C++ LCD::writeString方法代码示例

本文整理汇总了C++中LCD::writeString方法的典型用法代码示例。如果您正苦于以下问题：C++ LCD::writeString方法的具体用法？C++ LCD::writeString怎么用？C++ LCD::writeString使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类LCD的用法示例。

在下文中一共展示了LCD::writeString方法的10个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: viewSeconds

volatile char viewSeconds(char key, char first)
{
	if(first)
	{
		lcd.cls();
		lcd.writeString(1, 18, TEXT("Clock:"));
		menu.setTitle(TEXT("Clock"));
		menu.setBar(TEXT("TARE"), TEXT("RETURN"));
	}

	lcd.eraseBox(36, 18, 83, 18 + 8);
	/*char x =*/ lcd.writeNumber(83, 18, clock.Seconds(), 'F', 'R');
	lcd.update();

	switch(key)
	{
	   case FL_KEY:
		   clock.tare();
		   break;

	   case FR_KEY:
		   return FN_CANCEL;
	}

	return FN_CONTINUE;
}

开发者ID:dummey，项目名称:TimelapsePlus-Firmware，代码行数:26，代码来源:tlp_menu_functions.cpp

示例2: lighteningTrigger

volatile char lighteningTrigger(char key, char first)
{
	if(first)
	{
		sleepOk = 0;
		hardware_lightening_enable();
		lcd.cls();
		menu.setTitle(TEXT("Lightening"));
		lcd.writeString(25, 20, TEXT("READY"));
		menu.setBar(TEXT("RETURN"), TEXT("CALIBRATE"));
		lcd.update();
	}

	if(key == FL_KEY || key == LEFT_KEY)
	{
		sleepOk = 1;
		hardware_lightening_disable();
		return FN_CANCEL;
	}
	if(key == FR_KEY)
	{
		menu.message(TEXT("Calibrating"));
		hardware_lightening_disable();
	}

	return FN_CONTINUE;
}

开发者ID:dummey，项目名称:TimelapsePlus-Firmware，代码行数:27，代码来源:tlp_menu_functions.cpp

示例3: factoryReset

volatile char factoryReset(char key, char first)
{
	if(first)
	{
		lcd.cls();
		lcd.writeString(14, 12, TEXT("Reset all"));
		lcd.writeString(14, 22, TEXT("settings?"));
		menu.setTitle(TEXT("Reset"));
		menu.setBar(TEXT("CANCEL"), TEXT("RESET"));
		lcd.update();
	}

	switch(key)
	{
	   case FL_KEY:
		    return FN_CANCEL;

	   case FR_KEY:
	   		settings_default();
	   		menu.message(TEXT("Factory Reset"));
		    return FN_CANCEL;
	}

	return FN_CONTINUE;
}

开发者ID:dummey，项目名称:TimelapsePlus-Firmware，代码行数:25，代码来源:tlp_menu_functions.cpp

示例4: notYet

volatile char notYet(char key, char first)
{
	if(first)
	{
		lcd.cls();
		lcd.writeString(3, 7, TEXT("Sorry, this  "));
		lcd.writeString(3, 15, TEXT("feature has  "));
		lcd.writeString(3, 23, TEXT("not yet been "));
		lcd.writeString(3, 31, TEXT("implemented  "));
		menu.setTitle(TEXT("Not Yet"));
		menu.setBar(TEXT("RETURN"), BLANK_STR);
		lcd.update();
	}

	if(key)
		return FN_CANCEL;

	return FN_CONTINUE;
}

开发者ID:dummey，项目名称:TimelapsePlus-Firmware，代码行数:19，代码来源:tlp_menu_functions.cpp

示例5: cableReleaseRemote

volatile char cableReleaseRemote(char key, char first)
{
	static char status; //, cable;

	if(first)
	{
		status = 0;
		lcd.cls();
		menu.setTitle(TEXT("BT Cable Remote"));
		menu.setBar(TEXT("Bulb"), TEXT("Photo"));
		lcd.update();
		remote.set(REMOTE_BULB_END);
	}

	if(key == FL_KEY)
	{
		if(status != 1)
		{
			status = 1;
			lcd.eraseBox(8, 18, 8 + 6 * 11, 26);
			lcd.writeString(8, 18, TEXT("(BULB OPEN)"));
			remote.set(REMOTE_BULB_START);
			lcd.update();
		} else
		{
			status = 0;
			lcd.eraseBox(8, 18, 8 + 6 * 11, 26);
			remote.set(REMOTE_BULB_END);
			lcd.update();
		}
	}
	else if(key == FR_KEY && status != 1)
	{
		status = 0;
		lcd.eraseBox(8, 18, 8 + 6 * 11, 26);
		remote.set(REMOTE_CAPTURE);
		lcd.update();
	}
	else if(key != 0)
	{
		status = 0;
		lcd.eraseBox(8, 18, 8 + 6 * 11, 26);
		remote.set(REMOTE_BULB_END);
		lcd.update();
	}

	if(key == LEFT_KEY || !remote.connected)
	{
		remote.set(REMOTE_BULB_END);
		return FN_CANCEL;
	}
	return FN_CONTINUE;
}

开发者ID:dummey，项目名称:TimelapsePlus-Firmware，代码行数:53，代码来源:tlp_menu_functions.cpp

示例6: memoryFree

volatile char memoryFree(char key, char first)
{
	if(first)
	{
		unsigned int mem = hardware_freeMemory();

		lcd.cls();
		lcd.writeString(1, 18, TEXT("Free RAM:"));
		/*char x =*/lcd.writeNumber(55, 18, mem, 'U', 'L');
		//lcd.writeString(55 + x * 6, 18, TEXT("b"));
		menu.setTitle(TEXT("Memory"));
		menu.setBar(TEXT("RETURN"), BLANK_STR);
		lcd.update();
	}

	if(key == FL_KEY)
		return FN_CANCEL;

	return FN_CONTINUE;
}

开发者ID:dummey，项目名称:TimelapsePlus-Firmware，代码行数:20，代码来源:tlp_menu_functions.cpp

示例7: shutterLagTest

volatile char shutterLagTest(char key, char first)
{
//  static uint8_t cable;
	uint16_t start_lag, end_lag;

	if(first)
	{
//    cable = 0;
		lcd.cls();
		menu.setTitle(TEXT("Shutter Lag Test"));
		menu.setBar(TEXT("Test 1"), TEXT("Test 2 "));
		lcd.update();
	}

	if(key == FL_KEY || key == FR_KEY)
	{
		lcd.eraseBox(10, 18, 80, 38);
		lcd.writeString(10, 18, TEXT("Result:"));

		ENABLE_SHUTTER;
		ENABLE_MIRROR;
		ENABLE_AUX_PORT;

		_delay_ms(100);

		if(key == FR_KEY)
		{
			MIRROR_UP;
			_delay_ms(1000);
		}

		SHUTTER_OPEN;
		clock.tare();

		while(!AUX_INPUT1)
		{
			if(clock.eventMs() >= 1000)
				break;
		}

		start_lag = (uint16_t)clock.eventMs();

		_delay_ms(50);

		SHUTTER_CLOSE;
		clock.tare();

		while(AUX_INPUT1)
		{
			if(clock.eventMs() > 1000)
				break;
		}

		end_lag = (uint16_t)clock.eventMs();

		lcd.writeNumber(56, 18, start_lag, 'U', 'L');
		lcd.writeNumber(56, 28, end_lag, 'U', 'L');

		lcd.update();
	}

	if(key == LEFT_KEY)
		return FN_CANCEL;

	return FN_CONTINUE;
}

开发者ID:dummey，项目名称:TimelapsePlus-Firmware，代码行数:66，代码来源:tlp_menu_functions.cpp

示例8: cableRelease

volatile char cableRelease(char key, char first)
{
	static char status; //, cable;

	if(first)
	{
		status = 0;
		//cable = 0;
		lcd.cls();
		menu.setTitle(TEXT("Cable Remote"));
		menu.setBar(TEXT("Bulb"), TEXT("Photo"));
		lcd.update();
		timer.half();
	}

	if(key == FL_KEY)
	{
		if(status != 1)
		{
			status = 1;
			lcd.eraseBox(8, 18, 8 + 6 * 11, 26);
			lcd.writeString(8, 18, TEXT("(BULB OPEN)"));
			timer.bulbStart();
			lcd.update();
		} else
		{
			status = 0;
			lcd.eraseBox(8, 18, 8 + 6 * 11, 26);
			timer.bulbEnd();
			lcd.update();
		}
	}
	else if(key == FR_KEY && status != 1)
	{
		status = 0;
		lcd.eraseBox(8, 18, 8 + 6 * 11, 26);
		timer.capture();
		lcd.update();
	}
	else if(key != 0)
	{
		status = 0;
		lcd.eraseBox(8, 18, 8 + 6 * 11, 26);
		timer.half();
		lcd.update();
	}
/*
	if(timer.cableIsConnected())
	{
		if(cable == 0)
		{
			cable = 1;
			lcd.writeStringTiny(6, 28, TEXT("Cable Connected"));
			lcd.update();
		}
	}
	else
	{
		if(cable == 1)
		{
			cable = 0;
			lcd.eraseBox(6, 28, 6 + 15 * 5, 36);
			lcd.update();
		}
	}
*/
	if(key == LEFT_KEY)
	{
		timer.off();
		return FN_CANCEL;
	}
	return FN_CONTINUE;
}

开发者ID:dummey，项目名称:TimelapsePlus-Firmware，代码行数:73，代码来源:tlp_menu_functions.cpp

示例9: shutterTest

volatile char shutterTest(char key, char first)
{
	static char status, cable;

	if(first)
	{
		status = 0;
		cable = 0;
		lcd.cls();
		menu.setTitle(TEXT("Shutter Test"));
		menu.setBar(TEXT("Half"), TEXT("Full"));
		lcd.update();
	}

	if(key == FL_KEY && status != 1)
	{
		status = 1;
		lcd.eraseBox(20, 18, 20 + 6 * 6, 26);
		lcd.writeString(20, 18, TEXT("(HALF)"));
		timer.half();
		lcd.update();
	}
	else if(key == FR_KEY && status != 2)
	{
		status = 2;
		lcd.eraseBox(20, 18, 20 + 6 * 6, 26);
		lcd.writeString(20, 18, TEXT("(FULL)"));
		timer.full();
		lcd.update();
	}
	else if(key != 0)
	{
		status = 0;
		lcd.eraseBox(20, 18, 20 + 6 * 6, 26);
		timer.off();
		lcd.update();
	}

	if(timer.cableIsConnected())
	{
		if(cable == 0)
		{
			cable = 1;
			lcd.writeStringTiny(6, 28, TEXT("Cable Connected"));
			lcd.update();
		}
	}
	else
	{
		if(cable == 1)
		{
			cable = 0;
			lcd.eraseBox(6, 28, 6 + 15 * 5, 36);
			lcd.update();
		}
	}

	if(key == LEFT_KEY)
		return FN_CANCEL;

	return FN_CONTINUE;
}

开发者ID:dummey，项目名称:TimelapsePlus-Firmware，代码行数:62，代码来源:tlp_menu_functions.cpp

示例10: usbPlug

volatile char usbPlug(char key, char first)
{
	static char connected = 0;

	if(first || (PTP_Connected != connected) || (PTP_Ready))
	{
		connected = PTP_Connected;
		char exp_name[7];

		if(PTP_Connected)
		{
			if(PTP_Ready)
			{
				lcd.cls();
				lcd.writeString(3, 7,  PTP_CameraModel);
				if(camera.shutterName(exp_name, camera.shutter))
				{
					lcd.writeString(3, 15, exp_name);
				}
				if(camera.apertureName(exp_name, camera.aperture))
				{
					lcd.writeString(3, 23, TEXT("f"));
					lcd.writeString(3+6, 23, exp_name);
				}
				if(camera.isoName(exp_name, camera.iso))
				{
					lcd.writeString(3, 31, TEXT("ISO"));
					lcd.writeString(3+24, 31, exp_name);
				}
				menu.setTitle(TEXT("Camera Info"));
				menu.setBar(TEXT("RETURN"), TEXT("PHOTO"));
				lcd.update();
				connectUSBcamera = 1;

			}
			else
			{
				lcd.cls();
				lcd.writeString(3, 7,  TEXT(" Connected!  "));
				lcd.writeString(3, 15, TEXT(" Retrieving  "));
				lcd.writeString(3, 23, TEXT("   Device    "));
				lcd.writeString(3, 31, TEXT("   Info...   "));
				menu.setTitle(TEXT("Camera Info"));
				menu.setBar(TEXT("RETURN"), BLANK_STR);
				lcd.update();
				connectUSBcamera = 1;

			}
		}
		else
		{
			lcd.cls();
			lcd.writeString(3, 7, TEXT("Plug camera  "));
			lcd.writeString(3, 15, TEXT("into left USB"));
			lcd.writeString(3, 23, TEXT("port...      "));
			lcd.writeString(3, 31, TEXT("             "));
			menu.setTitle(TEXT("Connect USB"));
			menu.setBar(TEXT("CANCEL"), BLANK_STR);
			lcd.update();
			connectUSBcamera = 1;
		}
	}

	if(key == FL_KEY || key == LEFT_KEY)
	{
		if(!PTP_Connected)
			connectUSBcamera = 0;

		return FN_CANCEL;
	}
	else if(key == FR_KEY)
	{
		if(PTP_Ready) camera.capture();
	}
	else if(key == UP_KEY)
	{
		if(PTP_Ready) camera.isoUp(camera.iso);
	}
	else if(key == DOWN_KEY)
	{
		if(PTP_Ready) camera.isoDown(camera.iso);
	}

	return FN_CONTINUE;
}

开发者ID:dummey，项目名称:TimelapsePlus-Firmware，代码行数:85，代码来源:tlp_menu_functions.cpp

注：本文中的LCD::writeString方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。