C++ LiveVariables::getVarInfo方法代码示例

/// LowerAtomicPHINode - Lower the PHI node at the top of the specified block,
/// under the assuption that it needs to be lowered in a way that supports
/// atomic execution of PHIs.  This lowering method is always correct all of the
/// time.
///
void PHIElimination::LowerAtomicPHINode(
                                      MachineBasicBlock &MBB,
                                      MachineBasicBlock::iterator AfterPHIsIt) {
  ++NumAtomic;
  // Unlink the PHI node from the basic block, but don't delete the PHI yet.
  MachineInstr *MPhi = MBB.remove(MBB.begin());

  unsigned NumSrcs = (MPhi->getNumOperands() - 1) / 2;
  unsigned DestReg = MPhi->getOperand(0).getReg();
  assert(MPhi->getOperand(0).getSubReg() == 0 && "Can't handle sub-reg PHIs");
  bool isDead = MPhi->getOperand(0).isDead();

  // Create a new register for the incoming PHI arguments.
  MachineFunction &MF = *MBB.getParent();
  unsigned IncomingReg = 0;
  bool reusedIncoming = false;  // Is IncomingReg reused from an earlier PHI?

  // Insert a register to register copy at the top of the current block (but
  // after any remaining phi nodes) which copies the new incoming register
  // into the phi node destination.
  const TargetInstrInfo *TII = MF.getTarget().getInstrInfo();
  if (isSourceDefinedByImplicitDef(MPhi, MRI))
    // If all sources of a PHI node are implicit_def, just emit an
    // implicit_def instead of a copy.
    BuildMI(MBB, AfterPHIsIt, MPhi->getDebugLoc(),
            TII->get(TargetOpcode::IMPLICIT_DEF), DestReg);
  else {
    // Can we reuse an earlier PHI node? This only happens for critical edges,
    // typically those created by tail duplication.
    unsigned &entry = LoweredPHIs[MPhi];
    if (entry) {
      // An identical PHI node was already lowered. Reuse the incoming register.
      IncomingReg = entry;
      reusedIncoming = true;
      ++NumReused;
      DEBUG(dbgs() << "Reusing " << PrintReg(IncomingReg) << " for " << *MPhi);
    } else {
      const TargetRegisterClass *RC = MF.getRegInfo().getRegClass(DestReg);
      entry = IncomingReg = MF.getRegInfo().createVirtualRegister(RC);
    }
    BuildMI(MBB, AfterPHIsIt, MPhi->getDebugLoc(),
            TII->get(TargetOpcode::COPY), DestReg)
      .addReg(IncomingReg);
  }

  // Update live variable information if there is any.
  LiveVariables *LV = getAnalysisIfAvailable<LiveVariables>();
  if (LV) {
    MachineInstr *PHICopy = prior(AfterPHIsIt);

    if (IncomingReg) {
      LiveVariables::VarInfo &VI = LV->getVarInfo(IncomingReg);

      // Increment use count of the newly created virtual register.
      VI.NumUses++;
      LV->setPHIJoin(IncomingReg);

      // When we are reusing the incoming register, it may already have been
      // killed in this block. The old kill will also have been inserted at
      // AfterPHIsIt, so it appears before the current PHICopy.
      if (reusedIncoming)
        if (MachineInstr *OldKill = VI.findKill(&MBB)) {
          DEBUG(dbgs() << "Remove old kill from " << *OldKill);
          LV->removeVirtualRegisterKilled(IncomingReg, OldKill);
          DEBUG(MBB.dump());
        }

      // Add information to LiveVariables to know that the incoming value is
      // killed.  Note that because the value is defined in several places (once
      // each for each incoming block), the "def" block and instruction fields
      // for the VarInfo is not filled in.
      LV->addVirtualRegisterKilled(IncomingReg, PHICopy);
    }

    // Since we are going to be deleting the PHI node, if it is the last use of
    // any registers, or if the value itself is dead, we need to move this
    // information over to the new copy we just inserted.
    LV->removeVirtualRegistersKilled(MPhi);

    // If the result is dead, update LV.
    if (isDead) {
      LV->addVirtualRegisterDead(DestReg, PHICopy);
      LV->removeVirtualRegisterDead(DestReg, MPhi);
    }
  }

  // Adjust the VRegPHIUseCount map to account for the removal of this PHI node.
  for (unsigned i = 1; i != MPhi->getNumOperands(); i += 2)
    --VRegPHIUseCount[BBVRegPair(MPhi->getOperand(i+1).getMBB()->getNumber(),
                                 MPhi->getOperand(i).getReg())];

  // Now loop over all of the incoming arguments, changing them to copy into the
  // IncomingReg register in the corresponding predecessor basic block.
  SmallPtrSet<MachineBasicBlock*, 8> MBBsInsertedInto;
  for (int i = NumSrcs - 1; i >= 0; --i) {
//.........这里部分代码省略.........

MachineBasicBlock *
MachineBasicBlock::SplitCriticalEdge(MachineBasicBlock *Succ, Pass *P) {
  // Splitting the critical edge to a landing pad block is non-trivial. Don't do
  // it in this generic function.
  if (Succ->isLandingPad())
    return nullptr;

  MachineFunction *MF = getParent();
  DebugLoc dl;  // FIXME: this is nowhere

  // Performance might be harmed on HW that implements branching using exec mask
  // where both sides of the branches are always executed.
  if (MF->getTarget().requiresStructuredCFG())
    return nullptr;

  // We may need to update this's terminator, but we can't do that if
  // AnalyzeBranch fails. If this uses a jump table, we won't touch it.
  const TargetInstrInfo *TII = MF->getSubtarget().getInstrInfo();
  MachineBasicBlock *TBB = nullptr, *FBB = nullptr;
  SmallVector<MachineOperand, 4> Cond;
  if (TII->AnalyzeBranch(*this, TBB, FBB, Cond))
    return nullptr;

  // Avoid bugpoint weirdness: A block may end with a conditional branch but
  // jumps to the same MBB is either case. We have duplicate CFG edges in that
  // case that we can't handle. Since this never happens in properly optimized
  // code, just skip those edges.
  if (TBB && TBB == FBB) {
    DEBUG(dbgs() << "Won't split critical edge after degenerate BB#"
                 << getNumber() << '\n');
    return nullptr;
  }

  MachineBasicBlock *NMBB = MF->CreateMachineBasicBlock();
  MF->insert(std::next(MachineFunction::iterator(this)), NMBB);
  DEBUG(dbgs() << "Splitting critical edge:"
        " BB#" << getNumber()
        << " -- BB#" << NMBB->getNumber()
        << " -- BB#" << Succ->getNumber() << '\n');

  LiveIntervals *LIS = P->getAnalysisIfAvailable<LiveIntervals>();
  SlotIndexes *Indexes = P->getAnalysisIfAvailable<SlotIndexes>();
  if (LIS)
    LIS->insertMBBInMaps(NMBB);
  else if (Indexes)
    Indexes->insertMBBInMaps(NMBB);

  // On some targets like Mips, branches may kill virtual registers. Make sure
  // that LiveVariables is properly updated after updateTerminator replaces the
  // terminators.
  LiveVariables *LV = P->getAnalysisIfAvailable<LiveVariables>();

  // Collect a list of virtual registers killed by the terminators.
  SmallVector<unsigned, 4> KilledRegs;
  if (LV)
    for (instr_iterator I = getFirstInstrTerminator(), E = instr_end();
         I != E; ++I) {
      MachineInstr *MI = I;
      for (MachineInstr::mop_iterator OI = MI->operands_begin(),
           OE = MI->operands_end(); OI != OE; ++OI) {
        if (!OI->isReg() || OI->getReg() == 0 ||
            !OI->isUse() || !OI->isKill() || OI->isUndef())
          continue;
        unsigned Reg = OI->getReg();
        if (TargetRegisterInfo::isPhysicalRegister(Reg) ||
            LV->getVarInfo(Reg).removeKill(MI)) {
          KilledRegs.push_back(Reg);
          DEBUG(dbgs() << "Removing terminator kill: " << *MI);
          OI->setIsKill(false);
        }
      }
    }

  SmallVector<unsigned, 4> UsedRegs;
  if (LIS) {
    for (instr_iterator I = getFirstInstrTerminator(), E = instr_end();
         I != E; ++I) {
      MachineInstr *MI = I;

      for (MachineInstr::mop_iterator OI = MI->operands_begin(),
           OE = MI->operands_end(); OI != OE; ++OI) {
        if (!OI->isReg() || OI->getReg() == 0)
          continue;

        unsigned Reg = OI->getReg();
        if (std::find(UsedRegs.begin(), UsedRegs.end(), Reg) == UsedRegs.end())
          UsedRegs.push_back(Reg);
      }
    }
  }

  ReplaceUsesOfBlockWith(Succ, NMBB);

  // If updateTerminator() removes instructions, we need to remove them from
  // SlotIndexes.
  SmallVector<MachineInstr*, 4> Terminators;
  if (Indexes) {
    for (instr_iterator I = getFirstInstrTerminator(), E = instr_end();
         I != E; ++I)
      Terminators.push_back(I);
//.........这里部分代码省略.........

/// LowerAtomicPHINode - Lower the PHI node at the top of the specified block,
/// under the assuption that it needs to be lowered in a way that supports
/// atomic execution of PHIs.  This lowering method is always correct all of the
/// time.
///  
void llvm::PHIElimination::LowerAtomicPHINode(
                                      MachineBasicBlock &MBB,
                                      MachineBasicBlock::iterator AfterPHIsIt) {
  // Unlink the PHI node from the basic block, but don't delete the PHI yet.
  MachineInstr *MPhi = MBB.remove(MBB.begin());

  unsigned NumSrcs = (MPhi->getNumOperands() - 1) / 2;
  unsigned DestReg = MPhi->getOperand(0).getReg();
  bool isDead = MPhi->getOperand(0).isDead();

  // Create a new register for the incoming PHI arguments.
  MachineFunction &MF = *MBB.getParent();
  const TargetRegisterClass *RC = MF.getRegInfo().getRegClass(DestReg);
  unsigned IncomingReg = 0;

  // Insert a register to register copy at the top of the current block (but
  // after any remaining phi nodes) which copies the new incoming register
  // into the phi node destination.
  const TargetInstrInfo *TII = MF.getTarget().getInstrInfo();
  if (isSourceDefinedByImplicitDef(MPhi, MRI))
    // If all sources of a PHI node are implicit_def, just emit an
    // implicit_def instead of a copy.
    BuildMI(MBB, AfterPHIsIt, MPhi->getDebugLoc(),
            TII->get(TargetInstrInfo::IMPLICIT_DEF), DestReg);
  else {
    IncomingReg = MF.getRegInfo().createVirtualRegister(RC);
    TII->copyRegToReg(MBB, AfterPHIsIt, DestReg, IncomingReg, RC, RC);
  }

  // Record PHI def.
  assert(!hasPHIDef(DestReg) && "Vreg has multiple phi-defs?"); 
  PHIDefs[DestReg] = &MBB;

  // Update live variable information if there is any.
  LiveVariables *LV = getAnalysisIfAvailable<LiveVariables>();
  if (LV) {
    MachineInstr *PHICopy = prior(AfterPHIsIt);

    if (IncomingReg) {
      // Increment use count of the newly created virtual register.
      LV->getVarInfo(IncomingReg).NumUses++;

      // Add information to LiveVariables to know that the incoming value is
      // killed.  Note that because the value is defined in several places (once
      // each for each incoming block), the "def" block and instruction fields
      // for the VarInfo is not filled in.
      LV->addVirtualRegisterKilled(IncomingReg, PHICopy);
    }

    // Since we are going to be deleting the PHI node, if it is the last use of
    // any registers, or if the value itself is dead, we need to move this
    // information over to the new copy we just inserted.
    LV->removeVirtualRegistersKilled(MPhi);

    // If the result is dead, update LV.
    if (isDead) {
      LV->addVirtualRegisterDead(DestReg, PHICopy);
      LV->removeVirtualRegisterDead(DestReg, MPhi);
    }
  }

  // Adjust the VRegPHIUseCount map to account for the removal of this PHI node.
  for (unsigned i = 1; i != MPhi->getNumOperands(); i += 2)
    --VRegPHIUseCount[BBVRegPair(MPhi->getOperand(i + 1).getMBB(),
                                 MPhi->getOperand(i).getReg())];

  // Now loop over all of the incoming arguments, changing them to copy into the
  // IncomingReg register in the corresponding predecessor basic block.
  SmallPtrSet<MachineBasicBlock*, 8> MBBsInsertedInto;
  for (int i = NumSrcs - 1; i >= 0; --i) {
    unsigned SrcReg = MPhi->getOperand(i*2+1).getReg();
    assert(TargetRegisterInfo::isVirtualRegister(SrcReg) &&
           "Machine PHI Operands must all be virtual registers!");

    // Get the MachineBasicBlock equivalent of the BasicBlock that is the source
    // path the PHI.
    MachineBasicBlock &opBlock = *MPhi->getOperand(i*2+2).getMBB();

    // Record the kill.
    PHIKills[SrcReg].insert(&opBlock);

    // If source is defined by an implicit def, there is no need to insert a
    // copy.
    MachineInstr *DefMI = MRI->getVRegDef(SrcReg);
    if (DefMI->getOpcode() == TargetInstrInfo::IMPLICIT_DEF) {
      ImpDefs.insert(DefMI);
      continue;
    }

    // Check to make sure we haven't already emitted the copy for this block.
    // This can happen because PHI nodes may have multiple entries for the same
    // basic block.
    if (!MBBsInsertedInto.insert(&opBlock))
      continue;  // If the copy has already been emitted, we're done.
 
//.........这里部分代码省略.........

MachineBasicBlock *
MachineBasicBlock::SplitCriticalEdge(MachineBasicBlock *Succ, Pass *P) {
  MachineFunction *MF = getParent();
  DebugLoc dl;  // FIXME: this is nowhere

  // We may need to update this's terminator, but we can't do that if
  // AnalyzeBranch fails. If this uses a jump table, we won't touch it.
  const TargetInstrInfo *TII = MF->getTarget().getInstrInfo();
  MachineBasicBlock *TBB = 0, *FBB = 0;
  SmallVector<MachineOperand, 4> Cond;
  if (TII->AnalyzeBranch(*this, TBB, FBB, Cond))
    return NULL;

  // Avoid bugpoint weirdness: A block may end with a conditional branch but
  // jumps to the same MBB is either case. We have duplicate CFG edges in that
  // case that we can't handle. Since this never happens in properly optimized
  // code, just skip those edges.
  if (TBB && TBB == FBB) {
    DEBUG(dbgs() << "Won't split critical edge after degenerate BB#"
                 << getNumber() << '\n');
    return NULL;
  }

  MachineBasicBlock *NMBB = MF->CreateMachineBasicBlock();
  MF->insert(llvm::next(MachineFunction::iterator(this)), NMBB);
  DEBUG(dbgs() << "Splitting critical edge:"
        " BB#" << getNumber()
        << " -- BB#" << NMBB->getNumber()
        << " -- BB#" << Succ->getNumber() << '\n');

  // On some targets like Mips, branches may kill virtual registers. Make sure
  // that LiveVariables is properly updated after updateTerminator replaces the
  // terminators.
  LiveVariables *LV = P->getAnalysisIfAvailable<LiveVariables>();

  // Collect a list of virtual registers killed by the terminators.
  SmallVector<unsigned, 4> KilledRegs;
  if (LV)
    for (iterator I = getFirstTerminator(), E = end(); I != E; ++I) {
      MachineInstr *MI = I;
      for (MachineInstr::mop_iterator OI = MI->operands_begin(),
           OE = MI->operands_end(); OI != OE; ++OI) {
        if (!OI->isReg() || !OI->isUse() || !OI->isKill() || OI->isUndef())
          continue;
        unsigned Reg = OI->getReg();
        if (TargetRegisterInfo::isVirtualRegister(Reg) &&
            LV->getVarInfo(Reg).removeKill(MI)) {
          KilledRegs.push_back(Reg);
          DEBUG(dbgs() << "Removing terminator kill: " << *MI);
          OI->setIsKill(false);
        }
      }
    }

  ReplaceUsesOfBlockWith(Succ, NMBB);
  updateTerminator();

  // Insert unconditional "jump Succ" instruction in NMBB if necessary.
  NMBB->addSuccessor(Succ);
  if (!NMBB->isLayoutSuccessor(Succ)) {
    Cond.clear();
    MF->getTarget().getInstrInfo()->InsertBranch(*NMBB, Succ, NULL, Cond, dl);
  }

  // Fix PHI nodes in Succ so they refer to NMBB instead of this
  for (MachineBasicBlock::iterator i = Succ->begin(), e = Succ->end();
       i != e && i->isPHI(); ++i)
    for (unsigned ni = 1, ne = i->getNumOperands(); ni != ne; ni += 2)
      if (i->getOperand(ni+1).getMBB() == this)
        i->getOperand(ni+1).setMBB(NMBB);

  // Inherit live-ins from the successor
  for (MachineBasicBlock::livein_iterator I = Succ->livein_begin(),
	 E = Succ->livein_end(); I != E; ++I)
    NMBB->addLiveIn(*I);

  // Update LiveVariables.
  if (LV) {
    // Restore kills of virtual registers that were killed by the terminators.
    while (!KilledRegs.empty()) {
      unsigned Reg = KilledRegs.pop_back_val();
      for (iterator I = end(), E = begin(); I != E;) {
        if (!(--I)->addRegisterKilled(Reg, NULL, /* addIfNotFound= */ false))
          continue;
        LV->getVarInfo(Reg).Kills.push_back(I);
        DEBUG(dbgs() << "Restored terminator kill: " << *I);
        break;
      }
    }
    // Update relevant live-through information.
    LV->addNewBlock(NMBB, this, Succ);
  }

  if (MachineDominatorTree *MDT =
      P->getAnalysisIfAvailable<MachineDominatorTree>()) {
    // Update dominator information.
    MachineDomTreeNode *SucccDTNode = MDT->getNode(Succ);

    bool IsNewIDom = true;
    for (const_pred_iterator PI = Succ->pred_begin(), E = Succ->pred_end();
//.........这里部分代码省略.........