当前位置: 首页>>代码示例>>C++>>正文

C++ LiquidCrystal_I2C::home方法代码示例

本文整理汇总了C++中LiquidCrystal_I2C::home方法的典型用法代码示例。如果您正苦于以下问题：C++ LiquidCrystal_I2C::home方法的具体用法？C++ LiquidCrystal_I2C::home怎么用？C++ LiquidCrystal_I2C::home使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类LiquidCrystal_I2C的用法示例。


在下文中一共展示了LiquidCrystal_I2C::home方法的9个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: setSource

void setSource(int sourc){

	source = sourc;
	int sourceID = 0;
    lcd.home();                   // go home
	lcd.setCursor(0,1);
	
	if( source == 0){
       sourceID = 0xC7;
       lcd.print("     5.1        ");
    }else if( source == 1){
       sourceID =  0xCB;
       lcd.print("    FM Radio    ");
    }else if( source == 2){
       sourceID =  0xCA;
  	   lcd.print("     AUX 2      ");
    }else if( source == 3){
       sourceID = 0xC9;
	   lcd.print("     AUX 3      ");
    }else if( source == 4){
       sourceID = 0xC8;
	   lcd.print("     AUX 4      ");
    }

	if(sourceID){
	    Wire.beginTransmission(PT2323_ADDRESS);
	  	Wire.write(DEVICE_REG_MODE1);
	  	Wire.write(sourceID);
	  	Wire.endTransmission();
	}


}
开发者ID:avtehnik，项目名称:esp8266-music-box，代码行数:33，代码来源:application.cpp

示例2: echoSerial

void echoSerial(){
 byte index=0;
 char outa[20];
 char outb[20];
 outb[0]='\0';
 boolean foundData=false;
 while (Serial.available() > 0){
   foundData=true;
   if(index < 19){
     outa[index]=Serial.read();
     index++;
     outa[index]= '\0'; 
   }else{ 
     if(index < 39){
       outb[index-20]=Serial.read();
       index++;
       outb[index-20]= '\0';
     }
   }
 }
 if(foundData){
   lcd.clear();
   lcd.home();
   lcd.print(outa);
   lcd.setCursor ( 0, 1 );
   lcd.print(outb);
 }
}
开发者ID:edboel，项目名称:projects，代码行数:28，代码来源:temp_serial1.c

示例3: setup_display

void setup_display(void)
{
	// Switch on the backlight
	//pinMode ( BACKLIGHT_PIN, OUTPUT );
	//digitalWrite ( BACKLIGHT_PIN, HIGH );
	
	lcd.begin(16,2);               // initialize the lcd
	lcd.home();

}
开发者ID:capolan，项目名称:TS0_firmware，代码行数:10，代码来源:Display_tsensor.cpp

示例4: init

void DisplayClass::init()
{
	lcd.begin(20, 4);               // initialize the lcd 
	lcd.home();                   // go home
	lcd.print(F("  WATER DISPENSER"));
	lcd.setCursor(0, 1);
	lcd.print(F("    Version: "VERSION""));
	lcd.setCursor(0, 2);
	lcd.print(F("   INITALIZING..."));
	lcd.setCursor(0, 3);
	lcd.print(F("  Tiago Conceicao"));
}
开发者ID:sn4k3，项目名称:WaterDispenser，代码行数:12，代码来源:Display.cpp

示例5: goSleep

void DisplayClass::goSleep()
{
	lcd.clear();
	lcd.home();
	lcd.print(F("Low Power Mode"));
	lcd.setCursor(0, 1);
	lcd.print(F("Going to sleep in:"));
	lcd.setCursor(0, 2);
	lcd.print(F("3"));
	DELAY_FUNC(333);
	for (uint8_t i = 0; i < 3; i++)
	{
		lcd.print(F("."));
		DELAY_FUNC(333);

	}

	lcd.print(F("2"));
	DELAY_FUNC(333);
	for (uint8_t i = 0; i < 3; i++)
	{
		lcd.print(F("."));
		DELAY_FUNC(333);

	}

	lcd.print(F("1"));
	DELAY_FUNC(333);
	for (uint8_t i = 0; i < 3; i++)
	{
		lcd.print(F("."));
		DELAY_FUNC(333);

	}
	lcd.print(F("0!"));
	DELAY_FUNC(333);

	for (uint8_t i = 0; i < 3; i++)
	{
		noBacklight();
		DELAY_FUNC(500);
		backlight();
		DELAY_FUNC(500);

	}
}
开发者ID:sn4k3，项目名称:WaterDispenser，代码行数:46，代码来源:Display.cpp

示例6: overviewPage

void overviewPage()
{
	lcd.home();

	lcd.print(getTime(tm) + "  " + getDate(tm));

	lcd.setCursor(0,1);
	lcd.print("Temp: ");
	lcd.print(temperature);
	lcd.print("C");

	lcd.setCursor(0, 2);
	lcd.print("Swiatlo: ");
	lcd.print(lightLevel);
	lcd.print(" lx");

	lcd.setCursor(0, 3);
	lcd.print("Cisn: ");
	lcd.print(pressure);
	lcd.print("hPa");
}
开发者ID:Bravo555，项目名称:ArudinoWeatherStation，代码行数:21，代码来源:main.cpp

示例7: setup

void setup()
{
  Serial.begin(9600);
  
  // Switch on the backlight
  pinMode ( BACKLIGHT_PIN, OUTPUT );
  digitalWrite ( BACKLIGHT_PIN, HIGH );
  
  lcd.begin(16,2);               // initialize the lcd 
  sen1.begin();
  sen2.begin();
  sen3.begin();
  sen4.begin();
  sen5.begin();

  lcd.home ();                   // go home
  lcd.print(" getting temps ");  
  lcd.setCursor ( 0, 1 );        // go to the next line
  lcd.print (" init serial   ");
  delay ( 1000 );
  digitalWrite ( BACKLIGHT_PIN, LOW);
  
}
开发者ID:edboel，项目名称:projects，代码行数:23，代码来源:temp_serial1.c

示例8: loop

// The loop function is called in an endless loop
void loop()
{
	switch(b.getState())
	{
	case Button::pressed:		// if press and hold is allowed, the pressed state should not be used
		break;
	case Button::released:
		Serial1.println("Released condition");
		b.resetState();

		Store.Advance();

		break;
	case Button::press_hold:
		Serial1.println("Press and hold condition");

		ForceADCReadout = true;

		switch( Store.getItemState(Store.mIndex) )
		{
		case Item::normal:
			Serial1.println("normal->forced_off");
			Store.setItemState(Store.mIndex, Item::forced_off);
			break;
		case Item::forced_off:
			Serial1.println("forced_off->forced_on");
			Store.setItemState(Store.mIndex, Item::forced_on);
			break;
		case Item::forced_on:
			Serial1.println("forced_on->normal");
			Store.setItemState(Store.mIndex, Item::normal);
			break;
		}
		b.resetState();
		break;
	default:;

	}

	// ADC sampling

	for(int i = 0; i < CHANNEL_COUNT; i++ )
	{
		AdcChannel * ch = &ADCs[i];
		if( ch->isActive() && ( ForceADCReadout || ch->isDue() ))
		{
			Store.temperatureReading(i, ch->getTemperature());
		}
	}
	ForceADCReadout = false;

	// update LCD display if necessary

	if( Store.isAnyActiveChannel() == true )
	{
		if(CurrentIndex != Store.mIndex || Store.getDirty(Store.mIndex))
		{
			CurrentIndex = Store.mIndex;
			lcd.home (); // set cursor to 0,0

			char buf[32];
			float t = Store.getTemperature(Store.mIndex);
			int intPart = t;
			unsigned int fractPart = abs((t - (float)intPart)*10.0);

			sprintf( buf, "CH%d %d.%01dC %s", CurrentIndex + 1, intPart, fractPart, Store.getIsOn(Store.mIndex) ? "ON     " : "OFF    ");
			Store.setDirty(Store.mIndex, false);
			lcd.print( buf );
			lcd.setCursor (0,1);        // go to start of 2nd line

			if( Store.getItemState(Store.mIndex) == Item::forced_off || Store.getItemState(Store.mIndex) == Item::forced_on )
			{
				lcd.print( "FORCED " );
			}
			else
			{
				lcd.print( Store.getLow(Store.mIndex) );
				lcd.print("..");
				lcd.print( Store.getHigh(Store.mIndex) );
				lcd.print("C ");
			}

			// list controlled actuators
			lcd.print("A:");

			for( int i = 0; i < CHANNEL_COUNT; i++ )
			{
				if( Store.getActuators(Store.mIndex) & (1 << i) )
				{
					lcd.print((char)(i + '1'));
				}
			}
			lcd.print("      ");
		}
	}
	else
	{
		lcd.home (); // set cursor to 0,0
		lcd.print("ALL CHANNELS");
//.........这里部分代码省略.........
开发者ID:etxmsol，项目名称:ThermoShield，代码行数:101，代码来源:thermoShield.cpp

示例9: loop

void loop()
{
  sen1.requestTemperatures();
  sen2.requestTemperatures();
  sen3.requestTemperatures();
  sen4.requestTemperatures();
  sen5.requestTemperatures();
  
  echoSerial();
  delay(1000);
  echoSerial();
  delay(1000);
    
  digitalWrite ( BACKLIGHT_PIN, HIGH );
  
  if(sen1.getTempCByIndex(0) < 80){
    tmp1=sen1.getTempCByIndex(0);
  }
  if(sen2.getTempCByIndex(0) < 80){
    tmp2=sen2.getTempCByIndex(0);
  }
  if(sen3.getTempCByIndex(0) < 80){
    tmp3=sen3.getTempCByIndex(0);
  }
  if(sen4.getTempCByIndex(0) < 80){
    tmp4=sen4.getTempCByIndex(0);
  }
  if(sen5.getTempCByIndex(0) < 80){
    tmp5=sen5.getTempCByIndex(0);
  }
  
   lcd.home ();                   // go home
  lcd.print("T1=");  
  lcd.print(tmp1);
  lcd.print(" T2=");
  lcd.print(tmp2);
  lcd.setCursor ( 0, 1 );        // go to the next line
  lcd.print("T3=");
  lcd.print(tmp3);
  lcd.print("  T4=");
  lcd.print(tmp4);
  
  Serial.print(tmp1);
  Serial.print("|");
  Serial.print(tmp2);
  Serial.print("|");
  Serial.print(tmp3);
  Serial.print("|");
  Serial.print(tmp4);
  Serial.print("|");
  Serial.print(tmp5);
  Serial.println(";");
 
  for(int i=0;i<5;i++){
    echoSerial();
    delay(1000);
  }
 
 digitalWrite ( BACKLIGHT_PIN, LOW );
  
}
开发者ID:edboel，项目名称:projects，代码行数:61，代码来源:temp_serial1.c


注：本文中的LiquidCrystal_I2C::home方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。