C++ QwtLinearScaleEngine::setAttributes方法代码示例

本文整理汇总了C++中QwtLinearScaleEngine::setAttributes方法的典型用法代码示例。如果您正苦于以下问题：C++ QwtLinearScaleEngine::setAttributes方法的具体用法？C++ QwtLinearScaleEngine::setAttributes怎么用？C++ QwtLinearScaleEngine::setAttributes使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类QwtLinearScaleEngine的用法示例。

在下文中一共展示了QwtLinearScaleEngine::setAttributes方法的5个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: interval

/*!
    Align and divide an interval

   \param maxNumSteps Max. number of steps
   \param x1 First limit of the interval (In/Out)
   \param x2 Second limit of the interval (In/Out)
   \param stepSize Step size (Out)

   \sa QwtScaleEngine::setAttribute()
*/
void QwtLog10ScaleEngine::autoScale(int maxNumSteps, 
    double &x1, double &x2, double &stepSize) const
{
    if ( x1 > x2 )
        qSwap(x1, x2);

    QwtDoubleInterval interval(x1 / pow(10.0, lowerMargin()), 
        x2 * pow(10.0, upperMargin()) );

    if (interval.maxValue() / interval.minValue() < 10.0)
    {
        // scale width is less than one decade -> build linear scale

        QwtLinearScaleEngine linearScaler;
        linearScaler.setAttributes(attributes());
        linearScaler.setReference(reference());
        linearScaler.setMargins(lowerMargin(), upperMargin());

        linearScaler.autoScale(maxNumSteps, x1, x2, stepSize);
        stepSize = ::log10(stepSize);

        return;
    }

    double logRef = 1.0;
    if (reference() > LOG_MIN / 2)
        logRef = qwtMin(reference(), LOG_MAX / 2);

    if (testAttribute(QwtScaleEngine::Symmetric))
    {
        const double delta = qwtMax(interval.maxValue() / logRef,  
            logRef / interval.minValue());
        interval.setInterval(logRef / delta, logRef * delta);
    }

    if (testAttribute(QwtScaleEngine::IncludeReference))
        interval = interval.extend(logRef);

    interval = interval.limited(LOG_MIN, LOG_MAX);

    if (interval.width() == 0.0)
        interval = buildInterval(interval.minValue());

    stepSize = divideInterval(log10(interval).width(), qwtMax(maxNumSteps, 1));
    if ( stepSize < 1.0 )
        stepSize = 1.0;

    if (!testAttribute(QwtScaleEngine::Floating))
        interval = align(interval, stepSize);

    x1 = interval.minValue();
    x2 = interval.maxValue();

    if (testAttribute(QwtScaleEngine::Inverted))
    {
        qSwap(x1, x2);
        stepSize = -stepSize;
    }
}

开发者ID:BackupTheBerlios，项目名称:qtiplot-svn，代码行数:69，代码来源:qwt_scale_engine.cpp

示例2: divideScale

/*!
   \brief Calculate a scale division for an interval

   \param x1 First interval limit
   \param x2 Second interval limit
   \param maxMajorSteps Maximum for the number of major steps
   \param maxMinorSteps Maximum number of minor steps
   \param stepSize Step size. If stepSize == 0, the engine
                   calculates one.

   \return Calculated scale division
*/
QwtScaleDiv QwtLogScaleEngine::divideScale( double x1, double x2,
    int maxMajorSteps, int maxMinorSteps, double stepSize ) const
{
    QwtInterval interval = QwtInterval( x1, x2 ).normalized();
    interval = interval.limited( LOG_MIN, LOG_MAX );

    if ( interval.width() <= 0 )
        return QwtScaleDiv();

    const double logBase = base();

    if ( interval.maxValue() / interval.minValue() < logBase )
    {
        // scale width is less than one decade -> build linear scale

        QwtLinearScaleEngine linearScaler;
        linearScaler.setAttributes( attributes() );
        linearScaler.setReference( reference() );
        linearScaler.setMargins( lowerMargin(), upperMargin() );

        if ( stepSize != 0.0 )
        {
            if ( stepSize < 0.0 )
                stepSize = -qPow( logBase, -stepSize );
            else
                stepSize = qPow( logBase, stepSize );
        }

        return linearScaler.divideScale( x1, x2,
            maxMajorSteps, maxMinorSteps, stepSize );
    }

    stepSize = qAbs( stepSize );
    if ( stepSize == 0.0 )
    {
        if ( maxMajorSteps < 1 )
            maxMajorSteps = 1;

        stepSize = divideInterval( 
            qwtLogInterval( logBase, interval ).width(), maxMajorSteps );
        if ( stepSize < 1.0 )
            stepSize = 1.0; // major step must be >= 1 decade
    }

    QwtScaleDiv scaleDiv;
    if ( stepSize != 0.0 )
    {
        QList<double> ticks[QwtScaleDiv::NTickTypes];
        buildTicks( interval, stepSize, maxMinorSteps, ticks );

        scaleDiv = QwtScaleDiv( interval, ticks );
    }

    if ( x1 > x2 )
        scaleDiv.invert();

    return scaleDiv;
}

开发者ID:iclosure，项目名称:jdataanalyse，代码行数:70，代码来源:qwt_scale_engine.cpp

示例3: divideScale

/*!
   \brief Calculate a scale division

   \param x1 First interval limit 
   \param x2 Second interval limit 
   \param maxMajSteps Maximum for the number of major steps
   \param maxMinSteps Maximum number of minor steps
   \param stepSize Step size. If stepSize == 0, the scaleEngine
                   calculates one.

   \sa QwtScaleEngine::stepSize, LogTimeScaleEngine::subDivide
*/
QwtScaleDiv LogTimeScaleEngine::divideScale(double x1, double x2,
    int maxMajSteps, int maxMinSteps, double stepSize) const
{
    QwtDoubleInterval interval = QwtDoubleInterval(x1, x2).normalized();
    interval = interval.limited(LOG_MIN, LOG_MAX);

    if (interval.width() <= 0 )
        return QwtScaleDiv();

    if (interval.maxValue() / interval.minValue() < 10.0)
    {
        // scale width is less than one decade -> build linear scale
    
        QwtLinearScaleEngine linearScaler;
        linearScaler.setAttributes(attributes());
        linearScaler.setReference(reference());
        linearScaler.setMargins(
                                #if (QWT_VERSION >= 0x050200)
				lowerMargin(), upperMargin()
				#else
				loMargin(), hiMargin()
				#endif
				);

        return linearScaler.divideScale(x1, x2, 
            maxMajSteps, maxMinSteps, stepSize);
    }

    stepSize = qwtAbs(stepSize);
    if ( stepSize == 0.0 )
    {
        if ( maxMajSteps < 1 )
            maxMajSteps = 1;

        stepSize = divideInterval(log10(interval).width(), maxMajSteps);
        if ( stepSize < 1.0 )
            stepSize = 1.0; // major step must be >= 1 decade
    }

    QwtScaleDiv scaleDiv;
    if ( stepSize != 0.0 )
    {
        QwtValueList ticks[QwtScaleDiv::NTickTypes];
        buildTicks(interval, stepSize, maxMinSteps, ticks);

        scaleDiv = QwtScaleDiv(interval, ticks);
    }

    if ( x1 > x2 )
        scaleDiv.invert();

    return scaleDiv;
}

开发者ID:bodylinksystems，项目名称:GoldenCheetah，代码行数:65，代码来源:LogTimeScaleEngine.cpp

示例4: QwtScaleDiv

/*!
   \brief Calculate a scale division

   \param x1 First interval limit
   \param x2 Second interval limit
   \param maxMajSteps Maximum for the number of major steps
   \param maxMinSteps Maximum number of minor steps
   \param stepSize Step size. If stepSize == 0, the scaleEngine
                   calculates one.
*/
QwtScaleDiv Log2ScaleEngine::divideScale(double x1, double x2,
    int maxMajSteps, int maxMinSteps, double stepSize) const
{
    QwtDoubleInterval interval = QwtDoubleInterval(x1, x2).normalized();
    interval = interval.limited(LOG_MIN, LOG_MAX);

    if (interval.width() <= 0 )
        return QwtScaleDiv();

    if (interval.maxValue() / interval.minValue() < 2){
        // scale width is less than 2 -> build linear scale
        QwtLinearScaleEngine linearScaler;
        linearScaler.setAttributes(attributes());
        linearScaler.setReference(reference());
        linearScaler.setMargins(lowerMargin(), upperMargin());

        return linearScaler.divideScale(x1, x2,
            maxMajSteps, maxMinSteps, stepSize);
    }

    stepSize = qwtAbs(stepSize);
    if ( stepSize == 0.0 ){
        if ( maxMajSteps < 1 )
            maxMajSteps = 1;

		stepSize = ceil(log2(interval).width()/double(maxMajSteps));
    }

    QwtScaleDiv scaleDiv;
    if ( stepSize != 0.0 ){
        QwtValueList ticks[QwtScaleDiv::NTickTypes];
		buildTicks(interval, stepSize, maxMinSteps, ticks);
        scaleDiv = QwtScaleDiv(interval, ticks);
    }

    if ( x1 > x2 )
        scaleDiv.invert();

    return scaleDiv;
}

开发者ID:BackupTheBerlios，项目名称:qtiplot-svn，代码行数:50，代码来源:Log2ScaleEngine.cpp

示例5: autoScale

/*!
    Align and divide an interval

   \param maxNumSteps Max. number of steps
   \param x1 First limit of the interval (In/Out)
   \param x2 Second limit of the interval (In/Out)
   \param stepSize Step size (Out)

   \sa QwtScaleEngine::setAttribute()
*/
void QwtLogScaleEngine::autoScale( int maxNumSteps,
    double &x1, double &x2, double &stepSize ) const
{
    if ( x1 > x2 )
        qSwap( x1, x2 );

    const double logBase = base();

    QwtInterval interval( x1 / qPow( logBase, lowerMargin() ),
        x2 * qPow( logBase, upperMargin() ) );

    if ( interval.maxValue() / interval.minValue() < logBase )
    {
        // scale width is less than one step -> try to build a linear scale

        QwtLinearScaleEngine linearScaler;
        linearScaler.setAttributes( attributes() );
        linearScaler.setReference( reference() );
        linearScaler.setMargins( lowerMargin(), upperMargin() );

        linearScaler.autoScale( maxNumSteps, x1, x2, stepSize );

        QwtInterval linearInterval = QwtInterval( x1, x2 ).normalized();
        linearInterval = linearInterval.limited( LOG_MIN, LOG_MAX );

        if ( linearInterval.maxValue() / linearInterval.minValue() < logBase )
        {
            // the aligned scale is still less than one step
            if ( stepSize < 0.0 )
                stepSize = -qwtLog( logBase, qAbs( stepSize ) );
            else
                stepSize = qwtLog( logBase, stepSize );

            return;
        }
    }

    double logRef = 1.0;
    if ( reference() > LOG_MIN / 2 )
        logRef = qMin( reference(), LOG_MAX / 2 );

    if ( testAttribute( QwtScaleEngine::Symmetric ) )
    {
        const double delta = qMax( interval.maxValue() / logRef,
            logRef / interval.minValue() );
        interval.setInterval( logRef / delta, logRef * delta );
    }

    if ( testAttribute( QwtScaleEngine::IncludeReference ) )
        interval = interval.extend( logRef );

    interval = interval.limited( LOG_MIN, LOG_MAX );

    if ( interval.width() == 0.0 )
        interval = buildInterval( interval.minValue() );

    stepSize = divideInterval( qwtLogInterval( logBase, interval ).width(), 
        qMax( maxNumSteps, 1 ) );
    if ( stepSize < 1.0 )
        stepSize = 1.0;

    if ( !testAttribute( QwtScaleEngine::Floating ) )
        interval = align( interval, stepSize );

    x1 = interval.minValue();
    x2 = interval.maxValue();

    if ( testAttribute( QwtScaleEngine::Inverted ) )
    {
        qSwap( x1, x2 );
        stepSize = -stepSize;
    }
}

开发者ID:iclosure，项目名称:jdataanalyse，代码行数:83，代码来源:qwt_scale_engine.cpp

注：本文中的QwtLinearScaleEngine::setAttributes方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。