C++ KWDocument::addFrameSet方法代码示例

void TestPageCommands::testInsertPageCommand() // move of frames
{
    KWDocument document;
    KWPageInsertCommand command1(&document, 0);
    QCOMPARE(document.pageCount(), 0);
    QCOMPARE(document.frameSetCount(), 0);
    command1.redo();
    QCOMPARE(document.pageCount(), 1);
    QCOMPARE(document.frameSetCount(), 0);

    KWFrameSet *fs = new KWFrameSet();
    MockShape *shape = new MockShape();
    KWFrame *frame = new KWFrame(shape, fs);
    Q_UNUSED(frame);
    document.addFrameSet(fs);
    QPointF startPos = shape->position();

    KWPageInsertCommand command2(&document, 0);
    QCOMPARE(document.pageCount(), 1);
    QCOMPARE(document.frameSetCount(), 1);
    command2.redo();
    QCOMPARE(document.pageCount(), 2);
    QCOMPARE(document.frameSetCount(), 1);
    QCOMPARE(fs->frameCount(), 1);
    QCOMPARE(command2.page().pageNumber(), 1);
    QCOMPARE(command1.page().pageNumber(), 2);
    QPointF newPos = shape->position();
    QCOMPARE(newPos, QPointF(0, command2.page().height()) + startPos); // it moved ;)

    KWPageInsertCommand command3(&document, 2);
    command3.redo();
    QCOMPARE(document.pageCount(), 3);
    QCOMPARE(document.frameSetCount(), 1);
    QCOMPARE(fs->frameCount(), 1);
    QCOMPARE(newPos, shape->position()); // it has not moved from page 2

    command3.undo();
    QCOMPARE(document.pageCount(), 2);
    QCOMPARE(document.frameSetCount(), 1);
    QCOMPARE(fs->frameCount(), 1);
    QCOMPARE(newPos, shape->position()); // it has not moved from page 2
    QCOMPARE(command2.page().pageNumber(), 1);
    QCOMPARE(command1.page().pageNumber(), 2);

    command2.undo();
    QCOMPARE(document.pageCount(), 1);
    QCOMPARE(document.frameSetCount(), 1);
    QCOMPARE(fs->frameCount(), 1);
    QCOMPARE(command1.page().pageNumber(), 1);
    QCOMPARE(startPos, shape->position()); // it has been moved back

    command2.redo();
    QCOMPARE(document.pageCount(), 2);
    QCOMPARE(document.frameSetCount(), 1);
    QCOMPARE(fs->frameCount(), 1);
    QCOMPARE(command2.page().pageNumber(), 1);
    QCOMPARE(command1.page().pageNumber(), 2);
    QCOMPARE(QPointF(0, command2.page().height()) + startPos, newPos); // it moved again ;)
}

void TestPageCommands::testRemovePageCommand4() // auto remove of frames
{
    KWDocument document;
    KWPageInsertCommand insertCommand(&document, 0);
    insertCommand.redo();

    KWFrameSet *fs = new KWFrameSet();
    document.addFrameSet(fs);
    MockShape *shape1 = new MockShape();
    new KWFrame(shape1, fs);

    KWTextFrameSet *tfs = new KWTextFrameSet(&document, Words::MainTextFrameSet);
    document.addFrameSet(tfs);
    MockShape *shape2 = new MockShape();
    shape2->setUserData(new KoTextShapeData());
    new KWTextFrame(shape2, tfs);

    KWTextFrameSet *header = new KWTextFrameSet(&document, Words::EvenPagesHeaderTextFrameSet);
    document.addFrameSet(header);
    MockShape *shape3 = new MockShape();
    shape3->setUserData(new KoTextShapeData());
    new KWTextFrame(shape3, header);

    KWPageRemoveCommand command(&document, insertCommand.page());
    QCOMPARE(document.frameSetCount(), 3);
    command.redo();

    QCOMPARE(document.frameSetCount(), 2); // only the main&header framesets are left
    QVERIFY(document.frameSets().contains(tfs));
    QVERIFY(document.frameSets().contains(header));
    QCOMPARE(fs->frameCount(), 0);
    QCOMPARE(tfs->frameCount(), 0);
    QCOMPARE(header->frameCount(), 0);

    command.undo();

    QCOMPARE(document.frameSetCount(), 3);
    QCOMPARE(fs->frameCount(), 1);
    QCOMPARE(tfs->frameCount(), 0); // doesn't get auto-added
    QCOMPARE(header->frameCount(), 0); // doesn't get auto-added
}

void TestPageCommands::testInsertPageCommand2() // auto remove of frames
{
    KWDocument document;
    KWFrameSet *fs = new KWFrameSet();
    document.addFrameSet(fs);
    KWTextFrameSet *tfs = new KWTextFrameSet(&document, Words::MainTextFrameSet);
    document.addFrameSet(tfs);

    KWPageInsertCommand command1(&document, 0);
    command1.redo();

    MockShape *shape1 = new MockShape();
    new KWFrame(shape1, fs);

    MockShape *shape2 = new MockShape();
    shape2->setUserData(new KoTextShapeData());
    new KWTextFrame(shape2, tfs);

    KWPageInsertCommand command2(&document, 1); // append a page
    command2.redo();
    QCOMPARE(document.pageCount(), 2);
    QCOMPARE(document.frameSetCount(), 2);
    QCOMPARE(fs->frameCount(), 1);
    QCOMPARE(tfs->frameCount(), 1);

    // add a new frame for the page we just created.
    MockShape *shape3 = new MockShape();
    QPointF position(30, command2.page().offsetInDocument());
    shape3->setPosition(position);
    new KWTextFrame(shape3, tfs);
    QCOMPARE(tfs->frameCount(), 2);

    command2.undo(); // remove the page again.
    QCOMPARE(document.pageCount(), 1);
    QCOMPARE(document.frameSetCount(), 2);
    QCOMPARE(fs->frameCount(), 1);
    QCOMPARE(tfs->frameCount(), 1); // the text frame is an auto-generated one, so it should be removed.
}

void TestPageCommands::testPageSpread()
{
    // setup a doc with multiple pages like;
    //   1: S1, 2: S1, 3: S1, 4: S2, 5: S1, 6:S2, 7: S2

    KWDocument document;
    KWPageManager *manager = document.pageManager();

    KWPageStyle style("pagestyle1");
    KoPageLayout lay = style.pageLayout();
    lay.width = 300;
    lay.height = 500;
    style.setPageLayout(lay);

    KWPageStyle style2("pagestyle2");
    lay = style.pageLayout();
    lay.width = 400;
    lay.height = 400;
    style2.setPageLayout(lay);
    KWPage p1 = manager->appendPage(style);
    KWPage p2 = manager->appendPage(style);
    KWPage p3 = manager->appendPage(style);
    KWPage p4 = manager->appendPage(style2);
    KWPage p5 = manager->appendPage(style);
    KWPage p6 = manager->appendPage(style2);
    KWPage p7 = manager->appendPage(style2);

    KWFrameSet *fs = new KWFrameSet();
    for (int i = 1; i <= manager->pageCount(); ++i) {
        // create one frame per page. Positioned relative to the top of the page.
        KWPage page = manager->page(i);
        QVERIFY(page.isValid());
        MockShape *shape = new MockShape();
        new KWFrame(shape, fs);
        shape->setPosition(QPointF(-10, page.offsetInDocument() + 10));
    }
    document.addFrameSet(fs);

    // when changing S1 from normal to pagespread I expect
    //  page 1 to stay the same.
    //  page 2 to become a pagespread
    //  page 3 to be deleted
    //  page 4 to stay the same.
    //  page 5 to become a page spread and gets pageNumber 6
    //  page 6 to become page 7 and become a Right page
    //  page 7 to become page 8 and become a Left page
    //  there will be a new KWPage for page 5
    // all frames to be moved so they are still at the same relative location
    // to their original page' top

    KWPageStyle style3("dummy");
    lay.leftMargin = -1;
    lay.rightMargin = -1;
    lay.pageEdge = 7;
    lay.bindingSide = 13;
    style2.setPageLayout(lay);
    KWPageStylePropertiesCommand cmd(&document, style, style3);
    cmd.redo();

    QCOMPARE(manager->pageCount(), 7);
QEXPECT_FAIL("", "Not done yet", Abort);
    QCOMPARE(p1.height(), 500.);
    QCOMPARE(p1.width(), 300.);
    QCOMPARE(p1.pageSide(), KWPage::Right);
    QCOMPARE(p1.pageNumber(), 1);
    QCOMPARE(p2.height(), 500.);
    QCOMPARE(p2.width(), 600.);
    QCOMPARE(p2.pageSide(), KWPage::PageSpread);
    QCOMPARE(p2.pageNumber(), 2);
    QVERIFY(!p3.isValid());
    QCOMPARE(p4.pageSide(), KWPage::Left);
    QCOMPARE(p4.width(), 300.);
    QCOMPARE(p4.height(), 500.);
    QCOMPARE(p4.pageNumber(), 4);
    QCOMPARE(p5.width(), 600.);
    QCOMPARE(p5.height(), 500.);
    QCOMPARE(p5.pageSide(), KWPage::PageSpread);
    QCOMPARE(p5.pageNumber(), 6);
    QCOMPARE(p6.pageSide(), KWPage::Right);
    QCOMPARE(p6.width(), 400.);
    QCOMPARE(p6.pageNumber(), 7);
    QCOMPARE(p7.pageSide(), KWPage::Left);
    QCOMPARE(p7.width(), 400.);
    QCOMPARE(p7.pageNumber(), 8);

    KWPage newPage5 = manager->page(5);
    QCOMPARE(newPage5.pageStyle(), style);
    QCOMPARE(newPage5.width(), 400.);
    QCOMPARE(newPage5.height(), 400.);
    QCOMPARE(newPage5.pageSide(), KWPage::Left);

    QCOMPARE(fs->frames()[0]->shape()->position(), QPointF(-10, 10));
    // TODO figure out what the actual numbers should be below
    QCOMPARE(fs->frames()[1]->shape()->position(), QPointF(-10, 10));
    QCOMPARE(fs->frames()[2]->shape()->position(), QPointF(-10, 10));
    QCOMPARE(fs->frames()[3]->shape()->position(), QPointF(-10, 10));
    QCOMPARE(fs->frames()[4]->shape()->position(), QPointF(-10, 10));
    QCOMPARE(fs->frames()[5]->shape()->position(), QPointF(-10, 10));
    QCOMPARE(fs->frames()[6]->shape()->position(), QPointF(-10, 10));
}

void TestPageCommands::testPageStylePropertiesCommand2()
{
    /*
      make setup where multiple, interspaced pages use the style we want to change.
      add some frames.
      check if the frames moved properly when the page gets a new size
      check that all pages got their new size
      check that the name of the style did not change
    */
    KWDocument document;
    KWPageManager *manager = document.pageManager();

    KWPageStyle style("pagestyle1");
    KoPageLayout lay = style.pageLayout();
    lay.width = 300;
    lay.height = 500;
    style.setPageLayout(lay);

    KWPageStyle style2("pagestyle2");
    lay = style.pageLayout();
    lay.width = 400;
    lay.height = 400;
    style2.setPageLayout(lay);
    KWPage p1 = manager->appendPage(style2);
    KWPage p2 = manager->appendPage(style);
    KWPage p3 = manager->appendPage(style);
    KWPage p4 = manager->appendPage(style2);
    KWPage p5 = manager->appendPage(style2);
    KWPage p6 = manager->appendPage(style);
    KWPage p7 = manager->appendPage(style);
    KWPage p8 = manager->appendPage(style);
    KWPage p9 = manager->appendPage(style2);
    QCOMPARE(manager->pageCount(), 9);

    KWFrameSet *fs = new KWFrameSet();
    for (int i = 1; i <= manager->pageCount(); ++i) {
        // create one frame per page. Positioned relative to the top of the page.
        KWPage page = manager->page(i);
        QVERIFY(page.isValid());
        MockShape *shape = new MockShape();
        new KWFrame(shape, fs);
        shape->setPosition(QPointF(-10, page.offsetInDocument() + 10));
    }
    document.addFrameSet(fs);

    // lets prepare to change the style to a new page size.
    KWPageStyle newStyle("foo");
    lay = newStyle.pageLayout();
    lay.width = 350;
    lay.height = 1000;
    newStyle.setPageLayout(lay);

    KWPageStylePropertiesCommand command(&document, style, newStyle);

    // nothing happens in constructor before redo;
    for (int i = 1; i <= manager->pageCount(); ++i) {
        KWPage page = manager->page(i);
        QVERIFY(page.height() <= 500); // not 1000 yet
        QVERIFY(page.isValid());
        KoShape *shape = fs->frames().at(i-1)->shape();
        QCOMPARE(shape->position(), QPointF(-10, page.offsetInDocument() + 10));
    }

    const qreal lastPageOffset = p9.offsetInDocument();

    command.redo();
    QCOMPARE(manager->pageCount(), 9);
    QCOMPARE(p1.height(), 400.);
    QCOMPARE(p4.height(), 400.);
    QCOMPARE(p5.height(), 400.);
    QCOMPARE(p9.height(), 400.);
    QCOMPARE(p2.height(), 1000.);
    QCOMPARE(p3.height(), 1000.);
    QCOMPARE(p6.height(), 1000.);
    QCOMPARE(p7.height(), 1000.);
    QCOMPARE(p8.height(), 1000.);
    QCOMPARE(lastPageOffset + 2500, p9.offsetInDocument());
    for (int i = 1; i <= manager->pageCount(); ++i) {
        KWPage page = manager->page(i);
        QVERIFY(page.isValid());
        KoShape *shape = fs->frames().at(i-1)->shape();
        QCOMPARE(shape->position(), QPointF(-10, page.offsetInDocument() + 10));
    }
}

void TestPageCommands::testRemovePageCommand() // move of frames
{
    KWDocument document;
    KWPageInsertCommand insertCommand(&document, 0);
    insertCommand.redo();

    KWFrameSet *fs = new KWFrameSet();
    MockShape *shape = new MockShape();
    KWFrame *frame = new KWFrame(shape, fs);
    Q_UNUSED(frame);
    document.addFrameSet(fs);
    KWPageInsertCommand insertCommand2(&document, 1);
    insertCommand2.redo();
    MockShape *shape2 = new MockShape();
    QPointF pos = QPointF(20, insertCommand2.page().offsetInDocument() + 10);
    shape2->setPosition(pos);
    KWFrame *frame2 = new KWFrame(shape2, fs);
    Q_UNUSED(frame2);
    QCOMPARE(document.pageCount(), 2);
    QCOMPARE(document.frameSetCount(), 1);
    QCOMPARE(fs->frameCount(), 2);

    // remove page2
    KWPageRemoveCommand command1(&document, insertCommand2.page());
    command1.redo();

    QCOMPARE(insertCommand.page().pageNumber(), 1);
    QCOMPARE(insertCommand2.page().isValid(), false);

    QCOMPARE(document.pageCount(), 1);
    QCOMPARE(document.frameSetCount(), 1);
    QCOMPARE(fs->frameCount(), 1);

    QCOMPARE(shape2->position(), pos); // shapes are not deleted, just removed from the document

    command1.undo();
    QCOMPARE(insertCommand.page().pageNumber(), 1);
    QCOMPARE(document.pageCount(), 2);
    QCOMPARE(document.frameSetCount(), 1);
    QCOMPARE(fs->frameCount(), 2);

    QCOMPARE(shape2->position(), pos); // not moved.

    // remove page 1
    KWPageRemoveCommand command2(&document, insertCommand.page());
    command2.redo();

    QCOMPARE(insertCommand.page().isValid(), false);
    QCOMPARE(document.pageCount(), 1);
    QCOMPARE(document.frameSetCount(), 1);
    QCOMPARE(fs->frameCount(), 1);

    QCOMPARE(shape->position(), QPointF(0,0));
    QCOMPARE(shape2->position(), QPointF(20, 10)); // moved!

    command2.undo();

    QCOMPARE(document.pageCount(), 2);
    QCOMPARE(document.frameSetCount(), 1);
    QCOMPARE(fs->frameCount(), 2);
    QCOMPARE(shape->position(), QPointF(0,0));
    QCOMPARE(shape2->position(), pos); // moved back!
}