C++ QTableView::setHorizontalScrollBarPolicy方法代码示例

void ReceiveCoinsDialog::setModel(WalletModel *_model)
{
    this->model = _model;

    if(_model && _model->getOptionsModel())
    {
        _model->getRecentRequestsTableModel()->sort(RecentRequestsTableModel::Date, Qt::DescendingOrder);
        connect(_model->getOptionsModel(), SIGNAL(displayUnitChanged(int)), this, SLOT(updateDisplayUnit()));
        updateDisplayUnit();

        QTableView* tableView = ui->recentRequestsView;

        tableView->verticalHeader()->hide();
        tableView->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
        tableView->setModel(_model->getRecentRequestsTableModel());
        tableView->setAlternatingRowColors(true);
        tableView->setSelectionBehavior(QAbstractItemView::SelectRows);
        tableView->setSelectionMode(QAbstractItemView::ContiguousSelection);
        tableView->setColumnWidth(RecentRequestsTableModel::Date, DATE_COLUMN_WIDTH);
        tableView->setColumnWidth(RecentRequestsTableModel::Label, LABEL_COLUMN_WIDTH);
        tableView->setColumnWidth(RecentRequestsTableModel::Amount, AMOUNT_MINIMUM_COLUMN_WIDTH);

        connect(tableView->selectionModel(),
            SIGNAL(selectionChanged(QItemSelection, QItemSelection)), this,
            SLOT(recentRequestsView_selectionChanged(QItemSelection, QItemSelection)));
        // Last 2 columns are set by the columnResizingFixer, when the table geometry is ready.
        columnResizingFixer = new GUIUtil::TableViewLastColumnResizingFixer(tableView, AMOUNT_MINIMUM_COLUMN_WIDTH, DATE_COLUMN_WIDTH, this);
    }

void ReceiveCoinsDialog::setModel(WalletModel *_model)
{
    this->model = _model;

    if(_model && _model->getOptionsModel())
    {
        _model->getRecentRequestsTableModel()->sort(RecentRequestsTableModel::Date, Qt::DescendingOrder);
        connect(_model->getOptionsModel(), SIGNAL(displayUnitChanged(int)), this, SLOT(updateDisplayUnit()));
        updateDisplayUnit();

        QTableView* tableView = ui->recentRequestsView;

        tableView->verticalHeader()->hide();
        tableView->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
        tableView->setModel(_model->getRecentRequestsTableModel());
        tableView->setAlternatingRowColors(true);
        tableView->setSelectionBehavior(QAbstractItemView::SelectRows);
        tableView->setSelectionMode(QAbstractItemView::ContiguousSelection);
        tableView->setColumnWidth(RecentRequestsTableModel::Date, DATE_COLUMN_WIDTH);
        tableView->setColumnWidth(RecentRequestsTableModel::Label, LABEL_COLUMN_WIDTH);
        tableView->setColumnWidth(RecentRequestsTableModel::Amount, AMOUNT_MINIMUM_COLUMN_WIDTH);

        connect(tableView->selectionModel(),
            SIGNAL(selectionChanged(QItemSelection, QItemSelection)), this,
            SLOT(recentRequestsView_selectionChanged(QItemSelection, QItemSelection)));
        // Last 2 columns are set by the columnResizingFixer, when the table geometry is ready.
        columnResizingFixer = new GUIUtil::TableViewLastColumnResizingFixer(tableView, AMOUNT_MINIMUM_COLUMN_WIDTH, DATE_COLUMN_WIDTH, this);

        if (model->wallet().getDefaultAddressType() == OutputType::BECH32) {
            ui->useBech32->setCheckState(Qt::Checked);
        } else {
            ui->useBech32->setCheckState(Qt::Unchecked);
        }

        // eventually disable the main receive button if private key operations are disabled
        ui->receiveButton->setEnabled(!model->privateKeysDisabled());
    }

void PrintLayout::printTable()
{
	struct dive *dive;
	int done = 0; // percents done
	int i, row = 0, progress, total = estimateTotalDives();
	if (!total)
		return;

	// create and setup a table
	QTableView table;
	table.setAttribute(Qt::WA_DontShowOnScreen);
	table.setSelectionMode(QAbstractItemView::NoSelection);
	table.setFocusPolicy(Qt::NoFocus);
	table.horizontalHeader()->setVisible(false);
	table.verticalHeader()->setVisible(false);
#if QT_VERSION < QT_VERSION_CHECK(5, 0, 0)
	table.horizontalHeader()->setResizeMode(QHeaderView::Fixed);
	table.verticalHeader()->setResizeMode(QHeaderView::ResizeToContents);
#else
	table.horizontalHeader()->setSectionResizeMode(QHeaderView::Fixed);
	table.verticalHeader()->setSectionResizeMode(QHeaderView::ResizeToContents);
#endif
	table.setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
	table.setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
	// fit table to one page initially
	table.resize(scaledPageW, scaledPageH);

	// don't show border
	table.setStyleSheet(
		"QTableView { border: none }");

	// create and fill a table model
	TablePrintModel model;
	addTablePrintHeadingRow(&model, row); // add one heading row
	row++;
	progress = 0;
	for_each_dive(i, dive) {
		if (!dive->selected && printOptions->print_selected)
			continue;
		addTablePrintDataRow(&model, row, dive);
		row++;
		progress++;
		emit signalProgress((progress * 10) / total);
	}
	done = 10;
	table.setModel(&model); // set model to table
	// resize columns to percentages from page width
	int accW = 0;
	int cols = model.columns;
	int tableW = table.width();
	for (i = 0; i < model.columns; i++) {
		int pw = qCeil((qreal)(tablePrintColumnWidths.at(i) * table.width()) / 100.0);
		accW += pw;
		if (i == cols - 1 && accW > tableW) /* adjust last column */
			pw -= accW - tableW;
		table.horizontalHeader()->resizeSection(i, pw);
	}
	// reset the model at this point
	model.callReset();

	// a list of vertical offsets where pages begin and some helpers
	QList<unsigned int> pageIndexes;
	pageIndexes.append(0);

	/* the algorithm bellow processes the table rows in multiple passes,
	 * compensating for loss of space due to moving rows on a new page instead
	 * of truncating them.
	 * there is a 'passes' array defining how much percents of the total
	 * progress each will take. given, the first and last stage of this function
	 * use 10% each, then the sum of passes[] here should be 80%.
	 * two should be enough! */
	const int passes[] = { 70, 10 };
	int tableHeight = 0, lastAccIndex = 0, rowH, accH, headings;
	bool isHeading = false;

	for (unsigned int pass = 0; pass < sizeof(passes) / sizeof(passes[0]); pass++) {
		progress = headings = accH = 0;
		total = model.rows - lastAccIndex;
		for (i = lastAccIndex; i < model.rows; i++) {
			rowH = table.rowHeight(i);
			accH += rowH;
			if (isHeading) {
				headings += rowH;
				isHeading = false;
			}
			if (accH > scaledPageH) {
				lastAccIndex = i;
				pageIndexes.append(pageIndexes.last() + (accH - rowH));
				addTablePrintHeadingRow(&model, i);
				isHeading = true;
				accH = 0;
				i--;
			}
			tableHeight += table.rowHeight(i);
			progress++;
			emit signalProgress(done + (progress * passes[pass]) / total);
		}
		done += passes[pass];
	}
	done = 90;
//.........这里部分代码省略.........

void PrintLayout::printTable()
{
	// create and setup a table
	QTableView table;
	table.setAttribute(Qt::WA_DontShowOnScreen);
	table.setSelectionMode(QAbstractItemView::NoSelection);
	table.setFocusPolicy(Qt::NoFocus);
	table.horizontalHeader()->setVisible(false);
	table.horizontalHeader()->setResizeMode(QHeaderView::Fixed);
	table.verticalHeader()->setVisible(false);
	table.verticalHeader()->setResizeMode(QHeaderView::ResizeToContents);
	table.setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
	table.setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
	// fit table to one page initially
	table.resize(scaledPageW,  scaledPageH);

	// create and fill a table model
	TablePrintModel model;
	struct dive *dive;
	int i, row = 0;
	addTablePrintHeadingRow(&model, row); // add one heading row
	row++;
	for_each_dive(i, dive) {
		if (!dive->selected && printOptions->print_selected)
			continue;
		addTablePrintDataRow(&model, row, dive);
		row++;
	}
	table.setModel(&model); // set model to table
	// resize columns to percentages from page width
	for (int i = 0; i < model.columns; i++) {
		int pw = qCeil((qreal)(tablePrintColumnWidths.at(i) * table.width()) / 100);
		table.horizontalHeader()->resizeSection(i, pw);
	}
	// reset the model at this point
	model.callReset();

	// a list of vertical offsets where pages begin and some helpers
	QList<unsigned int> pageIndexes;
	pageIndexes.append(0);
	int tableHeight = 0, rowH = 0, accH = 0;

	// process all rows
	for (int i = 0; i < model.rows; i++) {
		rowH = table.rowHeight(i);
		accH += rowH;
		if (accH > scaledPageH) { // push a new page index and add a heading
			pageIndexes.append(pageIndexes.last() + (accH - rowH));
			addTablePrintHeadingRow(&model, i);
			accH = 0;
			i--;
		}
		tableHeight += rowH;
	}
	pageIndexes.append(pageIndexes.last() + accH);
	// resize the whole widget so that it can be rendered
	table.resize(scaledPageW, tableHeight);

	// attach a painter and render pages by using pageIndexes
	QPainter painter(printer);
	painter.setRenderHint(QPainter::Antialiasing);
	painter.setRenderHint(QPainter::SmoothPixmapTransform);
	painter.scale(scaleX, scaleY);
	for (int i = 0; i < pageIndexes.size() - 1; i++) {
		if (i > 0)
			printer->newPage();
		QRegion region(0, pageIndexes.at(i) - 1,
		               table.width(),
		               pageIndexes.at(i + 1) - pageIndexes.at(i) + 2);
		table.render(&painter, QPoint(0, 0), region);
	}
}

/* we create a table that has a fixed height, but can stretch to fit certain width */
QTableView *PrintLayout::createProfileTable(ProfilePrintModel *model, const int tableW)
{
	// setup a new table
	QTableView *table = new QTableView();
	QHeaderView *vHeader = table->verticalHeader();
	QHeaderView *hHeader = table->horizontalHeader();
	table->setAttribute(Qt::WA_DontShowOnScreen);
	table->setSelectionMode(QAbstractItemView::NoSelection);
	table->setFocusPolicy(Qt::NoFocus);
	table->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
	table->setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
	hHeader->setVisible(false);
	vHeader->setVisible(false);
#if QT_VERSION < QT_VERSION_CHECK(5, 0, 0)
	hHeader->setResizeMode(QHeaderView::Fixed);
	vHeader->setResizeMode(QHeaderView::Fixed);
#else
	hHeader->setSectionResizeMode(QHeaderView::Fixed);
	vHeader->setSectionResizeMode(QHeaderView::Fixed);
#endif
	// set the model
	table->setModel(model);

	/* setup cell span for the table using QTableView::setSpan().
	 * changes made here reflect on ProfilePrintModel::data(). */
	const int cols = model->columnCount();
	const int rows = model->rowCount();
	// info on top
	table->setSpan(0, 0, 1, 4);
	table->setSpan(1, 0, 1, 4);
	// gas used
	table->setSpan(2, 0, 1, 2);
	table->setSpan(3, 0, 1, 2);
	// notes
	table->setSpan(6, 0, 1, 5);
	table->setSpan(7, 0, 5, 5);

	/* resize row heights to the 'profilePrintRowHeights' indexes.
	 * profilePrintTableMaxH will then hold the table height. */
	int i;
	profilePrintTableMaxH = 0;
	for (i = 0; i < rows; i++) {
		int h = profilePrintRowHeights.at(i);
		profilePrintTableMaxH += h;
		vHeader->resizeSection(i, h);
	}
	// resize columns. columns widths are percentages from the table width.
	int accW = 0;
	for (i = 0; i < cols; i++) {
		int pw = qCeil((qreal)(profilePrintColumnWidths.at(i) * tableW) / 100.0);
		accW += pw;
		if (i == cols - 1 && accW > tableW) /* adjust last column */
			pw -= accW - tableW;
		hHeader->resizeSection(i, pw);
	}
	// resize
	table->resize(tableW, profilePrintTableMaxH);
	// hide the grid and set a stylesheet
	table->setItemDelegate(new ProfilePrintDelegate(this));
	table->setShowGrid(false);
	table->setStyleSheet(
		"QTableView { border: none }"
		"QTableView::item { border: 0px; padding-left: 2px; padding-right: 2px; }");
	// return
	return table;
}