本文整理汇总了C++中ProfileMap类的典型用法代码示例。如果您正苦于以下问题：C++ ProfileMap类的具体用法？C++ ProfileMap怎么用？C++ ProfileMap使用的例子？那么, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了ProfileMap类的4个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: ReadPortType
void
Profile::GetDeviceConfig(const ProfileMap &map, unsigned n,
DeviceConfig &config)
{
char buffer[64];
bool have_port_type = ReadPortType(map, n, config.port_type);
MakeDeviceSettingName(buffer, "Port", n, "BluetoothMAC");
map.Get(buffer, config.bluetooth_mac);
MakeDeviceSettingName(buffer, "Port", n, "IOIOUartID");
map.Get(buffer, config.ioio_uart_id);
MakeDeviceSettingName(buffer, "Port", n, "IPAddress");
if (!map.Get(buffer, config.ip_address))
config.ip_address.clear();
MakeDeviceSettingName(buffer, "Port", n, "TCPPort");
if (!map.Get(buffer, config.tcp_port))
config.tcp_port = 4353;
config.path.clear();
if ((!have_port_type ||
config.port_type == DeviceConfig::PortType::SERIAL) &&
!LoadPath(map, config, n) && LoadPortIndex(map, config, n))
config.port_type = DeviceConfig::PortType::SERIAL;
MakeDeviceSettingName(buffer, "Port", n, "BaudRate");
if (!map.Get(buffer, config.baud_rate)) {
/* XCSoar before 6.2 used to store a "speed index", not the real
baud rate - try to import the old settings */
static constexpr unsigned speed_index_table[] = {
1200,
2400,
4800,
9600,
19200,
38400,
57600,
115200
};
MakeDeviceSettingName(buffer, "Speed", n, "Index");
unsigned speed_index;
if (map.Get(buffer, speed_index) &&
speed_index < ARRAY_SIZE(speed_index_table))
config.baud_rate = speed_index_table[speed_index];
}
MakeDeviceSettingName(buffer, "Port", n, "BulkBaudRate");
if (!map.Get(buffer, config.bulk_baud_rate))
config.bulk_baud_rate = 0;
strcpy(buffer, "DeviceA");
buffer[strlen(buffer) - 1] += n;
map.Get(buffer, config.driver_name);
MakeDeviceSettingName(buffer, "Port", n, "Enabled");
map.Get(buffer, config.enabled);
MakeDeviceSettingName(buffer, "Port", n, "SyncFromDevice");
map.Get(buffer, config.sync_from_device);
MakeDeviceSettingName(buffer, "Port", n, "SyncToDevice");
map.Get(buffer, config.sync_to_device);
MakeDeviceSettingName(buffer, "Port", n, "K6Bt");
map.Get(buffer, config.k6bt);
MakeDeviceSettingName(buffer, "Port", n, "I2C_Bus");
map.Get(buffer, config.i2c_bus);
MakeDeviceSettingName(buffer, "Port", n, "I2C_Addr");
map.Get(buffer, config.i2c_addr);
MakeDeviceSettingName(buffer, "Port", n, "PressureUse");
map.GetEnum(buffer, config.press_use);
MakeDeviceSettingName(buffer, "Port", n, "SensorOffset");
map.Get(buffer, config.sensor_offset);
MakeDeviceSettingName(buffer, "Port", n, "SensorFactor");
map.Get(buffer, config.sensor_factor);
MakeDeviceSettingName(buffer, "Port", n, "UseSecondDevice");
map.Get(buffer, config.use_second_device);
MakeDeviceSettingName(buffer, "Port", n, "SecondDevice");
map.Get(buffer, config.driver2_name);
}示例2:
void
Profile::Load(const ProfileMap &map, FinishConstraints &constraints)
{
map.GetEnum(ProfileKeys::FinishHeightRef, constraints.min_height_ref);
map.Get(ProfileKeys::FinishMinHeight, constraints.min_height);
}示例3: LoadTerrainRendererSettings
void
Profile::Load(const ProfileMap &map, MapSettings &settings)
{
map.Get(ProfileKeys::CircleZoom, settings.circle_zoom_enabled);
map.Get(ProfileKeys::MaxAutoZoomDistance, settings.max_auto_zoom_distance);
map.Get(ProfileKeys::DrawTopography, settings.topography_enabled);
LoadTerrainRendererSettings(map, settings.terrain);
map.GetEnum(ProfileKeys::AircraftSymbol, settings.aircraft_symbol);
map.Get(ProfileKeys::DetourCostMarker, settings.detour_cost_markers_enabled);
map.GetEnum(ProfileKeys::DisplayTrackBearing, settings.display_ground_track);
map.Get(ProfileKeys::AutoZoom, settings.auto_zoom_enabled);
map.GetEnum(ProfileKeys::WindArrowStyle, settings.wind_arrow_style);
settings.waypoint.LoadFromProfile();
Load(map, settings.airspace);
map.Get(ProfileKeys::GliderScreenPosition, settings.glider_screen_position);
bool orientation_found = false;
unsigned Temp = (unsigned)MapOrientation::NORTH_UP;
if (map.Get(ProfileKeys::OrientationCircling, Temp)) {
orientation_found = true;
if (IsValidMapOrientation(Temp))
settings.circling_orientation = (MapOrientation)Temp;
}
Temp = (unsigned)MapOrientation::NORTH_UP;
if (map.Get(ProfileKeys::OrientationCruise, Temp)) {
orientation_found = true;
if (IsValidMapOrientation(Temp))
settings.cruise_orientation = (MapOrientation)Temp;
}
if (!orientation_found) {
Temp = 1;
map.Get(ProfileKeys::DisplayUpValue, Temp);
switch (Temp) {
case 0:
settings.cruise_orientation = MapOrientation::TRACK_UP;
settings.circling_orientation = MapOrientation::TRACK_UP;
break;
case 1:
settings.cruise_orientation = MapOrientation::NORTH_UP;
settings.circling_orientation = MapOrientation::NORTH_UP;
break;
case 2:
settings.cruise_orientation = MapOrientation::TRACK_UP;
settings.circling_orientation = MapOrientation::NORTH_UP;
break;
case 3:
settings.cruise_orientation = MapOrientation::TRACK_UP;
settings.circling_orientation = MapOrientation::TARGET_UP;
break;
case 4:
settings.cruise_orientation = MapOrientation::NORTH_UP;
settings.circling_orientation = MapOrientation::TRACK_UP;
break;
}
}
fixed tmp;
if (map.Get(ProfileKeys::ClimbMapScale, tmp))
settings.circling_scale = Clamp(tmp / 10000, fixed(0.0003), fixed(10));
if (map.Get(ProfileKeys::CruiseMapScale, tmp))
settings.cruise_scale = Clamp(tmp / 10000, fixed(0.0003), fixed(10));
map.GetEnum(ProfileKeys::MapShiftBias, settings.map_shift_bias);
map.Get(ProfileKeys::EnableFLARMMap, settings.show_flarm_on_map);
map.Get(ProfileKeys::EnableThermalProfile, settings.show_thermal_profile);
map.Get(ProfileKeys::EnableFinalGlideBarMC0,
settings.final_glide_bar_mc0_enabled);
map.GetEnum(ProfileKeys::FinalGlideBarDisplayMode,
settings.final_glide_bar_display_mode);
map.Get(ProfileKeys::ShowFAITriangleAreas,
settings.show_fai_triangle_areas);
::Load(map, settings.fai_triangle_settings);
map.Get(ProfileKeys::EnableVarioBar,
settings.vario_bar_enabled);
Load(map, settings.trail);
Load(map, settings.item_list);
}示例4:
void
Profile::Load(const ProfileMap &map, MapItemListSettings &settings)
{
map.Get(ProfileKeys::EnableLocationMapItem, settings.add_location);
map.Get(ProfileKeys::EnableArrivalAltitudeMapItem, settings.add_arrival_altitude);
}