本文整理汇总了C++中SimpleTimer::setTimer方法的典型用法代码示例。如果您正苦于以下问题：C++ SimpleTimer::setTimer方法的具体用法？C++ SimpleTimer::setTimer怎么用？C++ SimpleTimer::setTimer使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类SimpleTimer的用法示例。
在下文中一共展示了SimpleTimer::setTimer方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: highCalibration
void ECCalibrateScreen::highCalibration()
{
myUTFT.clrScr();
myUTFT.setColor(255, 0, 0);
myUTFT.fillRect(0, 0, 220, 13);
myUTFT.setColor(255, 255, 255);
myUTFT.setBackColor(255, 0, 0);
myUTFT.drawLine(0, 14, 320, 14);
myUTFT.print("EC Calibration", CENTER, 1);
myUTFT.setBackColor(0, 0, 0);
myUTFT.print("Calibrate now with the high side liquid", LEFT, 30);
myUTFT.print("Place the sensor in the 3,000Us ", LEFT, 42);
myUTFT.print("calibration liquid. This process", LEFT, 54);
myUTFT.print("will take 5 minutes to complete", LEFT, 66);
myUTFT.print("Wait for process to finish before ", LEFT, 78);
myUTFT.print("removing the sensor from the liquid", LEFT, 90);
myUTFT.print("", LEFT, 102);
myUTFT.print("************************************", LEFT, 114);
myUTFT.print("Touch screen to continue", CENTER, 162);
waitForTouch();
myUTFT.clrScr();
inputstring = "C\r"; //set in continious mode
myUTFT.clrScr();
String thisSt = String(iSeconds);
myUTFT.print("Calibration in Progress", CENTER, 30);
myUTFT.print("Seconds left until ready " + thisSt, CENTER, 42);
simpleTimer.setTimer(3000, updateWaitScreen, /*100*/ 4); //Update screen every 3 seconds for 5 minues.
}示例2: lowCalibration
void ECCalibrateScreen::lowCalibration()
{
myUTFT.clrScr();
myUTFT.setColor(255, 0, 0);
myUTFT.fillRect(0, 0, 220, 13);
myUTFT.setColor(255, 255, 255);
myUTFT.setBackColor(255, 0, 0);
myUTFT.drawLine(0, 14, 320, 14);
myUTFT.print("EC Calibration", CENTER, 1);
myUTFT.setBackColor(0, 0, 0);
myUTFT.print("Calibrate now with the low side liquid", LEFT, 30);
myUTFT.print("Place the sensor in the 220Us", LEFT, 42);
myUTFT.print("calibration liquid. This process", LEFT, 54);
myUTFT.print("will take 5 mins to complete", LEFT, 66);
myUTFT.print("Wait for process to finish before ", LEFT, 78);
myUTFT.print("removing the sensor from the liquid", LEFT, 90);
myUTFT.print("", LEFT, 102);
myUTFT.print("************************************", LEFT, 114);
myUTFT.print("Touch screen to continue", CENTER, 162);
SwaitForTouch();
myUTFT.clrScr();
inputstring = "C\r"; //set in continious mode
String thisSt = String(12);
myUTFT.print("Calibration in Progress", CENTER, 30);
myUTFT.print("Seconds left until ready " + thisSt, CENTER, 42);
simpleTimer.setTimer(3000, updateLowWaitScreen, /*100*/ 4); //Update screen every 3 seconds for 5 minues.
//delay(2000); //Wait 2 seconds -- make 5mins
//Serial3.print(inputstring); //send command to sensor.
//inputstring = "Z2\r"; //set the sensor at this value.
//Serial3.print(inputstring); //need to send twice??
}