C++ Q3BoxLayout::addLayout方法代码示例

void QtDatasetViewWidget::create(void)
{
	tablewidget = new QTableWidget(this);
    tablewidget->setColumnCount(3);	
	QStringList headerlist;
	headerlist << ""<<"Name" << "MSR";
	tablewidget->setHorizontalHeaderLabels(headerlist);
	tablewidget->verticalHeader()->hide();
	tablewidget->hideColumn(2);
	tablewidget->setAlternatingRowColors(true);

	connect(tablewidget,SIGNAL(itemDoubleClicked(QTableWidgetItem*)),
		     this,SLOT(itemDoublClicked_event(QTableWidgetItem*)));

	Q3ButtonGroup* opensave_grp = new Q3ButtonGroup( 1, Qt::Horizontal, "File:", this );
    opensave_grp->setExclusive( FALSE );
	opensave_grp->setAlignment(Qt::AlignLeft);
	//opensave_grp->setSizePolicy(QSizePolicy(QSizePolicy::Maximum, QSizePolicy::Maximum, false));

		QPushButton* openbtn = new QPushButton(QIcon(QPixmap("icons/fileopen.xpm")), "Open", opensave_grp, "open");
		connect( openbtn, SIGNAL( clicked () ), this, SLOT( open() ) );
		//open->setSizePolicy(QSizePolicy(QSizePolicy::Maximum, QSizePolicy::Maximum, false));
		
		//QPushButton* savebtn = new QPushButton(QIcon(QPixmap("icons/filesave.xpm")), "Save", opensave_grp, "save");
//		connect( save, SIGNAL( clicked () ), this, SLOT( save_event() ) );
		//save->setSizePolicy(QSizePolicy(QSizePolicy::Maximum, QSizePolicy::Maximum, false));
	
	Q3ButtonGroup *act_grp = new Q3ButtonGroup( 1, Qt::Horizontal, "Actions:", this );

		QPushButton* genthumbs_but = new QPushButton("Compute Projections", act_grp);
		connect(genthumbs_but, SIGNAL( clicked () ), this, SLOT( generatethumbs_event() ) );

		QPushButton* openmovie_but = new QPushButton("Open Movie Player", act_grp);
		connect(openmovie_but, SIGNAL( clicked () ), this, SLOT( openmovieplayer_event() ) );

	Q3ButtonGroup *align_grp = new Q3ButtonGroup( 1, Qt::Horizontal, "Alignment:", this );

		QPushButton* align_but = new QPushButton("Align Data", align_grp);
		connect(align_but, SIGNAL( clicked () ), this, SLOT( align_event() ) );

		QPushButton* stacks_but = new QPushButton("Compute Stacks", align_grp);
		connect(stacks_but, SIGNAL( clicked () ), this, SLOT( computestacks_event() ) );

	Q3BoxLayout * left_blayout = new Q3BoxLayout ( 0, Q3BoxLayout::TopToBottom, 0, 5, "left_blayout");
	left_blayout->setAlignment(Qt::AlignTop);
    left_blayout->addWidget( opensave_grp, 0, Qt::AlignTop);
    left_blayout->addWidget( act_grp, 0, Qt::AlignTop);
	align_grp->hide();
    //left_blayout->addWidget( align_grp, 0, Qt::AlignTop);
	

	Q3BoxLayout * rigth_blayout = new Q3BoxLayout ( 0, Q3BoxLayout::TopToBottom, 0, 5, "rigth_blayout");
    rigth_blayout->addWidget( tablewidget, 10);
	
	//our transfertab top level layout
	Q3BoxLayout * topmost = new Q3BoxLayout ( this, Q3BoxLayout::LeftToRight, 10, 5, "topmost_blayout");
    topmost->addLayout( left_blayout, 1);
    topmost->addLayout( rigth_blayout, 10);
}

RateCenterManager::RateCenterManager
(
	QWidget* parent,
	const char* name
) : TAAWidget(parent)
{
    setCaption( "Rate Center Manager" );

    rcList = new Q3ListView(this, "Rate Center Manager");
    rcList->setAllColumnsShowFocus(true);
    rcList->setRootIsDecorated(true);
    rcList->addColumn("Country/State/City");
    rcList->addColumn("Active");
    rcList->addColumn("Avail");
    rcList->addColumn("Total");
    connect(rcList, SIGNAL(doubleClicked(Q3ListViewItem *)), this, SLOT(itemDoubleClicked(Q3ListViewItem *)));

    activeColumn    = 1;
    availColumn     = 2;
    totalColumn     = 3;
    idColumn        = 4;

    rcList->setColumnAlignment(activeColumn, Qt::AlignRight);
    rcList->setColumnAlignment(availColumn,  Qt::AlignRight);
    rcList->setColumnAlignment(totalColumn,  Qt::AlignRight);


    addButton = new QPushButton(this, "Add Button");
    addButton->setText("&Add");
    connect(addButton, SIGNAL(clicked()), this, SLOT(addClicked()));

    editButton = new QPushButton(this, "Edit Button");
    editButton->setText("&Edit");
    connect(editButton, SIGNAL(clicked()), this, SLOT(editClicked()));

    deleteButton = new QPushButton(this, "Delete Button");
    deleteButton->setText("&Delete");
    connect(deleteButton, SIGNAL(clicked()), this, SLOT(deleteClicked()));
    deleteButton->setEnabled(false);

    closeButton = new QPushButton(this, "Close Button");
    closeButton->setText("&Close");
    connect(closeButton, SIGNAL(clicked()), this, SLOT(closeClicked()));

    Q3BoxLayout  *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 3, 3);
    ml->addWidget(rcList, 1);

    
    Q3BoxLayout  *bl = new Q3BoxLayout(Q3BoxLayout::LeftToRight, 1);
    bl->addStretch(1);
    bl->addWidget(addButton, 0);
    bl->addWidget(editButton, 0);
    bl->addWidget(deleteButton, 0);
    bl->addWidget(closeButton, 0);

    ml->addLayout(bl, 0);

    refreshRateCenters();
}

TE_Main::TE_Main(QWidget* parent, const char* name) :
	TAAWidget(parent)
{
	setCaption( "Targeted Email" );

    // Create our widgets.
    theTabBar = new QTabBar(this);

    // Create the tabs for the tab bar.
    theTabBar->addTab("Message");
    theTabBar->addTab("Login Types");
    theTabBar->addTab("Cities");

    qws = new Q3WidgetStack(this, "widgetStack");
    
    // Create the actual tabs now, using the widget stack as the parent.
    tmessage = new TE_Message(qws);
    qws->addWidget(tmessage, 0);
    
    tlogins = new TE_LoginTypes(qws);
    qws->addWidget(tlogins, 1);
    
    tcities = new TE_Cities(qws);
    qws->addWidget(tcities, 2);

    // Buttons now.
    QPushButton *sendButton = new QPushButton(this, "sendButton");
    sendButton->setText("&Send");
    connect(sendButton, SIGNAL(clicked()), this, SLOT(sendMessage()));

    QPushButton *cancelButton = new QPushButton(this, "cancelButton");
    cancelButton->setText("&Cancel");
    connect(cancelButton, SIGNAL(clicked()), this, SLOT(cancelClicked()));

    // Create our layout.
    Q3BoxLayout *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 3);
    ml->addWidget(theTabBar, 0);
    ml->addWidget(qws, 1);

    Q3BoxLayout *bl = new Q3BoxLayout(Q3BoxLayout::LeftToRight, 3);
    bl->addStretch(1);
    bl->addWidget(sendButton, 0);
    bl->addWidget(cancelButton, 0);

    ml->addLayout(bl, 0);
    
    connect(theTabBar, SIGNAL(selected(int)), qws, SLOT(raiseWidget(int)));

    // Create our Ctrl-1 through Ctrl-3 hotkeys
    Q3Accel  *ac = new Q3Accel(this);
    ac->insertItem(Qt::CTRL+Qt::Key_1, 0);
    ac->insertItem(Qt::CTRL+Qt::Key_2, 1);
    ac->insertItem(Qt::CTRL+Qt::Key_3, 2);
    connect(ac, SIGNAL(activated(int)), this, SLOT(raiseTab(int)));
}

BillingCycles::BillingCycles
(
	QWidget* parent,
	const char* name
) : TAAWidget(parent)
{
    // Create our widgets.
    list = new Q3ListView(this, "Cycle List");
    list->addColumn("Cycle ID");
    list->addColumn("Type");
    list->addColumn("Description");
    list->setAllColumnsShowFocus(true);

    // Create our buttons.
    QPushButton *newButton = new QPushButton(this, "New");
    newButton->setText("&New");
    connect(newButton, SIGNAL(clicked()), this, SLOT(newCycle()));

    QPushButton *editButton = new QPushButton(this, "Edit");
    editButton->setText("&Edit");
    connect(editButton, SIGNAL(clicked()), this, SLOT(editCycle()));

    QPushButton *deleteButton = new QPushButton(this, "Delete");
    deleteButton->setText("&Delete");
    connect(deleteButton, SIGNAL(clicked()), this, SLOT(deleteCycle()));

    QPushButton *closeButton = new QPushButton(this, "Close");
    closeButton->setText("&Close");
    connect(closeButton, SIGNAL(clicked()), this, SLOT(closeClicked()));

    // Our layout.  Very simple.
    Q3BoxLayout *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 3, 3);
    ml->addWidget(list, 1);

    // Buttons.
    Q3BoxLayout *bl = new Q3BoxLayout(Q3BoxLayout::LeftToRight, 1);
    bl->addStretch(1);
    bl->addWidget(newButton, 0);
    bl->addWidget(editButton, 0);
    bl->addWidget(deleteButton, 0);
    bl->addWidget(closeButton, 0);

    ml->addLayout(bl, 0);


    // Create our layout.


	setCaption( "Billing Cycles" );

}

SelectionList::SelectionList
(
	QWidget* parent,
	const char* name
) : QDialog ( parent, name )
{
	setCaption( "Select an Item" );

    titleLabel = new QLabel(this, "Title Label");
    titleLabel->setText("Please select an option.");
    titleLabel->setAlignment(Qt::AlignTop|Qt::AlignHCenter);

    list = new Q3ListView(this, "Selection List");
    list->setAllColumnsShowFocus(true);

    extraLabel = new QLabel(this, "Extra Label");
    extraLabel->setText("");
    extraLabel->setAlignment(Qt::AlignRight|Qt::AlignVCenter);

    extraList = new QComboBox(false, this, "Extra List");

    acceptButton = new QPushButton(this, "Accept Button");
    acceptButton->setText("&Accept");
    connect(acceptButton, SIGNAL(clicked()), SLOT(accept()));
    
    cancelButton = new QPushButton(this, "Cancel Button");
    cancelButton->setText("&Cancel");
    connect(cancelButton, SIGNAL(clicked()), SLOT(reject()));


    // Create the layout for this box.  _Very_ simple.  Top down box
    // with a button box at the bottom.
    
    Q3BoxLayout  *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 3, 3);
    ml->addWidget(titleLabel, 0);
    ml->addWidget(list, 1);
    
    Q3BoxLayout *bl = new Q3BoxLayout(Q3BoxLayout::LeftToRight, 3);
    bl->addWidget(extraLabel, 0);
    bl->addWidget(extraList, 1);
    bl->addSpacing(10);
    bl->addWidget(acceptButton, 0);
    bl->addWidget(cancelButton, 0);

    ml->addLayout(bl, 0);

    extraLabel->hide();
    extraList->hide();
	
}

//.........这里部分代码省略.........
    QPushButton *saveButton = new QPushButton("&Save", this, "saveButton");
    connect(saveButton, SIGNAL(clicked()), this, SLOT(saveClicked()));

    QPushButton *cancelButton = new QPushButton("&Cancel", this, "cancelButton");
    connect(cancelButton, SIGNAL(clicked()), this, SLOT(cancelClicked()));

    // And now for the layout.
    Q3BoxLayout *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 5);

    // Our info grid.
    Q3GridLayout *igrid = new Q3GridLayout(3, 4, 3);
    int curRow = 0;
    igrid->addWidget(customerIDLabel,   curRow, 0);
    igrid->addWidget(customerID,        curRow, 1);
    igrid->addWidget(loginIDLabel,      curRow, 2);
    igrid->addWidget(loginID,           curRow, 3);
    igrid->setRowStretch(curRow, 0);

    curRow++;
    igrid->addWidget(customerNameLabel,     curRow, 0);
    igrid->addMultiCellWidget(customerName, curRow, curRow, 1, 3);
    igrid->setRowStretch(curRow, 0);

    curRow++;
    igrid->addWidget(domainNameLabel,       curRow, 0);
    igrid->addMultiCellWidget(domainName,   curRow, curRow, 1, 3);
    igrid->setRowStretch(curRow, 0);

    igrid->setColStretch(0, 0);
    igrid->setColStretch(1, 1);
    igrid->setColStretch(2, 0);
    igrid->setColStretch(3, 0);

    ml->addLayout(igrid, 0);
    ml->addWidget(new HorizLine(this), 0);

    Q3GridLayout *gl = new Q3GridLayout(12, 3, 3);

    curRow = 0;
    gl->addMultiCellWidget(hostmasterSubmit,    curRow, curRow, 0, 1);
    gl->addWidget(hostmastDate,                 curRow, 2);
    gl->setRowStretch(curRow, 0);

    curRow++;
    gl->addMultiCellWidget(internicSubmit,      curRow, curRow, 0, 1);
    gl->addWidget(nicReqDate,                   curRow, 2);
    gl->setRowStretch(curRow, 0);

    curRow++;
    gl->addMultiCellWidget(dnsDone,             curRow, curRow, 0, 1);
    gl->addWidget(dnsDate,                      curRow, 2);
    gl->setRowStretch(curRow, 0);

    curRow++;
    gl->addMultiCellWidget(mailDone,            curRow, curRow, 0, 1);
    gl->addWidget(mailDate,                     curRow, 2);
    gl->setRowStretch(curRow, 0);

    curRow++;
    gl->addMultiCellWidget(vserverDone,         curRow, curRow, 0, 1);
    gl->addWidget(vserverDate,                  curRow, 2);
    gl->setRowStretch(curRow, 0);

    curRow++;
    gl->addWidget(serverListLabel,              curRow, 0);
    gl->addMultiCellWidget(serverList,          curRow, curRow, 1, 2);

ChangeBillingCycle::ChangeBillingCycle(QWidget* parent, const char* name, long CustID) :
	TAAWidget(parent)
{
	setCaption( "Edit Customer Billing Cycle" );

	if (!CustID) return;
	myCustID    = CustID;

    // Create the widgets
    QLabel *customerLabel = new QLabel("Customer:", this, "customerLabel");
    customerLabel->setAlignment(AlignRight|AlignVCenter);

    customer = new QLabel(this, "customer");
    customer->setAlignment(AlignLeft|AlignVCenter);

    QLabel *cycleListLabel = new QLabel("New Billing Cycle:", this, "cycleListLabel");
    cycleListLabel->setAlignment(AlignRight|AlignVCenter);

    cycleList = new QComboBox(false, this, "cycleList");

    QLabel *effectiveDateLabel = new QLabel("Effective Date:", this, "effectiveDateLabel");
    effectiveDateLabel->setAlignment(AlignRight|AlignVCenter);

    effectiveDate = new Q3DateEdit(QDate::currentDate(), this, "effectiveDate");

    QPushButton *saveButton = new QPushButton("&Save", this, "saveButton");
    connect(saveButton, SIGNAL(clicked()), this, SLOT(saveBillingCycleChange()));

    QPushButton *cancelButton = new QPushButton("&Save", this, "cancelButton");
    connect(cancelButton, SIGNAL(clicked()), this, SLOT(cancelBillingCycleChange()));

    // Our layout.
    Q3BoxLayout  *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 3);

    Q3GridLayout *gl = new Q3GridLayout(2, 3);
    int curRow = 0;
    gl->addWidget(customerLabel,        curRow, 0);
    gl->addWidget(customer,             curRow, 1);
    gl->setRowStretch(curRow, 0);

    curRow++;
    gl->addWidget(cycleListLabel,       curRow, 0);
    gl->addWidget(cycleList,            curRow, 1);
    gl->setRowStretch(curRow, 0);

    curRow++;
    gl->addWidget(effectiveDateLabel,   curRow, 0);
    gl->addWidget(effectiveDate,        curRow, 1);
    gl->setRowStretch(curRow, 0);

    gl->setColStretch(0, 0);
    gl->setColStretch(1, 1);

    ml->addLayout(gl, 0);
    ml->addStretch(1);

    Q3BoxLayout *bl = new Q3BoxLayout(Q3BoxLayout::LeftToRight, 3);
    bl->addStretch(1);
    bl->addWidget(saveButton, 0);
    bl->addWidget(cancelButton, 0);

    ml->addLayout(bl, 0);

	
	// Load the list of rate plans.
	ADB         DB;
	CustomersDB CDB;
	char        tmpStr[1024];
	
	CDB.get(CustID);
	
	sprintf(tmpStr, "%s (%ld)", (const char *) CDB.getStr("FullName"), myCustID);
	customer->setText(tmpStr);
	
	DB.query("select CycleID,InternalID from BillingCycles order by CycleID");
	while (DB.getrow()) {
	    cycleList->insertItem(DB.curRow["CycleID"]);
	    if (atol(DB.curRow["InternalID"]) == CDB.getLong("BillingCycle")) {
	        cycleList->setCurrentItem(cycleList->count()-1);
	    }
	}
	

}

LogVoiceMail::LogVoiceMail
(
	QWidget* parent,
	const char* name
) : TAAWidget(parent)
{
    setCaption( "Voice Mail Logging" );

    // Create the widgets
    QLabel *dateLabel = new QLabel(this);
    dateLabel->setAlignment(Qt::AlignRight|Qt::AlignVCenter);
    dateLabel->setText("D&ate/Time:");

    msgDateTime = new Q3DateTimeEdit(QDateTime::currentDateTime(), this, "MsgDateTime");
    dateLabel->setBuddy(msgDateTime);
    
    QLabel *messageLabel = new QLabel(this);
    messageLabel->setAlignment(Qt::AlignRight|Qt::AlignTop);
    messageLabel->setText("M&essage:");

    message = new Q3MultiLineEdit(this);
    message->setWordWrap(Q3MultiLineEdit::WidgetWidth);
    messageLabel->setBuddy(message);

    saveButton = new QPushButton(this);
    saveButton->setText("&Save");
    connect(saveButton, SIGNAL(clicked()), this, SLOT(saveMessage()));

    closeButton = new QPushButton(this);
    closeButton->setText("&Close");
    connect(closeButton, SIGNAL(clicked()), this, SLOT(closeClicked()));

    statusLabel = new QLabel(this);
    statusLabel->setAlignment(Qt::AlignLeft|Qt::AlignVCenter);
    statusLabel->setFrameStyle(Q3Frame::Panel|Q3Frame::Sunken);
    statusLabel->setMinimumSize(0, 20);

    // Now, create our layouts
    // Date/time area.
    Q3GridLayout *dtl = new Q3GridLayout(2, 4, 3);
    dtl->setColStretch(0, 0);
    dtl->setColStretch(1, 1);
    dtl->setColStretch(2, 0);
    dtl->setColStretch(3, 1);
    dtl->setRowStretch(0, 0);
    dtl->setRowStretch(1, 1);

    dtl->addWidget(dateLabel,               0, 0);
    dtl->addMultiCellWidget(msgDateTime,    0, 0, 1, 3);
    dtl->addWidget(messageLabel,            1, 0);
    dtl->addMultiCellWidget(message,        1, 1, 1, 3);

    // The action button layout.
    Q3BoxLayout *abl = new Q3BoxLayout(Q3BoxLayout::LeftToRight, 5);
    abl->addStretch(1);
    abl->addWidget(saveButton, 0);
    abl->addWidget(closeButton, 0);
    abl->addSpacing(5);

    // The main layout.
    Q3BoxLayout *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 0, 0);
    ml->addSpacing(3);
    ml->addLayout(dtl, 1);
    ml->addSpacing(3);
    ml->addLayout(abl, 0);
    ml->addSpacing(3);
    ml->addWidget(statusLabel, 0);

    // Done.

    msgDateTime->setFocus();

    resize(350, 180);
}

//.........这里部分代码省略.........
    amountSelected->setText("$0.00");
    amountSelected->setAlignment(AlignRight | AlignVCenter);

    QLabel  *targetAccountLabel = new QLabel(this, "targetAccountLabel");
    targetAccountLabel->setText("Target Account:");
    targetAccountLabel->setAlignment(AlignRight | AlignVCenter);

    targetAccountList = new QComboBox(false, this, "targetAccountList");

    QLabel  *transDateLabel = new QLabel(this, "transDateLabel");
    transDateLabel->setText("Desposit Date:");
    transDateLabel->setAlignment(AlignRight | AlignVCenter);

    transDate = new Q3DateEdit(QDate::currentDate(), this, "transDate");

    // Our buttons now.
    QPushButton *printButton = new QPushButton(this, "printButton");
    printButton->setText("&Print");
    connect(printButton, SIGNAL(clicked()), this, SLOT(printSelected()));
    
    QPushButton *selectAllButton = new QPushButton(this, "selectAllButton");
    selectAllButton->setText("Select &All");
    connect(selectAllButton, SIGNAL(clicked()), this, SLOT(selectAll()));

    QPushButton *selectNoneButton = new QPushButton(this, "selectNoneButton");
    selectNoneButton->setText("Select &None");
    connect(selectNoneButton, SIGNAL(clicked()), this, SLOT(selectNone()));

    QPushButton *continueButton = new QPushButton(this, "continueButton");
    continueButton->setText("C&ontinue");
    connect(continueButton, SIGNAL(clicked()), this, SLOT(processSelections()));

    QPushButton *cancelButton = new QPushButton(this, "cancelButton");
    cancelButton->setText("&Cancel");
    connect(cancelButton, SIGNAL(clicked()), this, SLOT(cancelSelected()));

    // Create our layout.
    Q3BoxLayout  *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 3, 3);

    ml->addWidget(paymentList, 1);

    // A grid for our labels and account selection.
    Q3GridLayout *asl = new Q3GridLayout(3, 2);
    asl->setColStretch(0, 0);
    asl->setColStretch(1, 1);
    int curRow = 0;

    asl->addWidget(selectedItemCountLabel,          curRow, 0);
    asl->addWidget(selectedItemCount,               curRow, 1);
    asl->setRowStretch(curRow++, 0);
    asl->addWidget(undepositedAmountLabel,          curRow, 0);
    asl->addWidget(undepositedAmount,               curRow, 1);
    asl->setRowStretch(curRow++, 0);
    asl->addWidget(amountSelectedLabel,             curRow, 0);
    asl->addWidget(amountSelected,                  curRow, 1);
    asl->setRowStretch(curRow++, 0);
    asl->addWidget(targetAccountLabel,              curRow, 0);
    asl->addWidget(targetAccountList,               curRow, 1);
    asl->setRowStretch(curRow++, 0);
    asl->addWidget(transDateLabel,                  curRow, 0);
    asl->addWidget(transDate,                       curRow, 1);
    asl->setRowStretch(curRow++, 0);

    // Now our button layout
    Q3BoxLayout *bl = new Q3BoxLayout(Q3BoxLayout::LeftToRight, 3);
    bl->addStretch(1);
    bl->addWidget(printButton,      0);
    bl->addWidget(selectAllButton,  0);
    bl->addWidget(selectNoneButton, 0);
    bl->addWidget(continueButton,   0);
    bl->addWidget(cancelButton,     0);

    // Add the buttons to our other widget layout
    //owl->addLayout(bl, 0);

    // Add the other widget layout to our main layout.
    ml->addLayout(asl, 0);
    ml->addWidget(new HorizLine(this), 0);
    ml->addLayout(bl, 0);

    // Done with the layout.

    // Fill our account list.
    ADB     DB;
    int     tmpPos = 0;
    DB.query("select IntAccountNo, AccountNo, AcctName from Accounts order by AccountNo");
    accountIDX = new long[DB.rowCount+2];
    accountIDX[0] = 0;
    QString tmpStr;
    if (DB.rowCount) while (DB.getrow()) {
        accountIDX[tmpPos++] = atol(DB.curRow["IntAccountNo"]);
        tmpStr = DB.curRow["AccountNo"];
        tmpStr += " ";
        tmpStr += DB.curRow["AcctName"];
        targetAccountList->insertItem(tmpStr);
    }
    
    selTotal = 0.00;
    fillDepositList();
}

FreqView::FreqView(int viewID_, QWidget *parent)
  : ViewWidget(viewID_, parent)
{
  View *view = gdata->view;

  //setCaption("Frequency View");

  Q3BoxLayout *mainLayout = new Q3VBoxLayout(this);
  mainLayout->setResizeMode(QLayout::SetNoConstraint);
  //QBoxLayout *topLayout = new QVBoxLayout(mainLayout);
  //QBoxLayout *rightLayout = new QVBoxLayout(mainLayout);
  //QBoxLayout *bottomLayout = new QHBoxLayout(mainLayout);


  QSplitter *splitter = new QSplitter(Qt::Vertical, this);
  QWidget *topWidget = new QWidget(splitter);
  //topSplitter->setOpaqueResize(true);
  Q3BoxLayout *topLayout = new Q3HBoxLayout(topWidget);
  Q3BoxLayout *topLeftLayout = new Q3VBoxLayout(topLayout);
  
  timeAxis = new TimeAxis(topWidget, gdata->leftTime(), gdata->rightTime(), true);
  timeAxis->setWhatsThis("The time in seconds");
  topLeftLayout->addWidget(timeAxis);
  
/*
  Q3Grid *freqFrame = new Q3Grid(1, topWidget);
  freqFrame->setFrameStyle(Q3Frame::WinPanel | Q3Frame::Sunken);
  //freqDrawWidget = new FreqDrawWidget(freqFrame);
  //freqDrawWidget->setFocusPolicy(Qt::NoFocus);
  freqWidgetGL = new FreqWidgetGL(freqFrame);
  freqWidgetGL->setFocusPolicy(Qt::NoFocus);
  topLeftLayout->addWidget(freqFrame);
*/
  QFrame *freqFrame = new QFrame;
  freqFrame->setFrameStyle(QFrame::WinPanel | QFrame::Sunken);
  QVBoxLayout *freqFrameLayout = new QVBoxLayout;
  freqWidgetGL = new FreqWidgetGL(NULL);
  freqWidgetGL->setWhatsThis("The line represents the musical pitch of the sound. A higher pitch moves up, with note names shown at the left, with octave numbers. "
    "The black vertical line shows the current time. This line's position can be moved. "
    "Pitch-lines are drawn connected only because they change a small amount over a small time step. "
    "Note: This may cause semi-tone note changes appear to be joined. Clicking the background and dragging moves the view. "
    "Clicking a pitch-line selects it. Mouse-Wheel scrolls. Shift-Mouse-Wheel zooms");
  //freqWidgetGL = new FreqDrawWidget(NULL);
  freqFrameLayout->addWidget(freqWidgetGL);
  freqFrameLayout->setMargin(0);
  freqFrameLayout->setSpacing(0);
  freqFrame->setLayout(freqFrameLayout);
  topLeftLayout->addWidget(freqFrame);


  //Q3BoxLayout *topRightLayout = new Q3VBoxLayout(topLayout);
  QVBoxLayout *topRightLayout = new QVBoxLayout();
  
  freqWheelY = new QwtWheel(topWidget);
  freqWheelY->setOrientation(Qt::Vertical);
  freqWheelY->setWheelWidth(14);
  freqWheelY->setRange(1.6, 5.0, 0.001, 1);
  //freqWheelY->setValue(3.2);
  //view->setZoomFactorY(3.2);
  freqWheelY->setValue(view->logZoomY());
  QToolTip::add(freqWheelY, "Zoom pitch contour view vertically");
  topRightLayout->addSpacing(20);
  topRightLayout->addWidget(freqWheelY, 0);
  
  //Create the vertical scrollbar
  //vScrollBar = new MyScrollBar(0, toInt((view->topNote()-view->viewHeight())*view->stepY()), 20, toInt(view->viewHeight()*view->stepY()), toInt(view->viewBottom()*view->stepY()), Qt::Vertical, this);
  //vScrollBar = new MyScrollBar(0, gdata->topNote()-view->viewHeight(), 20, view->viewHeight(), view->viewBottom(), 20, Qt::Vertical, this);
  freqScrollBar = new MyScrollBar(0, gdata->topPitch()-view->viewHeight(), 0.5, view->viewHeight(), 0, 20, Qt::Vertical, topWidget);
  freqScrollBar->setValue(gdata->topPitch()-view->viewHeight()-view->viewBottom());
  topRightLayout->addWidget(freqScrollBar, 4);

  topLayout->addLayout(topRightLayout);

/*
  QPushButton *buttonPlusY = new QPushButton("+", topSplitter);
  buttonPlusY->setSizePolicy(QSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed));
  buttonPlusY->setFixedSize(15, 15);
  QToolTip::add(buttonPlusY, "Zoom in vertically");
  QPushButton *buttonMinusY = new QPushButton("-", topSplitter);
  buttonMinusY->setSizePolicy(QSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed));
  buttonMinusY->setFixedSize(15, 15);
  QToolTip::add(buttonMinusY, "Zoom out vertically");
*/  
  

  //------------bottom half------------------
  
  QWidget *bottomWidget = new QWidget(splitter);
  Q3BoxLayout *bottomLayout = new Q3VBoxLayout(bottomWidget);
  Q3BoxLayout *bottomTopLayout = new Q3HBoxLayout(bottomLayout);
  
/*
  Q3Grid *amplitudeFrame = new Q3Grid(1, bottomWidget);
  amplitudeFrame->setFrameStyle(Q3Frame::WinPanel | Q3Frame::Sunken);
  amplitudeWidget = new AmplitudeWidget(amplitudeFrame);
  bottomTopLayout->addWidget(amplitudeFrame);
*/
  QFrame *amplitudeFrame = new QFrame;
  amplitudeFrame->setFrameStyle(QFrame::WinPanel | QFrame::Sunken);
  QVBoxLayout *amplitudeFrameLayout = new QVBoxLayout;
//.........这里部分代码省略.........

CustomerSearch::CustomerSearch(QWidget *parent, const char *name, Qt::WFlags f)
    : TAAWidget(parent, f)
{
    // A simple (in appearance) widget that will allow the user to
    // search for, and select, a customer.
    //
    // The layout will look like so:
    //
    //  Query: [ Search Box         ] [Search] [Clear]
    //  +---------+----------+-----------------------+
    //  + Cust ID | Login ID | Account Name          |
    //  +         |          |                       |
    //  +---------+----------+-----------------------+
    //
    // When the user types something in the search box and presses enter
    // or clicks the search button, the widget will do a search on the
    // customer database against the search text and fill in the list.
    // When the user clicks or scrolls onto an entry, itemHighlighted()
    // will be emitted with the customer ID.  When the user double clicks
    // or presses enter on an entry itemSelected() will be emitted with
    // the customer ID.


    searchText = new QLineEdit(this, "SearchText");
    searchText->setMaxLength(80);
    connect(searchText, SIGNAL(returnPressed()), this, SLOT(startSearch()));
    
    QLabel  *queryLabel = new QLabel(this, "Query Label");
    queryLabel->setText("&Query:");
    queryLabel->setAlignment(Qt::AlignRight|Qt::AlignVCenter);
    queryLabel->setBuddy(searchText);

    searchButton = new QPushButton(this, "SearchButton");
    searchButton->setText("Search");
    connect(searchButton, SIGNAL(clicked()), this, SLOT(startSearch()));

    QPushButton *clearButton = new QPushButton(this, "Clear Button");
    clearButton->setText("C&lear");
    connect(clearButton, SIGNAL(clicked()), this, SLOT(clearSearch()));

    custList = new Q3ListView(this, "SearchResults");
    custList->setMargin(2);
    custList->setAllColumnsShowFocus(true);
    custList->setRootIsDecorated(true);
    custList->addColumn("Account Name");
    custList->addColumn("LoginID");
    custList->addColumn("Cust ID");
    connect(custList, SIGNAL(currentChanged(Q3ListViewItem *)), this, SLOT(itemHighlighted(Q3ListViewItem *)));
    connect(custList, SIGNAL(doubleClicked(Q3ListViewItem *)), this, SLOT(itemSelected(Q3ListViewItem *)));
    connect(custList, SIGNAL(returnPressed(Q3ListViewItem *)), this, SLOT(itemSelected(Q3ListViewItem *)));

    Q3BoxLayout *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 0, 0);
    Q3BoxLayout *sl = new Q3BoxLayout(Q3BoxLayout::LeftToRight, 0);
    sl->addSpacing(3);
    sl->addWidget(queryLabel, 0);
    sl->addSpacing(3);
    sl->addWidget(searchText, 1);
    sl->addSpacing(3);
    sl->addWidget(searchButton, 0);
    sl->addWidget(clearButton, 0);
    ml->addLayout(sl, 0);
    ml->addSpacing(3);
    ml->addWidget(custList, 1);

}

DomainAliases::DomainAliases(QWidget *parent, const char *name)
   : TAAWidget(parent)
{
    setCaption("Email Alias List");
    // Create the widgets we'll need
    aliasList = new Q3ListView(this, "Alias List");
    aliasList->addColumn("Address");
    aliasList->addColumn("Domain");
    aliasList->addColumn("Mailbox");
    aliasList->addColumn("Time Stamp");
    aliasList->addColumn("Added By");
    aliasList->setAllColumnsShowFocus(true);
    virtIDCol = 5;

    address = new QLineEdit(this, "Address Input");
    address->setMaxLength(63);

    QLabel  *atLabel = new QLabel(this, "At label");
    atLabel->setText("@");

    QLabel  *mapsToLabel = new QLabel(this, "Maps To label");
    mapsToLabel->setText("maps to");

    domainList = new QComboBox(this, false);
    loginList = new QComboBox(this, false);


    addButton = new QPushButton(this, "Add Button");
    addButton->setText("&Add");
    connect(addButton, SIGNAL(clicked()), this, SLOT(addAlias()));

    refreshButton = new QPushButton(this, "Refresh Button");
    refreshButton->setText("&Refresh");
    connect(refreshButton, SIGNAL(clicked()), this, SLOT(refreshAlias()));

    autoButton = new QPushButton(this, "Auto Button");
    autoButton->setText("A&uto");
    connect(autoButton, SIGNAL(clicked()), this, SLOT(autoAlias()));

    delButton = new QPushButton(this, "Delete Button");
    delButton->setText("&Delete");
    connect(delButton, SIGNAL(clicked()), this, SLOT(delAlias()));
    
    closeButton = new QPushButton(this, "Close Button");
    closeButton->setText("&Close");
    connect(closeButton, SIGNAL(clicked()), this, SLOT(close()));

    HorizLine *hline1 = new HorizLine(this);

    // Our layout now.  Very simple top down box.
    Q3BoxLayout *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 3, 3);
    ml->addWidget(aliasList, 1);

    // Add in our "add" line.
    Q3BoxLayout *addl = new Q3BoxLayout(Q3BoxLayout::LeftToRight, 3);
    addl->addWidget(address, 1);
    addl->addWidget(atLabel, 0);
    addl->addWidget(domainList, 0);
    addl->addWidget(mapsToLabel, 0);
    addl->addWidget(loginList, 0);
    addl->addWidget(addButton, 0);

    ml->addLayout(addl, 0);
    ml->addWidget(hline1, 0);

    Q3GridLayout *bl = new Q3GridLayout(1, 4);
    int curCol = 0;
    bl->addWidget(refreshButton,    0, curCol++);
    bl->addWidget(autoButton,       0, curCol++);
    bl->addWidget(delButton,        0, curCol++);
    bl->addWidget(closeButton,      0, curCol++);
    for (int i = 0; i < curCol; i++) bl->setColStretch(i, 1);
    bl->setRowStretch(0, 0);

    // Now, the "button bar layout" to keep things spaced nicely.
    Q3BoxLayout  *bbl = new Q3BoxLayout(Q3BoxLayout::LeftToRight, 0);
    bbl->addStretch(1);
    bbl->addLayout(bl, 0);
    ml->addLayout(bbl);
} 

CallWizard::CallWizard
(
	QWidget* parent,
	const char* name
) : TAAWidget(parent)
{
    setCaption("Call Logger");
    titleBar = new QStatusBar(this);
    titleBar->setSizeGripEnabled(false);
    titleBar->message("Call Logger");

    QLabel *hline1 = new QLabel(this);
    hline1->setFrameStyle(Q3Frame::HLine|Q3Frame::Sunken);
    hline1->setMaximumHeight(3);

    hangupButton   = new QPushButton(this, "Hangup Button");
    hangupButton->setText("Han&g Up");
    connect(hangupButton, SIGNAL(clicked()), this, SLOT(stopTimer()));

    transferButton = new QPushButton(this, "Transfer Button");
    transferButton->setText("&Transfer");
    transferButton->hide();

    proceedButton = new QPushButton(this, "Proceed Button");
    proceedButton->setText("&Proceed");
    
    QLabel *hline2 = new QLabel(this);
    hline2->setFrameStyle(Q3Frame::HLine|Q3Frame::Sunken);
    hline2->setMaximumHeight(3);
    status = new QStatusBar(this);
    status->message("Status bar here.");

    mainArea = new Q3WidgetStack(this);
    typeSel = new CallTypeSelector(mainArea, "CallTypeSelector");
    mainArea->addWidget(typeSel, 0);
    mainArea->raiseWidget(0);

    // Now, do the layout for the widget.
    Q3BoxLayout  *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 0, 3);
    ml->addWidget(titleBar, 0);
    ml->addWidget(hline1, 0);
    ml->addWidget(mainArea, 1);

    Q3BoxLayout  *butlay = new Q3BoxLayout(Q3BoxLayout::LeftToRight, 3);
    butlay->addStretch(1);
    butlay->addWidget(hangupButton, 0);
    butlay->addWidget(transferButton, 0);
    butlay->addWidget(proceedButton, 0);
    butlay->addSpacing(3);

    ml->addLayout(butlay, 0);
    ml->addWidget(hline2, 0);
    ml->addWidget(status, 0);

    callStart = QDateTime::currentDateTime();
    callEnd   = QDateTime::currentDateTime();

    clockLCD = new QLCDNumber(status, "Clock Timer");
    clockLCD->setMode(QLCDNumber::DEC);
    clockLCD->setSegmentStyle(QLCDNumber::Flat);
    clockLCD->setNumDigits(7);
    clockLCD->display("0:00:00");

    status->addWidget(clockLCD, 0, true);

    clockTimer = new QTimer(this);
    connect(clockTimer, SIGNAL(timeout()), this, SLOT(updateClock()));
    clockTimer->start(1000);
    timerRunning = 1;

    // Make it the same width as an 80 column wide RXVT terminal window.
    resize(499, 385);
}

Tab_Logins::Tab_Logins
(
	QWidget* parent,
	const char* name,
	long CustID
) : TAAWidget(parent)
{

	setCaption( "Logins" );
	myCustID = CustID;


    // Create all of our widgets.
    list = new Q3ListView(this, "LoginList");
	list->addColumn("Login ID");
	list->addColumn("Login Type");
	list->addColumn("Contact Name");
	list->addColumn("Last Modified");
	list->addColumn("Disk");
	list->addColumn("Flags");
	list->addColumn("Active");
	list->setAllColumnsShowFocus(TRUE);
	list->setColumnAlignment(4, AlignRight);
	list->setColumnAlignment(5, AlignRight);
	list->setColumnAlignment(6, AlignCenter);
    list->setItemMargin( 2 );

    newButton = new QPushButton(this, "NewButton");
    newButton->setText("&New");
    connect(newButton, SIGNAL(clicked()), this, SLOT(createNewLogin()));

    openCloseButton = new QPushButton(this, "OpenCloseButton");
    openCloseButton->setText("(&De)Activate");
    connect(openCloseButton, SIGNAL(clicked()), this, SLOT(unlockLogin()));

    passwdButton = new QPushButton(this, "PasswdButton");
    passwdButton->setText("&Password");
    connect(passwdButton, SIGNAL(clicked()), this, SLOT(changePassword()));

    QPushButton *loginFlagsButton = new QPushButton(this, "LoginFlagsButton");
    loginFlagsButton->setText("Fla&gs");
    connect(loginFlagsButton, SIGNAL(clicked()), this, SLOT(loginFlagsClicked()));

    editButton = new QPushButton(this, "EditButton");
    editButton->setText("&Edit");
    connect(editButton, SIGNAL(clicked()), this, SLOT(editLogin()));

    modemUsageButton = new QPushButton(this, "Modem Usage Button");
    modemUsageButton->setText("&Modem Usage");
    connect(modemUsageButton, SIGNAL(clicked()), this, SLOT(modemUsageReport()));

    bandwidthButton = new QPushButton(this, "BandwidthButton");
    bandwidthButton->setText("&Bandwidth");
    connect(bandwidthButton, SIGNAL(clicked()), this, SLOT(bandwidthUsageReport()));

    QPushButton *diskSpaceButton = new QPushButton(this, "DiskSpaceButton");
    diskSpaceButton->setText("D&isk Space");
    connect(diskSpaceButton, SIGNAL(clicked()), this, SLOT(diskSpaceClicked()));
    diskSpaceButton->setEnabled(false);
    
    adminMenuArea = new QLabel(this, "Admin Menu Area");
    adminMenu = new Q3PopupMenu;
    adminMenu->insertItem("&Set Primary Login", this, SLOT(setPrimaryLogin()));
    adminMenu->insertItem("&Transfer Login", this, SLOT(transferLogin()));
    if (isAdmin()) adminMenu->insertItem("&Wipe Login", this, SLOT(wipeLogin()));
	
	QMenuBar    *tmpMenu;
	tmpMenu = new QMenuBar(adminMenuArea, "Administrivia");
    tmpMenu->insertItem("&Administrivia", adminMenu);

    hideWiped = new QCheckBox(this, "HideWiped");
    hideWiped->setText("&Hide Wiped");
    hideWiped->setChecked(true);
    connect(hideWiped, SIGNAL(toggled(bool)), this, SLOT(hideWipedChanged(bool)));

    // Create our layouts.  A top to bottom box, with a grid in it.
    Q3BoxLayout *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 3, 3);
    ml->addWidget(list, 1);

    Q3GridLayout *bl = new Q3GridLayout(2, 6);
    bl->addWidget(newButton,            0, 0);
    bl->addWidget(openCloseButton,      0, 1);
    bl->addWidget(passwdButton,         0, 2);
    bl->addWidget(loginFlagsButton,     0, 3);
    bl->addWidget(adminMenuArea,        0, 5);
    
    bl->addWidget(editButton,           1, 0);
    bl->addWidget(modemUsageButton,     1, 1);
    bl->addWidget(bandwidthButton,      1, 2);
    bl->addWidget(diskSpaceButton,      1, 3);
    bl->addWidget(hideWiped,            1, 5);

    for (int i = 0 ; i < 5; i++) bl->setColStretch(i, 1);
    bl->setRowStretch(0, 0);
    bl->setRowStretch(1, 0);

    ml->addLayout(bl, 0);

	
	
//.........这里部分代码省略.........

LogCall::LogCall
(
	QWidget* parent,
	const char* name
) : TAAWidget(parent)
{

    setCaption("Call Logger");

    // Create all of our widgets.
    loginID = new QLineEdit(this, "loginID");
    loginID->setMaxLength(16);
    connect(loginID, SIGNAL(textChanged(const QString &)), this, SLOT(loginIDChanged(const QString &)));
    loginIDLabel = new QLabel(loginID, "&Login ID", this);
    loginIDLabel->setAlignment(AlignRight|AlignVCenter);

    searchButton = new QPushButton(this, "searchButton");
    searchButton->setText("&Search");
    connect(searchButton, SIGNAL(clicked()), this, SLOT(findLogin()));
    
    // Searching doesn't really work very well, so lets hide the button for
    // now.
    searchButton->hide();

    callType = new QComboBox(false, this, "callType");
    callType->insertItem("Support");
    callType->insertItem("Sales");
    callType->insertItem("New User");
    callType->insertItem("Accounting");
    connect(callType, SIGNAL(highlighted(int)), this, SLOT(callTypeChanged(int)));
    typeLabel = new QLabel(callType, "&Type", this);
    typeLabel->setAlignment(AlignRight|AlignVCenter);

    reasonList = new Q3ListView(this, "reasonList");
    reasonList->addColumn("Call Subject");
    reasonList->setMaximumHeight(125);
    reasonLabel = new QLabel(reasonList, "&Reason", this);
    reasonLabel->setAlignment(AlignRight|AlignTop);
    
    solutionNotes = new Q3MultiLineEdit(this, "solutionNotes");
    solutionNotes->setWordWrap(Q3MultiLineEdit::WidgetWidth);
    solutionLabel = new QLabel(solutionNotes, "S&olution", this);
    solutionLabel->setAlignment(AlignRight|AlignTop);
    
    // Now, our buttons.
    custWinButton = new QPushButton(this, "custWinButton");
    custWinButton->setText("&Customer Window");
    connect(custWinButton, SIGNAL(clicked()), this, SLOT(loadCustomer()));
    
    clockButton = new QPushButton(this, "clockButton");
    clockButton->setText("Sto&p Timer");
    connect(clockButton, SIGNAL(clicked()), this, SLOT(toggleTimer()));

    doneButton = new QPushButton(this, "doneButton");
    doneButton->setText("&Done");
    connect(doneButton, SIGNAL(clicked()), this, SLOT(hangupCall()));

    statusLabel = new QLabel(this, "statusLabel");
    statusLabel->setFrameStyle(Q3Frame::Sunken|Q3Frame::WinPanel);

    clockArea = new QLCDNumber(this, "clockArea");
    clockArea->setMode(QLCDNumber::DEC);
    clockArea->setSegmentStyle(QLCDNumber::Flat);
    clockArea->setNumDigits(7);

    
    // Main Layout, top to bottom, with a grid and stuff thrown in.
    Q3BoxLayout  *ml = new Q3BoxLayout(this, Q3BoxLayout::TopToBottom, 3, 3);

    Q3GridLayout *gl = new Q3GridLayout(3, 5);
    gl->setRowStretch(0, 0);
    gl->setRowStretch(1, 0);
    gl->setRowStretch(2, 1);
    gl->setColStretch(0, 0);
    gl->setColStretch(1, 1);
    gl->setColStretch(2, 0);
    gl->setColStretch(3, 0);
    gl->setColStretch(4, 0);

    gl->addWidget(loginIDLabel,             0, 0);
    gl->addWidget(loginID,                  0, 1);
    gl->addWidget(searchButton,             0, 2);
    gl->addWidget(typeLabel,                0, 3);
    gl->addWidget(callType,                 0, 4);

    gl->addWidget(reasonLabel,              1, 0);
    gl->addMultiCellWidget(reasonList,      1, 1, 1, 4);
    
    gl->addWidget(solutionLabel,            2, 0);
    gl->addMultiCellWidget(solutionNotes,   2, 2, 1, 4);

    ml->addLayout(gl, 1);

    Q3BoxLayout  *abl = new Q3BoxLayout(Q3BoxLayout::LeftToRight, 0);
    abl->addWidget(custWinButton,  1);
    abl->addWidget(clockButton,  1);
    abl->addWidget(doneButton,  1);

    // These options don't really work very well, so lets disable them for
    // now.
//.........这里部分代码省略.........