C++ LLImageJ2C::decodeFailed方法代码示例

BOOL LLImageJ2COJ::decodeImpl(LLImageJ2C &base, LLImageRaw &raw_image, F32 decode_time, S32 first_channel, S32 max_channel_count)
{
	//
	// FIXME: Get the comment field out of the texture
	//

	LLTimer decode_timer;

	opj_dparameters_t parameters;	/* decompression parameters */
	opj_event_mgr_t event_mgr;		/* event manager */
	opj_image_t *image = NULL;

	opj_dinfo_t* dinfo = NULL;	/* handle to a decompressor */
	opj_cio_t *cio = NULL;


	/* configure the event callbacks (not required) */
	memset(&event_mgr, 0, sizeof(opj_event_mgr_t));
	event_mgr.error_handler = error_callback;
	event_mgr.warning_handler = warning_callback;
	event_mgr.info_handler = info_callback;

	/* set decoding parameters to default values */
	opj_set_default_decoder_parameters(&parameters);

	parameters.cp_reduce = base.getRawDiscardLevel();

	/* decode the code-stream */
	/* ---------------------- */

	/* JPEG-2000 codestream */

	/* get a decoder handle */
	dinfo = opj_create_decompress(CODEC_J2K);

	/* catch events using our callbacks and give a local context */
	opj_set_event_mgr((opj_common_ptr)dinfo, &event_mgr, stderr);			

	/* setup the decoder decoding parameters using user parameters */
	opj_setup_decoder(dinfo, &parameters);

	/* open a byte stream */
	cio = opj_cio_open((opj_common_ptr)dinfo, base.getData(), base.getDataSize());

	/* decode the stream and fill the image structure */
	image = opj_decode(dinfo, cio);

	/* close the byte stream */
	opj_cio_close(cio);

	/* free remaining structures */
	if(dinfo)
	{
		opj_destroy_decompress(dinfo);
	}

	// The image decode failed if the return was NULL or the component
	// count was zero.  The latter is just a sanity check before we
	// dereference the array.
	if(!image) 
	{
		LL_DEBUGS("Openjpeg")  << "ERROR -> decodeImpl: failed to decode image - no image" << LL_ENDL;
		return TRUE; // done
	}

	S32 img_components = image->numcomps;

	if( !img_components ) // < 1 ||img_components > 4 )
	{
		LL_DEBUGS("Openjpeg") << "ERROR -> decodeImpl: failed to decode image wrong number of components: " << img_components << LL_ENDL;
		if (image)
		{
			opj_image_destroy(image);
		}

		base.decodeFailed();
		return TRUE; // done
	}

	// sometimes we get bad data out of the cache - check to see if the decode succeeded
	for (S32 i = 0; i < image->numcomps; i++)
	{
		if (image->comps[i].factor != base.getRawDiscardLevel())
		{
			// if we didn't get the discard level we're expecting, fail
			opj_image_destroy(image);
			base.decodeFailed();
			return TRUE;
		}
	}
	
	if(img_components <= first_channel)
	{
		// sanity
		LL_DEBUGS("Openjpeg") << "trying to decode more channels than are present in image: numcomps: " << img_components << " first_channel: " << first_channel << LL_ENDL;
		if (image)
		{
			opj_image_destroy(image);
		}

//.........这里部分代码省略.........

BOOL LLImageJ2COJ::decodeImpl(LLImageJ2C &base, LLImageRaw &raw_image, F32 decode_time, S32 first_channel, S32 max_channel_count)
{
	LLTimer decode_timer;

	/* Extract metadata */
	/* ---------------- */
	U8* c_data = base.getData();
	size_t c_size =  base.getDataSize();
	size_t position = 0;
	
	while (position < 1024 && position < (c_size - 7)) // the comment field should be in the first 1024 bytes.
	{
		if (c_data[position] == 0xff && c_data[position + 1] == 0x64)
		{
			U8 high_byte = c_data[position + 2];
			U8 low_byte = c_data[position + 3];
			S32 c_length = (high_byte * 256) + low_byte; // This size also counts the markers, 00 01 and itself
			if (c_length > 200) // sanity check
			{
				// While comments can be very long, anything longer then 200 is suspect.
				break;
			}
			
			if (position + 2 + c_length > c_size)
			{
				// comment extends past end of data, corruption, or all data not retrived yet.
				break;
			}
			
			// if the comment block does not end at the end of data, check to see if the next
			// block starts with 0xFF
			if (position + 2 + c_length < c_size && c_data[position + 2 + c_length] != 0xff)
			{
				// invalied comment block
				break;
			}
			
			// extract the comment minus the markers, 00 01
			raw_image.mComment.assign((char*)c_data + position + 6, c_length - 4);
			break;
		}
		++position;
	}
	
	opj_dparameters_t parameters;	/* decompression parameters */
	opj_event_mgr_t event_mgr = { };		/* event manager */
	opj_image_t *image = nullptr;

	opj_dinfo_t* dinfo = nullptr;	/* handle to a decompressor */
	opj_cio_t *cio = nullptr;


	/* configure the event callbacks (not required) */
	event_mgr.error_handler = error_callback;
	event_mgr.warning_handler = warning_callback;
	event_mgr.info_handler = info_callback;

	/* set decoding parameters to default values */
	opj_set_default_decoder_parameters(&parameters);

	parameters.cp_reduce = base.getRawDiscardLevel();

	if(parameters.cp_reduce == 0 && *(U16*)(base.getData() + base.getDataSize() - 2) != 0xD9FF)
	{
		bool failed = true;
		for(S32 i = base.getDataSize()-1; i > 42; --i)
		{
			if(base.getData()[i] != 0x00)
			{
				failed = *(U16*)(base.getData()+i-1) != 0xD9FF;
				break;
			}
		}
		if(failed)
		{
			opj_image_destroy(image);
			base.decodeFailed();
			return TRUE;
		}
	}


	/* decode the code-stream */
	/* ---------------------- */

	/* JPEG-2000 codestream */

	/* get a decoder handle */
	dinfo = opj_create_decompress(CODEC_J2K);

	/* catch events using our callbacks and give a local context */
	opj_set_event_mgr((opj_common_ptr)dinfo, &event_mgr, stderr);			

	/* setup the decoder decoding parameters using user parameters */
	opj_setup_decoder(dinfo, &parameters);

	/* open a byte stream */
	cio = opj_cio_open((opj_common_ptr)dinfo, base.getData(), base.getDataSize());

	/* decode the stream and fill the image structure */
//.........这里部分代码省略.........

// Returns TRUE to mean done, whether successful or not.
BOOL LLImageJ2CKDU::decodeImpl(LLImageJ2C &base, LLImageRaw &raw_image, F32 decode_time, S32 first_channel, S32 max_channel_count)
{
	ECodeStreamMode mode = MODE_FAST;

	LLTimer decode_timer;

	if (!mCodeStreamp)
	{
		if (!initDecode(base, raw_image, decode_time, mode, first_channel, max_channel_count))
		{
			// Initializing the J2C decode failed, bail out.
			cleanupCodeStream();
			return TRUE; // done
		}
	}

	// These can probably be grabbed from what's saved in the class.
	kdu_dims dims;
	mCodeStreamp->get_dims(0,dims);

	// Now we are ready to walk through the tiles processing them one-by-one.
	kdu_byte *buffer = raw_image.getData();

	while (mTPosp->y < mTileIndicesp->size.y)
	{
		while (mTPosp->x < mTileIndicesp->size.x)
		{
			try
			{
				if (!mDecodeState)
				{
					kdu_tile tile = mCodeStreamp->open_tile(*(mTPosp)+mTileIndicesp->pos);

					// Find the region of the buffer occupied by this
					// tile.  Note that we have no control over
					// sub-sampling factors which might have been used
					// during compression and so it can happen that tiles
					// (at the image component level) actually have
					// different dimensions.  For this reason, we cannot
					// figure out the buffer region occupied by a tile
					// directly from the tile indices.  Instead, we query
					// the highest resolution of the first tile-component
					// concerning its location and size on the canvas --
					// the `dims' object already holds the location and
					// size of the entire image component on the same
					// canvas coordinate system.  Comparing the two tells
					// us where the current tile is in the buffer.
					S32 channels = base.getComponents() - first_channel;
					if (channels > max_channel_count)
					{
						channels = max_channel_count;
					}
					kdu_resolution res = tile.access_component(0).access_resolution();
					kdu_dims tile_dims; res.get_dims(tile_dims);
					kdu_coords offset = tile_dims.pos - dims.pos;
					int row_gap = channels*dims.size.x; // inter-row separation
					kdu_byte *buf = buffer + offset.y*row_gap + offset.x*channels;
					mDecodeState = new LLKDUDecodeState(tile, buf, row_gap);
				}
				// Do the actual processing
				F32 remaining_time = decode_time - decode_timer.getElapsedTimeF32();
				// This is where we do the actual decode.  If we run out of time, return false.
				if (mDecodeState->processTileDecode(remaining_time, (decode_time > 0.0f)))
				{
					delete mDecodeState;
					mDecodeState = NULL;
				}
				else
				{
					// Not finished decoding yet.
					//					setLastError("Ran out of time while decoding");
					return FALSE;
				}
			}
			catch (const char* msg)
			{
				base.setLastError(ll_safe_string(msg));
				base.decodeFailed();
				cleanupCodeStream();
				return TRUE; // done
			}
			catch (...)
			{
				base.setLastError( "Unknown J2C error" );
				base.decodeFailed();
				cleanupCodeStream();
				return TRUE; // done
			}


			mTPosp->x++;
		}
		mTPosp->y++;
		mTPosp->x = 0;
	}

	cleanupCodeStream();

	return TRUE;
//.........这里部分代码省略.........

BOOL LLImageJ2COJ::decodeImpl(LLImageJ2C &base, LLImageRaw &raw_image, F32 decode_time, S32 first_channel, S32 max_channel_count)
{
	raw_image.decodedComment = LLImageMetaDataReader::ExtractKDUUploadComment(base.getData(), base.getDataSize());

	LLTimer decode_timer;

	opj_dparameters_t parameters;	/* decompression parameters */
	opj_event_mgr_t event_mgr;		/* event manager */
	opj_image_t *image = NULL;

	opj_dinfo_t* dinfo = NULL;	/* handle to a decompressor */
	opj_cio_t *cio = NULL;


	/* configure the event callbacks (not required) */
	memset(&event_mgr, 0, sizeof(opj_event_mgr_t));
	event_mgr.error_handler = error_callback;
	event_mgr.warning_handler = warning_callback;
	event_mgr.info_handler = info_callback;

	/* set decoding parameters to default values */
	opj_set_default_decoder_parameters(&parameters);

	parameters.cp_reduce = base.getRawDiscardLevel();

	/* decode the code-stream */
	/* ---------------------- */

	/* JPEG-2000 codestream */

	/* get a decoder handle */
	dinfo = opj_create_decompress(CODEC_J2K);

	/* catch events using our callbacks and give a local context */
	opj_set_event_mgr((opj_common_ptr)dinfo, &event_mgr, stderr);			

	/* setup the decoder decoding parameters using user parameters */
	opj_setup_decoder(dinfo, &parameters);

	/* open a byte stream */
	cio = opj_cio_open((opj_common_ptr)dinfo, base.getData(), base.getDataSize());

	/* decode the stream and fill the image structure.
	   Also fill in an additional structur to get the decoding result.
	   This structure is a bit unusual in that it is not received through
	   opj, but still has somt dynamically allocated fields that need to
	   be cleared up at the end by calling a destroy function. */
	opj_codestream_info_t cinfo;
	memset(&cinfo, 0, sizeof(opj_codestream_info_t));
	image = opj_decode_with_info(dinfo, cio, &cinfo);

	/* close the byte stream */
	opj_cio_close(cio);

	/* free remaining structures */
	if(dinfo)
	{
		opj_destroy_decompress(dinfo);
	}

	// The image decode failed if the return was NULL or the component
	// count was zero.  The latter is just a sanity check before we
	// dereference the array.
	if(!image) 
	{
		LL_WARNS ("Openjpeg")  << "Failed to decode image at discard: " << (S32)base.getRawDiscardLevel() << ". No image." << LL_ENDL;
		if (base.getRawDiscardLevel() == 0)
		{
			base.decodeFailed();
		}
		return TRUE; // done
	}

	S32 img_components = image->numcomps;

	if( !img_components ) // < 1 ||img_components > 4 )
	{
		LL_WARNS("Openjpeg") << "Failed to decode image at discard: " << (S32)base.getRawDiscardLevel() << ". Wrong number of components: " << img_components << LL_ENDL;
		if (image)
		{
			opj_destroy_cstr_info(&cinfo);
			opj_image_destroy(image);
		}
		if (base.getRawDiscardLevel() == 0)
		{
			base.decodeFailed();
		}
		return TRUE; // done
	}

	// sometimes we get bad data out of the cache - check to see if the decode succeeded
	int decompdifference = 0;
	if (cinfo.numdecompos) // sanity
	{
		for (int comp = 0; comp < image->numcomps; comp++)
		{	
			/* get maximum decomposition level difference, first
			   field is from the COD header and the second
			   is what is actually met in the codestream, NB: if
			   everything was ok, this calculation will return
//.........这里部分代码省略.........