C++ LLDBCommand::SetExecutable方法代码示例

void LLDBConnector::Start(const LLDBCommand& runCommand)
{
    LLDBCommand startCommand;
    startCommand.SetExecutable( runCommand.GetExecutable() );
    startCommand.SetCommandType( kCommandStart );
    SendCommand( startCommand );

    // stash the runCommand for the future 'Run()' call
    m_runCommand.Clear();
    m_runCommand = runCommand;
    m_runCommand.SetCommandType( kCommandRun );
}

void LLDBPlugin::OnDebugQuickDebug(clDebugEvent& event)
{
#ifdef __WXMSW__
    ::wxMessageBox(
        _("Quick Debug with LLDB is not supported under Windows"), "CodeLite", wxOK | wxCENTER | wxICON_WARNING);
    return;
#endif

    if(!DoInitializeDebugger(event, true)) {
        return;
    }

    LLDBConnectReturnObject retObj;
    LLDBSettings settings;
    settings.Load();
    if(m_connector.Connect(retObj, settings, 5)) {

        // Apply the environment
        EnvSetter env;

        // Get list of breakpoints and add them ( we will apply them later on )
        BreakpointInfo::Vec_t gdbBps;
        m_mgr->GetAllBreakpoints(gdbBps);

        // remove all breakpoints from previous session
        m_connector.DeleteAllBreakpoints();

        // apply the serialized breakpoints
        // In 'Quick Debug' we stop on main
        m_connector.AddBreakpoint("main");
        m_connector.AddBreakpoints(gdbBps);

        LLDBCommand startCommand;
        startCommand.FillEnvFromMemory();
        startCommand.SetExecutable(event.GetExecutableName());
        startCommand.SetCommandArguments(event.GetArguments());
        startCommand.SetWorkingDirectory(event.GetWorkingDirectory());
        startCommand.SetStartupCommands(event.GetStartupCommands());
        startCommand.SetRedirectTTY(m_terminalTTY);
        m_connector.Start(startCommand);
    } else {
        // Failed to connect, notify and perform cleanup
        DoCleanup();
        wxString message;
        message << _("Could not connect to codelite-lldb at '") << m_connector.GetConnectString() << "'";
        ::wxMessageBox(message, "CodeLite", wxICON_ERROR | wxOK | wxCENTER);
        return;
    }
}

void LLDBPlugin::OnDebugCoreFile(clDebugEvent& event)
{
    if(event.GetDebuggerName() != LLDB_DEBUGGER_NAME) {
        event.Skip();
        return;
    }

#ifdef __WXMSW__
    ::wxMessageBox(
        _("Debug core file with LLDB is not supported under Windows"), "CodeLite", wxOK | wxCENTER | wxICON_WARNING);
    return;
#endif

    if(!DoInitializeDebugger(event, false)) {
        return;
    }

    LLDBConnectReturnObject retObj;
    LLDBSettings settings;
    settings.Load();

    if(m_connector.Connect(retObj, settings, 5)) {

        // Apply the environment
        EnvSetter env;

        // remove all breakpoints from previous session
        m_connector.DeleteAllBreakpoints();

        LLDBCommand startCommand;
        startCommand.FillEnvFromMemory();
        startCommand.SetCommandType(kCommandDebugCoreFile);
        startCommand.SetExecutable(event.GetExecutableName());
        startCommand.SetCorefile(event.GetCoreFile());
        startCommand.SetWorkingDirectory(event.GetWorkingDirectory());
        startCommand.SetRedirectTTY(m_terminalTTY);
        m_connector.OpenCoreFile(startCommand);
    } else {
        // Failed to connect, notify and perform cleanup
        DoCleanup();
        wxString message;
        message << _("Could not connect to codelite-lldb at '") << m_connector.GetConnectString() << "'";
        ::wxMessageBox(message, "CodeLite", wxICON_ERROR | wxOK | wxCENTER);
        return;
    }
}

void LLDBConnector::Start(const LLDBCommand& runCommand)
{
    LLDBCommand startCommand;
    startCommand.SetExecutable(runCommand.GetExecutable());
    startCommand.SetCommandType(kCommandStart);
    startCommand.SetWorkingDirectory(runCommand.GetWorkingDirectory());

    // send the settings as well
    LLDBSettings settings;
    settings.Load();
    startCommand.SetSettings(settings);
    SendCommand(startCommand);

    // stash the runCommand for the future 'Run()' call
    m_runCommand.Clear();
    m_runCommand = runCommand;
    m_runCommand.SetCommandType(kCommandRun);
}

//.........这里部分代码省略.........
        }

        // Determine the executable to debug, working directory and arguments
        EnvSetter env(NULL, NULL, pProject ? pProject->GetName() : wxString(), bldConf->GetName());
        wxString exepath = bldConf->GetCommand();
        wxString args;
        wxString workingDirectory;
        // Get the debugging arguments.
        if(bldConf->GetUseSeparateDebugArgs()) {
            args = bldConf->GetDebugArgs();
        } else {
            args = bldConf->GetCommandArguments();
        }

        workingDirectory = ::ExpandVariables(bldConf->GetWorkingDirectory(), pProject, m_mgr->GetActiveEditor());
        exepath = ::ExpandVariables(exepath, pProject, m_mgr->GetActiveEditor());

        {
            DirSaver ds;
            ::wxSetWorkingDirectory(workingDirectory);
            wxFileName execToDebug(exepath);
            if(execToDebug.IsRelative()) { execToDebug.MakeAbsolute(); }

            //////////////////////////////////////////////////////////////////////
            // Launch terminal for IO redirection
            //////////////////////////////////////////////////////////////////////
            TerminateTerminal();

            bool isWindows = wxPlatformInfo::Get().GetOperatingSystemId() & wxOS_WINDOWS;
            if(!bldConf->IsGUIProgram() && !isWindows) {
                m_debuggerTerminal.Launch(clDebuggerTerminalPOSIX::MakeExeTitle(execToDebug.GetFullPath(), args));

                if(m_debuggerTerminal.IsValid()) {
                    CL_DEBUG("Successfully launched terminal %s", m_debuggerTerminal.GetTty());

                } else {
                    // Failed to launch it...
                    DoCleanup();
                    ::wxMessageBox(_("Failed to start terminal for debugger"), "CodeLite",
                                   wxICON_ERROR | wxOK | wxCENTER);
                    return;
                }
            }

            if(!isWindows) { workingDirectory = ::wxGetCwd(); }

            CL_DEBUG("LLDB: Using executable : " + execToDebug.GetFullPath());
            CL_DEBUG("LLDB: Working directory: " + workingDirectory);

            //////////////////////////////////////////////////////////////////////
            // Initiate the connection to codelite-lldb
            //////////////////////////////////////////////////////////////////////

            LLDBConnectReturnObject retObj;
            if(m_connector.Connect(retObj, settings, 5)) {

                // Get list of breakpoints and add them ( we will apply them later on )
                BreakpointInfo::Vec_t gdbBps;
                m_mgr->GetAllBreakpoints(gdbBps);

                // remove all breakpoints from previous session
                m_connector.DeleteAllBreakpoints();

                // apply the serialized breakpoints
                m_connector.AddBreakpoints(gdbBps);

                // Setup pivot folder if needed
                SetupPivotFolder(retObj);

                LLDBCommand startCommand;
                startCommand.FillEnvFromMemory();

                // If the current platform is Windows, use the executable as it appears in the project settings
                startCommand.SetExecutable(isWindows ? exepath : execToDebug.GetFullPath());

                startCommand.SetCommandArguments(args);
                // Since we called 'wxSetWorkingDirectory' earlier, wxGetCwd() should give use the
                // correct working directory for the debugger
                startCommand.SetWorkingDirectory(workingDirectory);
                startCommand.SetRedirectTTY(m_debuggerTerminal.GetTty());
                m_connector.Start(startCommand);

                clDebugEvent cl_event(wxEVT_DEBUG_STARTED);
                EventNotifier::Get()->AddPendingEvent(cl_event);

            } else {
                // Failed to connect, notify and perform cleanup
                DoCleanup();
                wxString message;
                message << _("Could not connect to codelite-lldb at '")
                        << (settings.IsUsingRemoteProxy() ? settings.GetTcpConnectString()
                                                          : m_connector.GetConnectString())
                        << "'";
                ::wxMessageBox(message, "CodeLite", wxICON_ERROR | wxOK | wxCENTER);
                return;
            }
        }
    }
    CL_DEBUG("LLDB: Working directory is restored to: " + ::wxGetCwd());
}