C++ SnifferConfiguration::set_promisc_mode方法代码示例

 result_type trace() {
     SnifferConfiguration config;
     config.set_promisc_mode(false);
     // ICMPs that aren't sent from us.
     config.set_filter(
         "ip proto \\icmp and not src host " + iface.addresses().ip_addr.to_string());
     Sniffer sniffer(iface.name(), config);
     
     PacketSender sender;
     // Create our handler
     auto handler = bind(
         &Traceroute::sniff_callback, 
         this, 
         std::placeholders::_1
     );
     // We're running
     running = true;
     // Start the sniff thread
     thread sniff_thread(
         [&]() {
             sniffer.sniff_loop(handler);
         }
     );
     send_packets(sender);
     sniff_thread.join();
     // If the final hop responded, add its address at the appropriate ttl
     if (lowest_dest_ttl != numeric_limits<int>::max()) {
         results[lowest_dest_ttl] = addr;
     }
     // Clear our results and return what we've found
     return move(results);
 }

 result_type trace() {
     // ICMPs that aren't sent from us.
     SnifferConfiguration config;
     config.set_snap_len(500);
     config.set_promisc_mode(false);
     config.set_filter(
         "ip proto \\icmp and not src host " + iface.addresses().ip_addr.to_string());
     Sniffer sniffer(iface.name(), config);
     
     PacketSender sender;
     // Create our handler
     auto handler = std::bind(
         &Traceroute::sniff_callback, 
         this, 
         std::placeholders::_1
     );
     // We're running
     running = true;
     // Start the sniff thread
     std::thread sniff_thread(
         &Sniffer::sniff_loop<decltype(handler)>, 
         &sniffer, 
         handler,
         0
     );
     send_packets(sender);
     sniff_thread.join();
     // Clear our results and return what we've found
     return std::move(results);
 }

Sniffer::Sniffer(const string& device, 
                 promisc_type promisc,
                 const string& filter,
                 bool rfmon) {
    SnifferConfiguration configuration;
    configuration.set_promisc_mode(promisc == PROMISC);
    configuration.set_filter(filter);
    configuration.set_rfmon(rfmon);

    char error[PCAP_ERRBUF_SIZE];
    pcap_t* phandle = pcap_create(TINS_PREFIX_INTERFACE(device).c_str(), error);
    if (!phandle) {
        throw runtime_error(error);
    }
    set_pcap_handle(phandle);

    // Set the netmask if we are able to find it.
    bpf_u_int32 ip, if_mask;
    if (pcap_lookupnet(TINS_PREFIX_INTERFACE(device).c_str(), &ip, &if_mask, error) == 0) {
        set_if_mask(if_mask);
    }

    // Configure the sniffer's attributes prior to activation.
    configuration.configure_sniffer_pre_activation(*this);

    // Finally, activate the pcap. In case of error throw runtime_error
    if (pcap_activate(get_pcap_handle()) < 0) {
        throw pcap_error(pcap_geterr(get_pcap_handle()));
    }

    // Configure the sniffer's attributes after activation.
    configuration.configure_sniffer_post_activation(*this);
}

int main(int argc, char* argv[]) {
    string iface;
    if (argc == 2) {
        // Use the provided interface
        iface = argv[1];
    }
    else {
        // Use the default interface
        iface = NetworkInterface::default_interface().name();
    }
    try {
        SnifferConfiguration config;
        config.set_promisc_mode(true);
        config.set_filter("udp and port 53");
        Sniffer sniffer(iface, config);
        dns_monitor monitor;
        thread thread(
            [&]() {
                monitor.run(sniffer);
            }
        );
        while (true) {
            auto info = monitor.stats().get_information();
            cout << "\rAverage " << info.average.count() 
                << "ms. Worst: " << info.worst.count() << "ms. Count: "
                << info.count << "   ";
            cout.flush();
            sleep_for(seconds(1));
        }
    }
    catch (exception& ex) {
        cout << "[-] Error: " << ex.what() << endl;
    }
}

void BeaconSniffer::run(const std::string& iface) {
    SnifferConfiguration config;
    config.set_promisc_mode(true);
    config.set_filter("type mgt subtype beacon");
    config.set_rfmon(true);
    Sniffer sniffer(iface, config);
    sniffer.sniff_loop(make_sniffer_handler(this, &BeaconSniffer::callback));
}

	PDU& PacketSenderGeneric::send_recv(PDU& spdu, SharedSender& shared_sender, const NetworkInterface& iface, bool promisc, double* rdelay, double* edelay)
	{	
		//wait for previous packet to receive response (TODO: not ideal, plan future change)
		while (sent_pdu) {
			std::this_thread::sleep_for(std::chrono::milliseconds(1000));
		}
		sent_pdu = spdu.clone();

		//start sniff task
		SnifferConfiguration config;
		config.set_promisc_mode(promisc);
		config.set_snap_len(65535);
		config.set_timeout(10);

		//Critical section
		SHARED_SNIFFER_MUTEX.lock();
		Sniffer sniffer{ iface.name(), config };
		SHARED_SNIFFER_MUTEX.unlock();

		bool compute_delay = true;
		if (!rdelay)
			compute_delay = false;
		std::future<void> fresp(std::async(std::launch::async, &PacketSenderGeneric::sniff_task, this, &sniffer, compute_delay));

		//send packet
		std::clock_t effective_sent_time = std::clock();
		std::cout << "Registering packet to send !" << std::endl;
		shared_sender.register_packet(sent_pdu, NetworkInterface(iface));

		//std::cout << "waiting for max " << timeout << "..." << std::endl;
		std::future_status status = fresp.wait_for(std::chrono::seconds(timeout));

		//raise exception in case of timeout
		if (status == std::future_status::timeout)
		{
			sniffer.stop_sniff();
			sent_pdu = NULL;
			throw timeout_elapsed();
		}
		else if (status == std::future_status::deferred)
			std::cout << "DEBUG: packet sniffing deffered... shouldn't happen";

		//Treat response packet
		if (edelay)
			*edelay = ((std::clock() - effective_sent_time) / (double)CLOCKS_PER_SEC) * 1000;
		if (rdelay) {
			*rdelay = response_delay;
		}

		PDU& response(*this->response_pdu);

		//Clean
		sent_pdu = NULL;
		response_delay = NULL;
		//response_pdu = NULL;

		return response;
	}

int main() {
    SnifferConfiguration config;
    Sniffer("wlan0", config).sniff_loop(callback);
    //config.set_filter("ip.addr == 192.168.5.20");
    config.set_promisc_mode(true);
    //config.set_snap_len(400);


//	config.set_filter("ip.addr == 192.168.5.20");
	//config.set_filter("port=3128");
}

void InfoWriter::process() {
    SnifferConfiguration config;
    config.set_promisc_mode(true);
    try {
        config.set_filter(filter.toLower().toStdString());
        sniffer = new Sniffer(NetworkInterface::default_interface().name(),config);
        sniffer->sniff_loop(std::tr1::bind(&InfoWriter::callback, this, std::placeholders::_1));
    } catch (std::exception e) {
        emit error(QString::fromStdString(e.what()));
    }
}

int main(int argc, char *argv[]) {
    if(argc != 2) {
        std::cout << "Usage: " << *argv << " <DEVICE>\n";
        return 1;
    }
    // Only sniff beacons
    SnifferConfiguration config;
    config.set_snap_len(2000);
    config.set_promisc_mode(true);
    config.set_filter("wlan type mgt subtype beacon");
    Sniffer sniffer(argv[1], config);
    sniffer.sniff_loop(handler);
}

int main(int argc, char *argv[]) 
{
    if(argc != 2) {
        std::cout << "Usage: " << *argv << " <interface>\n";
        return 1;
    }
    arp_monitor monitor;
    // Sniffer configuration
    SnifferConfiguration config;
    config.set_promisc_mode(true);
    config.set_filter("arp");

    // Sniff on the provided interface in promiscuous mode
    Sniffer sniffer(argv[1], config);
    
    // Only capture arp packets
    monitor.run(sniffer);
}

int main(int argc, char* argv[]) {
    if(argc != 2) {
        cout << "Usage: " <<* argv << " <interface>" << endl;
        return 1;
    }
    arp_monitor monitor;
    // Sniffer configuration
    SnifferConfiguration config;
    config.set_promisc_mode(true);
    config.set_filter("arp");

    try {
        // Sniff on the provided interface in promiscuous mode
        Sniffer sniffer(argv[1], config);
        
        // Only capture arp packets
        monitor.run(sniffer);
    }
    catch (std::exception& ex) {
        std::cerr << "Error: " << ex.what() << std::endl;
    }
}

int main(int argc, char *argv[])
{
	pcap_if_t *alldevs;
	pcap_if_t *d;
	int inum;
	int i = 0;
	char errbuf[PCAP_ERRBUF_SIZE];

	/* Retrieve the device list */
	if (pcap_findalldevs(&alldevs, errbuf) == -1)
	{
		fprintf(stderr, "Error in pcap_findalldevs: %s\n", errbuf);
		exit(1);
	}

	/* Print the list */
	for (d = alldevs; d; d = d->next)
	{
		printf("%d. %s", ++i, d->name);
		if (d->description)
			printf(" (%s)\n", d->description);
		else
			printf(" (No description available)\n");
	}

	if (i == 0)
	{
		printf("\nNo interfaces found! Make sure WinPcap is installed.\n");
		return -1;
	}

	printf("Enter the interface number (1-%d):", i);
	scanf_s("%d", &inum);

	if (inum < 1 || inum > i)
	{
		printf("\nInterface number out of range.\n");
		/* Free the device list */
		pcap_freealldevs(alldevs);
		return -1;
	}

	/* Jump to the selected adapter */
	for (d = alldevs, i = 0; i< inum - 1; d = d->next, i++);

	arp_monitor monitor;
	// Sniffer configuration
	SnifferConfiguration config;
	config.set_promisc_mode(true);
	config.set_filter("arp");

	try {
		// Sniff on the provided interface in promiscuous mode
		std::string str_interface = std::string(d->name);
		std::string str_begin = "\\Device\\NPF_";

		// kill \Device\NPF_
		if (str_interface.find_first_of(str_begin) != std::string::npos){
			str_interface = &str_interface[0] + str_begin.length();
		}
		Sniffer sniffer(str_interface, config);

		// Only capture arp packets
		monitor.run(sniffer);
	}
	catch (std::exception& ex) {
		std::cerr << "Error: " << ex.what() << std::endl;
	}
	system("pause");
}