本文整理汇总了C++中Pipe::EndPt方法的典型用法代码示例。如果您正苦于以下问题：C++ Pipe::EndPt方法的具体用法？C++ Pipe::EndPt怎么用？C++ Pipe::EndPt使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类Pipe的用法示例。
在下文中一共展示了Pipe::EndPt方法的1个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: FindBaseCircle
BOOL CPFAOptimize::FindBaseCircle( ComponentManager& ComManager, Pipe& BasePipe, BaseCircleDirection Direction, ComMap& JunKeyMap, ComMap& PipeKeyMap, int iMostCircle[] )
{
//参数有效性判断
ASSERT( NULL != &ComManager );
ASSERT( NULL != &BasePipe );
ComAndCloseComs JunAndCloseJuns;
JunAndCenter CloseJuns; // 记录节点和节点位置的Vector，形式如(节点编号，节点位置)
Jun* pJun = NULL;
Component* pJunComponent = NULL;
Pipe* pPipe = NULL;
Component* pPipeComponent = NULL;
Jun* pPreJun = NULL;
Jun* pNextJun = NULL;
Jun* pStartJun = NULL;
Jun* pStartNextJun = NULL;
// 图形的上、左、右、下四个顶点的位置，为确定最大环做准备
int iTop = 2147483647; // 2的32次方减一
int iLeft = 2147483647;
int iRight = 0;
int iBotton = 0;
IteratorPtr<Component> JunItPtr( ComManager.CreatJunIterator() );
// 把节点和与节点相连的节点信息都放入JunAndCloseJuns
// 如节点1和节点3，4，5相连，则( 1, ( (3,节点3位置), (4，节点4位置), (5，节点5位置) ) )
// 然后把管道和与管道相连的管道编号放入PipeAndClosePipes
// 如管道1和管道3，4，5相连，则(1,(3,4,5))
for( JunItPtr->Fist(); !JunItPtr->IsDone(); JunItPtr->Next() )
{
CloseJuns.clear();
pJunComponent = &JunItPtr->CurrentItem();
pJun = dynamic_cast<Jun*>( pJunComponent );
IteratorPtr<Component> PipeItPtr( ComManager.CreatPipeIterator() );
for( PipeItPtr->Fist(); !PipeItPtr->IsDone(); PipeItPtr->Next() )
{
pPipeComponent = &PipeItPtr->CurrentItem();
pPipe = dynamic_cast<Pipe*>( pPipeComponent );
if( pPipe->StartJun() == pJun->GetKey() )
{
pair< int , CPoint > Temp( pPipe->EndJun(), pPipe->EndPt() );
CloseJuns.push_back( Temp );
}
if( pPipe->EndJun() == pJun->GetKey() )
{
pair< int , CPoint > Temp( pPipe->StartJun(), pPipe->StartPt() );
CloseJuns.push_back( Temp );
}
if( pPipe->GetKey() == BasePipe.GetKey() )
{
if ( DEASIL_DIRECTION == Direction )
{
pPreJun = ComManager.LookUpJun( pPipe->StartJun() );
pNextJun = ComManager.LookUpJun( pPipe->EndJun() );
}
else
{
pPreJun = ComManager.LookUpJun( pPipe->EndJun() );
pNextJun = ComManager.LookUpJun( pPipe->StartJun() );
}
}
}
JunAndCloseJuns.insert( ComAndCloseComs::value_type( pJun->GetKey(), CloseJuns ) );
// 确定四个顶点
if( iTop > pJun->CenterPt().y )
{
iTop = pJun->CenterPt().y;
iMostCircle[0] = pJun->GetKey();
}
if( iBotton < pJun->CenterPt().y )
{
iBotton = pJun->CenterPt().y;
iMostCircle[1] = pJun->GetKey();
}
if( iLeft > pJun->CenterPt().x )
{
iLeft = pJun->CenterPt().x;
iMostCircle[2] = pJun->GetKey();
}
if( iRight < pJun->CenterPt().x )
{
iRight = pJun->CenterPt().x;
iMostCircle[3] = pJun->GetKey();
}
}
JunItPtr->Fist();
pJunComponent = &JunItPtr->CurrentItem();
pJun = dynamic_cast<Jun*>( pJunComponent );
CloseJuns.clear();
ComAndCloseComs::iterator JunIt = JunAndCloseJuns.find( pJun->GetKey() );
CopyVector( CloseJuns, JunIt->second );
// 寻找环—节点矩阵
pStartJun = pPreJun;
pStartNextJun = pNextJun;
int iKeyOfChoiceJun = 0; // 用来标记哪个节点编号作为基环的下一节点编号
//.........这里部分代码省略.........