本文整理汇总了C++中SysStaff::show方法的典型用法代码示例。如果您正苦于以下问题:C++ SysStaff::show方法的具体用法?C++ SysStaff::show怎么用?C++ SysStaff::show使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类SysStaff
的用法示例。
在下文中一共展示了SysStaff::show方法的6个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: paint
void ContinuousPanel::paint(const QRect&, QPainter& painter)
{
qreal _offsetPanel = 0;
qreal _y = 0;
qreal _oldWidth = 0; // The last final panel width
qreal _newWidth = 0; // New panel width
qreal _height = 0;
qreal _leftMarginTotal = 0; // Sum of all elments left margin
qreal _panelRightPadding = 5; // Extra space for the panel after last element
Measure* measure = _score->firstMeasure();
if (!_active || !measure) {
_visible = false;
return;
}
if (measure->mmRest()) {
measure = measure->mmRest();
}
System* system = measure->system();
if (system == 0) {
_visible = false;
return;
}
Segment* s = measure->first();
double _spatium = _score->spatium();
if (_width <= 0)
_width = s->x();
//
// Set panel height for whole system
//
_height = 6 * _spatium;
_y = system->staffYpage(0) + system->page()->pos().y();
double y2 = 0.0;
for (int i = 0; i < _score->nstaves(); ++i) {
SysStaff* ss = system->staff(i);
if (!ss->show() || !_score->staff(i)->show())
continue;
y2 = ss->y() + ss->bbox().height();
}
_height += y2 + 6*_spatium;
_y -= 6 * _spatium;
//
// Check elements at current panel position
//
_offsetPanel = -(_sv->xoffset()) / _sv->mag();
_rect = QRect(_offsetPanel + _width, _y, 1, _height);
Page* page = _score->pages().front();
QList<Element*> el = page->items(_rect);
if (el.empty()) {
_visible = false;
return;
}
qStableSort(el.begin(), el.end(), elementLessThan);
const Measure*_currentMeasure = 0;
for (const Element* e : el) {
e->itemDiscovered = 0;
if (!e->visible() && !_score->showInvisible())
continue;
if (e->isMeasure()) {
_currentMeasure = toMeasure(e);
break;
}
}
if (!_currentMeasure)
return;
// Don't show panel if staff names are visible
if (_currentMeasure == _score->firstMeasure() && _sv->toPhysical(_currentMeasure->canvasPos()).x() > 0) {
_visible = false;
return;
}
qreal _xPosMeasure = _currentMeasure->canvasX();
qreal _measureWidth = _currentMeasure->width();
int tick = _currentMeasure->tick();
Fraction _currentTimeSig = _currentMeasure->timesig();
//qDebug() << "_sv->xoffset()=" <<_sv->xoffset() << " _sv->mag()="<< _sv->mag() <<" s->x=" << s->x() << " width=" << _width << " currentMeasure=" << _currentMeasure->x() << " _xPosMeasure=" << _xPosMeasure;
//---------------------------------------------------------
// findElementWidths
// determines the max width for each element types
//---------------------------------------------------------
// The first pass serves to get the maximum width for each elements
qreal lineWidthName = 0;
qreal _widthClef = 0;
qreal _widthKeySig = 0;
qreal _widthTimeSig = 0;
qreal _xPosTimeSig = 0;
for (const Element* e : el) {
//.........这里部分代码省略.........
示例2: if
void System::layout2()
{
VBox* b = vbox();
if (b) {
b->layout();
setbbox(b->bbox());
return;
}
setPos(0.0, 0.0);
QList<std::pair<int,SysStaff*>> visibleStaves;
int firstStaffIdx = -1;
int lastStaffIdx = 0;
int firstStaffInitialIdx = -1;
int lastStaffInitialIdx = 0;
Measure* fm = firstMeasure();
for (int i = 0; i < _staves.size(); ++i) {
Staff* s = score()->staff(i);
SysStaff* ss = _staves[i];
if (s->show() && ss->show()) {
visibleStaves.append(std::pair<int,SysStaff*>(i, ss));
if (firstStaffIdx == -1)
firstStaffIdx = i;
if (i > lastStaffIdx)
lastStaffIdx = i;
if (fm && fm->visible(i)) {
if (firstStaffInitialIdx == -1)
firstStaffInitialIdx = i;
lastStaffInitialIdx = i;
}
}
else {
ss->setbbox(QRectF()); // already done in layout() ?
}
}
if (firstStaffIdx == -1)
firstStaffIdx = 0;
if (firstStaffInitialIdx == -1)
firstStaffInitialIdx = 0;
qreal _spatium = spatium();
qreal y = 0.0;
qreal minVerticalDistance = score()->styleP(StyleIdx::minVerticalDistance);
qreal staffDistance = score()->styleP(StyleIdx::staffDistance);
qreal akkoladeDistance = score()->styleP(StyleIdx::akkoladeDistance);
if (visibleStaves.empty()) {
qDebug("====no visible staves, staves %d, score staves %d", _staves.size(), score()->nstaves());
}
for (auto i = visibleStaves.begin();; ++i) {
SysStaff* ss = i->second;
int si1 = i->first;
Staff* staff = score()->staff(si1);
auto ni = i + 1;
qreal h = staff->height();
if (ni == visibleStaves.end()) {
ss->setYOff(staff->lines() == 1 ? _spatium * staff->mag() : 0.0);
ss->bbox().setRect(_leftMargin, y, width() - _leftMargin, h);
break;
}
int si2 = ni->first;
qreal dist = h;
switch (staff->innerBracket()) {
case BracketType::BRACE:
dist += akkoladeDistance;
break;
case BracketType::NORMAL:
case BracketType::SQUARE:
case BracketType::LINE:
case BracketType::NO_BRACKET:
dist += staffDistance;
break;
}
dist += score()->staff(si2)->userDist();
for (MeasureBase* mb : ml) {
if (!mb->isMeasure())
continue;
Measure* m = toMeasure(mb);
Shape& s1 = m->staffShape(si1);
Shape& s2 = m->staffShape(si2);
qreal d = s1.minVerticalDistance(s2) + minVerticalDistance;
dist = qMax(dist, d);
Spacer* sp = m->mstaff(si1)->_vspacerDown;
if (sp) {
if (sp->spacerType() == SpacerType::FIXED) {
dist = staff->height() + sp->gap();
break;
}
else
dist = qMax(dist, staff->height() + sp->gap());
}
//.........这里部分代码省略.........
示例3: layoutSystem
void System::layoutSystem(qreal xo1)
{
if (_staves.empty()) // ignore vbox
return;
static const Spatium instrumentNameOffset(1.0); // TODO: make style value
int nstaves = _staves.size();
//---------------------------------------------------
// find x position of staves
// create brackets
//---------------------------------------------------
qreal xoff2 = 0.0; // x offset for instrument name
int bracketLevels = 0;
for (int idx = 0; idx < nstaves; ++idx)
bracketLevels = qMax(bracketLevels, score()->staff(idx)->bracketLevels());
qreal bracketWidth[bracketLevels];
for (int i = 0; i < bracketLevels; ++i)
bracketWidth[i] = 0.0;
QList<Bracket*> bl;
bl.swap(_brackets);
for (int staffIdx = 0; staffIdx < nstaves; ++staffIdx) {
Staff* s = score()->staff(staffIdx);
for (int i = 0; i < bracketLevels; ++i) {
if (s->bracket(i) == BracketType::NO_BRACKET)
continue;
int firstStaff = staffIdx;
int lastStaff = staffIdx + s->bracketSpan(i) - 1;
if (lastStaff >= nstaves)
lastStaff = nstaves - 1;
for (; firstStaff <= lastStaff; ++firstStaff) {
if (score()->staff(firstStaff)->show())
break;
}
for (; lastStaff >= firstStaff; --lastStaff) {
if (score()->staff(lastStaff)->show())
break;
}
int span = lastStaff - firstStaff + 1;
//
// do not show bracket if it only spans one
// system due to some invisible staves
//
if ((span > 1) || (s->bracketSpan(i) == span)) {
//
// this bracket is visible
//
Bracket* b = 0;
int track = staffIdx * VOICES;
for (int k = 0; k < bl.size(); ++k) {
if (bl[k]->track() == track && bl[k]->level() == i) {
b = bl.takeAt(k);
break;
}
}
if (b == 0) {
b = new Bracket(score());
b->setGenerated(true);
b->setTrack(track);
b->setLevel(i);
}
add(b);
b->setFirstStaff(firstStaff);
b->setLastStaff(lastStaff);
b->setBracketType(s->bracket(i));
b->setSpan(s->bracketSpan(i));
bracketWidth[i] = qMax(bracketWidth[i], b->width());
}
}
if (!s->show())
continue;
for (InstrumentName* t : _staves[staffIdx]->instrumentNames) {
t->layout();
qreal w = t->width() + point(instrumentNameOffset);
if (w > xoff2)
xoff2 = w;
}
}
for (Bracket* b : bl)
delete b;
//---------------------------------------------------
// layout SysStaff and StaffLines
//---------------------------------------------------
_leftMargin = xoff2;
qreal bd = score()->styleP(StyleIdx::bracketDistance);
if ( _brackets.size() > 0) {
for (int i = 0; i < bracketLevels; ++i)
_leftMargin += bracketWidth[i] + bd;
//.........这里部分代码省略.........
示例4: move
void PositionCursor::move(int tick)
{
QRectF r(bbox());
//
// set mark height for whole system
//
if (_type == CursorType::LOOP_OUT)
tick --;
Score* score = _sv->score();
Measure* measure = score->tick2measureMM(tick);
if (measure == 0)
return;
qreal x;
int offset = 0;
Segment* s;
for (s = measure->first(Segment::Type::ChordRest); s;) {
int t1 = s->tick();
int x1 = s->canvasPos().x();
qreal x2;
int t2;
Segment* ns = s->next(Segment::Type::ChordRest);
if (ns) {
t2 = ns->tick();
x2 = ns->canvasPos().x();
}
else {
t2 = measure->endTick();
x2 = measure->canvasPos().x() + measure->width();
}
t1 += offset;
t2 += offset;
if (tick >= t1 && tick < t2) {
int dt = t2 - t1;
qreal dx = x2 - x1;
x = x1 + dx * (tick-t1) / dt;
break;
}
s = ns;
}
if (s == 0)
return;
System* system = measure->system();
if (system == 0)
return;
double y = system->staffYpage(0) + system->page()->pos().y();
double _spatium = score->spatium();
qreal mag = _spatium / (MScore::DPI * SPATIUM20);
double w = (_spatium * 2.0 + score->scoreFont()->width(SymId::noteheadBlack, mag))/3;
double h = 6 * _spatium;
//
// set cursor height for whole system
//
double y2 = 0.0;
for (int i = 0; i < score->nstaves(); ++i) {
SysStaff* ss = system->staff(i);
if (!ss->show() || !score->staff(i)->show())
continue;
y2 = ss->y() + ss->bbox().height();
}
h += y2;
y -= 3 * _spatium;
if (_type == CursorType::LOOP_IN) {
x = x - _spatium + w/1.5;
}
else {
x = x - _spatium * .5;
}
_tick = tick;
_rect = QRectF(x, y, w, h);
_sv->update(_sv->matrix().mapRect(r | bbox()).toRect().adjusted(-1,-1,1,1));
}
示例5: if
void System::layout2()
{
if (isVbox()) // ignore vbox
return;
int nstaves = _staves.size();
qreal _spatium = spatium();
qreal y = 0.0;
int lastStaffIdx = 0; // last visible staff
int firstStaffIdx = -1;
qreal lastStaffDistanceDown = 0.0;
for (int staffIdx = 0; staffIdx < nstaves; ++staffIdx) {
Staff* staff = score()->staff(staffIdx);
StyleIdx downDistance;
qreal userDist = 0.0;
if ((staffIdx + 1) == nstaves) {
//
// last staff in system
//
MeasureBase* mb = ml.last();
bool nextMeasureIsVBOX = false;
if (mb->next()) {
Element::Type type = mb->next()->type();
if (type == Element::Type::VBOX || type == Element::Type::TBOX || type == Element::Type::FBOX)
nextMeasureIsVBOX = true;
}
downDistance = nextMeasureIsVBOX ? StyleIdx::systemFrameDistance : StyleIdx::minSystemDistance;
}
else if (staff->rstaff() < (staff->part()->staves()->size()-1)) {
//
// staff is not last staff in a part
//
downDistance = StyleIdx::akkoladeDistance;
userDist = score()->staff(staffIdx + 1)->userDist();
}
else {
downDistance = StyleIdx::staffDistance;
userDist = score()->staff(staffIdx + 1)->userDist();
}
SysStaff* s = _staves[staffIdx];
qreal distDown = score()->styleS(downDistance).val() * _spatium + userDist;
qreal nominalDistDown = distDown;
qreal distUp = 0.0;
int n = ml.size();
for (int i = 0; i < n; ++i) {
MeasureBase* m = ml.at(i);
distDown = qMax(distDown, m->distanceDown(staffIdx));
distUp = qMax(distUp, m->distanceUp(staffIdx));
}
s->setDistanceDown(distDown);
s->setDistanceUp(distUp);
if (!staff->show() || !s->show()) {
s->setbbox(QRectF()); // already done in layout() ?
continue;
}
qreal sHeight = staff->height();
qreal dup = staffIdx == 0 ? 0.0 : s->distanceUp();
if (staff->lines() == 1)
dup -= _spatium * staff->mag();
s->bbox().setRect(_leftMargin, y + dup, width() - _leftMargin, sHeight);
y += dup + sHeight + s->distanceDown();
lastStaffIdx = staffIdx;
lastStaffDistanceDown = distDown - nominalDistDown;
if (firstStaffIdx == -1)
firstStaffIdx = staffIdx;
}
if (firstStaffIdx == -1)
firstStaffIdx = 0;
qreal systemHeight = staff(lastStaffIdx)->bbox().bottom();
if (lastStaffIdx < nstaves - 1)
systemHeight += lastStaffDistanceDown;
setHeight(systemHeight);
int n = ml.size();
for (int i = 0; i < n; ++i) {
MeasureBase* m = ml.at(i);
if (m->type() == Element::Type::MEASURE) {
// note that the factor 2 * _spatium must be corrected for when exporting
// system distance in MusicXML (issue #24733)
m->bbox().setRect(0.0, -_spatium, m->width(), systemHeight + 2 * _spatium);
}
else if (m->type() == Element::Type::HBOX) {
m->bbox().setRect(0.0, 0.0, m->width(), systemHeight);
static_cast<HBox*>(m)->layout2();
}
}
if (_barLine) {
_barLine->setTrack(firstStaffIdx * VOICES);
_barLine->setSpan(lastStaffIdx - firstStaffIdx + 1);
if (score()->staff(0)->lines() == 1)
_barLine->setSpanFrom(BARLINE_SPAN_1LINESTAFF_FROM);
int spanTo = (score()->staff(lastStaffIdx)->lines() == 1) ?
BARLINE_SPAN_1LINESTAFF_TO :
(score()->staff(lastStaffIdx)->lines()-1)*2;
//.........这里部分代码省略.........
示例6: paint
void ContinuousPanel::paint(const QRect& /*r*/, QPainter& p)
{
if (!_active) {
_visible = false;
return;
}
Measure* measure = _score->tick2measure(0);
if (measure == 0){
_visible = false;
return;
}
if (measure->mmRest()) {
measure = measure->mmRest();
_mmRestCount = measure->mmRestCount();
}
System* system = measure->system();
if (system == 0) {
_visible = false;
return;
}
Segment* s = _score->tick2segment(0);
double _spatium = _score->spatium();
_x = 0;
if (_width <= 0)
_width = s->x();
//
// Set panel height for whole system
//
_height = 6 * _spatium;
_y = system->staffYpage(0) + system->page()->pos().y();
double y2 = 0.0;
for (int i = 0; i < _score->nstaves(); ++i) {
SysStaff* ss = system->staff(i);
if (!ss->show() || !_score->staff(i)->show())
continue;
y2 = ss->y() + ss->bbox().height();
}
_height += y2 + 6*_spatium;
_y -= 6 * _spatium;
//
// Check elements at current panel position
//
_offsetPanel = -(_sv->xoffset()) / _sv->pmag();
_rect = QRect(_offsetPanel + _width, _y, 1, _height);
//qDebug() << "width=" << _width << "_y="<< _y << "_offsetPanel=" << _offsetPanel << "_sv->xoffset()" << _sv->xoffset() << "_sv->pmag()" << _sv->pmag() <<"_spatium" << _spatium << "s->canvasPos().x()" << s->canvasPos().x() << "s->x()" << s->x();
Page* page = _score->pages().front();
QList<Element*> elementsCurrent = page->items(_rect);
if (elementsCurrent.empty()) {
_visible = false;
return;
}
qStableSort(elementsCurrent.begin(), elementsCurrent.end(), elementLessThan);
_currentMeasure = nullptr;
for (const Element* e : elementsCurrent) {
e->itemDiscovered = 0;
if (!e->visible()) {
if (_score->printing() || !_score->showInvisible())
continue;
}
if (e->type() == Element::Type::MEASURE) {
_currentMeasure = static_cast<const Measure*>(e);
_currentTimeSig = _currentMeasure->timesig();
_currentMeasureTick = _currentMeasure->tick();
_currentMeasureNo = _currentMeasure->no();
// Find number of multi measure rests to display in the panel
if (_currentMeasure->isMMRest())
_mmRestCount = _currentMeasure->mmRestCount();
else if (_currentMeasure->mmRest())
_mmRestCount = _currentMeasure->mmRest()->mmRestCount();
else
_mmRestCount = 0;
_xPosMeasure = e->canvasX();
_measureWidth = e->width();
break;
}
}
if (_currentMeasure == nullptr)
return;
findElementWidths(elementsCurrent);
// Don't show panel if staff names are visible
if (_sv->xoffset() / _sv->pmag() + _xPosMeasure > 0) {
_visible = false;
return;
}
//qDebug() << "_sv->xoffset()=" <<_sv->xoffset() << " _sv->pmag()="<< _sv->pmag() <<" s->x=" << s->x() << " width=" << _width << " currentMeasue=" << _currentMeasure->x() << " _xPosMeasure=" << _xPosMeasure;
draw(p, elementsCurrent);
_visible = true;
}