C++ SdFat::mkdir方法代码示例

/**
 * Function starts the SD card service and makes sure that the appropriate directory
 * structure exists, then creates the file to use for logging data. Data will be logged
 * to a file called fileNamePrefix_0.csv or fileNamePrefix_0.bin (number will be incremented
 * for each new log file)
 *
 * @param chipSelectPin Arduino pin SD card reader CS pin is attached to
 * @param fileNamePrefix string to prefix at beginning of data file
 * @param csvData boolean flag whether we are writing csv data or binary data (used for filename)
 *
 * @return true if successful, false if failed
 */
bool beginDataLog(int chipSelectPin, const char *fileNamePrefix, bool csvData)
{
  bool ret;
  int i = 0;
  int max_len;
  char fileName[19];
  char prefix[8];
  char rootPath[] = "/data";


  if (_output_buffer != NULL) {
    delete []_output_buffer;
  }
  OUTPUT_BUF_SIZE = 512;
  _output_buffer = vol.cacheAddress()->output_buf;

  if (freeMemory() < 400) {
    strcpy_P(_getOutBuf(), sd_card_error);
    Serial.print(_getOutBuf());
    Serial.print(freeMemory());
    Serial.println(", need 400)");
    ret = false;
  } else {
    ret = sd.begin(chipSelectPin, SPI_FULL_SPEED);
  }

  //Filenames need to fit the 8.3 filename convention, so truncate down the
  //given filename if it is too long.
  memcpy(prefix, fileNamePrefix, 7);
  prefix[7] = '\0';

  if (ret) {
    if (!sd.exists(rootPath))
      ret = sd.mkdir(rootPath);
    if (ret) {
      while (true) {
	if (i < 10) {
	  max_len = 7;
	} else if (i < 100) {
	  max_len = 6;
	} else if (i < 1000) {
	  max_len = 5;
	} else {
	  break;
	}

	prefix[max_len - 1] = '\0';
	sprintf(fileName, "%s/%s%d.%s", rootPath, prefix, i,
		csvData ? "csv" : "bin");
	if (!sd.exists(fileName)) {
	  file = sd.open(fileName, FILE_WRITE);
	  break;
	}
	i++;
      }
    }
  }
  return file.isOpen();
}

  boolean put_handler(AtMegaWebServer& web_server) {
	const char* length_str = web_server.get_header_value("Content-Length");
	long length = atol(length_str);
	const char *path = web_server.get_path();

	SdFile file;
	if(!file.open(path, O_CREAT | O_WRITE | O_TRUNC)){
		 // maybe the folder must be created
		char *c = strrchr(path, '/');
		if(c){
			*c = 0;
			if(sdfat.mkdir(path)){
#if DEBUG
				Serial << "put_handler make DIR: ok " << path <<'\n';
#endif
				*c = '/';
				if(!file.open(path, O_CREAT | O_WRITE | O_TRUNC)){
#if DEBUG
					Serial << "put_handler open FILE: failed " << path <<'\n';
#endif
				}
			}
			*c = '/';
		}
	}
	if(file.isOpen()){

		EthernetClient client = web_server.get_client();
		long size = 0;
		int read = 0;
		while(size < length && web_server.waitClientAvailable()){
			read = client.read((uint8_t*)buffer, sizeof(buffer));
			file.write(buffer, read);
			size += read;
		}
		file.close();
#if DEBUG
		Serial << "file written: " << size << " of: " << length << '\n';
#endif
		if(size < length){
			web_server.sendHttpResult(404);
		}else{
			web_server.sendHttpResult(200);
			web_server << path;
		}

	}else{
		web_server.sendHttpResult(422); // assuming it's a bad filename (non 8.3 name)
#if DEBUG
		Serial << F("put_handler open file failed: send 422 ") << path <<'\n';
#endif
	}
	return true;
  }

//------------------------------------------------------------------------------
void setup() {
  Serial.begin(9600);
  
  // Wait for USB Serial 
  while (!Serial) {
    SysCall::yield();
  }
  delay(1000);

  cout << F("Type any character to start\n");
  // Wait for input line and discard.
  cin.readline();
  cout << endl;
  
  // Initialize the SD card at SPI_HALF_SPEED to avoid bus errors with
  // breadboards.  use SPI_FULL_SPEED for better performance.
  if (!sd.begin(SD_CHIP_SELECT, SPI_HALF_SPEED)) {
    sd.initErrorHalt();
  }
  if (sd.exists("Folder1") 
    || sd.exists("Folder1/file1.txt")
    || sd.exists("Folder1/File2.txt")) {
    error("Please remove existing Folder1, file1.txt, and File2.txt");
  }
  int rootFileCount = 0;
  sd.vwd()->rewind();   
  while (file.openNext(sd.vwd(), O_READ)) {
    if (!file.isHidden()) {
      rootFileCount++;
    }
    file.close();
    if (rootFileCount > 10) {
      error("Too many files in root. Please use an empty SD.");
    }
  }
  if (rootFileCount) {
    cout << F("\nPlease use an empty SD for best results.\n\n");
    delay(1000);    
  }
  // Create a new folder.
  if (!sd.mkdir("Folder1")) {
    error("Create Folder1 failed");
  }
  cout << F("Created Folder1\n");

  // Create a file in Folder1 using a path.
  if (!file.open("Folder1/file1.txt", O_CREAT | O_WRITE)) {
    error("create Folder1/file1.txt failed");
  }
  file.close();
  cout << F("Created Folder1/file1.txt\n");

  // Change volume working directory to Folder1.
  if (!sd.chdir("Folder1")) {
    error("chdir failed for Folder1.\n");
  }
  cout << F("chdir to Folder1\n");

  // Create File2.txt in current directory.
  if (!file.open("File2.txt", O_CREAT | O_WRITE)) {
    error("create File2.txt failed");
  }
  file.close();
  cout << F("Created File2.txt in current directory\n");

  cout << F("\nList of files on the SD.\n");
  sd.ls("/", LS_R);

  // Remove files from current directory.
  if (!sd.remove("file1.txt") || !sd.remove("File2.txt")) {
    error("remove failed");
  }
  cout << F("\nfile1.txt and File2.txt removed.\n");

  // Change current directory to root.
  if (!sd.chdir()) {
    error("chdir to root failed.\n");
  }

  cout << F("\nList of files on the SD.\n");
  sd.ls(LS_R);

  // Remove Folder1.
  if (!sd.rmdir("Folder1")) {
    error("rmdir for Folder1 failed\n");
  }

  cout << F("\nFolder1 removed.\n");
  cout << F("\nList of files on the SD.\n");
  sd.ls(LS_R);
  cout << F("Done!\n");
}