C++ QSerialPort::isOpen方法代码示例

本文整理汇总了C++中QSerialPort::isOpen方法的典型用法代码示例。如果您正苦于以下问题：C++ QSerialPort::isOpen方法的具体用法？C++ QSerialPort::isOpen怎么用？C++ QSerialPort::isOpen使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类QSerialPort的用法示例。

在下文中一共展示了QSerialPort::isOpen方法的7个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: rgbChange

void SerialCommunication::rgbChange(int r, int g, int b)
{
	data = "";
	data.append("0" + QString::number(r) + "," + QString::number(g) + "," + QString::number(b) + "\n");
    qDebug("Sending: " + data);
	if (serial.isOpen())
		serial.write(data);
}

开发者ID:daniel-Jones，项目名称:RGB-Arduino-controller，代码行数:8，代码来源:serialcommunication.cpp

示例2: SerialDisconnect

bool SerialCommunication::SerialDisconnect()
{ // serial disconnect
	if (serial.isOpen())
	{
		serial.close();
		return true;
	}
	return false;
}

开发者ID:daniel-Jones，项目名称:RGB-Arduino-controller，代码行数:9，代码来源:serialcommunication.cpp

示例3: SerialConnect

bool SerialCommunication::SerialConnect(QString PortName)
{ // serial connect
	if (!serial.isOpen())
	{
		serial.setPortName(PortName);
		serial.setBaudRate(QSerialPort::Baud9600);
		serial.setDataBits(QSerialPort::Data8);
		serial.setParity(QSerialPort::NoParity);
		serial.setStopBits(QSerialPort::OneStop);
		serial.setFlowControl(QSerialPort::NoFlowControl);
		serial.open(QIODevice::ReadWrite);
		serial.waitForBytesWritten(9000);
		if (serial.isWritable()) {
			return true;
		}
	}
	return false;
}

开发者ID:daniel-Jones，项目名称:RGB-Arduino-controller，代码行数:18，代码来源:serialcommunication.cpp

示例4: run

void MainWindow::run()
{
    QSerialPort availableport;
    while(true){
        availableport.setPortName("COM6");
        availableport.open(QIODevice::ReadOnly);
        availableport.setBaudRate(QSerialPort::Baud9600);
        availableport.setDataBits(QSerialPort::Data8);
        availableport.setParity(QSerialPort::NoParity);
        availableport.setStopBits(QSerialPort::OneStop);
        availableport.setFlowControl(QSerialPort::NoFlowControl);

        if(availableport.isOpen()){
            //DEBUG MODE ON

            bioGuised->show();
            delay(5000);
        }
        else{
            bioGuised->hide();
        }
    }
}

开发者ID:dustinltran，项目名称:Bio-guised，代码行数:23，代码来源:mainwindow.cpp

示例5: QObject

GPSModule::GPSModule(QObject *parent) : QObject(parent)
{
    QSerialPort* serial = new QSerialPort(this);
    serial->setPortName(QString("/dev/ttyUSB0"));
    serial->setBaudRate(QSerialPort::Baud9600);
    serial->setDataBits(QSerialPort::Data8);
    serial->setParity(QSerialPort::NoParity);
    serial->setStopBits(QSerialPort::OneStop);
    serial->open(QIODevice::ReadOnly);

    if(serial->isOpen())
    {
        QNmeaPositionInfoSource *source = new QNmeaPositionInfoSource(QNmeaPositionInfoSource::RealTimeMode);
        source->setDevice(serial);

        if(source){
            connect(source, SIGNAL(positionUpdated(QGeoPositionInfo)), this, SLOT(positionUpdate(QGeoPositionInfo)));
            source->setPreferredPositioningMethods(QGeoPositionInfoSource::AllPositioningMethods);
            source->setUpdateInterval(2000);
            source->startUpdates();
        }
    }
}

开发者ID:yusuferdogan，项目名称:SmartBus，代码行数:23，代码来源:gpsmodule.cpp

示例6: QMainWindow

MainWindow::MainWindow(QWidget *parent) :
    QMainWindow(parent),
    ui(new Ui::MainWindow)
{
    ui->setupUi(this);

    qRegisterMetaType<eegDataType::iterator>("eegDataType::iterator");


    /// server
    ui->serverPortSpinBox->setMaximum(65535);
    int hostCounter = 0;
    ui->serverAddressComboBox->addItem("local, 120");
    ui->serverAddressComboBox->setItemData(hostCounter++,
                                           QVariant("127.0.0.1:120"));

    ui->serverAddressComboBox->addItem("local, home");
    ui->serverAddressComboBox->setItemData(hostCounter++,
                                           QVariant("127.0.0.1:35577"));

    ui->serverAddressComboBox->addItem("Enceph");
    ui->serverAddressComboBox->setItemData(hostCounter++,
                                           QVariant("213.145.47.104:120"));

    ui->serverAddressComboBox->addItem("pew");
    ui->serverAddressComboBox->setItemData(hostCounter++,
                                           QVariant("192.168.0.104:120"));
    connect(ui->serverAddressComboBox, SIGNAL(highlighted(int)),
            this, SLOT(serverAddressSlot(int)));
    connect(ui->serverAddressComboBox, SIGNAL(currentIndexChanged(int)),
            this, SLOT(serverAddressSlot(int)));
#if MY_LINROWS
    ui->serverAddressComboBox->setCurrentText("pew");
#else
    ui->serverAddressComboBox->setCurrentText("Enceph");
#endif


//    ui->serverAddressComboBox->setCurrentText("pew"); /// fix via router, always 192.168.0.104


    /// com
    for(int i = 0; i < 9; ++i)
    {
        ui->comPortComboBox->addItem("COM"+QString::number(i+1));
    }
    ui->comPortComboBox->setCurrentText("COM5");

#if COM_IN_MAIN
    connect(ui->connectComPortPushButton, SIGNAL(clicked()),
            this, SLOT(comPortSlot()));

    comPort = new QSerialPort(this);
    connect(comPort, SIGNAL(error(QSerialPort::SerialPortError)),
            this, SLOT(serialPortErrorSlot(QSerialPort::SerialPortError)));
    connect(this->ui->comPortSendOnePushButton, SIGNAL(clicked()),
            this, SLOT(sendOne()));
    connect(this->ui->comPortSendTwoPushButton, SIGNAL(clicked()),
            this, SLOT(sendTwo()));
#endif



#if 0
    /// COM test
    QSerialPort * comPort;
    comPort = new QSerialPort(this);

    comPort->setPortName(ui->comPortComboBox->currentText());
    comPort->open(QIODevice::WriteOnly);

    if(comPort->isOpen())
    {
//        cout << comPort->errorString() << endl;
        cout << "serialPort opened: " + def::comPortName << endl;
        cout << "portName: " << comPort->portName().toStdString() << endl;
        cout << "dataBits: " << comPort->dataBits() << endl;
        cout << "baudRate: " << comPort->baudRate() << endl;
        cout << "dataTerminalReady: " << comPort->isDataTerminalReady() << endl;
        cout << "flowControl: " << comPort->flowControl() << endl;
        cout << "requestToSend: " << comPort->isRequestToSend() << endl;
        cout << "stopBits: " << comPort->stopBits() << endl << endl;
    }

    comPortDataStream.setDevice(comPort);
#endif



    /// socket
#if SOCKET_IN_MAIN
    socket = new QTcpSocket(this);
#endif

#if !DATA_READER
    socketDataStream.setDevice(socket);
    socketDataStream.setByteOrder(QDataStream::LittleEndian); // least significant bytes first
#endif

#if SOCKET_IN_MAIN
//.........这里部分代码省略.........

开发者ID:ArtfulVampire，项目名称:TcpClient，代码行数:101，代码来源:mainwindow.cpp

示例7: run

void SerialPortThread::run()
{
    bool __isStopped = true;
    m_serialPortMutex.lock();
    __isStopped = m_isStopped;
    m_serialPortMutex.unlock();

    qDebug("thread running");

    SerialPortSettings::Settings __mSettings;
    bool __isSettingsChanged = false;
    QByteArray __dataReceived;
    QByteArray __dataToSend;
//    unsigned char rx_buffer[256];
    QSerialPort serial;
    while(!__isStopped)
    {
        m_serialPortMutex.lock();
        if(m_isSettingsChanged){
            m_isSettingsChanged =false;
            __isSettingsChanged = true;
        }
        m_serialPortMutex.unlock();
        if(__isSettingsChanged){
            __isSettingsChanged =false;
            if(serial.isOpen()){
                serial.close();
            }

            m_serialPortMutex.lock();
            __mSettings = m_currentSettings;
            m_serialPortMutex.unlock();
            serial.setPortName(__mSettings.name);
            serial.setBaudRate(__mSettings.baudRate);
            serial.setDataBits(__mSettings.dataBits);
            serial.setParity(__mSettings.parity);
            serial.setStopBits(__mSettings.stopBits);
            serial.setFlowControl(__mSettings.flowControl);
            emit message(QString("settings changed !"));
        }//settings changed

        if(!serial.isOpen()){

            if(serial.open(QIODevice::ReadWrite)){
                emit message(QString("open successfully !"));
            }
            else{
                m_serialPortMutex.lock();
                m_isStopped = true;
                m_serialPortMutex.unlock();
                emit message(QString("open failed !"));
                break;
            }
        }//if not open , while loop break

        /*=== opened , processing data here ===*/
        m_serialPortMutex.lock();
        if(!m_dataToSend.isEmpty()){
            __dataToSend.append(m_dataToSend);
            m_dataToSend.clear();
        }
        m_serialPortMutex.unlock();

        if(! __dataToSend.isEmpty()){
            if(serial.write(__dataToSend) > 0){
                if (serial.waitForBytesWritten(100) == true) {
                    qDebug() <<"write successfully !";
                    __dataToSend.clear();
                }
                else
                    qDebug() <<"write time out !";
            }
        }

        if (serial.waitForReadyRead(100)) {
            __dataReceived = serial.readAll();
            while (serial.waitForReadyRead(10))
                __dataReceived += serial.readAll();
        }
        //unpack the data received
        if(__dataReceived.size() > 0){

            emit message(__dataReceived);

//            for(int i = 0; i < __dataReceived.size(); i ++){

//                if(FrameUnpack(__dataReceived.at(i),rx_buffer)){

//                    tHeader* pHeader = (tHeader*)rx_buffer;
//                    if( pHeader->cmd  == CMD_ID_SENSOR_INFO){

//                 //       Cmd_Data *pData = (Cmd_Data *)&rx_buffer[sizeof(tHeader)];//

//                    }
//                    else{

//                    }
//                }
//            }
        }//unpack code end
//.........这里部分代码省略.........

开发者ID:pkzju，项目名称:QSuperConsole0.1，代码行数:101，代码来源:serialportthread.cpp

注：本文中的QSerialPort::isOpen方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。