C++ Q3GridLayout::addMultiCellWidget方法代码示例

TunerView::TunerView( int viewID_, QWidget *parent )
 : ViewWidget( viewID_, parent)
{
  //setCaption("Chromatic Tuner");

  Q3GridLayout *layout = new Q3GridLayout(this, 9, 3, 2);
  layout->setResizeMode(QLayout::SetNoConstraint);

  // Tuner widget goes from (0, 0) to (0, 8);
  //tunerWidget = new TunerWidget(this);
  tunerWidget = new VibratoTunerWidget(this);
  layout->addMultiCellWidget(tunerWidget, 0, 0, 0, 8);

  // Slider goes from (2,0) to (2,9)

  //slider = new QwtSlider(this, "slider", Qt::Horizontal, QwtSlider::Bottom, QwtSlider::BgTrough);
#if QWT_VERSION == 0x050000
  slider = new QwtSlider(this, Qt::Horizontal, QwtSlider::Bottom, QwtSlider::BgTrough);
#else
  slider = new QwtSlider(this, Qt::Horizontal, QwtSlider::BottomScale, QwtSlider::BgTrough);
#endif
  slider->setRange(0, 2);
  slider->setReadOnly(false);
  layout->addMultiCellWidget(slider, 1, 1, 0, 8);
  QToolTip::add(slider, "Increase slider to smooth the pitch over a longer time period");

  ledBuffer = new QPixmap();
  leds.push_back(new LEDIndicator(ledBuffer, this, "A"));
  leds.push_back(new LEDIndicator(ledBuffer, this, "B"));
  leds.push_back(new LEDIndicator(ledBuffer, this, "C"));
  leds.push_back(new LEDIndicator(ledBuffer, this, "D"));
  leds.push_back(new LEDIndicator(ledBuffer, this, "E"));
  leds.push_back(new LEDIndicator(ledBuffer, this, "F"));
  leds.push_back(new LEDIndicator(ledBuffer, this, "G"));

  leds.push_back(new LEDIndicator(ledBuffer, this, "#"));


  // Add the leds for note names into the positions (1, 0) to (1, 6)
  for (int n = 0; n < 7; n++) {
    layout->addWidget(leds.at(n), 2, n);
  }

  // (1, 7) is blank
  
  // Add the flat led
  layout->addWidget(leds.at(7), 2, 8);

  layout->setRowStretch( 0, 4 );
  layout->setRowStretch( 1, 1 );
  layout->setRowStretch( 2, 0 ); 
    
  //connect(gdata->view, SIGNAL(onFastUpdate(double)), this, SLOT(update()));
  //connect(gdata, SIGNAL(onChunkUpdate()), tunerWidget, SLOT(doUpdate()));
  connect(gdata, SIGNAL(onChunkUpdate()), this, SLOT(doUpdate()));
  connect(tunerWidget, SIGNAL(ledSet(int, bool)), this, SLOT(setLed(int, bool)));
}

ThetaTab::ThetaTab (QWidget *parent)
  : QWidget(parent)
{
    QString s;

    Q3GridLayout *grid = new Q3GridLayout(this, 10, 6, 20, -1, "grid 1");

/*    grid->addMultiCellWidget(new QLabel("Tetrode / channel", this), 0, 0, 0, 4);
    StimChan = new QComboBox( FALSE, this, "Channel Combo Box" );
    StimChan->insertStringList(*(daq_io_widget->ChannelStrings));
    grid->addMultiCellWidget(StimChan, 0, 0, 3, 3);
    connect(StimChan, SIGNAL(activated(int)), this, SLOT(updateThetaData(void)));
    connect(daq_io_widget, SIGNAL(updateChanDisplay(int)), this, SLOT(changeStimChanDisplay(int))); */

    grid->addMultiCellWidget(new QLabel("Pulse Length (100 us units)", this), 1, 1, 0, 2);
    pulse_len = new QSpinBox (0, 10000, 1, this, "Pulse Length");
    pulse_len->setValue(DIO_RT_DEFAULT_PULSE_LEN);
    grid->addMultiCellWidget(pulse_len, 1, 1, 3, 3);
    connect(pulse_len, SIGNAL(valueChanged(int)), this, SLOT(updateThetaData(void)));

    grid->addMultiCellWidget(new QLabel("Velocity Threshold (pixels/sec)", this), 2, 2, 0, 2);
    vel_thresh = new QSpinBox (0, 1000, 1, this, "Velocity Threshold");
    vel_thresh->setValue(DIO_RT_DEFAULT_THETA_VEL);
    grid->addMultiCellWidget(vel_thresh, 2, 2, 3, 3);
    connect(vel_thresh, SIGNAL(valueChanged(int)), this, SLOT(updateThetaData(void)));

    grid->addMultiCellWidget(new QLabel("Filter Delay (msec)", this), 3, 3, 0, 2);
    filt_delay = new QSpinBox (0, 1000, 1, this, "Filter Delay");
    filt_delay->setValue(DIO_RT_DEFAULT_THETA_FILTER_DELAY);
    grid->addMultiCellWidget(filt_delay, 3, 3, 3, 3);
    connect(filt_delay, SIGNAL(valueChanged(int)), this, SLOT(updateThetaData(void)));

    grid->addMultiCellWidget(new QLabel("Desired phase of stimulation (deg)", this), 4, 4, 0, 2);
    theta_phase = new QSpinBox (0, 1000, 1, this, "Desired Phase");
    grid->addMultiCellWidget(theta_phase, 4, 4, 3, 3);
    connect(theta_phase, SIGNAL(valueChanged(int)), this, SLOT(updateThetaData(void)));

    triggeredStart = new QPushButton("Start", this, "start");
    triggeredStart->setToggleButton(TRUE);
    triggeredStart->setEnabled(FALSE);
    grid->addMultiCellWidget(triggeredStart, 9, 9, 1, 1);
    connect(triggeredStart, SIGNAL(toggled(bool)), this, 
	    SLOT(startThetaStim(bool)));

    triggeredStop = new QPushButton("Stop", this, "stop");
    triggeredStop->setToggleButton(TRUE);
    grid->addMultiCellWidget(triggeredStop, 9, 9, 4, 4); 
    connect(triggeredStop, SIGNAL(toggled(bool)), this, 
	    SLOT(stopThetaStim(bool)));
}

void QStringOption::initWidget()
{
	Q3GridLayout* qgl = new Q3GridLayout(this,2,2);
  QLabel* label = new QLabel(optionTitle(),this);
	mpOptionLineEdit = new QLineEdit(this);
  connect(mpOptionLineEdit,SIGNAL(textChanged(const QString&)),
          this,SLOT(slotTextChanged(const QString&)));
//create pixmap
  assignPixmap();
	qgl->addMultiCellWidget(pixmapWidget(),0,1,0,0);
	qgl->addWidget(label,0,1);
	qgl->addWidget(mpOptionLineEdit,1,1);
  qgl->setSpacing(5);
	qgl->setColStretch(1,1);
	qgl->activate();
}

void SaneIntOption::initWidget()
{
  Q3GridLayout* qgl = new Q3GridLayout(this,3,3);
	mpTitleLabel = new QLabel(optionTitle(),this);
	mpValueSpinBox = new QSpinBox(INT_MIN,INT_MAX,1,this);
  mpValueSpinBox->setFocusPolicy(Qt::StrongFocus);//should get focus after clicking
//create pixmap
  assignPixmap();
	qgl->addMultiCellWidget(pixmapWidget(),0,2,0,0);

	qgl->addWidget(mpTitleLabel,1,1);
	qgl->addWidget(mpValueSpinBox,1,2);
  qgl->setSpacing(5);
  qgl->setColStretch(1,1);
	connect(mpValueSpinBox,SIGNAL(valueChanged(int)),this,SLOT(slotValueChanged(int)));
  qgl->activate();
}

//.........这里部分代码省略.........
    nicBillIDLabel->setAlignment(AlignRight|AlignVCenter);
    nicBillID = new QLineEdit(this, "nicBillID");
    nicBillID->setMaxLength(16);


    domainDone = new QCheckBox("Domain released", this, "domainDone");
    doneDate = new QLabel(this, "domainDate");
    doneDate->setAlignment(AlignRight|AlignVCenter);

    // Finally, our buttons.
    QPushButton *updateButton = new QPushButton("&Update", this, "updateButton");
    connect(updateButton, SIGNAL(clicked()), this, SLOT(updateClicked()));

    QPushButton *saveButton = new QPushButton("&Save", this, "saveButton");
    connect(saveButton, SIGNAL(clicked()), this, SLOT(saveClicked()));

    QPushButton *cancelButton = new QPushButton("&Cancel", this, "cancelButton");
    connect(cancelButton, SIGNAL(clicked()), this, SLOT(cancelClicked()));

    // And now for the layout.
    Q3BoxLayout *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 5);

    // Our info grid.
    Q3GridLayout *igrid = new Q3GridLayout(3, 4, 3);
    int curRow = 0;
    igrid->addWidget(customerIDLabel,   curRow, 0);
    igrid->addWidget(customerID,        curRow, 1);
    igrid->addWidget(loginIDLabel,      curRow, 2);
    igrid->addWidget(loginID,           curRow, 3);
    igrid->setRowStretch(curRow, 0);

    curRow++;
    igrid->addWidget(customerNameLabel,     curRow, 0);
    igrid->addMultiCellWidget(customerName, curRow, curRow, 1, 3);
    igrid->setRowStretch(curRow, 0);

    curRow++;
    igrid->addWidget(domainNameLabel,       curRow, 0);
    igrid->addMultiCellWidget(domainName,   curRow, curRow, 1, 3);
    igrid->setRowStretch(curRow, 0);

    igrid->setColStretch(0, 0);
    igrid->setColStretch(1, 1);
    igrid->setColStretch(2, 0);
    igrid->setColStretch(3, 0);

    ml->addLayout(igrid, 0);
    ml->addWidget(new HorizLine(this), 0);

    Q3GridLayout *gl = new Q3GridLayout(12, 3, 3);

    curRow = 0;
    gl->addMultiCellWidget(hostmasterSubmit,    curRow, curRow, 0, 1);
    gl->addWidget(hostmastDate,                 curRow, 2);
    gl->setRowStretch(curRow, 0);

    curRow++;
    gl->addMultiCellWidget(internicSubmit,      curRow, curRow, 0, 1);
    gl->addWidget(nicReqDate,                   curRow, 2);
    gl->setRowStretch(curRow, 0);

    curRow++;
    gl->addMultiCellWidget(dnsDone,             curRow, curRow, 0, 1);
    gl->addWidget(dnsDate,                      curRow, 2);
    gl->setRowStretch(curRow, 0);

LogVoiceMail::LogVoiceMail
(
	QWidget* parent,
	const char* name
) : TAAWidget(parent)
{
    setCaption( "Voice Mail Logging" );

    // Create the widgets
    QLabel *dateLabel = new QLabel(this);
    dateLabel->setAlignment(Qt::AlignRight|Qt::AlignVCenter);
    dateLabel->setText("D&ate/Time:");

    msgDateTime = new Q3DateTimeEdit(QDateTime::currentDateTime(), this, "MsgDateTime");
    dateLabel->setBuddy(msgDateTime);
    
    QLabel *messageLabel = new QLabel(this);
    messageLabel->setAlignment(Qt::AlignRight|Qt::AlignTop);
    messageLabel->setText("M&essage:");

    message = new Q3MultiLineEdit(this);
    message->setWordWrap(Q3MultiLineEdit::WidgetWidth);
    messageLabel->setBuddy(message);

    saveButton = new QPushButton(this);
    saveButton->setText("&Save");
    connect(saveButton, SIGNAL(clicked()), this, SLOT(saveMessage()));

    closeButton = new QPushButton(this);
    closeButton->setText("&Close");
    connect(closeButton, SIGNAL(clicked()), this, SLOT(closeClicked()));

    statusLabel = new QLabel(this);
    statusLabel->setAlignment(Qt::AlignLeft|Qt::AlignVCenter);
    statusLabel->setFrameStyle(Q3Frame::Panel|Q3Frame::Sunken);
    statusLabel->setMinimumSize(0, 20);

    // Now, create our layouts
    // Date/time area.
    Q3GridLayout *dtl = new Q3GridLayout(2, 4, 3);
    dtl->setColStretch(0, 0);
    dtl->setColStretch(1, 1);
    dtl->setColStretch(2, 0);
    dtl->setColStretch(3, 1);
    dtl->setRowStretch(0, 0);
    dtl->setRowStretch(1, 1);

    dtl->addWidget(dateLabel,               0, 0);
    dtl->addMultiCellWidget(msgDateTime,    0, 0, 1, 3);
    dtl->addWidget(messageLabel,            1, 0);
    dtl->addMultiCellWidget(message,        1, 1, 1, 3);

    // The action button layout.
    Q3BoxLayout *abl = new Q3BoxLayout(Q3BoxLayout::LeftToRight, 5);
    abl->addStretch(1);
    abl->addWidget(saveButton, 0);
    abl->addWidget(closeButton, 0);
    abl->addSpacing(5);

    // The main layout.
    Q3BoxLayout *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 0, 0);
    ml->addSpacing(3);
    ml->addLayout(dtl, 1);
    ml->addSpacing(3);
    ml->addLayout(abl, 0);
    ml->addSpacing(3);
    ml->addWidget(statusLabel, 0);

    // Done.

    msgDateTime->setFocus();

    resize(350, 180);
}

LogCall::LogCall
(
	QWidget* parent,
	const char* name
) : TAAWidget(parent)
{

    setCaption("Call Logger");

    // Create all of our widgets.
    loginID = new QLineEdit(this, "loginID");
    loginID->setMaxLength(16);
    connect(loginID, SIGNAL(textChanged(const QString &)), this, SLOT(loginIDChanged(const QString &)));
    loginIDLabel = new QLabel(loginID, "&Login ID", this);
    loginIDLabel->setAlignment(AlignRight|AlignVCenter);

    searchButton = new QPushButton(this, "searchButton");
    searchButton->setText("&Search");
    connect(searchButton, SIGNAL(clicked()), this, SLOT(findLogin()));
    
    // Searching doesn't really work very well, so lets hide the button for
    // now.
    searchButton->hide();

    callType = new QComboBox(false, this, "callType");
    callType->insertItem("Support");
    callType->insertItem("Sales");
    callType->insertItem("New User");
    callType->insertItem("Accounting");
    connect(callType, SIGNAL(highlighted(int)), this, SLOT(callTypeChanged(int)));
    typeLabel = new QLabel(callType, "&Type", this);
    typeLabel->setAlignment(AlignRight|AlignVCenter);

    reasonList = new Q3ListView(this, "reasonList");
    reasonList->addColumn("Call Subject");
    reasonList->setMaximumHeight(125);
    reasonLabel = new QLabel(reasonList, "&Reason", this);
    reasonLabel->setAlignment(AlignRight|AlignTop);
    
    solutionNotes = new Q3MultiLineEdit(this, "solutionNotes");
    solutionNotes->setWordWrap(Q3MultiLineEdit::WidgetWidth);
    solutionLabel = new QLabel(solutionNotes, "S&olution", this);
    solutionLabel->setAlignment(AlignRight|AlignTop);
    
    // Now, our buttons.
    custWinButton = new QPushButton(this, "custWinButton");
    custWinButton->setText("&Customer Window");
    connect(custWinButton, SIGNAL(clicked()), this, SLOT(loadCustomer()));
    
    clockButton = new QPushButton(this, "clockButton");
    clockButton->setText("Sto&p Timer");
    connect(clockButton, SIGNAL(clicked()), this, SLOT(toggleTimer()));

    doneButton = new QPushButton(this, "doneButton");
    doneButton->setText("&Done");
    connect(doneButton, SIGNAL(clicked()), this, SLOT(hangupCall()));

    statusLabel = new QLabel(this, "statusLabel");
    statusLabel->setFrameStyle(Q3Frame::Sunken|Q3Frame::WinPanel);

    clockArea = new QLCDNumber(this, "clockArea");
    clockArea->setMode(QLCDNumber::DEC);
    clockArea->setSegmentStyle(QLCDNumber::Flat);
    clockArea->setNumDigits(7);

    
    // Main Layout, top to bottom, with a grid and stuff thrown in.
    Q3BoxLayout  *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 3, 3);

    Q3GridLayout *gl = new Q3GridLayout(3, 5);
    gl->setRowStretch(0, 0);
    gl->setRowStretch(1, 0);
    gl->setRowStretch(2, 1);
    gl->setColStretch(0, 0);
    gl->setColStretch(1, 1);
    gl->setColStretch(2, 0);
    gl->setColStretch(3, 0);
    gl->setColStretch(4, 0);

    gl->addWidget(loginIDLabel,             0, 0);
    gl->addWidget(loginID,                  0, 1);
    gl->addWidget(searchButton,             0, 2);
    gl->addWidget(typeLabel,                0, 3);
    gl->addWidget(callType,                 0, 4);

    gl->addWidget(reasonLabel,              1, 0);
    gl->addMultiCellWidget(reasonList,      1, 1, 1, 4);
    
    gl->addWidget(solutionLabel,            2, 0);
    gl->addMultiCellWidget(solutionNotes,   2, 2, 1, 4);

    ml->addLayout(gl, 1);

    Q3BoxLayout  *abl = new Q3BoxLayout(Q3BoxLayout::LeftToRight, 0);
    abl->addWidget(custWinButton,  1);
    abl->addWidget(clockButton,  1);
    abl->addWidget(doneButton,  1);

    // These options don't really work very well, so lets disable them for
    // now.
//.........这里部分代码省略.........