本文整理汇总了C++中PhysicsClientSharedMemory::canSubmitCommand方法的典型用法代码示例。如果您正苦于以下问题：C++ PhysicsClientSharedMemory::canSubmitCommand方法的具体用法？C++ PhysicsClientSharedMemory::canSubmitCommand怎么用？C++ PhysicsClientSharedMemory::canSubmitCommand使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类PhysicsClientSharedMemory的用法示例。
在下文中一共展示了PhysicsClientSharedMemory::canSubmitCommand方法的4个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: slider
void RobotControlExample::stepSimulation(float deltaTime)
{
m_physicsServer.processClientCommands();
if (m_physicsClient.isConnected())
{
SharedMemoryStatus status;
bool hasStatus = m_physicsClient.processServerStatus(status);
if (hasStatus && status.m_type == CMD_URDF_LOADING_COMPLETED)
{
for (int i=0;i<m_physicsClient.getNumJoints();i++)
{
b3JointInfo info;
m_physicsClient.getJointInfo(i,info);
b3Printf("Joint %s at q-index %d and u-index %d\n",info.m_jointName,info.m_qIndex,info.m_uIndex);
if (info.m_flags & JOINT_HAS_MOTORIZED_POWER)
{
if (m_numMotors<MAX_NUM_MOTORS)
{
char motorName[1024];
sprintf(motorName,"%s q'", info.m_jointName);
MyMotorInfo* motorInfo = &m_motorTargetVelocities[m_numMotors];
motorInfo->m_velTarget = 0.f;
motorInfo->m_uIndex = info.m_uIndex;
SliderParams slider(motorName,&motorInfo->m_velTarget);
slider.m_minVal=-4;
slider.m_maxVal=4;
m_guiHelper->getParameterInterface()->registerSliderFloatParameter(slider);
m_numMotors++;
}
}
}
}
if (m_physicsClient.canSubmitCommand())
{
if (m_userCommandRequests.size())
{
b3Printf("Outstanding user command requests: %d\n", m_userCommandRequests.size());
SharedMemoryCommand& cmd = m_userCommandRequests[0];
//a manual 'pop_front', we don't use 'remove' because it will re-order the commands
for (int i=1;i<m_userCommandRequests.size();i++)
{
m_userCommandRequests[i-1] = m_userCommandRequests[i];
}
m_userCommandRequests.pop_back();
m_physicsClient.submitClientCommand(cmd);
}
}
}
}示例2: slider
void PhysicsClientExample::stepSimulation(float deltaTime)
{
if (m_physicsClient.isConnected())
{
SharedMemoryStatus status;
bool hasStatus = m_physicsClient.processServerStatus(status);
if (hasStatus && status.m_type == CMD_URDF_LOADING_COMPLETED)
{
for (int i=0;i<m_physicsClient.getNumJoints();i++)
{
b3JointInfo info;
m_physicsClient.getJointInfo(i,info);
b3Printf("Joint %s at q-index %d and u-index %d\n",info.m_jointName,info.m_qIndex,info.m_uIndex);
}
if (hasStatus && status.m_type == CMD_URDF_LOADING_COMPLETED)
{
for (int i=0;i<m_physicsClient.getNumJoints();i++)
{
b3JointInfo info;
m_physicsClient.getJointInfo(i,info);
b3Printf("Joint %s at q-index %d and u-index %d\n",info.m_jointName,info.m_qIndex,info.m_uIndex);
if (info.m_flags & JOINT_HAS_MOTORIZED_POWER)
{
if (m_numMotors<MAX_NUM_MOTORS)
{
char motorName[1024];
sprintf(motorName,"%s q'", info.m_jointName);
MyMotorInfo2* motorInfo = &m_motorTargetVelocities[m_numMotors];
motorInfo->m_velTarget = 0.f;
motorInfo->m_uIndex = info.m_uIndex;
SliderParams slider(motorName,&motorInfo->m_velTarget);
slider.m_minVal=-4;
slider.m_maxVal=4;
m_guiHelper->getParameterInterface()->registerSliderFloatParameter(slider);
m_numMotors++;
}
}
}
}
}
if (hasStatus && status.m_type ==CMD_DEBUG_LINES_COMPLETED)
{
SharedMemoryCommand command;
if (status.m_sendDebugLinesArgs.m_numRemainingDebugLines>0)
{
//continue requesting debug lines for drawing
command.m_type =CMD_REQUEST_DEBUG_LINES;
command.m_requestDebugLinesArguments.m_debugMode = btIDebugDraw::DBG_DrawWireframe;//DBG_DrawConstraints;
command.m_requestDebugLinesArguments.m_startingLineIndex = status.m_sendDebugLinesArgs.m_numDebugLines+status.m_sendDebugLinesArgs.m_startingLineIndex;
enqueueCommand(command);
}
}
if (m_physicsClient.canSubmitCommand())
{
if (m_userCommandRequests.size())
{
//b3Printf("Outstanding user command requests: %d\n", m_userCommandRequests.size());
SharedMemoryCommand command = m_userCommandRequests[0];
//a manual 'pop_front', we don't use 'remove' because it will re-order the commands
for (int i=1;i<m_userCommandRequests.size();i++)
{
m_userCommandRequests[i-1] = m_userCommandRequests[i];
}
m_userCommandRequests.pop_back();
//for the CMD_RESET_SIMULATION we need to do something special: clear the GUI sliders
if (command.m_type==CMD_RESET_SIMULATION)
{
m_guiHelper->getParameterInterface()->removeAllParameters();
m_numMotors=0;
createButtons();
}
m_physicsClient.submitClientCommand(command);
} else
{
if (m_numMotors)
{
SharedMemoryCommand command;
command.m_type =CMD_SEND_DESIRED_STATE;
prepareControlCommand(command);
enqueueCommand(command);
command.m_type =CMD_STEP_FORWARD_SIMULATION;
enqueueCommand(command);
command.m_type = CMD_REQUEST_ACTUAL_STATE;
enqueueCommand(command);
}
}
//.........这里部分代码省略.........
示例3: slider
//.........这里部分代码省略.........
slider.m_maxVal=SIMD_PI;
m_guiHelper->getParameterInterface()->registerSliderFloatParameter(slider);
}
{
sprintf(motorName,"%s kd", info.m_jointName);
SliderParams slider(motorName,&motorInfo->m_kd);
slider.m_minVal=0;
slider.m_maxVal=1;
m_guiHelper->getParameterInterface()->registerSliderFloatParameter(slider);
}
{
sprintf(motorName,"%s q'", info.m_jointName);
SliderParams slider(motorName,&motorInfo->m_velTarget);
slider.m_minVal=-10;
slider.m_maxVal=10;
m_guiHelper->getParameterInterface()->registerSliderFloatParameter(slider);
}
m_numMotors++;
break;
}
default:
{
b3Warning("Unknown control mode in RobotControlExample::stepSimulation");
}
};
}
}
}
}
if (m_physicsClient.canSubmitCommand())
{
if (m_userCommandRequests.size())
{
if (m_verboseOutput)
{
b3Printf("Outstanding user command requests: %d\n", m_userCommandRequests.size());
}
SharedMemoryCommand cmd = m_userCommandRequests[0];
//a manual 'pop_front', we don't use 'remove' because it will re-order the commands
for (int i=1;i<m_userCommandRequests.size();i++)
{
m_userCommandRequests[i-1] = m_userCommandRequests[i];
}
m_userCommandRequests.pop_back();
if (cmd.m_type == CMD_SEND_BULLET_DATA_STREAM)
{
char relativeFileName[1024];
bool fileFound = b3ResourcePath::findResourcePath(cmd.m_dataStreamArguments.m_bulletFileName,relativeFileName,1024);
if (fileFound)
{
FILE *fp = fopen(relativeFileName, "rb");
if (fp)
{
fseek(fp, 0L, SEEK_END);
int mFileLen = ftell(fp);
fseek(fp, 0L, SEEK_SET);
if (mFileLen<SHARED_MEMORY_MAX_STREAM_CHUNK_SIZE)
{
char* data = (char*)malloc(mFileLen);示例4: slider
//.........这里部分代码省略.........
motorInfo->m_posIndex = info.m_qIndex;
motorInfo->m_jointIndex = jointIndex;
sensorCommand.m_createSensorArguments.m_jointIndex[sensorCommand.m_createSensorArguments.m_numJointSensorChanges] = jointIndex;
sensorCommand.m_createSensorArguments.m_enableJointForceSensor[sensorCommand.m_createSensorArguments.m_numJointSensorChanges] = true;
sensorCommand.m_createSensorArguments.m_numJointSensorChanges++;
m_numMotors++;
}
}
break;
}
default:
{
b3Warning("Unknown control mode in RobotControlExample::stepSimulation");
}
};
}
}
}
if (sensorCommand.m_createSensorArguments.m_numJointSensorChanges)
{
enqueueCommand(sensorCommand);
}
}
if (m_physicsClient.canSubmitCommand())
{
if (m_userCommandRequests.size())
{
if (m_verboseOutput)
{
b3Printf("Outstanding user command requests: %d\n", m_userCommandRequests.size());
}
SharedMemoryCommand cmd = m_userCommandRequests[0];
//a manual 'pop_front', we don't use 'remove' because it will re-order the commands
for (int i=1;i<m_userCommandRequests.size();i++)
{
m_userCommandRequests[i-1] = m_userCommandRequests[i];
}
m_userCommandRequests.pop_back();
if (cmd.m_type == CMD_CREATE_SENSOR)
{
b3Printf("CMD_CREATE_SENSOR!\n");
}
if (cmd.m_type == CMD_SEND_BULLET_DATA_STREAM)
{
char relativeFileName[1024];
bool fileFound = b3ResourcePath::findResourcePath(cmd.m_dataStreamArguments.m_bulletFileName,relativeFileName,1024);
if (fileFound)
{
FILE *fp = fopen(relativeFileName, "rb");
if (fp)
{
fseek(fp, 0L, SEEK_END);
int mFileLen = ftell(fp);