C++ TCPClient::connected方法代码示例

void loop()
{
    if (client.connected())
    {
        while (client.available())
        {
            in(inmsg,1000);
            myInStr =inmsg;
            if (myInStr.indexOf(clientmsg)  >= 0) {
                digitalWrite(D7, 1);
                delay(50);
                digitalWrite(D7, 0);
                sprintf(outmsg,"%c",replymsg);
                out(outmsg);
//THIS WORKS TOO
//                IPAddress myIP = WiFi.localIP();
//                sprintf(outmsg, "%d.%d.%d.%d,%d,2,%d,3,4/e", myIP[0], myIP[1], myIP[2], myIP[3],counter,simulate_temp);
//                out(outmsg); //but don't yet have a tcpclient that can handle such a response
            }//if (myInStr.indexOf("7")  >= 0)
        }//while (client.available())
    }//if (client.connected())
    client.read();
    client.flush();
//    client.stop(); //apparently unnecessary
    client = server.available();
 //keep connection alive long enough for client to receive reply
    lastTime = millis();
    while ( millis()-lastTime < 300) {}
}//loop

int sendRequest (byte* host, unsigned short port, char* response, unsigned short responseSize, boolean keepAlive)
{
  if (myClient.connected() || myClient.connect(host, port)) {
      uint32_t startTime = millis();

      myClient.write((const uint8_t *)mainbuffer, strlen(mainbuffer));
      myClient.flush();

      while(!myClient.available() && (millis() - startTime) < 5000){
          SPARK_WLAN_Loop();
      };

      while(myClient.available()) {
          readbytes = myClient.read((uint8_t*) response, responseSize);
          if (readbytes == -1) break;
      }

      myClient.flush();

      if(!keepAlive) {
        myClient.stop();
      }

  } else {
      // unable to connect
      return 1;
  }

  return 0;
}

void tcpKeepAlive() {
    unsigned long now = millis();
    if (tcp.connected()) {
        if (now > kaTimer) {
            tcp.flush();
            tcpLog("ENQ"); // For logger view 
            tcp.print(ENQ); // Heartbeat signal
            kaWait = now + 500;
            kaWaiting = true;
            tcpKeepAliveReset();
        }
        if (kaWaiting && (kaWait > now)) {
            if (tcp.available()) {
                char read = tcp.read();
                if (read == ACK) {
                    // tcpLog("ACK");
                    kaWaiting = false;
                }
            }
        } else if (kaWaiting && kaWait < now) {
            tcpLog("Timed out");
            kaWaiting = false;
            tcp.flush();
            tcp.stop();
        }
    }
}

void loop() {
  delay(1);
  if (!WiFi.ready()) {
    Particle.process();
    WiFi.connect();
    while(WiFi.connecting()) {Particle.process();}
  }// if (!WiFi.ready())
  else
  {
    complete = false;
    lastTime = millis();
    while ((!complete) &&  (millis() - lastTime < 10000)){
      if (client.connect( server, serverPort)) {
        if (client.connected()) {
          out(clientmsg);
          lastTime = millis();
           while ((!client.available()) && (millis() - lastTime < 10000)) {Particle.process();}//wait for response
            in(inmsg,10);//10 pure trial and error
            myInStr =inmsg;
            if (myInStr.indexOf(replymsg)  >= 0) {
              digitalWrite(D7, 1);          // Flashes the LED
              lastTime = millis();
              while ( millis()-lastTime < 5) { } //5
              digitalWrite(D7, 0);          // Flashes the LED
              complete = true;
            }//if (myInStr.indexOf(replymsg)  >= 0)
        }//if (client.connected())
      }//if (client.connect( server, serverPort))
    }//while (!complete)
  }//else
}//loop

int tcpLog(String message) {
    if (tcp.connected()) {
        tcp.print(STX + Spark.deviceID() + ETX + message + EOT);
        delay(250); // try not to flood socket with too many writes
        return 1;
    } else {
        return -1;
    }
}

void loop() {
  if (client.connected()) {
    Firmata.sendString("Hello World!");
    delay(1000);
  } else {
    Serial.println("Disconnected.");
    client.stop();
    while(1) {}; // loop forever  
  }
}

void loop() {

    if (clientWww.connected()) {

        int position = 0;
        int canI = 0;

        // echo all available bytes back to the client
        while (clientWww.available()) {

            char c = clientWww.read();
            char url[200];

            // Detect space
            if(c == 32) {

                canI = !canI;

            }

            // Save only data in between spaces
            if(canI) {

                // Discard spaces
                if(c != 32) {

                    url[position++] = c;

                }

            }

            // Detect end of the line
            if(c == 10) {

                // Null terminate our array
                url[position + 1] = 0;

                response(url);

                // Discard the rest of the header
                clientWww.flush();

            }

        }

    } else {

        // if no client is yet connected, check for a new connection
        clientWww = serverWww.available();

    }

}

void loop() {
  //low power
  WiFi.disconnect();
  System.sleep(D3, RISING, 4);
  if (digitalRead(D3)) {digitalWrite(D6,HIGH);delay(200);digitalWrite(D6,LOW);}

  while (!WiFi.ready()) {
    Particle.process();
    WiFi.connect();
    while(WiFi.connecting()){Particle.process();}
  }// while (!WiFi.ready())

  complete = false;

  //don't unsuccessfully persist beyond 10 secs, just go back to sleep
  lastTime = millis();
  while ((!complete) &&  (millis() - lastTime < 10000)){

  if (client.connect( server, serverPort)) {
    if (client.connected()) {
     sprintf(outmsg,"%c",clientmsg);
     out(outmsg);

    lastTime = millis();
    while ((!client.available()) && (millis() - lastTime < 5000)) { }

    lastTime = millis();
    while ((millis() - lastTime < 300)) {}//plays better with nodejs server?

 //now get confirmation from server that server received msg
    while (client.available()) {
      read_char = client.read();
      if(read_char == replymsg ) { //we got confirmation
        digitalWrite(D7,HIGH);delay(10);digitalWrite(D7,LOW);
        client.read();
        complete = true;
      }//if(read_char == replymsg )
    }//while (client.available())
  }//if (client.connected())
}//if (client.connect( server, serverPort))

  client.read();
  client.flush();
//  client.stop();//apparently unnecessary

}//while (!complete)

// prevent nodejs ECONNRESET, not necessay with another photon??
  lastTime = millis();
  while ((millis() - lastTime < 500)) {}//prevent nodejs ECONNRESET

delay(1);
}//loop

void loop() {
  if (client.connected()) {
    if (client.available()) {
      char pin = client.read() - '0' + D0;
      char level = client.read();
      if ('h' == level) {
        digitalWrite(pin, HIGH);
      } else {
        digitalWrite(pin, LOW);
      }
    }
  }
}

void loop() {

    if (client.connected()) {

        client.write("I am the server sending you a message.");

        while(client.available()) {

            char c = client.read();
            Serial.print(c);

        }

    } else {

        client = server.available();

    }

}

void loop()
{
  // Now open your Serial Terminal, and hit any key to continue!
  if (Serial.available()) {
      char c = Serial.read();
  Serial.println(WiFi.localIP());
  Serial.println(WiFi.subnetMask());
  Serial.println(WiFi.gatewayIP());
  Serial.println(WiFi.SSID());
  }


    if (client.connected()) {
    // echo all available bytes back to the client
    while (client.available()) {
      server.write(client.read());
    }
  } else {
    // if no client is yet connected, check for a new connection
    client = server.available();
  }
}

/** Read data from client.
  @param data String to read the received data into.
  @param client TCPClient to get the data from.
*/
bool SparkWebSocketServer::getData(String &data, TCPClient &client)
{
    char buffer[packetLen];

    if(client.connected()) {
        while(client.available() == 0);

        for(int count = 0; client.available() > 0 && count < packetLen; count++) {
            buffer[count] = client.read();
        }

        if(packetHealth(buffer) != 0)
            return false;
        /*int failCount = 0;
        while(packetHealth(buffer) > 0) {
            // make room
            for(int i = 0; i < packetLen-1; i++)
                buffer[i] = buffer[i+1];

            while(client.available() == 0);

            buffer[packetLen-1] = client.read();

            failCount++;
        }

        if(failCount != 0)
            Serial.println(failCount);
        */

        for(int i = 0; i < dataLen; i++) {
            data += (char) (buffer[i+8] ^ buffer[4 + i % 4]);
        }
    }

    return true;
}

void loop() {



  if (client.connected()) {

    digitalWrite(D4,HIGH);
    digitalWrite(D0,HIGH);
    delay(200);
    digitalWrite(D4,LOW);
    digitalWrite(D0,LOW);

    while (client.available()) {

      digitalWrite(D4,HIGH);
      digitalWrite(D7,HIGH);
      delay(200);
      digitalWrite(D4,LOW);
      digitalWrite(D7,LOW);



      Serial.println();
      int val = client.read();
      Serial.println(val);

      netapp_ipconfig(&ipconfig);
      char connectedSSID[32];
      sprintf(connectedSSID, "%s", ipconfig.uaSSID);



      digitalWrite(D7,HIGH);
      delay(500);
      digitalWrite(D7,LOW);
      delay(500);

      long err = wlan_ioctl_get_scan_results(0, ucResults);
      int _numEntry = ((uint8_t) ucResults[3] << 24) | ((uint8_t) ucResults[2] << 16) | ((uint8_t) ucResults[1] << 8) | ((uint8_t) ucResults[0]);

      if (err == 0 && _numEntry > 0) {


        digitalWrite(D4,HIGH);
        delay(100);
        digitalWrite(D4,LOW);

        int _stat = ((uint8_t) ucResults[7] << 24) | ((uint8_t) ucResults[6] << 16) | ((uint8_t) ucResults[5] << 8) | ((uint8_t) ucResults[4]);
        bool _valid = (uint8_t) ucResults[8]  & 0x1;
        int _rssi = (uint8_t) ucResults[8] >> 1;
        int _mode = ((uint8_t) ucResults[9] | 0xC0) & 0x3;
        int _ssidlen = (uint8_t) ucResults[9] >> 2;

        char ssid[32];
        int idx = 0;
        while(idx < _ssidlen) {
          ssid[idx] = ucResults[idx+12];
          idx++;
        }
        ssid[_ssidlen] = (char) NULL;

        if (strcmp(connectedSSID, ssid) == 0){

          digitalWrite(D0,HIGH);
          delay(100);
          digitalWrite(D0,LOW);


          Serial.print("WiFi scan status: ");
          server.write("WiFi scan status: ");
          switch (_stat) {
            case 0:
            Serial.print("aged, ");
            server.write("aged, ");
            break;
            case 1:
            Serial.print("valid, ");
            server.write("valid, ");
            break;
            case 2:
            Serial.print("no results, ");
            server.write("no results, ");
            break;
          }

          Serial.print(_numEntry);
          Serial.print(" nets found. ");
          Serial.print(ssid);

          server.write(_numEntry);
          server.write(" nets found. ");
          server.write(ssid);

          if (_valid){
            Serial.print(" is valid, RSSI: ");
            server.write(" is valid, RSSI: ");
          }
          else{
            Serial.print("not valid, RSSI: ");
            server.write("not valid, RSSI: ");
//.........这里部分代码省略.........

char * http_get(char const * hostname, String path) {

    int i = 0;
    int j = 0;
    int k = 0;
    bool printOnce = false;

    if (client.connect(hostname, 80)) {
        client.print("GET ");
        client.print(path);
        client.println(" HTTP/1.1");
        client.print("HOST: ");
        client.println(hostname);
        client.println("Connection: close");
        client.println();
        client.flush();
    } else {
        if(DEBUG_SERIAL) Serial.println("\r\n\r\nConnection Failed!");
        client.flush();
        client.stop();
        return NULL;
    }

    // wait 5 seconds or less for the host to respond
    uint32_t startTime = millis();
    while(!client.available() && (millis() - startTime) < 5000);

    if(DEBUG_SERIAL) Serial.println("\r\n\r\nREADING HOST DATA......");
    uint32_t lastRead = millis();
    // If the host doesn't close it's connection, we'll timeout in 10 seconds.
    while (client.connected() && (millis() - lastRead) < 10000) {
        while (client.available()) {
            char c = client.read();
            /*
            if(DEBUG_SERIAL) {
              Serial.print(c);
              if(i++ > 100) {
                delay(5);
                i = 0;
              }
            }
            */
            if(c == -1) {
                Serial.print("\r\n\r\nERROR......\r\n\r\n");
                client.flush();
                client.stop();
            }
            if(j++ >= SKIP_CHARS) { // don't buffer the first X bytes to save memory
                if(DEBUG_SERIAL && !printOnce) {
                    Serial.print("\r\n\r\nSAVING......\r\n\r\n");
                    printOnce = true;
                }
                buffer[k++] = c; // save character to buffer
                Serial.print(c);
                delayMicroseconds(100);
                if(k >= BUFFER_SIZE_MAX) { // if we reach the end of our buffer, just bail.
                    Serial.print("\r\n\r\nOUT OF BUFFER SPACE......\r\n\r\n");
                    client.flush();
                    client.stop();
                }
            }
            // as long as we're reading data, reset the lastRead time.
            lastRead = millis();
        } // END while(client.available())
    } // END while(client.connected())

    client.flush();
    client.stop();

    if(DEBUG_SERIAL) {
        Serial.print("\r\nCHARACTERS RECEIVED: ");
        Serial.println(SKIP_CHARS + k);
    }

    return buffer;
}

void loop()
{
    int debug = digitalRead(debug_tx);
    
    if(!digitalRead(waitpin_C)){
        // Skip mode, to ensure bootloader stays available
        char buffer[32];
        sprintf(buffer,"skip state: %d\r\n",state);
        Serial1.print(buffer);
        digitalWrite(led, HIGH);   // Turn ON the LED       
        delay(100);
        return;
    }else{
        digitalWrite(led, LOW);   // Turn OFF the LED  
    }

    delay(1);
    switch(state){
        case 0:
            // Waiting for next time
            wait-=10;
            if(wait<0){
                wait = 0;
                state = 1;
            }
            break;
        case 1:
            // Connecting
            if(debug) Serial1.println("connecting");
            if (client.connect(server, 80)){
                if(debug) Serial1.println("connected");
                state = 2;
            }else{
                if(debug) Serial1.println("connection failed state 1");
                wait = RETRY_INTERVAL;
                state = 0;
            }
            break;
        case 2:
            // Requesting
            tries = 0;
            store = 0;
            hash = 0;
            command_i = 0;
            for(int i=0; i<COMMAND_SIZE; i++) command[i] = 0;
            if(client.connected()){
                if(debug) client.println("GET // HTTP/1.0\r\n\r\n");
                wait = RESPONSE_INTERVAL;
                state = 3;
            }else{
                if(debug) Serial1.println("connection lost state 2");
                wait = RETRY_INTERVAL;
                state = 0;
            }
            break;
        case 3:
            // Receiving
            if(client.connected()){
                if (client.available() > 0) 
                {
                    // Print response to serial
                    char c = client.read();
                    if(debug) Serial1.print(c);
                    
                    // If last expected char found, quit reading
                    if(c =='>') hash = 1;
                    // If first char of data found, start storing the string
                    if(c =='<') store = 1;
                    if(store){
                        command[command_i++] = c;
                    }
                }else{
                    if(debug) Serial1.println("nd s3 ");  
                    delay(100);
                }
                // Quit reading
                if(hash){
                    Serial1.println();
                    state = 4;
                }
            }else{
                // We lost connection
                if(debug) Serial1.println("connection lost state 3");
                wait = RETRY_INTERVAL;
                state = 0;
            }
            break;
        case 4:
            // Disconnecting
            if(client.connected()){
                client.stop();
                if(debug) Serial1.println("connection closed state 4");
                wait = RENEW_INTERVAL;
                state = 5;
            }else{
                if(debug) Serial1.println("connection closed by server state 4");
                wait = RENEW_INTERVAL;
                state = 5; 
            }
            break;
//.........这里部分代码省略.........