));//step
h[d][c]->Fit(fu[d][c][p],"Rqn");
fu[d][c][p]->Draw("same");
fus[d][c][p][0] = new TF1(Form("fcore_d%d_c%d_p%d_bg",d,c,p),fgammabg,xpeaks[p]-range,xpeaks[p]+range,6);
fus[d][c][p][1] = new TF1(Form("fcore_d%d_c%d_p%d_st",d,c,p),fgammastep,xpeaks[p]-range,xpeaks[p]+range,6);
fus[d][c][p][2] = new TF1(Form("fcore_d%d_c%d_p%d_ga",d,c,p),fgammagaus,xpeaks[p]-range,xpeaks[p]+range,6);
fus[d][c][p][0]->SetLineColor(5);
fus[d][c][p][1]->SetLineColor(4);
fus[d][c][p][2]->SetLineColor(2);
for(int k=0;k<3;k++){
fus[d][c][p][k]->SetLineWidth(1);
for(int l=0;l<6;l++)
fus[d][c][p][k]->SetParameter(l,fu[d][c][p]->GetParameter(l));
fus[d][c][p][k]->Draw("same");
}
}//peaks
//res[d*4+c] = 2.35*fu[d][c][1]->GetParameter(4)*(1332.492-1173.228)/(fu[d][c][1]->GetParameter(3)-fu[d][c][0]->GetParameter(3));
slope[d*4+c] = (1332.492-1173.228)/(fu[d][c][1]->GetParameter(3)-fu[d][c][0]->GetParameter(3));
offset[d*4+c] = (1332.492+1173.228)-slope[d*4+c]*(fu[d][c][1]->GetParameter(3)+fu[d][c][0]->GetParameter(3));
offset[d*4+c]*=0.5;
//cout << fu[d][c][0]->GetParameter(3)*slope[d*4+c] + offset[d*4+c] << "\t" << fu[d][c][1]->GetParameter(3)*slope[d*4+c] + offset[d*4+c] << endl;
res[d*4+c] = fu[d][c][1]->GetParameter(2);
det[d*4+c] = d*5+c;
output->SetValue(Form("Slope.d%d.c%d",d,c),slope[d*4+c]);
output->SetValue(Form("Offset.d%d.c%d",d,c),offset[d*4+c]);
//cout << det[d*4+c] <<"\t" << res[d*4+c] << endl;
//cout << fu[d][c][0]->GetParameter(4) <<"\t" << fu[d][c][1]->GetParameter(4) << endl;
//ca->cd(1+c*4+3);
//.........这里部分代码省略.........