本文整理汇总了C++中MetadataInfo::SetAuthor方法的典型用法代码示例。如果您正苦于以下问题：C++ MetadataInfo::SetAuthor方法的具体用法？C++ MetadataInfo::SetAuthor怎么用？C++ MetadataInfo::SetAuthor使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类MetadataInfo的用法示例。
在下文中一共展示了MetadataInfo::SetAuthor方法的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: MetadataInformation
/// function to return the XML Metadata document string
extern "C" SEIMS_MODULE_API const char* MetadataInformation()
{
MetadataInfo mdi;
string res;
mdi.SetAuthor("Zhiqiang Yu");
mdi.SetClass(MCLS_CLIMATE,MCLSDESC_CLIMATE);
mdi.SetDescription(MDESC_TSD_RD);
mdi.SetID(MID_TSD_RD);
mdi.SetName(MID_TSD_RD);
mdi.SetVersion("1.0");
mdi.SetEmail(SEIMS_EMAIL);
mdi.SetWebsite(SEIMS_SITE);
mdi.SetHelpfile("");
mdi.AddParameter(VAR_TSD_DT,UNIT_NON_DIM,DESC_TSD_DT,File_Config,DT_Single);
/// set the input variables (time series), and T means time series. D means distribution.
mdi.AddInput(DataType_Prefix_TS,UNIT_NON_DIM, DESC_TSD_CLIMATE, Source_HydroClimateDB, DT_Array1D);
/// set the output variables
mdi.AddOutput(DataType_Prefix_TS,UNIT_NON_DIM, DESC_TSD_CLIMATE, DT_Array1D);
/// write out the XML file.
res = mdi.GetXMLDocument();
char* tmp = new char[res.size()+1];
strprintf(tmp, res.size()+1, "%s", res.c_str());
return tmp;
}示例2: MetadataInformation
extern "C" SEIMS_MODULE_API const char* MetadataInformation() {
MetadataInfo mdi;
// set the information properties
mdi.SetAuthor("Junzhi Liu, Liangjun Zhu");
mdi.SetClass(MCLS_OL_ROUTING, MCLSDESC_OL_ROUTING);
mdi.SetDescription(MDESC_IUH_SED_OL);
mdi.SetEmail(SEIMS_EMAIL);
mdi.SetHelpfile("");
mdi.SetID(MID_IUH_SED_OL);
mdi.SetName(MID_IUH_SED_OL);
mdi.SetVersion("1.2");
mdi.SetWebsite(SEIMS_SITE);
mdi.AddParameter(Tag_TimeStep, UNIT_HOUR, DESC_TIMESTEP, File_Input, DT_Single);
mdi.AddParameter(Tag_CellWidth, UNIT_LEN_M, DESC_CellWidth, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_SUBBSNID_NUM, UNIT_NON_DIM, DESC_SUBBSNID_NUM, Source_ParameterDB, DT_Single);
mdi.AddParameter(Tag_SubbasinId, UNIT_NON_DIM, Tag_SubbasinId, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_OL_IUH, UNIT_NON_DIM, DESC_OL_IUH, Source_ParameterDB, DT_Array2D);
mdi.AddParameter(VAR_SUBBSN, UNIT_NON_DIM, DESC_SUBBSN, Source_ParameterDB, DT_Raster1D);
mdi.AddInput(VAR_SOER, UNIT_KG, DESC_SOER, Source_Module, DT_Raster1D);
mdi.AddOutput(VAR_SED_TO_CH, UNIT_KG, DESC_SED_TO_CH, DT_Array1D, TF_SingleValue);
mdi.AddOutput(VAR_SEDYLD, UNIT_KG, DESC_SEDYLD, DT_Raster1D);
// write out the XML file.
string res = mdi.GetXMLDocument();
char* tmp = new char[res.size() + 1];
strprintf(tmp, res.size() + 1, "%s", res.c_str());
return tmp;
}示例3: MetadataInformation
/// function to return the XML Metadata document string
extern "C" SEIMS_MODULE_API const char* MetadataInformation()
{
MetadataInfo mdi;
string res;
mdi.SetAuthor("LiangJun Zhu");
mdi.SetClass("TEST", "Base functionality test!");
mdi.SetDescription("Module test.");
mdi.SetID("IO_TEST");
mdi.SetName("IO_TEST");
mdi.SetVersion("1.0");
mdi.SetEmail(SEIMS_EMAIL);
mdi.SetWebsite(SEIMS_SITE);
mdi.SetHelpfile("");
mdi.AddParameter(VAR_CN2, UNIT_NON_DIM, DESC_CN2, Source_ParameterDB, DT_Raster1D);
mdi.AddParameter(VAR_CONDUCT, UNIT_WTRDLT_MMH, DESC_CONDUCT, Source_ParameterDB, DT_Raster2D);
/// set the output variables
mdi.AddOutput("CN2_M",UNIT_NON_DIM, DESC_CN2, DT_Raster1D);
mdi.AddOutput("K_M",UNIT_WTRDLT_MMH,DESC_CONDUCT,DT_Raster2D);
/// write out the XML file.
res = mdi.GetXMLDocument();
char* tmp = new char[res.size()+1];
strprintf(tmp, res.size()+1, "%s", res.c_str());
return tmp;
}示例4: strprintf
// function to return the XML Metadata document string
//Set up metadata information
extern "C" SEIMS_MODULE_API const char *MetadataInformation()
{
string res;
MetadataInfo mdi;
// set the information properties
mdi.SetAuthor("Hui Wu");
mdi.SetClass(MCLS_CH_EROSION, MCLSDESC_CH_EROSION);
mdi.SetDescription(MDESC_KINWAVSED_CH);
mdi.SetEmail(SEIMS_EMAIL);
mdi.SetID(MID_KINWAVSED_CH);
mdi.SetName(MID_KINWAVSED_CH);
mdi.SetVersion("0.5");
mdi.SetWebsite(SEIMS_SITE);
mdi.SetHelpfile("KinWavSed_CH.chm");
mdi.AddParameter(Tag_CellSize, UNIT_NON_DIM, DESC_CellSize, Source_ParameterDB, DT_Single);
mdi.AddParameter(Tag_CellWidth, UNIT_LEN_M, DESC_CellWidth, Source_ParameterDB, DT_Single);
mdi.AddParameter(Tag_HillSlopeTimeStep, UNIT_SECOND, DESC_DT_HS, File_Input, DT_Single);
mdi.AddParameter(VAR_CH_TCCO, UNIT_NON_DIM, DESC_CH_TCCO, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_CH_DETCO, UNIT_NON_DIM, DESC_CH_DETCO, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_CHWIDTH, UNIT_LEN_M, DESC_CHWIDTH, Source_ParameterDB, DT_Raster1D);
mdi.AddParameter(VAR_SLOPE, UNIT_PERCENT, DESC_SLOPE, Source_ParameterDB, DT_Raster1D);
mdi.AddParameter(VAR_STREAM_LINK, UNIT_NON_DIM, DESC_STREAM_LINK, Source_ParameterDB, DT_Raster1D);
mdi.AddParameter(VAR_USLE_K, UNIT_NON_DIM, DESC_USLE_K, Source_ParameterDB, DT_Raster1D);
mdi.AddParameter(Tag_FLOWOUT_INDEX_D8, UNIT_NON_DIM, DESC_FLOWOUT_INDEX_D8, Source_ParameterDB, DT_Array1D);
mdi.AddParameter(Tag_FLOWIN_INDEX_D8, UNIT_NON_DIM, DESC_FLOWIN_INDEX_D8, Source_ParameterDB, DT_Array2D);
mdi.AddParameter(Tag_ReachParameter, UNIT_NON_DIM, DESC_REACH_PARAM, Source_ParameterDB, DT_Array2D);
// input from other module
mdi.AddInput(VAR_SED_TO_CH, UNIT_KG, DESC_SED_TO_CH, Source_Module, DT_Raster1D);
mdi.AddInput(VAR_HCH, UNIT_DEPTH_MM, DESC_HCH, Source_Module, DT_Array2D);
//mdi.AddInput(VAR_QRECH, UNIT_FLOW_CMS, DESC_QRECH, Source_Module,DT_Array2D);
mdi.AddInput("QRECH", "m3/s", "Flux in the downslope boundary of cells", "Module",
DT_Array2D);// from which module? By LJ
/// set the output variables
mdi.AddOutput(VAR_SED_OUTLET, UNIT_KGM3, DESC_SED_OUTLET, DT_Single);
mdi.AddOutput(VAR_CH_DEP, UNIT_KG, DESC_CH_DEP, DT_Raster1D);
mdi.AddOutput(VAR_CH_DET, UNIT_KG, DESC_CH_DET, DT_Raster1D);
mdi.AddOutput(VAR_CH_SEDRATE, UNIT_KG_S, DESC_CH_SEDRATE, DT_Raster1D);
mdi.AddOutput(VAR_CH_FLOWCAP, UNIT_KG, DESC_CH_FLOWCAP, DT_Raster1D);
mdi.AddOutput(VAR_CH_VOL, UNIT_VOL_M3, DESC_CH_VOL, DT_Raster1D);
mdi.AddOutput(VAR_CH_V, UNIT_SPEED_MS, DESC_CH_V, DT_Raster1D);
mdi.AddDependency(MCLS_OL_EROSION, MCLSDESC_OL_EROSION);
mdi.AddDependency(MCLS_CH_ROUTING, MCLSDESC_CH_ROUTING);
// write out the XML file.
res = mdi.GetXMLDocument();
//return res;
char *tmp = new char[res.size() + 1];
strprintf(tmp, res.size() + 1, "%s", res.c_str());
return tmp;
}示例5: strprintf
// function to return the XML Metadata document string
extern "C" SEIMS_MODULE_API const char *MetadataInformation()
{
string res = "";
MetadataInfo mdi;
// set the information properties
mdi.SetAuthor("Liu Junzhi");
mdi.SetClass("Channelflow", "channel flow routing using kinermatic wave method.");
mdi.SetDescription("channel flow routing using variable storage method.");
mdi.SetEmail(SEIMS_EMAIL);
mdi.SetHelpfile("IKW_REACH.chm");
mdi.SetID("IKW_REACH");
mdi.SetName("MUSK_CH");
mdi.SetVersion("0.1");
mdi.SetWebsite(SEIMS_SITE);
mdi.AddParameter(Tag_ChannelTimeStep, UNIT_SECOND, DESC_TIMESTEP, File_Input, DT_Single);
mdi.AddParameter(VAR_K_CHB, UNIT_WTRDLT_MMH, DESC_K_CHB, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_K_BANK, UNIT_WTRDLT_MMH, DESC_K_BANK, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_EP_CH, UNIT_WTRDLT_MMH, DESC_EP_CH, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_BNK0, UNIT_STRG_M3M, DESC_BNK0, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_CHS0, UNIT_STRG_M3M, DESC_CHS0, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_VSEEP0, UNIT_FLOW_CMS, DESC_VSEEP0, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_A_BNK, UNIT_NON_DIM, DESC_A_BNK, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_B_BNK, UNIT_NON_DIM, DESC_B_BNK, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_MSK_X, UNIT_NON_DIM, DESC_MSK_X, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_MSK_CO1, UNIT_NON_DIM, DESC_MSK_CO1, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_QUPREACH, UNIT_NON_DIM, DESC_QUPREACH, Source_ParameterDB, DT_Single);
//mdi.AddParameter(VAR_MSF, UNIT_NON_DIM, DESC_MSF, Source_ParameterDB, DT_Single);
mdi.AddParameter(Tag_RchParam, UNIT_NON_DIM, DESC_REACH_PARAM, Source_ParameterDB, DT_Array2D);
//mdi.AddParameter(VAR_VDIV, UNIT_VOL_M3, DESC_VDIV, DT_Array1D);
//mdi.AddParameter(VAR_VPOINT, UNIT_VOL_M3, DESC_VPOINT, "diversionloss.txt", DT_Array1D);
mdi.AddParameter(VAR_SUBBSN, UNIT_NON_DIM, DESC_SUBBSN, Source_ParameterDB, DT_Raster1D);
mdi.AddInput(VAR_SBOF, UNIT_FLOW_CMS, DESC_SBOF, Source_Module, DT_Array1D);
mdi.AddInput(VAR_SBIF, UNIT_FLOW_CMS, DESC_SBIF, Source_Module, DT_Array1D);
mdi.AddInput(VAR_SBQG, UNIT_FLOW_CMS, DESC_SBQG, Source_Module, DT_Array1D);
mdi.AddInput(VAR_SBPET, UNIT_DEPTH_MM, DESC_SBPET, Source_Module, DT_Array1D);
mdi.AddInput(VAR_SBGS, UNIT_DEPTH_MM, DESC_SBGS, Source_Module, DT_Array1D);
mdi.AddOutput(VAR_QRECH, UNIT_FLOW_CMS, DESC_QRECH, DT_Array1D);
mdi.AddOutput(VAR_QOUTLET, UNIT_FLOW_CMS, DESC_QOUTLET, DT_Single);
mdi.AddOutput(VAR_QS, UNIT_FLOW_CMS, DESC_QS, DT_Array1D);
mdi.AddOutput(VAR_QSOUTLET, UNIT_FLOW_CMS, DESC_QSOUTLET, DT_Single);
mdi.AddOutput(VAR_QI, UNIT_FLOW_CMS, DESC_QI, DT_Array1D);
mdi.AddOutput(VAR_QG, UNIT_FLOW_CMS, DESC_QG, DT_Array1D);
mdi.AddOutput(VAR_CHST, UNIT_VOL_M3, DESC_CHST, DT_Array1D);
mdi.AddOutput(VAR_BKST, UNIT_VOL_M3, DESC_BKST, DT_Array1D);
mdi.AddOutput(VAR_SEEPAGE, UNIT_VOL_M3, DESC_SEEPAGE, DT_Array1D);
mdi.AddOutput(VAR_CHWTDEPTH, UNIT_LEN_M, DESC_CHWTDEPTH, DT_Array1D);
//mdi.AddOutput(VAR_C_WABA, UNIT_NON_DIM, DESC_C_WABA, DT_Array2D);
res = mdi.GetXMLDocument();
char *tmp = new char[res.size() + 1];
strprintf(tmp, res.size() + 1, "%s", res.c_str());
return tmp;
}示例6: MetadataInformation
// function to return the XML Metadata document string
extern "C" SEIMS_MODULE_API const char* MetadataInformation()
{
MetadataInfo mdi;
// set the information properties
mdi.SetAuthor("Junzhi Liu");
mdi.SetClass("Soil Temperature", "Calculate the soil temperature.");
mdi.SetDescription("Finn Plauborg Method to compute soil temperature.");
mdi.SetEmail("[email protected]");
mdi.SetID("STP_FP");
mdi.SetName("STP_FP");
mdi.SetVersion("0.5");
mdi.SetWebsite("http://seims.github.io/SEIMS");
mdi.SetHelpfile("STP_FP.html");
/// from parameter database
mdi.AddParameter("soil_ta0","","Coefficient a0 for Finn Plauborg Method",
"ParameterDB_WaterBalance", DT_Single);
mdi.AddParameter("soil_ta1","","Coefficient a1 for Finn Plauborg Method",
"ParameterDB_WaterBalance", DT_Single);
mdi.AddParameter("soil_ta2","","Coefficient a2 for Finn Plauborg Method",
"ParameterDB_WaterBalance", DT_Single);
mdi.AddParameter("soil_ta3","","Coefficient a3 for Finn Plauborg Method",
"ParameterDB_WaterBalance", DT_Single);
mdi.AddParameter("soil_tb1","","Coefficient b1 for Finn Plauborg Method",
"ParameterDB_WaterBalance", DT_Single);
mdi.AddParameter("soil_tb2","","Coefficient b2 for Finn Plauborg Method",
"ParameterDB_WaterBalance", DT_Single);
mdi.AddParameter("soil_td1","","Coefficient d1 for Finn Plauborg Method",
"ParameterDB_WaterBalance", DT_Single);
mdi.AddParameter("soil_td2","","Coefficient d2 for Finn Plauborg Method",
"ParameterDB_WaterBalance", DT_Single);
mdi.AddParameter("k_soil10","","Ratio between soil temperature at 10 cm and the mean",
"ParameterDB_WaterBalance", DT_Single);
mdi.AddParameter("soil_t10","","Factor of soil temperature relative to short grass (degree)",
"ParameterDB_WaterBalance", DT_Raster);
//mdi.AddParameter("Mask", "", "Array containing the row and column numbers for valid cells",
// "ParameterDB_WaterBalance", DT_Raster);
/// from interpolation module
/// air temperature
mdi.AddInput("D_Tmin","oC","Minimum air temperature","Module", DT_Raster);
mdi.AddInput("D_Tmax","oC","Maximum air temperature","Module", DT_Raster);
//mdi.AddInput("Tmin1","oC","Minimum air temperature of the (d-1)th day","Module", DT_Raster);
//mdi.AddInput("Tmax1","oC","Maximum air temperature of the (d-1)th day","Module", DT_Raster);
//mdi.AddInput("Tmin2","oC","Minimum air temperature of the (d-2)th day","Module", DT_Raster);
//mdi.AddInput("Tmax2","oC","Maximum air temperature of the (d-2)th day","Module", DT_Raster);
/// output soil temperature
mdi.AddOutput("SOTE","oC", "Soil Temperature", DT_Raster);
string res = mdi.GetXMLDocument();
char* tmp = new char[res.size()+1];
strprintf(tmp, res.size()+1, "%s", res.c_str());
return tmp;
}示例7: MetadataInformation
// function to return the XML Metadata document string
extern "C" SEIMS_MODULE_API const char* MetadataInformation()
{
string res;
MetadataInfo mdi;
// set the information properties
mdi.SetAuthor("Hui Wu");
mdi.SetClass("Splash Erosion", "Calculate the amount soil detachment erosion.");
mdi.SetDescription("use Park equation to calculate sediment yield of each cell");
mdi.SetEmail("[email protected]");
mdi.SetID("SplashEro_Park");
mdi.SetName("SplashEro_Park");
mdi.SetVersion("0.5");
mdi.SetWebsite("http://seims.github.io/SEIMS");
mdi.SetHelpfile("SplashEro_Park.chm");
mdi.AddParameter("cellwidth","m","the width (length) of cell","mask.asc",DT_Single);
mdi.AddParameter("DT_HS", "second", "Time step of the simulation", "file.in", DT_Single);
mdi.AddParameter("Omega","","calibration coefficient of splash erosion","ParameterDB_Sediment",DT_Single);
mdi.AddParameter("USLE_K","","the soil erodibility factor","ParameterDB_Sediment",DT_Raster);
mdi.AddParameter("USLE_C","","the cover management factor","ParameterDB_Sediment",DT_Raster);
//mdi.AddParameter("Hplant","m","the height of the plants","ParameterDB_Sediment",DT_Raster);
//mdi.AddParameter("GRAD","","slope gradient (sine of slope angle)","ParameterDB_WaterBalance",DT_Raster);
mdi.AddParameter("Slope", "%", "Slope", "ParameterDB_WaterBalance", DT_Raster);
//mdi.AddParameter("StoneFrac","","the fraction of stones on the surface, affects splash","ParameterDB_Sediment",DT_Raster);
//mdi.AddParameter("GrassFrac","","the fraction of grasstrip in a cell","ParameterDB_Sediment",DT_Raster);
//mdi.AddParameter("CoverFrac","","the fraction of vegetation cover","ParameterDB_Interception",DT_Raster);
//mdi.AddParameter("RandRough","cm","The random roughness","ParameterDB_Sediment",DT_Raster);
//mdi.AddParameter("CHWIDTH", "m", "channel width", "ParameterDB_Discharge", DT_Raster);
//input from other module
//WaterDepth = Depression + SurfaceRunoffDepth
mdi.AddInput("D_DPST","mm","The depression storage","Module",DT_Raster);
mdi.AddInput("D_SURU","mm","surface runoff","Module",DT_Raster);
mdi.AddInput("D_QOverland","m3/s","Water discharge in the downslope boundary of cells","Module",DT_Raster);
//mdi.AddInput("D_SNAC","mm","snow accumulation","Module",DT_Raster); //SnowCover, from snow water balance module
mdi.AddInput("D_NEPR","mm","The net precipitation obtained from the interception module","Module",DT_Raster); //Rain, from interception module
//mdi.AddInput("D_LeafDrain","m","leaf drainage from canopy","Module",DT_Raster); //from Interception module
// set the output variables
mdi.AddOutput("DETSplash","kg", "distribution of splash detachment", DT_Raster);
mdi.AddDependency("Interception","Interception module"); //for pNet, Leafdrain
mdi.AddDependency("Overland routing","Overland routing module"); // cellh
//mdi.AddDependency("Depression","Depression storage module"); // suru
// write out the XML file.
res = mdi.GetXMLDocument();
//return res;
char* tmp = new char[res.size()+1];
strprintf(tmp, res.size()+1, "%s", res.c_str());
return tmp;
}示例8: link
// function to return the XML Metadata document string
extern "C" SEIMS_MODULE_API const char *MetadataInformation()
{
string res = "";
MetadataInfo mdi;
// set the information properties
mdi.SetAuthor("Wang Lin");
mdi.SetClass("Dissolved Nutrient CH", "Channel Dissolved Nutrient.");
mdi.SetDescription("Dissolved Nutrient Channel transport method using KinematicWave Method.");
mdi.SetEmail(SEIMS_EMAIL);
mdi.SetHelpfile("DissolvedNutrient_CH.chm");
mdi.SetID("DissolvedNutrient_CH");
mdi.SetName("DissolvedNutrient_CH");
mdi.SetVersion("0.1");
mdi.SetWebsite(SEIMS_SITE);
mdi.AddParameter("DT_HS", "second", "Time step of the simulation", "file.in", DT_Single);
mdi.AddParameter(Tag_CellSize, UNIT_NON_DIM, DESC_CellSize, Source_ParameterDB, DT_Single);
mdi.AddParameter(Tag_CellWidth, UNIT_LEN_M, DESC_CellWidth, Source_ParameterDB, DT_Single);
mdi.AddParameter("Slope", "%", "Slope", "ParameterDB_WaterBalance", DT_Raster1D);
mdi.AddParameter("CHWIDTH", "m", "Channel width", "ParameterDB_Discharge", DT_Raster1D);
mdi.AddParameter("FLOWOUT_INDEX_D8", "", "The index of flow in cell in the compressed array",
"ParameterDB_Discharge", DT_Array1D);
mdi.AddParameter("FLOWIN_INDEX_D8", "", "The index of flow in cell in the compressed array,"
" and the first element in each sub-array is the number of flow in cells in this sub-array",
"ParameterDB_Discharge", DT_Array2D);
mdi.AddParameter("STREAM_LINK", "", "Stream link (id of reaches)", "ParameterDB_Discharge", DT_Raster1D);
mdi.AddParameter(Tag_ReachParameter, UNIT_NON_DIM, DESC_REACH_PARAMETER, Source_ParameterDB, DT_Array2D);
mdi.AddInput("D_DissovPToCh", "m3/s", "Flux in the downslope boundary of cells", "Module", DT_Raster1D);
mdi.AddInput("D_AmmoniumToCh", "mm", "Water depth in the downslope boundary of cells", "Module", DT_Raster1D);
mdi.AddInput("D_NitrateToCh", "mm", "Infiltration map of watershed", "Module", DT_Raster1D);
mdi.AddInput("HCH", "mm", "Water depth in the downslope boundary of cells", "Module", DT_Array2D);
mdi.AddInput("QCH", "m3/s", "Flux in the downslope boundary of cells", "Module", DT_Array2D);
mdi.AddOutput("DissovP", "kg/s", "distribution of dissovlved P in reaches", DT_Array2D);
mdi.AddOutput("Ammonium", "kg/s", "distribution of nutrient, ammonium in reaches", DT_Array2D);
mdi.AddOutput("Nitrate", "kg/s", "distribution of nutrient, nitrate in reaches", DT_Array2D);
mdi.AddOutput("DissovPOutlet", "mg/s", "dissovlved P flows to outlet", DT_Single);
mdi.AddOutput("AmmoniumOutlet", "mg/s", "ammonium flows to outlet", DT_Single);
mdi.AddOutput("NitrateOutlet", "mg/s", "nitrate flows to outlet", DT_Single);
// set the dependencies
mdi.AddDependency("Dissolved Nutrient OL", "Dissolved Nutrient Overland module"); //for WH
mdi.AddDependency("Channel routing", "Channel routing module");
// write out the XML file.
res = mdi.GetXMLDocument();
char *tmp = new char[res.size() + 1];
strprintf(tmp, res.size() + 1, "%s", res.c_str());
return tmp;
}示例9: MetadataInformation
// function to return the XML Metadata document string
extern "C" SEIMS_MODULE_API const char* MetadataInformation()
{
MetadataInfo mdi;
// set the information properties
mdi.SetAuthor("Chunping Ou");
mdi.SetClass(MCLS_SNO_RD, MCLSDESC_SNO_RD);
mdi.SetDescription(MDESC_SRD_MB);
mdi.SetEmail(SEIMS_EMAIL);
mdi.SetID(MID_SRD_MB);
mdi.SetName(MID_SRD_MB);
mdi.SetVersion("0.5");
mdi.SetWebsite(SEIMS_SITE);
mdi.SetHelpfile("SRD_MB.chm");
//3 grid parameter
mdi.AddParameter("slope_wind","%","Slope along wind direction","ParameterDB_Snow",DT_Raster1D);
mdi.AddParameter("curva_wind","%","curvature along wind direction","ParameterDB_Snow",DT_Raster1D);
mdi.AddParameter("shc","m","snow holding capacity","ParameterDB_Snow",DT_Raster1D);
mdi.AddParameter("T_snow","oC","snowfall temperature","ParameterDB_Snow",DT_Single);
mdi.AddParameter("swe0","mm","Initial snow water equivalent","ParameterDB_Snow",DT_Single);
//8 single parameter
mdi.AddParameter("shc_crop ","m","snow holding capacity of cropland with conventional tillage used to calculate land cover weighting factor","ParameterDB_Snow",DT_Single);
mdi.AddParameter("k_slope","-","Slope coefficient in wind direction","ParameterDB_Snow",DT_Single);
mdi.AddParameter("k_curvature","-","Curvature coefficient in wind direction","ParameterDB_Snow",DT_Single);
mdi.AddParameter("ut0","m/s","Threshold wind speed at -27 degree for starting the redistribution of sno","ParameterDB_Snow",DT_Single);
mdi.AddParameter("u0","m/s","a wind speed over threshold at which the decay coefficient is one","ParameterDB_Snow",DT_Single);
//mdi.AddParameter("t_snow","oC","snowfall temperature","ParameterDB_Snow",DT_Single);
mdi.AddParameter("t_wind","oC","temperature at which wind transport of snow is most favorable","ParameterDB_Snow",DT_Single);
mdi.AddParameter("K_blow","-"," a fraction coefficient of snow blowing into or out of the watershed","ParameterDB_Snow",DT_Single);
mdi.AddParameter("T0","oC","the snowmelt threshold temperature ","ParameterDB_Snow",DT_Single);
//input from other module
mdi.AddInput("T_WS","m/s","wind speed measured at 10 m height","Module",DT_Array1D); // from time series data module
mdi.AddInput("D_NEPR","mm","net precipitation","Module",DT_Raster1D); // from interception module
mdi.AddInput("D_SNAC","mm", "distribution of snow accumulation", "Module",DT_Raster1D); // from snow water balance module
mdi.AddInput("SWE","mm","average SA of the watershed","Module",DT_Single); // from snow water balance module
mdi.AddInput("D_TMIN","oC","min temperature","Module",DT_Raster1D);
mdi.AddInput("D_TMAX","oC","max temperature","Module",DT_Raster1D);
// set the output variables
mdi.AddOutput(VAR_SNRD,UNIT_DEPTH_MM, DESC_SNRD, DT_Raster1D);
// write out the XML file.
string res = mdi.GetXMLDocument();
char* tmp = new char[res.size()+1];
strprintf(tmp, res.size()+1, "%s", res.c_str());
return tmp;
}示例10: strprintf
// function to return the XML Metadata document string
extern "C" SEIMS_MODULE_API const char *MetadataInformation()
{
MetadataInfo mdi;
// set the information properties
mdi.SetAuthor("Junzhi Liu, Zhiqiang Yu, LiangJun Zhu");
mdi.SetClass(MCLS_SUR_RUNOFF, MCLSDESC_SUR_RUNOFF);
mdi.SetDescription(MDESC_SUR_MR);
mdi.SetEmail(SEIMS_EMAIL);
mdi.SetHelpfile("SUR_MR.chm");
mdi.SetID(MID_SUR_MR);
mdi.SetName(MID_SUR_MR);
mdi.SetVersion("1.5");
mdi.SetWebsite(SEIMS_SITE);
mdi.AddParameter(Tag_HillSlopeTimeStep, UNIT_SECOND, DESC_DT_HS, File_Input, DT_Single);
//mdi.AddParameter(VAR_T_SNOW, UNIT_TEMP_DEG, DESC_T_SNOW, Source_ParameterDB, DT_Single);
//mdi.AddParameter(VAR_T0, UNIT_TEMP_DEG, DESC_T0, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_T_SOIL, UNIT_TEMP_DEG, DESC_T_SOIL, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_K_RUN, UNIT_NON_DIM, DESC_K_RUN, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_P_MAX, UNIT_DEPTH_MM, DESC_P_MAX, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_S_FROZEN, UNIT_WAT_RATIO, DESC_S_FROZEN, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_RUNOFF_CO, UNIT_NON_DIM, DESC_RUNOFF_CO, Source_ParameterDB, DT_Raster1D);
mdi.AddParameter(VAR_MOIST_IN, UNIT_PERCENT, DESC_MOIST_IN, Source_ParameterDB, DT_Raster1D);
mdi.AddParameter(VAR_SOILLAYERS, UNIT_NON_DIM, DESC_SOILLAYERS, Source_ParameterDB, DT_Raster1D);
//mdi.AddParameter(VAR_SOILTHICK, UNIT_DEPTH_MM, DESC_SOILTHICK, Source_ParameterDB, DT_Raster2D);
mdi.AddParameter(VAR_SOL_AWC, UNIT_DEPTH_MM, DESC_SOL_AWC, Source_ParameterDB, DT_Raster2D);
mdi.AddParameter(VAR_SOL_SUMSAT, UNIT_DEPTH_MM, DESC_SOL_SUMSAT, Source_ParameterDB, DT_Raster2D);
// mdi.AddParameter(VAR_FIELDCAP, UNIT_WAT_RATIO, DESC_FIELDCAP, Source_ParameterDB, DT_Raster2D);
//mdi.AddParameter(VAR_WILTPOINT,UNIT_WAT_RATIO, DESC_WILTPOINT, Source_ParameterDB, DT_Raster2D);
//mdi.AddParameter(VAR_POROST, UNIT_NON_DIM, DESC_POROST, Source_ParameterDB, DT_Raster2D);
mdi.AddInput(VAR_NEPR, UNIT_DEPTH_MM, DESC_NEPR, Source_Module, DT_Raster1D);
mdi.AddInput(VAR_TMEAN, UNIT_TEMP_DEG, DESC_TMEAN, Source_Module, DT_Raster1D);
mdi.AddInput(VAR_DPST, UNIT_DEPTH_MM, DESC_DPST, Source_Module, DT_Raster1D);
mdi.AddInput(VAR_SOTE, UNIT_TEMP_DEG, DESC_SOTE, Source_Module, DT_Raster1D);
mdi.AddInput(VAR_IMPOUND_TRIG, UNIT_NON_DIM, DESC_IMPOUND_TRIG, Source_Module_Optional, DT_Raster1D);
mdi.AddInput(VAR_POT_VOL, UNIT_DEPTH_MM, DESC_POT_VOL, Source_Module_Optional, DT_Raster1D);
mdi.AddOutput(VAR_EXCP, UNIT_DEPTH_MM, DESC_EXCP, DT_Raster1D);
mdi.AddOutput(VAR_INFIL, UNIT_DEPTH_MM, DESC_INFIL, DT_Raster1D);
mdi.AddOutput(VAR_SOL_ST, UNIT_DEPTH_MM, DESC_SOL_ST, DT_Raster2D);
mdi.AddOutput(VAR_SOL_SW, UNIT_DEPTH_MM, DESC_SOL_SW, DT_Raster1D);
// write out the XML file.
string res = mdi.GetXMLDocument();
char *tmp = new char[res.size() + 1];
strprintf(tmp, res.size() + 1, "%s", res.c_str());
return tmp;
}示例11: MetadataInformation
// function to return the XML Metadata document string
extern "C" SEIMS_MODULE_API const char* MetadataInformation()
{
string res = "";
MetadataInfo mdi;
// set the information properties
mdi.SetAuthor("Junzhi Liu");
mdi.SetClass(MCLS_CH_ROUTING, MCLSDESC_CH_ROUTING);
mdi.SetDescription(MDESC_CH_MSK);
mdi.SetEmail(SEIMS_EMAIL);
mdi.SetHelpfile("CH_MSK.chm");
mdi.SetID(MID_CH_MSK);
mdi.SetName(MID_CH_MSK);
mdi.SetVersion("0.1");
mdi.SetWebsite(SEIMS_SITE);
mdi.AddParameter(Tag_HillSlopeTimeStep,UNIT_SECOND,DESC_TIMESTEP,File_Input, DT_Single);
mdi.AddParameter(Tag_CellSize, UNIT_NON_DIM, DESC_CellSize, Source_ParameterDB, DT_Single);
mdi.AddParameter(Tag_CellWidth, UNIT_LEN_M, DESC_CellWidth, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_MSK_X, UNIT_NON_DIM,DESC_MSK_X,Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_SLOPE,UNIT_PERCENT,DESC_SLOPE,Source_ParameterDB, DT_Raster1D);
mdi.AddParameter(VAR_FLOWDIR,UNIT_NON_DIM,DESC_FLOWDIR,Source_ParameterDB, DT_Raster1D);
mdi.AddParameter(VAR_CHWIDTH,UNIT_LEN_M,DESC_CHWIDTH,Source_ParameterDB, DT_Raster1D);
// reach information
mdi.AddParameter(Tag_FLOWOUT_INDEX_D8, UNIT_NON_DIM, DESC_FLOWOUT_INDEX_D8, Source_ParameterDB, DT_Array1D);
mdi.AddParameter(Tag_FLOWIN_INDEX_D8,UNIT_NON_DIM,DESC_FLOWIN_INDEX_D8,Source_ParameterDB, DT_Array2D);
mdi.AddParameter(VAR_STREAM_LINK, UNIT_NON_DIM,DESC_STREAM_LINK, Source_ParameterDB, DT_Raster1D);
mdi.AddParameter(Tag_ReachParameter, UNIT_NON_DIM, DESC_REACH_PARAMETER, Source_ParameterDB, DT_Array2D);
mdi.AddParameter(VAR_CHS0,UNIT_STRG_M3M,DESC_CHS0,Source_ParameterDB, DT_Single);
// from other module
mdi.AddInput(VAR_SBQG,UNIT_FLOW_CMS,DESC_SBQG,Source_Module, DT_Array1D);
mdi.AddInput(VAR_QSOIL,UNIT_FLOW_CMS,DESC_QSOIL,Source_Module, DT_Raster1D);
mdi.AddInput(VAR_QOVERLAND,UNIT_FLOW_CMS,DESC_QOVERLAND,Source_Module, DT_Raster1D);
mdi.AddInput(VAR_D_P,UNIT_DEPTH_MM,DESC_D_P,Source_Module, DT_Raster1D);
// output
mdi.AddOutput(VAR_QCH,UNIT_FLOW_CMS,DESC_QCH, DT_Array2D);
mdi.AddOutput(VAR_QOUTLET,UNIT_FLOW_CMS,DESC_QOUTLET, DT_Single);
mdi.AddOutput(VAR_QSUBBASIN,UNIT_FLOW_CMS, DESC_QSUBBASIN, DT_Array1D);
mdi.AddOutput(VAR_HCH,UNIT_DEPTH_MM, DESC_HCH, DT_Array2D);
res = mdi.GetXMLDocument();
char* tmp = new char[res.size()+1];
strprintf(tmp, res.size()+1, "%s", res.c_str());
return tmp;
}示例12: MetadataInformation
// function to return the XML Metadata document string
extern "C" SEIMS_MODULE_API const char* MetadataInformation()
{
string res = "";
MetadataInfo mdi;
// set the information properties
mdi.SetAuthor("Wu Hui");
mdi.SetClass(MCLS_SED_ROUTING, MCLSDESC_SED_ROUTING);
mdi.SetDescription(MDESC_SEDR_VCD);
mdi.SetEmail(SEIMS_EMAIL);
mdi.SetHelpfile("SEDR_VCD.chm");
mdi.SetID(MID_SEDR_VCD);
mdi.SetName(MID_SEDR_VCD);
mdi.SetVersion("0.1");
mdi.SetWebsite(SEIMS_SITE);
#ifdef STORM_MODEL
mdi.AddParameter(Tag_ChannelTimeStep,UNIT_SECOND,DESC_TIMESTEP,File_Input,DT_Single); //for long term model // this method is daily time interval based.
#else
mdi.AddParameter(Tag_TimeStep,UNIT_SECOND,DESC_TIMESTEP,File_Input,DT_Single); /// in Module Settings: time_t SettingsInput::getDtDaily() const{return 86400;}
#endif
mdi.AddParameter(VAR_P_RF,UNIT_NON_DIM, DESC_P_RF,Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_SPCON,UNIT_NON_DIM, DESC_SPCON,Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_SPEXP,UNIT_NON_DIM,DESC_SPEXP ,Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_VCRIT,UNIT_SPEED_MS, DESC_VCRIT,Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_CHS0, UNIT_STRG_M3M, DESC_CHS0, Source_ParameterDB, DT_Single);
mdi.AddParameter(Tag_RchParam,UNIT_NON_DIM,DESC_REACH_PARAMETER, Source_ParameterDB,DT_Array2D);
mdi.AddInput(VAR_SED_TO_CH,UNIT_TONS,DESC_SED_TO_CH,Source_Module, DT_Array1D); // for longterm model
mdi.AddInput(VAR_SUB_SEDTOCH,UNIT_KG,DESC_SUB_SEDTOCH,Source_Module, DT_Array1D); // for storm model
mdi.AddInput(VAR_QRECH,UNIT_FLOW_CMS,DESC_QRECH,Source_Module,DT_Array1D);
mdi.AddInput(VAR_QS,UNIT_FLOW_CMS,DESC_QS,Source_Module,DT_Array1D);
mdi.AddInput(VAR_QI,UNIT_FLOW_CMS,DESC_QI,Source_Module,DT_Array1D);
mdi.AddInput(VAR_QG,UNIT_FLOW_CMS,DESC_QG,Source_Module,DT_Array1D);
mdi.AddInput(VAR_CHST, UNIT_VOL_M3, DESC_CHST,Source_Module,DT_Array1D);
mdi.AddInput(VAR_CHWTDEPTH, UNIT_LEN_M, DESC_CHWTDEPTH, Source_Module,DT_Array1D);
mdi.AddOutput(VAR_SED_RECH,UNIT_TONS,DESC_SED_RECH,DT_Array1D);
mdi.AddOutput(VAR_CHSB,UNIT_NON_DIM,DESC_CHSB,DT_Array2D);
mdi.AddOutput(VAR_SED_OUTLET,UNIT_TONS,DESC_SED_OUTLET, DT_Single);
// set the dependencies
mdi.AddDependency(MCLS_OL_EROSION,MCLSDESC_OL_EROSION);
mdi.AddDependency(MCLS_CH_ROUTING, MCLSDESC_CH_ROUTING); //for module GWA_RE to update groundwater storage
res = mdi.GetXMLDocument();
char* tmp = new char[res.size()+1];
strprintf(tmp, res.size()+1, "%s", res.c_str());
return tmp;
}示例13: MetadataInformation
// function to return the XML Metadata document string
extern "C" SEIMS_MODULE_API const char* MetadataInformation()
{
MetadataInfo mdi;
// set the information properties
mdi.SetAuthor("Cheng Wei");
mdi.SetClass("Yield", "Calculate the amount of yield.");
mdi.SetDescription("For simplicity purpose for the time being, the algorithm used in the original WetSpa is incorporated in the SEIMS.");
mdi.SetEmail("[email protected]");
mdi.SetID("Yield");
mdi.SetName("Yield");
mdi.SetVersion("0.5");
mdi.SetWebsite("http://seims.github.io/SEIMS");
mdi.SetHelpfile("Yield.chm");
mdi.AddParameter("IDC","","land cover/plant classification","ParameterDB_Crop",DT_Raster);
mdi.AddParameter("CNYLD","","fraction of nitrogen in the yield","ParameterDB_Crop",DT_Raster);
mdi.AddParameter("CPYLD","kg/ha"," fraction of phosphorus in the yield","ParameterDB_Crop",DT_Raster);
mdi.AddParameter("HVSTI","kg/ha"," potential harvest index for the plant at maturity given ideal growing conditions","ParameterDB_Crop",DT_Raster);
mdi.AddParameter("WSYF","","harvest index for the plant in drought conditions and represents the minimum harvest index allowed for the plant","ParameterDB_Crop",DT_Raster);
mdi.AddParameter("DLAI","","Decline LAI Fraction","ParameterDB_Crop",DT_Raster);
mdi.AddParameter("harvestDate","","the simulation end of date","ParameterDB",DT_Raster);
mdi.AddInput("LAI","","leaf area index for a given day","Module", DT_Raster);
mdi.AddInput("D_PET","mm/d", "Potential evapotranspiration", "Module",DT_Raster);///////????zhiqinag: "D_PETC"
mdi.AddInput("D_SOET","mm","soil evapotranpiration","Module",DT_Raster); //actual evapotranspiration
mdi.AddInput("Fr_PHU","","fraction of phu accumulated on a given day ","Module",DT_Raster);
mdi.AddInput("BIOMASS_N","kg/ha","actual biomass N","Module",DT_Raster);
mdi.AddInput("BIOMASS_P","kg/ha","actual biomass P","Module",DT_Raster);
mdi.AddInput("BIOMASS_AG","kg/ha"," aboveground biomass on the day of harvest","Module",DT_Raster);
mdi.AddInput("BIOMASS_ROOT","kg/ha","biomass root","Module",DT_Raster);
mdi.AddInput("BIOMASS","kg/ha","total biomass","Module",DT_Raster);
mdi.AddInput("Total_WaterUptake","mm","total water uptake","Module",DT_Raster);
// set the output variables
mdi.AddOutput("Yield_N","kg/ha","amount of nitrogen removed in the yield",DT_Raster);
mdi.AddOutput("Yield_P","kg/ha","amount of phosphorus removed in the yield",DT_Raster);
mdi.AddOutput("Yield","kg/ha","crop yield",DT_Raster);
// write out the XML file.
string res = mdi.GetXMLDocument();
char* tmp = new char[res.size()+1];
strprintf(tmp, res.size()+1, "%s", res.c_str());
return tmp;
}示例14: MetadataInformation
extern "C" SEIMS_MODULE_API const char* MetadataInformation() {
MetadataInfo mdi;
mdi.SetAuthor("Huiran Gao; Liangjun Zhu");
mdi.SetClass(MCLS_NUTRGW, MCLSDESC_NUTRGW);
mdi.SetDescription(MDESC_NUTRGW);
mdi.SetEmail(SEIMS_EMAIL);
mdi.SetID(MDESC_NUTRGW);
mdi.SetName(MDESC_NUTRGW);
mdi.SetVersion("1.1");
mdi.SetWebsite(SEIMS_SITE);
mdi.SetHelpfile("");
// set the parameters
mdi.AddParameter(Tag_TimeStep, UNIT_SECOND, DESC_TIMESTEP, File_Config, DT_Single);
mdi.AddParameter(Tag_CellWidth, UNIT_LEN_M, DESC_CellWidth, Source_ParameterDB, DT_Single);
mdi.AddParameter(VAR_SUBBSNID_NUM, UNIT_NON_DIM, DESC_SUBBSNID_NUM, Source_ParameterDB, DT_Single);
mdi.AddParameter(Tag_SubbasinId, UNIT_NON_DIM, Tag_SubbasinId, Source_ParameterDB, DT_Single);
// parameters for subbasin sum
mdi.AddParameter(VAR_SUBBSN, UNIT_NON_DIM, DESC_SUBBSN, Source_ParameterDB, DT_Raster1D);
mdi.AddParameter(VAR_SUBBASIN_PARAM, UNIT_NON_DIM, DESC_SUBBASIN_PARAM, Source_ParameterDB, DT_Subbasin);
mdi.AddParameter(VAR_SOILLAYERS, UNIT_NON_DIM, DESC_SOILLAYERS, Source_ParameterDB, DT_Raster1D);
mdi.AddParameter(VAR_GW0, UNIT_DEPTH_MM, DESC_GW0, Source_ParameterDB, DT_Single);
// add reach information
mdi.AddParameter(VAR_REACH_PARAM, UNIT_NON_DIM, DESC_REACH_PARAM, Source_ParameterDB, DT_Reach);
// set the input from other modules
mdi.AddInput(VAR_SBQG, UNIT_FLOW_CMS, DESC_SBQG, Source_Module, DT_Array1D);
mdi.AddInput(VAR_SBGS, UNIT_DEPTH_MM, DESC_SBGS, Source_Module, DT_Array1D);
mdi.AddInput(VAR_SOL_NO3, UNIT_CONT_KGHA, DESC_SOL_NO3, Source_Module, DT_Raster2D);
mdi.AddInput(VAR_SOL_SOLP, UNIT_CONT_KGHA, DESC_SOL_SOLP, Source_Module, DT_Raster2D);
mdi.AddInput(VAR_PERCO_N_GW, UNIT_KG, DESC_PERCO_N, Source_Module, DT_Array1D);
mdi.AddInput(VAR_PERCO_P_GW, UNIT_KG, DESC_PERCO_P, Source_Module, DT_Array1D);
// set the output variables
mdi.AddOutput(VAR_GWNO3_CONC, UNIT_CONCENTRATION, DESC_GWNO3_CONC, DT_Array1D);
mdi.AddOutput(VAR_GWSOLP_CONC, UNIT_CONCENTRATION, DESC_GWSOLP, DT_Array1D);
mdi.AddOutput(VAR_NO3GW_TOCH, UNIT_KG, DESC_NO3GW_CH, DT_Array1D);
mdi.AddOutput(VAR_MINPGW_TOCH, UNIT_KG, DESC_MINPGW_CH, DT_Array1D);
mdi.AddOutput(VAR_GWNO3, UNIT_KG, DESC_GWNO3, DT_Array1D);
mdi.AddOutput(VAR_GWSOLP, UNIT_KG, DESC_GWSOLP_CONC, DT_Array1D);
string res = mdi.GetXMLDocument();
char* tmp = new char[res.size() + 1];
strprintf(tmp, res.size() + 1, "%s", res.c_str());
return tmp;
}示例15: strprintf
/// function to return the XML Metadata document string
extern "C" SEIMS_MODULE_API const char *MetadataInformation()
{
MetadataInfo mdi;
string res;
mdi.SetAuthor("LiangJun Zhu");
mdi.SetClass(MCLS_AET, MCLSDESC_AET);
mdi.SetDescription(MDESC_AET_PTH);
mdi.SetID(MID_AET_PTH);
mdi.SetName(MID_AET_PTH);
mdi.SetVersion("1.1");
mdi.SetEmail(SEIMS_EMAIL);
mdi.SetWebsite(SEIMS_SITE);
mdi.SetHelpfile("");
/// set parameters from database
mdi.AddParameter(VAR_ESCO, UNIT_NON_DIM, DESC_ESCO, Source_ParameterDB, DT_Raster1D);
mdi.AddParameter(VAR_SOILLAYERS, UNIT_NON_DIM, DESC_SOILLAYERS, Source_ParameterDB, DT_Raster1D);
mdi.AddParameter(VAR_SOILDEPTH, UNIT_DEPTH_MM, DESC_SOILDEPTH, Source_ParameterDB, DT_Raster2D);
mdi.AddParameter(VAR_SOILTHICK, UNIT_DEPTH_MM, DESC_SOILTHICK, Source_ParameterDB, DT_Raster2D);
mdi.AddParameter(VAR_SOL_AWC, UNIT_DEPTH_MM, DESC_SOL_AWC, Source_ParameterDB, DT_Raster2D);
mdi.AddParameter(VAR_SOL_NO3, UNIT_CONT_KGHA, DESC_SOL_NO3, Source_Module, DT_Raster2D);
/// set input from other modules
mdi.AddInput(DataType_MeanTemperature, UNIT_TEMP_DEG, DESC_TMEAN, Source_Module, DT_Raster1D);
mdi.AddInput(VAR_LAIDAY, UNIT_AREA_RATIO, DESC_LAIDAY, Source_Module, DT_Raster1D);
mdi.AddInput(VAR_PET, UNIT_WTRDLT_MMD, DESC_PET, Source_Module, DT_Raster1D);
mdi.AddInput(VAR_INET, UNIT_DEPTH_MM, DESC_INET, Source_Module_Optional, DT_Raster1D);
mdi.AddInput(VAR_SNAC, UNIT_DEPTH_MM, DESC_SNAC, Source_Module, DT_Raster1D); /// in swat, sno_hru
mdi.AddInput(VAR_SNSB, UNIT_DEPTH_MM, DESC_SNSB, Source_Module_Optional, DT_Raster1D);
mdi.AddInput(VAR_SOL_COV, UNIT_CONT_KGHA, DESC_SOL_COV, Source_Module, DT_Raster1D);
mdi.AddInput(VAR_SOL_ST, UNIT_DEPTH_MM, DESC_SOL_ST, Source_Module, DT_Raster2D);/// sol_st in SWAT
mdi.AddInput(VAR_SOL_SW, UNIT_DEPTH_MM, DESC_SOL_SW, Source_Module, DT_Raster1D); /// sol_sw in SWAT
/// set the output variables
mdi.AddOutput(VAR_SNSB, UNIT_DEPTH_MM, DESC_SNSB, DT_Raster1D); /// in swat, snoev
mdi.AddOutput(VAR_PPT, UNIT_DEPTH_MM, DESC_PPT, DT_Raster1D);
mdi.AddOutput(VAR_SOET, UNIT_DEPTH_MM, DESC_SOET, DT_Raster1D);
mdi.AddOutput(VAR_SNAC, UNIT_DEPTH_MM, DESC_SNAC, DT_Raster1D);
mdi.AddOutput(VAR_SNO3UP, UNIT_CONT_KGHA, DESC_SNO3UP, DT_Single);
//mdi.AddOutput(VAR_SOL_SW, UNIT_DEPTH_MM, DESC_SOL_SW, DT_Raster1D); /// mm, different from VAR_SOMO
//mdi.AddOutput(VAR_SOMO, UNIT_DEPTH_MM, DESC_SOL_ST, DT_Raster2D);
/// write out the XML file.
res = mdi.GetXMLDocument();
char *tmp = new char[res.size() + 1];
strprintf(tmp, res.size() + 1, "%s", res.c_str());
return tmp;
}