当前位置: 首页>>代码示例>>C++>>正文

C++ ShimClient::expect方法代码示例

本文整理汇总了C++中ShimClient::expect方法的典型用法代码示例。如果您正苦于以下问题：C++ ShimClient::expect方法的具体用法？C++ ShimClient::expect怎么用？C++ ShimClient::expect使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类ShimClient的用法示例。


在下文中一共展示了ShimClient::expect方法的14个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: test_keepalive_pings_with_outbound_qos0

int test_keepalive_pings_with_outbound_qos0() {
    IT("keeps a connection alive that only sends qos0 (takes 1 minute)");

    ShimClient shimClient;
    shimClient.setAllowConnect(true);

    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);

    byte publish[] = {0x30,0xe,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,0x70,0x61,0x79,0x6c,0x6f,0x61,0x64};

    for (int i = 0; i < 50; i++) {
        TRACE(i<<":");
        shimClient.expect(publish,16);
        rc = client.publish((char*)"topic",(char*)"payload");
        IS_TRUE(rc);
        IS_FALSE(shimClient.error());
        sleep(1);
        if ( i == 15 || i == 31 || i == 47) {
            byte pingreq[] = { 0xC0,0x0 };
            shimClient.expect(pingreq,2);
            byte pingresp[] = { 0xD0,0x0 };
            shimClient.respond(pingresp,2);
        }
        rc = client.loop();
        IS_TRUE(rc);
        IS_FALSE(shimClient.error());
    }

    END_IT
}
开发者ID:1125384055，项目名称:libraries，代码行数:35，代码来源:keepalive_spec.cpp

示例2: test_keepalive_pings_idle

int test_keepalive_pings_idle() {
    IT("keeps an idle connection alive (takes 1 minute)");

    ShimClient shimClient;
    shimClient.setAllowConnect(true);

    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);

    byte pingreq[] = { 0xC0,0x0 };
    shimClient.expect(pingreq,2);
    byte pingresp[] = { 0xD0,0x0 };
    shimClient.respond(pingresp,2);

    for (int i = 0; i < 50; i++) {
        sleep(1);
        if ( i == 15 || i == 31 || i == 47) {
            shimClient.expect(pingreq,2);
            shimClient.respond(pingresp,2);
        }
        rc = client.loop();
        IS_TRUE(rc);
    }

    IS_FALSE(shimClient.error());

    END_IT
}
开发者ID:1125384055，项目名称:libraries，代码行数:32，代码来源:keepalive_spec.cpp

示例3: test_publish_retained

int test_publish_retained() {
    IT("publishes retained");
    ShimClient shimClient;
    shimClient.setAllowConnect(true);

    byte payload[] = { 0x01,0x02,0x03,0x0,0x05 };
    int length = 5;

    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);

    byte publish[] = {0x31,0xc,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,0x1,0x2,0x3,0x0,0x5};
    shimClient.expect(publish,14);

    rc = client.publish((char*)"topic",payload,length,true);
    IS_TRUE(rc);

    IS_FALSE(shimClient.error());

    END_IT
}
开发者ID:schidler，项目名称:pubsubclient，代码行数:25，代码来源:publish_spec.cpp

示例4: test_keepalive_disconnects_hung

int test_keepalive_disconnects_hung() {
    IT("disconnects a hung connection (takes 30 seconds)");

    ShimClient shimClient;
    shimClient.setAllowConnect(true);

    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);

    byte pingreq[] = { 0xC0,0x0 };
    shimClient.expect(pingreq,2);

    for (int i = 0; i < 32; i++) {
        sleep(1);
        rc = client.loop();
    }
    IS_FALSE(rc);

    int state = client.state();
    IS_TRUE(state == MQTT_CONNECTION_TIMEOUT);

    IS_FALSE(shimClient.error());

    END_IT
}
开发者ID:1125384055，项目名称:libraries，代码行数:29，代码来源:keepalive_spec.cpp

示例5: test_connect_properly_formatted

int test_connect_properly_formatted() {
    IT("sends a properly formatted connect packet and succeeds");
    ShimClient shimClient;

    shimClient.setAllowConnect(true);
    byte expectServer[] = { 172, 16, 0, 2 };
    shimClient.expectConnect(expectServer,1883);
    byte connect[] = {0x10,0x18,0x0,0x4,0x4d,0x51,0x54,0x54,0x4,0x2,0x0,0xf,0x0,0xc,0x63,0x6c,0x69,0x65,0x6e,0x74,0x5f,0x74,0x65,0x73,0x74,0x31};
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };

    shimClient.expect(connect,26);
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int state = client.state();
    IS_TRUE(state == MQTT_DISCONNECTED);

    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);
    IS_FALSE(shimClient.error());

    state = client.state();
    IS_TRUE(state == MQTT_CONNECTED);

    END_IT
}
开发者ID:NikolasE，项目名称:pubsubclient，代码行数:26，代码来源:connect_spec.cpp

示例6: test_keepalive_no_pings_inbound_qos1

int test_keepalive_no_pings_inbound_qos1() {
    IT("does not send pings for connections with inbound qos1 (takes 1 minute)");

    ShimClient shimClient;
    shimClient.setAllowConnect(true);

    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);

    byte publish[] = {0x32,0x10,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,0x12,0x34,0x70,0x61,0x79,0x6c,0x6f,0x61,0x64};
    byte puback[] = {0x40,0x2,0x12,0x34};

    for (int i = 0; i < 50; i++) {
        shimClient.respond(publish,18);
        shimClient.expect(puback,4);
        sleep(1);
        rc = client.loop();
        IS_TRUE(rc);
        IS_FALSE(shimClient.error());
    }

    END_IT
}
开发者ID:1125384055，项目名称:libraries，代码行数:27，代码来源:keepalive_spec.cpp

示例7: test_receive_qos1

int test_receive_qos1() {
    IT("receives a qos1 message");
    reset_callback();
    
    ShimClient shimClient;
    shimClient.setAllowConnect(true);
    
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);
    
    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);
    
    byte publish[] = {0x32,0x10,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,0x12,0x34,0x70,0x61,0x79,0x6c,0x6f,0x61,0x64};
    shimClient.respond(publish,18);
    
    byte puback[] = {0x40,0x2,0x12,0x34};
    shimClient.expect(puback,4);
    
    rc = client.loop();
    
    IS_TRUE(rc);
    
    IS_TRUE(callback_called);
    IS_TRUE(strcmp(lastTopic,"topic")==0);
    IS_TRUE(memcmp(lastPayload,"payload",7)==0);
    IS_TRUE(lastLength == 7);
    
    IS_FALSE(shimClient.error());

    END_IT
}
开发者ID:4refr0nt，项目名称:ESPEasy-full-source，代码行数:33，代码来源:receive_spec.cpp

示例8: test_connect_disconnect_connect

int test_connect_disconnect_connect() {
    IT("connects, disconnects and connects again");
    ShimClient shimClient;

    shimClient.setAllowConnect(true);
    byte expectServer[] = { 172, 16, 0, 2 };
    shimClient.expectConnect(expectServer,1883);
    byte connect[] = {0x10,0x18,0x0,0x4,0x4d,0x51,0x54,0x54,0x4,0x2,0x0,0xf,0x0,0xc,0x63,0x6c,0x69,0x65,0x6e,0x74,0x5f,0x74,0x65,0x73,0x74,0x31};
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };

    shimClient.expect(connect,26);
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);

    int state = client.state();
    IS_TRUE(state == MQTT_DISCONNECTED);

    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);
    IS_FALSE(shimClient.error());

    state = client.state();
    IS_TRUE(state == MQTT_CONNECTED);

    byte disconnect[] = {0xE0,0x00};
    shimClient.expect(disconnect,2);

    client.disconnect();

    IS_FALSE(client.connected());
    IS_FALSE(shimClient.connected());
    IS_FALSE(shimClient.error());

    state = client.state();
    IS_TRUE(state == MQTT_DISCONNECTED);

    shimClient.expect(connect,28);
    shimClient.respond(connack,4);
    rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);
    IS_FALSE(shimClient.error());
    state = client.state();
    IS_TRUE(state == MQTT_CONNECTED);

    END_IT
}
开发者ID:NikolasE，项目名称:pubsubclient，代码行数:47，代码来源:connect_spec.cpp

示例9: test_connect_accepts_username_password

int test_connect_accepts_username_password() {
    IT("accepts a username and password");
    ShimClient shimClient;
    shimClient.setAllowConnect(true);
    
    byte connect[] = { 0x10,0x26,0x0,0x6,0x4d,0x51,0x49,0x73,0x64,0x70,0x3,0xc2,0x0,0xf,0x0,0xc,0x63,0x6c,0x69,0x65,0x6e,0x74,0x5f,0x74,0x65,0x73,0x74,0x31,0x0,0x4,0x75,0x73,0x65,0x72,0x0,0x4,0x70,0x61,0x73,0x73};
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.expect(connect,0x28);
    shimClient.respond(connack,4);
    
    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1",(char*)"user",(char*)"pass");
    IS_TRUE(rc);
    IS_FALSE(shimClient.error());

    END_IT
}
开发者ID:bugduino，项目名称:pubsubclient，代码行数:17，代码来源:connect_spec.cpp

示例10: test_connect_with_will_username_password

int test_connect_with_will_username_password() {
    IT("accepts a will, username and password");
    ShimClient shimClient;
    shimClient.setAllowConnect(true);
    
    byte connect[] = {0x10,0x42,0x0,0x6,0x4d,0x51,0x49,0x73,0x64,0x70,0x3,0xce,0x0,0xf,0x0,0xc,0x63,0x6c,0x69,0x65,0x6e,0x74,0x5f,0x74,0x65,0x73,0x74,0x31,0x0,0x9,0x77,0x69,0x6c,0x6c,0x54,0x6f,0x70,0x69,0x63,0x0,0xb,0x77,0x69,0x6c,0x6c,0x4d,0x65,0x73,0x73,0x61,0x67,0x65,0x0,0x4,0x75,0x73,0x65,0x72,0x0,0x8,0x70,0x61,0x73,0x73,0x77,0x6f,0x72,0x64};
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.expect(connect,0x44);
    shimClient.respond(connack,4);
    
    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1",(char*)"user",(char*)"password",(char*)"willTopic",1,0,(char*)"willMessage");
    IS_TRUE(rc);
    IS_FALSE(shimClient.error());

    END_IT
}
开发者ID:bugduino，项目名称:pubsubclient，代码行数:17，代码来源:connect_spec.cpp

示例11: test_connect_ignores_password_no_username

int test_connect_ignores_password_no_username() {
    IT("ignores a password but no username");
    ShimClient shimClient;
    shimClient.setAllowConnect(true);
    
    byte connect[] = {0x10,0x1a,0x0,0x6,0x4d,0x51,0x49,0x73,0x64,0x70,0x3,0x2,0x0,0xf,0x0,0xc,0x63,0x6c,0x69,0x65,0x6e,0x74,0x5f,0x74,0x65,0x73,0x74,0x31};
    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.expect(connect,28);
    shimClient.respond(connack,4);
    
    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1",'\0',(char*)"pass");
    IS_TRUE(rc);
    IS_FALSE(shimClient.error());

    END_IT
}
开发者ID:bugduino，项目名称:pubsubclient，代码行数:17，代码来源:connect_spec.cpp

示例12: test_publish

int test_publish() {
    IT("publishes a null-terminated string");
    ShimClient shimClient;
    shimClient.setAllowConnect(true);

    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);

    byte publish[] = {0x30,0xe,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,0x70,0x61,0x79,0x6c,0x6f,0x61,0x64};
    shimClient.expect(publish,16);

    rc = client.publish((char*)"topic",(char*)"payload");
    IS_TRUE(rc);

    IS_FALSE(shimClient.error());

    END_IT
}
开发者ID:schidler，项目名称:pubsubclient，代码行数:22，代码来源:publish_spec.cpp

示例13: test_unsubscribe

int test_unsubscribe() {
    IT("unsubscribes");
    ShimClient shimClient;
    shimClient.setAllowConnect(true);

    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);

    byte unsubscribe[] = { 0xA2,0x9,0x0,0x2,0x0,0x5,0x74,0x6f,0x70,0x69,0x63 };
    shimClient.expect(unsubscribe,12);
    byte unsuback[] = { 0xB0,0x2,0x0,0x2 };
    shimClient.respond(unsuback,4);

    rc = client.unsubscribe((char*)"topic");
    IS_TRUE(rc);

    IS_FALSE(shimClient.error());

    END_IT
}
开发者ID:schidler，项目名称:pubsubclient，代码行数:24，代码来源:subscribe_spec.cpp

示例14: test_subscribe_qos_1

int test_subscribe_qos_1() {
    IT("subscribes qos 1");
    ShimClient shimClient;
    shimClient.setAllowConnect(true);

    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
    shimClient.respond(connack,4);

    PubSubClient client(server, 1883, callback, shimClient);
    int rc = client.connect((char*)"client_test1");
    IS_TRUE(rc);

    byte subscribe[] = { 0x82,0xa,0x0,0x2,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,0x1 };
    shimClient.expect(subscribe,12);
    byte suback[] = { 0x90,0x3,0x0,0x2,0x1 };
    shimClient.respond(suback,5);

    rc = client.subscribe((char*)"topic",1);
    IS_TRUE(rc);

    IS_FALSE(shimClient.error());

    END_IT
}
开发者ID:schidler，项目名称:pubsubclient，代码行数:24，代码来源:subscribe_spec.cpp


注：本文中的ShimClient::expect方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。