本文整理汇总了C++中PHTTP_BMO_REQ_OBJECT::GetState方法的典型用法代码示例。如果您正苦于以下问题：C++ PHTTP_BMO_REQ_OBJECT::GetState方法的具体用法？C++ PHTTP_BMO_REQ_OBJECT::GetState怎么用？C++ PHTTP_BMO_REQ_OBJECT::GetState使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类PHTTP_BMO_REQ_OBJECT的用法示例。
在下文中一共展示了PHTTP_BMO_REQ_OBJECT::GetState方法的4个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: AnscFreeBdo
ANSC_STATUS
HttpTroFinishedByClient
(
ANSC_HANDLE hThisObject,
PVOID buffer,
ULONG ulSize,
ANSC_HANDLE hBufferContext
)
{
ANSC_STATUS returnStatus = ANSC_STATUS_SUCCESS;
PHTTP_TRANS_RECORD_OBJECT pMyObject = (PHTTP_TRANS_RECORD_OBJECT )hThisObject;
PHTTP_ADVANCED_PROXY_OBJECT pAdvancedProxy = (PHTTP_ADVANCED_PROXY_OBJECT )pMyObject->hOwnerContext;
PHTTP_WAM_INTERFACE pWamIf = (PHTTP_WAM_INTERFACE )pMyObject->hWamIf;
PHTTP_SBC_INTERFACE pSbcIf = (PHTTP_SBC_INTERFACE )pMyObject->hSbcIf;
PANSC_DAEMON_SOCKET_TCP_OBJECT pClientSocket = (PANSC_DAEMON_SOCKET_TCP_OBJECT)pMyObject->hClientSocket;
PANSC_BROKER_SOCKET_TCP_OBJECT pServerSocket = (PANSC_BROKER_SOCKET_TCP_OBJECT)pMyObject->hServerSocket;
PHTTP_BMO_REQ_OBJECT pBmoReq = (PHTTP_BMO_REQ_OBJECT )pMyObject->hBmoReq;
PANSC_BUFFER_DESCRIPTOR pBufferDesp = (PANSC_BUFFER_DESCRIPTOR )hBufferContext;
ULONG ulBmoState = pBmoReq->GetState((ANSC_HANDLE)pBmoReq);
if ( (ulBmoState == HTTP_BMO_STATE_COMPLETE ) ||
(ulBmoState == HTTP_BMO_STATE_OVER_PACKED) )
{
if ( pBufferDesp )
{
AnscFreeBdo((ANSC_HANDLE)pBufferDesp);
}
return ANSC_STATUS_UNAPPLICABLE;
}
buffer = AnscBdoGetBlock (pBufferDesp);
ulSize = AnscBdoGetBlockSize(pBufferDesp);
returnStatus =
pBmoReq->CloseUp
(
(ANSC_HANDLE)pBmoReq,
(ANSC_HANDLE)pBufferDesp
);
return returnStatus;
}示例2: AnscFreeBdo
ANSC_STATUS
HttpWstoFinish
(
ANSC_HANDLE hThisObject,
PVOID buffer,
ULONG ulSize,
ANSC_HANDLE hBufferContext
)
{
ANSC_STATUS returnStatus = ANSC_STATUS_SUCCESS;
PHTTP_WEBS_TRANS_OBJECT pMyObject = (PHTTP_WEBS_TRANS_OBJECT )hThisObject;
PHTTP_SIMPLE_SERVER_OBJECT pSimpleServer = (PHTTP_SIMPLE_SERVER_OBJECT )pMyObject->hOwnerContext;
PHTTP_WSP_INTERFACE pWspIf = (PHTTP_WSP_INTERFACE )pMyObject->hWspIf;
PANSC_DAEMON_SOCKET_TCP_OBJECT pWebSocket = (PANSC_DAEMON_SOCKET_TCP_OBJECT)pMyObject->hWebSocket;
PHTTP_BMO_REQ_OBJECT pBmoReq = (PHTTP_BMO_REQ_OBJECT )pMyObject->hBmoReq;
PANSC_BUFFER_DESCRIPTOR pBufferDesp = (PANSC_BUFFER_DESCRIPTOR )hBufferContext;
ULONG ulBmoState = pBmoReq->GetState((ANSC_HANDLE)pBmoReq);
if ( (ulBmoState == HTTP_BMO_STATE_COMPLETE ) ||
(ulBmoState == HTTP_BMO_STATE_OVER_PACKED) )
{
if ( pBufferDesp )
{
AnscFreeBdo((ANSC_HANDLE)pBufferDesp);
}
return ANSC_STATUS_UNAPPLICABLE;
}
buffer = AnscBdoGetBlock (pBufferDesp);
ulSize = AnscBdoGetBlockSize(pBufferDesp);
returnStatus =
pBmoReq->CloseUp
(
(ANSC_HANDLE)pBmoReq,
(ANSC_HANDLE)pBufferDesp
);
return returnStatus;
}示例3: AnscBdoGetBlockSize
ULONG
HttpTroQueryForClient
(
ANSC_HANDLE hThisObject,
PVOID buffer,
ULONG ulSize,
ANSC_HANDLE hBufferContext
)
{
ANSC_STATUS returnStatus = ANSC_STATUS_SUCCESS;
PHTTP_TRANS_RECORD_OBJECT pMyObject = (PHTTP_TRANS_RECORD_OBJECT )hThisObject;
PHTTP_ADVANCED_PROXY_OBJECT pAdvancedProxy = (PHTTP_ADVANCED_PROXY_OBJECT )pMyObject->hOwnerContext;
PHTTP_WAM_INTERFACE pWamIf = (PHTTP_WAM_INTERFACE )pMyObject->hWamIf;
PHTTP_SBC_INTERFACE pSbcIf = (PHTTP_SBC_INTERFACE )pMyObject->hSbcIf;
PANSC_DAEMON_SOCKET_TCP_OBJECT pClientSocket = (PANSC_DAEMON_SOCKET_TCP_OBJECT)pMyObject->hClientSocket;
PANSC_BUFFER_DESCRIPTOR pBufferDesp = (PANSC_BUFFER_DESCRIPTOR )hBufferContext;
PHTTP_BMO_REQ_OBJECT pBmoReq = (PHTTP_BMO_REQ_OBJECT )pMyObject->hBmoReq;
ULONG ulTroQmode = HTTP_TRO_QMODE_FORWARD;
ULONG ulBmoState1 = HTTP_BMO_STATE_EMPTY;
ULONG ulBmoState2 = HTTP_BMO_STATE_EMPTY;
/*
* If the SBC (Server Behavior Controller) has allowed everything to be relayed internally by
* the proxy object itself (or simply because there's no SBC registered), we SHALL pass payload
* data from one socket to the other, whenever there's data available.
*/
if ( (pMyObject->TransState == HTTP_TRO_STATE_ESTABLISHED) &&
(pMyObject->SbcPmode == HTTP_SBC_PMODE_RELAY2 ) )
{
return HTTP_TRO_QMODE_FORWARD;
}
/*
* The decision on how to process the received payload should be made based on two message
* states: the message state before payload arrival and the state after. The caller must ensure
* the consistency of the buffer descriptor.
*/
buffer = AnscBdoGetBlock (pBufferDesp);
ulSize = AnscBdoGetBlockSize(pBufferDesp);
ulBmoState1 = pBmoReq->GetState((ANSC_HANDLE)pBmoReq);
ulBmoState2 =
pBmoReq->Examine
(
(ANSC_HANDLE)pBmoReq,
buffer,
ulSize
);
switch ( ulBmoState2 )
{
case HTTP_BMO_STATE_EMPTY :
case HTTP_BMO_STATE_PART_HEADER :
ulTroQmode = HTTP_TRO_QMODE_COLLECT;
break;
case HTTP_BMO_STATE_HEADER_ARRIVED :
ulTroQmode = HTTP_TRO_QMODE_PROCESS;
break;
case HTTP_BMO_STATE_PART_BODY :
if ( ulBmoState1 == HTTP_BMO_STATE_PART_BODY )
{
if ( AnscBdoGetLeftSize(pBufferDesp) > HTTP_SPO_RECV_BUFFER_ROOM )
{
ulTroQmode = HTTP_TRO_QMODE_COLLECT;
}
else
{
ulTroQmode = HTTP_TRO_QMODE_PROCESS;
}
}
else
{
ulTroQmode = HTTP_TRO_QMODE_PROCESS;
}
break;
case HTTP_BMO_STATE_COMPLETE :
case HTTP_BMO_STATE_OVER_PACKED :
ulTroQmode = HTTP_TRO_QMODE_PROCESS;
break;
case HTTP_BMO_STATE_UNKNOWN :
ulTroQmode = HTTP_TRO_QMODE_PROCESS;
break;
default :
ulTroQmode = HTTP_TRO_QMODE_COLLECT;
//.........这里部分代码省略.........
示例4: AnscBdoGetBlockSize
ULONG
HttpWstoQuery
(
ANSC_HANDLE hThisObject,
PVOID buffer,
ULONG ulSize,
ANSC_HANDLE hBufferContext
)
{
ANSC_STATUS returnStatus = ANSC_STATUS_SUCCESS;
PHTTP_WEBS_TRANS_OBJECT pMyObject = (PHTTP_WEBS_TRANS_OBJECT )hThisObject;
PHTTP_SIMPLE_SERVER_OBJECT pSimpleServer = (PHTTP_SIMPLE_SERVER_OBJECT )pMyObject->hOwnerContext;
PHTTP_WSP_INTERFACE pWspIf = (PHTTP_WSP_INTERFACE )pMyObject->hWspIf;
PANSC_DAEMON_SOCKET_TCP_OBJECT pWebSocket = (PANSC_DAEMON_SOCKET_TCP_OBJECT)pMyObject->hWebSocket;
PANSC_BUFFER_DESCRIPTOR pBufferDesp = (PANSC_BUFFER_DESCRIPTOR )hBufferContext;
PHTTP_BMO_REQ_OBJECT pBmoReq = (PHTTP_BMO_REQ_OBJECT )pMyObject->hBmoReq;
ULONG ulWstoQmode = HTTP_WSTO_QMODE_COLLECT;
ULONG ulBmoState1 = HTTP_BMO_STATE_EMPTY;
ULONG ulBmoState2 = HTTP_BMO_STATE_EMPTY;
/*
* The decision on how to process the received payload should be made based on two message
* states: the message state before payload arrival and the state after. The caller must ensure
* the consistency of the buffer descriptor.
*/
buffer = AnscBdoGetBlock (pBufferDesp);
ulSize = AnscBdoGetBlockSize(pBufferDesp);
ulBmoState1 = pBmoReq->GetState((ANSC_HANDLE)pBmoReq);
ulBmoState2 =
pBmoReq->Examine
(
(ANSC_HANDLE)pBmoReq,
buffer,
ulSize
);
switch ( ulBmoState2 )
{
case HTTP_BMO_STATE_EMPTY :
case HTTP_BMO_STATE_PART_HEADER :
ulWstoQmode = HTTP_WSTO_QMODE_COLLECT;
break;
case HTTP_BMO_STATE_HEADER_ARRIVED :
ulWstoQmode = HTTP_WSTO_QMODE_PROCESS;
break;
case HTTP_BMO_STATE_PART_BODY :
if ( ulBmoState1 == HTTP_BMO_STATE_PART_BODY )
{
if ( AnscBdoGetLeftSize(pBufferDesp) >= HTTP_SSO_RECV_BUFFER_ROOM )
{
ulWstoQmode = HTTP_WSTO_QMODE_COLLECT;
}
else
{
ulWstoQmode = HTTP_WSTO_QMODE_PROCESS;
}
}
else
{
ulWstoQmode = HTTP_WSTO_QMODE_PROCESS;
}
break;
case HTTP_BMO_STATE_COMPLETE :
case HTTP_BMO_STATE_OVER_PACKED :
ulWstoQmode = HTTP_WSTO_QMODE_PROCESS;
break;
case HTTP_BMO_STATE_UNKNOWN :
ulWstoQmode = HTTP_WSTO_QMODE_PROCESS;
break;
default :
ulWstoQmode = HTTP_WSTO_QMODE_COLLECT;
break;
}
return ulWstoQmode;
}