本文整理汇总了C++中KisImageSP::rootLayer方法的典型用法代码示例。如果您正苦于以下问题:C++ KisImageSP::rootLayer方法的具体用法?C++ KisImageSP::rootLayer怎么用?C++ KisImageSP::rootLayer使用的例子?那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类KisImageSP
的用法示例。
在下文中一共展示了KisImageSP::rootLayer方法的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: testDeferredOffsetInitialization
void KisMaskTest::testDeferredOffsetInitialization()
{
const KoColorSpace * cs = KoColorSpaceRegistry::instance()->rgb8();
KisImageSP image = new KisImage(0, 100, 100, cs, "stest");
KisMaskSP mask = new TestMask;
QCOMPARE(mask->x(), 0);
QCOMPARE(mask->y(), 0);
mask->setX(10);
QCOMPARE(mask->x(), 10);
QCOMPARE(mask->y(), 0);
mask->setY(11);
QCOMPARE(mask->x(), 10);
QCOMPARE(mask->y(), 11);
mask->initSelection(image->rootLayer());
// IMPORTANT: a bit weird behavior, but it is needed for
// KisKraLoadVisitor to work properly
QCOMPARE(mask->x(), 10);
QCOMPARE(mask->y(), 11);
// Now there is no deferred initialization, so the offest
// should simply be reset
mask->initSelection(image->rootLayer());
QCOMPARE(mask->x(), 0);
QCOMPARE(mask->y(), 0);
KisSelectionSP selection = mask->selection();
QCOMPARE(selection->parentNode(), KisNodeSP(mask));
}
示例2: debugObligeChild
void KisAsyncMergerTest::debugObligeChild()
{
const KoColorSpace * colorSpace = KoColorSpaceRegistry::instance()->rgb8();
KisImageSP image = new KisImage(0, 640, 441, colorSpace, "merger test");
QImage sourceImage1(QString(FILES_DATA_DIR) + QDir::separator() + "hakonepa.png");
KisPaintDeviceSP device1 = new KisPaintDevice(colorSpace);
device1->convertFromQImage(sourceImage1, 0, 0, 0);
KisLayerSP paintLayer1 = new KisPaintLayer(image, "paint1", OPACITY_OPAQUE_U8, device1);
KisLayerSP groupLayer = new KisGroupLayer(image, "group", OPACITY_OPAQUE_U8);
image->addNode(groupLayer, image->rootLayer());
image->addNode(paintLayer1, groupLayer);
QRect testRect1(0,0,640,441);
QRect cropRect(image->bounds());
KisMergeWalker walker(cropRect);
KisAsyncMerger merger;
walker.collectRects(paintLayer1, testRect1);
merger.startMerge(walker);
KisLayerSP rootLayer = image->rootLayer();
QVERIFY(rootLayer->original() == groupLayer->projection());
QVERIFY(groupLayer->original() == paintLayer1->projection());
}
示例3: testLayerComposition
void KisImageTest::testLayerComposition()
{
KisImageSP image = new KisImage(0, IMAGE_WIDTH, IMAGE_WIDTH, 0, "layer tests");
QVERIFY(image->rootLayer() != 0);
QVERIFY(image->rootLayer()->firstChild() == 0);
KisLayerSP layer = new KisPaintLayer(image, "layer 1", OPACITY_OPAQUE_U8);
image->addNode(layer);
KisLayerSP layer2 = new KisPaintLayer(image, "layer 2", OPACITY_OPAQUE_U8);
image->addNode(layer2);
QVERIFY(layer->visible());
QVERIFY(layer2->visible());
KisLayerComposition comp(image, "comp 1");
comp.store();
layer2->setVisible(false);
QVERIFY(layer->visible());
QVERIFY(!layer2->visible());
KisLayerComposition comp2(image, "comp 2");
comp2.store();
comp.apply();
QVERIFY(layer->visible());
QVERIFY(layer2->visible());
comp2.apply();
QVERIFY(layer->visible());
QVERIFY(!layer2->visible());
}
示例4: testChecksum
void KisSimpleUpdateQueueTest::testChecksum()
{
QRect imageRect(0,0,512,512);
QRect dirtyRect(100,100,100,100);
const KoColorSpace * colorSpace = KoColorSpaceRegistry::instance()->rgb8();
KisImageSP image = new KisImage(0, imageRect.width(), imageRect.height(), colorSpace, "test");
KisLayerSP paintLayer1 = new KisPaintLayer(image, "paint1", OPACITY_OPAQUE_U8);
KisAdjustmentLayerSP adjustmentLayer = new KisAdjustmentLayer(image, "adj", 0, 0);
image->lock();
image->addNode(paintLayer1, image->rootLayer());
image->addNode(adjustmentLayer, image->rootLayer());
image->unlock();
KisFilterSP filter = KisFilterRegistry::instance()->value("blur");
Q_ASSERT(filter);
KisFilterConfiguration *configuration = filter->defaultConfiguration(0);
KisTestableSimpleUpdateQueue queue;
KisWalkersList& walkersList = queue.getWalkersList();
{
TestUtil::LodOverride l(1, image);
queue.addUpdateJob(adjustmentLayer, dirtyRect, imageRect, 1);
QCOMPARE(walkersList[0]->checksumValid(), true);
QCOMPARE(walkersList[0]->levelOfDetail(), 1);
}
adjustmentLayer->setFilter(configuration);
{
TestUtil::LodOverride l(1, image);
QCOMPARE(walkersList[0]->checksumValid(), false);
}
QVector<KisUpdateJobItem*> jobs;
KisTestableUpdaterContext context(2);
{
TestUtil::LodOverride l(1, image);
queue.processQueue(context);
}
jobs = context.getJobs();
{
TestUtil::LodOverride l(1, image);
QCOMPARE(jobs[0]->walker()->checksumValid(), true);
}
}
示例5: layerTests
void KisImageTest::layerTests()
{
KisImageSP image = new KisImage(0, IMAGE_WIDTH, IMAGE_WIDTH, 0, "layer tests");
QVERIFY(image->rootLayer() != 0);
QVERIFY(image->rootLayer()->firstChild() == 0);
KisLayerSP layer = new KisPaintLayer(image, "layer 1", OPACITY_OPAQUE_U8);
image->addNode(layer);
QVERIFY(image->rootLayer()->firstChild()->objectName() == layer->objectName());
}
示例6: testGatherLayers
void KisGmicTests::testGatherLayers()
{
const KoColorSpace * colorSpace = KoColorSpaceRegistry::instance()->rgb8();
QImage background(QString(FILES_DATA_DIR) + QDir::separator() + "00_BG.png");
QImage colorMarks(QString(FILES_DATA_DIR) + QDir::separator() + "01_ColorMarks.png");
QImage artLine(QString(FILES_DATA_DIR) + QDir::separator() + "02_Artline.png");
KisImageSP image = new KisImage(0, 2408, 3508, colorSpace, "filter test");
KisPaintDeviceSP device1 = new KisPaintDevice(colorSpace);
KisPaintDeviceSP device2 = new KisPaintDevice(colorSpace);
KisPaintDeviceSP device3 = new KisPaintDevice(colorSpace);
device1->convertFromQImage(background, 0, 0, 0);
device2->convertFromQImage(colorMarks, 0, 0, 0);
device3->convertFromQImage(artLine, 0, 0, 0);
KisLayerSP paintLayer1 = new KisPaintLayer(image, "background", OPACITY_OPAQUE_U8, device1);
KisLayerSP paintLayer2 = new KisPaintLayer(image, "colorMarks", OPACITY_OPAQUE_U8, device2);
KisLayerSP paintLayer3 = new KisPaintLayer(image, "artLine", OPACITY_OPAQUE_U8, device3);
image->addNode(paintLayer1, image->rootLayer());
image->addNode(paintLayer2, image->rootLayer());
image->addNode(paintLayer3, image->rootLayer());
KisNodeSP activeNode = static_cast<KisNodeSP>(paintLayer2);
KisNodeListSP result;
KisInputOutputMapper mapper(image, activeNode);
result = mapper.inputNodes(ACTIVE_LAYER);
QCOMPARE(result->at(0)->name(), activeNode->name());
result = mapper.inputNodes(ACTIVE_LAYER_ABOVE_LAYER);
QCOMPARE(result->size(), 2);
QCOMPARE(result->at(0)->name(), activeNode->name());
QCOMPARE(result->at(1)->name(), paintLayer3->name());
result = mapper.inputNodes(ACTIVE_LAYER_BELOW_LAYER);
QCOMPARE(result->size(), 2);
QCOMPARE(result->at(0)->name(), activeNode->name());
QCOMPARE(result->at(1)->name(), paintLayer1->name());
result = mapper.inputNodes(ALL_LAYERS);
QCOMPARE(result->size(), 3);
QCOMPARE(result->at(0)->name(), paintLayer3->name());
QCOMPARE(result->at(1)->name(), paintLayer2->name());
QCOMPARE(result->at(2)->name(), paintLayer1->name());
}
示例7: run
void KisPasteNewActionFactory::run(KisViewManager *viewManager)
{
Q_UNUSED(viewManager);
KisPaintDeviceSP clip = KisClipboard::instance()->clip(QRect(), true);
if (!clip) return;
QRect rect = clip->exactBounds();
if (rect.isEmpty()) return;
KisDocument *doc = KisPart::instance()->createDocument();
KisImageSP image = new KisImage(doc->createUndoStore(),
rect.width(),
rect.height(),
clip->colorSpace(),
i18n("Pasted"));
KisPaintLayerSP layer =
new KisPaintLayer(image.data(), clip->objectName(),
OPACITY_OPAQUE_U8, clip->colorSpace());
KisPainter::copyAreaOptimized(QPoint(), clip, layer->paintDevice(), rect);
image->addNode(layer.data(), image->rootLayer());
doc->setCurrentImage(image);
KisPart::instance()->addDocument(doc);
KisMainWindow *win = viewManager->mainWindow();
win->addViewAndNotifyLoadingCompleted(doc);
}
示例8: testRecursiveProcessing
void KisProcessingApplicatorTest::testRecursiveProcessing()
{
KisSurrogateUndoStore *undoStore = new KisSurrogateUndoStore();
KisPaintLayerSP paintLayer1;
KisPaintLayerSP paintLayer2;
KisImageSP image = createImage(undoStore, paintLayer1, paintLayer2);
QRect cropRect1(40,40,86,86);
QVERIFY(checkLayers(image, "recursive_initial"));
{
KisProcessingApplicator applicator(image, image->rootLayer(),
KisProcessingApplicator::RECURSIVE);
KisProcessingVisitorSP visitor =
new KisCropProcessingVisitor(cropRect1, true, true);
applicator.applyVisitor(visitor);
applicator.end();
image->waitForDone();
}
QVERIFY(checkLayers(image, "recursive_crop"));
undoStore->undo();
image->waitForDone();
QVERIFY(checkLayers(image, "recursive_initial"));
}
示例9: testNoUIUpdates
void KisProcessingApplicatorTest::testNoUIUpdates()
{
KisSurrogateUndoStore *undoStore = new KisSurrogateUndoStore();
KisPaintLayerSP paintLayer1;
KisPaintLayerSP paintLayer2;
KisImageSP image = createImage(undoStore, paintLayer1, paintLayer2);
QSignalSpy uiSignalsCounter(image.data(), SIGNAL(sigImageUpdated(const QRect&)));
QRect cropRect1(40,40,86,86);
{
KisProcessingApplicator applicator(image, image->rootLayer(),
KisProcessingApplicator::RECURSIVE |
KisProcessingApplicator::NO_UI_UPDATES);
KisProcessingVisitorSP visitor =
new KisCropProcessingVisitor(cropRect1, true, true);
applicator.applyVisitor(visitor);
applicator.end();
image->waitForDone();
}
QCOMPARE(uiSignalsCounter.size(), 0);
uiSignalsCounter.clear();
undoStore->undo();
image->waitForDone();
QCOMPARE(uiSignalsCounter.size(), 0);
}
示例10: testMoveLayer
void KisLayerTest::testMoveLayer()
{
const KoColorSpace * colorSpace = KoColorSpaceRegistry::instance()->colorSpace("RGBA", 0);
KisImageSP image = new KisImage(0, 512, 512, colorSpace, "layer test");
KisLayerSP node1 = new TestLayer(image, "layer1", OPACITY_OPAQUE);
KisLayerSP node2 = new TestLayer(image, "layer2", OPACITY_OPAQUE);
KisLayerSP node3 = new TestLayer(image, "layer3", OPACITY_OPAQUE);
node1->setName("node1");
node2->setName("node2");
node3->setName("node3");
QVERIFY(image->addNode(node1));
QVERIFY(image->addNode(node2));
QVERIFY(image->addNode(node3));
QVERIFY(image->root()->at(0) == node1.data());
QVERIFY(image->root()->at(1) == node2.data());
QVERIFY(image->root()->at(2) == node3.data());
QVERIFY(image->moveNode(node3, image->rootLayer(), node1));
QVERIFY(image->root()->at(0) == node1.data());
QVERIFY(image->root()->at(1) == node3.data());
QVERIFY(image->root()->at(2) == node2.data());
}
示例11: testScalingUndeferredSmoothing
void KisPrescaledProjectionTest::testScalingUndeferredSmoothing()
{
// Set up a nice image
QImage qimage(QString(FILES_DATA_DIR) + QDir::separator() + "lena.png");
// Undo adapter not necessary
const KoColorSpace * cs = KoColorSpaceRegistry::instance()->rgb8();
KisImageSP image = new KisImage(0, qimage.width(), qimage.height(), cs, "projection test");
// 300 dpi recalculated to pixels per point (of which there are 72
// to the inch)
image->setResolution(100, 100);
KisPaintLayerSP layer = new KisPaintLayer(image, "test", OPACITY_OPAQUE_U8, cs);
image->addNode(layer.data(), image->rootLayer(), 0);
layer->paintDevice()->convertFromQImage(qimage, 0);
KisPrescaledProjection projection;
KisCoordinatesConverter converter;
converter.setImage(image);
projection.setCoordinatesConverter(&converter);
projection.setMonitorProfile(0,
KoColorConversionTransformation::internalRenderingIntent(),
KoColorConversionTransformation::internalConversionFlags());
projection.setImage(image);
testProjectionScenario(projection, &converter, "120dpi");
}
示例12: run
void KisPasteNewActionFactory::run(KisView2 *view)
{
Q_UNUSED(view);
KisPaintDeviceSP clip = KisClipboard::instance()->clip(QRect(), true);
if (!clip) return;
QRect rect = clip->exactBounds();
if (rect.isEmpty()) return;
KisDoc2 *doc = new KisDoc2();
if (!doc) return;
KisImageSP image = new KisImage(doc->createUndoStore(),
rect.width(),
rect.height(),
clip->colorSpace(),
i18n("Pasted"));
KisPaintLayerSP layer =
new KisPaintLayer(image.data(), clip->objectName(),
OPACITY_OPAQUE_U8, clip->colorSpace());
KisPainter p(layer->paintDevice());
p.setCompositeOp(COMPOSITE_COPY);
p.bitBlt(0, 0, clip, rect.x(), rect.y(), rect.width(), rect.height());
p.end();
image->addNode(layer.data(), image->rootLayer());
doc->setCurrentImage(image);
KoMainWindow *win = doc->documentPart()->createMainWindow();
win->show();
win->setRootDocument(doc);
}
示例13: KisResourcesSnapshot
QImage utils::StrokeTester::doStroke(bool cancelled,
bool indirectPainting,
bool externalLayer,
bool testUpdates,
bool needQImage)
{
KisImageSP image = utils::createImage(0, m_imageSize);
KoCanvasResourceManager *manager = utils::createResourceManager(image, 0, m_presetFilename);
KisNodeSP currentNode;
for (int i = 0; i < m_numIterations; i++) {
modifyResourceManager(manager, image, i);
KisPainter *painter = new KisPainter();
KisResourcesSnapshotSP resources =
new KisResourcesSnapshot(image,
image->rootLayer()->firstChild(),
image->postExecutionUndoAdapter(),
manager);
if(externalLayer) {
KisNodeSP externalNode = new KisPaintLayer(0, "extlyr", OPACITY_OPAQUE_U8, image->colorSpace());
resources->setCurrentNode(externalNode);
Q_ASSERT(resources->currentNode() == externalNode);
}
initImage(image, resources->currentNode(), i);
KisStrokeStrategy *stroke = createStroke(indirectPainting, resources, painter, image);
m_strokeId = image->startStroke(stroke);
addPaintingJobs(image, resources, painter, i);
if(!cancelled) {
image->endStroke(m_strokeId);
}
else {
image->cancelStroke(m_strokeId);
}
image->waitForDone();
currentNode = resources->currentNode();
}
QImage resultImage;
if(needQImage) {
KisPaintDeviceSP device = testUpdates ?
image->projection() :
currentNode->paintDevice();
resultImage = device->convertToQImage(0, 0, 0, image->width(), image->height());
}
image = 0;
delete manager;
return resultImage;
}
示例14: benchmarkUpdate
void KisPrescaledProjectionTest::benchmarkUpdate()
{
QImage referenceImage(QString(FILES_DATA_DIR) + QDir::separator() + "lena.png");
QRect imageRect = QRect(QPoint(0,0), referenceImage.size());
const KoColorSpace * cs = KoColorSpaceRegistry::instance()->rgb8();
KisImageSP image = new KisImage(0, imageRect.width(), imageRect.height(), cs, "projection test");
// set up 300dpi
image->setResolution(300 / 72 , 300 / 72);
KisPaintLayerSP layer = new KisPaintLayer(image, "paint1", OPACITY_OPAQUE_U8, cs);
layer->paintDevice()->convertFromQImage(referenceImage, 0);
image->addNode(layer, image->rootLayer(), 0);
KisPrescaledProjection projection;
KisCoordinatesConverter converter;
converter.setImage(image);
projection.setCoordinatesConverter(&converter);
projection.setMonitorProfile(0,
KoColorConversionTransformation::internalRenderingIntent(),
KoColorConversionTransformation::internalConversionFlags());
projection.setImage(image);
// Emulate "Use same aspect as pixels"
converter.setResolution(image->xRes(), image->yRes());
converter.setZoom(1.0);
KisUpdateInfoSP info = projection.updateCache(image->bounds());
projection.recalculateCache(info);
QCOMPARE(imageRect, QRect(0,0,512,512));
QRect dirtyRect(0,0,20,20);
const qint32 numShifts = 25;
const QPoint offset(dirtyRect.width(),dirtyRect.height());
//CALLGRIND_START_INSTRUMENTATION;
QBENCHMARK {
for(qint32 i = 0; i < numShifts; i++) {
KisUpdateInfoSP tempInfo = projection.updateCache(dirtyRect);
projection.recalculateCache(tempInfo);
dirtyRect.translate(offset);
}
}
//CALLGRIND_STOP_INSTRUMENTATION;
}
示例15: addLayers
void addLayers(const QVector<Layer> &layers, KisImageSP image, int depth)
{
for(int i = 0; i < layers.size(); i++) {
const Layer &layer = layers[i];
if (layer.depth == depth) {
KisGroupLayerSP group = (depth == 0 ? image->rootLayer() : findGroup(layers, layer, i));
image->addNode(layer.layer, group);
if (layer.mask) {
image->addNode(layer.mask, layer.layer);
}
}
}
}