C++ MipsFunctionInfo::getGPStackOffset方法代码示例

void MipsFrameInfo::emitPrologue(MachineFunction &MF) const {
  MachineBasicBlock &MBB   = MF.front();
  MachineFrameInfo *MFI    = MF.getFrameInfo();
  MipsFunctionInfo *MipsFI = MF.getInfo<MipsFunctionInfo>();
  const MipsRegisterInfo *RegInfo =
    static_cast<const MipsRegisterInfo*>(MF.getTarget().getRegisterInfo());
  const MipsInstrInfo &TII =
    *static_cast<const MipsInstrInfo*>(MF.getTarget().getInstrInfo());
  MachineBasicBlock::iterator MBBI = MBB.begin();
  DebugLoc dl = MBBI != MBB.end() ? MBBI->getDebugLoc() : DebugLoc();
  bool isPIC = (MF.getTarget().getRelocationModel() == Reloc::PIC_);

  // Get the right frame order for Mips.
  adjustMipsStackFrame(MF);

  // Get the number of bytes to allocate from the FrameInfo.
  unsigned StackSize = MFI->getStackSize();

  // No need to allocate space on the stack.
  if (StackSize == 0 && !MFI->adjustsStack()) return;

  int FPOffset = MipsFI->getFPStackOffset();
  int RAOffset = MipsFI->getRAStackOffset();

  BuildMI(MBB, MBBI, dl, TII.get(Mips::NOREORDER));

  // TODO: check need from GP here.
  if (isPIC && STI.isABI_O32())
    BuildMI(MBB, MBBI, dl, TII.get(Mips::CPLOAD))
      .addReg(RegInfo->getPICCallReg());
  BuildMI(MBB, MBBI, dl, TII.get(Mips::NOMACRO));

  // Adjust stack : addi sp, sp, (-imm)
  BuildMI(MBB, MBBI, dl, TII.get(Mips::ADDiu), Mips::SP)
      .addReg(Mips::SP).addImm(-StackSize);

  // Save the return address only if the function isnt a leaf one.
  // sw  $ra, stack_loc($sp)
  if (MFI->adjustsStack()) {
    BuildMI(MBB, MBBI, dl, TII.get(Mips::SW))
        .addReg(Mips::RA).addImm(RAOffset).addReg(Mips::SP);
  }

  // if framepointer enabled, save it and set it
  // to point to the stack pointer
  if (hasFP(MF)) {
    // sw  $fp,stack_loc($sp)
    BuildMI(MBB, MBBI, dl, TII.get(Mips::SW))
      .addReg(Mips::FP).addImm(FPOffset).addReg(Mips::SP);

    // move $fp, $sp
    BuildMI(MBB, MBBI, dl, TII.get(Mips::ADDu), Mips::FP)
      .addReg(Mips::SP).addReg(Mips::ZERO);
  }

  // Restore GP from the saved stack location
  if (MipsFI->needGPSaveRestore())
    BuildMI(MBB, MBBI, dl, TII.get(Mips::CPRESTORE))
      .addImm(MipsFI->getGPStackOffset());
}

void MipsRegisterInfo::
processFunctionBeforeFrameFinalized(MachineFunction &MF) const {
  // Set the stack offset where GP must be saved/loaded from.
  MachineFrameInfo *MFI = MF.getFrameInfo();
  MipsFunctionInfo *MipsFI = MF.getInfo<MipsFunctionInfo>();
  if (MipsFI->needGPSaveRestore())
    MFI->setObjectOffset(MipsFI->getGPFI(), MipsFI->getGPStackOffset());
}

void MipsFrameInfo::adjustMipsStackFrame(MachineFunction &MF) const {
  MachineFrameInfo *MFI = MF.getFrameInfo();
  MipsFunctionInfo *MipsFI = MF.getInfo<MipsFunctionInfo>();
  const std::vector<CalleeSavedInfo> &CSI = MFI->getCalleeSavedInfo();
  unsigned StackAlign = MF.getTarget().getFrameInfo()->getStackAlignment();
  unsigned RegSize = STI.isGP32bit() ? 4 : 8;
  bool HasGP = MipsFI->needGPSaveRestore();

  // Min and Max CSI FrameIndex.
  int MinCSFI = -1, MaxCSFI = -1;

  // See the description at MipsMachineFunction.h
  int TopCPUSavedRegOff = -1, TopFPUSavedRegOff = -1;

  // Replace the dummy '0' SPOffset by the negative offsets, as explained on
  // LowerFormalArguments. Leaving '0' for while is necessary to avoid the
  // approach done by calculateFrameObjectOffsets to the stack frame.
  MipsFI->adjustLoadArgsFI(MFI);
  MipsFI->adjustStoreVarArgsFI(MFI);

  // It happens that the default stack frame allocation order does not directly
  // map to the convention used for mips. So we must fix it. We move the callee
  // save register slots after the local variables area, as described in the
  // stack frame above.
  unsigned CalleeSavedAreaSize = 0;
  if (!CSI.empty()) {
    MinCSFI = CSI[0].getFrameIdx();
    MaxCSFI = CSI[CSI.size()-1].getFrameIdx();
  }
  for (unsigned i = 0, e = CSI.size(); i != e; ++i)
    CalleeSavedAreaSize += MFI->getObjectAlignment(CSI[i].getFrameIdx());

  unsigned StackOffset = HasGP ? (MipsFI->getGPStackOffset()+RegSize)
                : (STI.isABI_O32() ? 16 : 0);

  // Adjust local variables. They should come on the stack right
  // after the arguments.
  int LastOffsetFI = -1;
  for (int i = 0, e = MFI->getObjectIndexEnd(); i != e; ++i) {
    if (i >= MinCSFI && i <= MaxCSFI)
      continue;
    if (MFI->isDeadObjectIndex(i))
      continue;
    unsigned Offset =
      StackOffset + MFI->getObjectOffset(i) - CalleeSavedAreaSize;
    if (LastOffsetFI == -1)
      LastOffsetFI = i;
    if (Offset > MFI->getObjectOffset(LastOffsetFI))
      LastOffsetFI = i;
    MFI->setObjectOffset(i, Offset);
  }

  // Adjust CPU Callee Saved Registers Area. Registers RA and FP must
  // be saved in this CPU Area. This whole area must be aligned to the
  // default Stack Alignment requirements.
  if (LastOffsetFI >= 0)
    StackOffset = MFI->getObjectOffset(LastOffsetFI)+
                  MFI->getObjectSize(LastOffsetFI);
  StackOffset = ((StackOffset+StackAlign-1)/StackAlign*StackAlign);

  for (unsigned i = 0, e = CSI.size(); i != e ; ++i) {
    unsigned Reg = CSI[i].getReg();
    if (!Mips::CPURegsRegisterClass->contains(Reg))
      break;
    MFI->setObjectOffset(CSI[i].getFrameIdx(), StackOffset);
    TopCPUSavedRegOff = StackOffset;
    StackOffset += MFI->getObjectAlignment(CSI[i].getFrameIdx());
  }

  // Stack locations for FP and RA. If only one of them is used,
  // the space must be allocated for both, otherwise no space at all.
  if (hasFP(MF) || MFI->adjustsStack()) {
    // FP stack location
    MFI->setObjectOffset(MFI->CreateStackObject(RegSize, RegSize, true),
                         StackOffset);
    MipsFI->setFPStackOffset(StackOffset);
    TopCPUSavedRegOff = StackOffset;
    StackOffset += RegSize;

    // SP stack location
    MFI->setObjectOffset(MFI->CreateStackObject(RegSize, RegSize, true),
                         StackOffset);
    MipsFI->setRAStackOffset(StackOffset);
    StackOffset += RegSize;

    if (MFI->adjustsStack())
      TopCPUSavedRegOff += RegSize;
  }

  StackOffset = ((StackOffset+StackAlign-1)/StackAlign*StackAlign);

  // Adjust FPU Callee Saved Registers Area. This Area must be
  // aligned to the default Stack Alignment requirements.
  for (unsigned i = 0, e = CSI.size(); i != e; ++i) {
    unsigned Reg = CSI[i].getReg();
    if (Mips::CPURegsRegisterClass->contains(Reg))
      continue;
    MFI->setObjectOffset(CSI[i].getFrameIdx(), StackOffset);
    TopFPUSavedRegOff = StackOffset;
    StackOffset += MFI->getObjectAlignment(CSI[i].getFrameIdx());
//.........这里部分代码省略.........