C++ IAAFSegment::Release方法代码示例

//.........这里部分代码省略.........
  check(pDictionary->LookupClassDef(AUID_AAFSequence,
                                    &pCDSequence));
  check(pDictionary->LookupClassDef(AUID_AAFSourceMob,
                                    &pCDSourceMob));
  check(pDictionary->LookupClassDef(AUID_AAFTapeDescriptor,
                                    &pCDTapeDescriptor));
  check(pDictionary->LookupClassDef(AUID_AAFAIFCDescriptor,
                                    &pCDAIFCDescriptor));
  check(pDictionary->LookupClassDef(AUID_AAFNetworkLocator,
                                    &pCDNetworkLocator));
  check(pDictionary->LookupClassDef(AUID_AAFMasterMob,
                                    &pCDMasterMob));
  check(pDictionary->LookupClassDef(AUID_AAFSourceClip,
                                    &pCDSourceClip));
  check(pDictionary->LookupClassDef(AUID_AAFFiller,
                                    &pCDFiller));
  check(pDictionary->LookupDataDef(kAAFDataDef_Picture,
                                   &pDdefPicture));

// IMPORTANT: major remodification is from this point onwards...

  // sequence creation code pulled out of the subsequent loop.
  // Create a Composition Mob
  check(pCDCompositionMob->CreateInstance(IID_IAAFMob,
                                          (IUnknown **)&pCompMob));

  check(pCDSequence->CreateInstance(IID_IAAFSequence,
                                    (IUnknown **)&pSequence));
  check(pSequence->QueryInterface (IID_IAAFSegment, (void **)&seg));

  check(pSequence->QueryInterface(IID_IAAFComponent, (void **)&aComponent));

  check(aComponent->SetDataDef(pDdefPicture));
  aComponent->Release();
  aComponent = NULL;

  check(pCompMob->QueryInterface (IID_IAAFMob, (void **)&pMob));
  check(pMob->AppendNewTimelineSlot(videoRate, seg, i, slotName, 0, &newSlot));
  pMob->Release();
  pMob = NULL;
  newSlot->Release();
  newSlot = NULL;
  seg->Release();
  seg = NULL;

  check(pHeader->AddMob(pCompMob));


  // now looping around the remainder N times to make N components
  for (i=0; i < N; i++) {
    //Make the Tape MOB
    check(pCDSourceMob->CreateInstance(IID_IAAFSourceMob,
                                       (IUnknown **)&pTapeMob));
    check(pCDTapeDescriptor->CreateInstance(IID_IAAFTapeDescriptor,
                                            (IUnknown **)&pTapeDesc));
    check(pTapeDesc->QueryInterface (IID_IAAFEssenceDescriptor,
                                     (void **)&aDesc));
    check(pTapeMob->SetEssenceDescriptor(aDesc));
    aDesc->Release();
    aDesc = NULL;
    pTapeDesc->Release();
    pTapeDesc = NULL;

    check(pTapeMob->AppendTimecodeSlot (videoRate, 0, tapeTC, TAPE_LENGTH));
    check(pTapeMob->AddNilReference (1,TAPE_LENGTH, pDdefPicture, videoRate));
    check(pTapeMob->QueryInterface (IID_IAAFMob, (void **)&pMob));

static HRESULT ProcessAAFFile(const aafWChar * pFileName, testType_t testType)
{
	IAAFFile *					pFile = NULL;
	IAAFHeader *				pHeader = NULL;
	IAAFDictionary*				pDictionary = NULL;
	IEnumAAFMobs*				pMobIter = NULL;
	aafNumSlots_t				numMobs, numSlots;
	aafSearchCrit_t				criteria;
	aafMobID_t					mobID;
	aafWChar					namebuf[1204];
	const aafWChar*				slotName = L"A slot in Composition Mob";
	IAAFComponent*				pComponent = NULL;
	IAAFComponent*				aComponent = NULL;
	IEnumAAFMobSlots*			pMobSlotIter = NULL;
	IAAFMobSlot*				pMobSlot = NULL;
	IAAFTimelineMobSlot*		newSlot = NULL;
	IAAFSegment*				seg = NULL;
	IAAFSegment*				pSegment = NULL;
	IAAFMob*					pCompMob = NULL;
	IAAFMob*					pMob = NULL;
	aafPosition_t				zeroPos = 0;
	IAAFSequence*				pAudioSequence = NULL;
	IAAFSourceClip*				pSourceClip = NULL;
	aafLength_t					duration;
	IAAFTimelineMobSlot* pTimelineMobSlot = NULL;
  IAAFClassDef *pCompositionMobDef = NULL;
  IAAFClassDef *pSequenceDef = NULL;
  IAAFClassDef *pSourceClipDef = NULL;
  IAAFDataDef *pSoundDef = NULL;
  IAAFDataDef *pDataDef = NULL;
	

	// Set the edit rate information
	aafRational_t				editRate;
	editRate.numerator = 48000;
	editRate.denominator = 1;

	// Set search condition to true
	bool lookingForAudio = true;

	// Call the routine (from ExportAudioExample) to make the file for processing
	check(CreateAAFFile(pwFileName, NULL, testStandardCalls, &pFile));

	/* Get the Header and iterate through the Master Mobs in the existing file */
	check(pFile->GetHeader(&pHeader));
	check(pHeader->GetDictionary(&pDictionary));

	
  /* Lookup class definitions for the objects we want to create. */
  check(pDictionary->LookupClassDef(AUID_AAFCompositionMob, &pCompositionMobDef));
  check(pDictionary->LookupClassDef(AUID_AAFSequence, &pSequenceDef));
  check(pDictionary->LookupClassDef(AUID_AAFSourceClip, &pSourceClipDef));

  /* Lookup any necessary data definitions. */
  check(pDictionary->LookupDataDef(kAAFDataDef_Sound, &pSoundDef));
  

	// Get the number of master mobs in the existing file (must not be zero)
	check(pHeader->CountMobs(kAAFMasterMob, &numMobs));
	if (numMobs != 0)
	{
		printf("Found %d Master Mobs\n", numMobs);
		criteria.searchTag = kAAFByMobKind;
		criteria.tags.mobKind = kAAFMasterMob;
		check(pHeader->GetMobs(&criteria, &pMobIter));

		/* Create a Composition Mob */
		check(pCompositionMobDef->
			  CreateInstance(IID_IAAFMob,
							 (IUnknown **)&pCompMob));
		/* Append the Mob to the Header */
		check(pHeader->AddMob(pCompMob));
 
		/* Create a TimelineMobSlot with an audio sequence */
		check(pSequenceDef->
			  CreateInstance(IID_IAAFSequence,
							 (IUnknown **)&pAudioSequence));
		check(pAudioSequence->QueryInterface(IID_IAAFSegment, (void **)&seg));

		check(pAudioSequence->QueryInterface(IID_IAAFComponent,
											 (void **)&aComponent));

		check(aComponent->SetDataDef(pSoundDef));
		check(pCompMob->AppendNewTimelineSlot(editRate, seg, 1, slotName, zeroPos, &newSlot));
    seg->Release();
    seg = NULL;
    newSlot->Release();
    newSlot = NULL;

		// This variable is about to be overwritten so we need to release the old interface
		aComponent->Release();
		aComponent = NULL;

		while((AAFRESULT_SUCCESS == pMobIter->NextOne(&pMob)))
		{
			//  Print out information about the Mob
			char mobIDstr[256];
			char mobName[256];

			check(pMob->GetMobID (&mobID));
//.........这里部分代码省略.........

void EventTest::CreateEvent()
{
  assert(_pHeader && _pDictionary);

  HRESULT hr = S_OK;
  IAAFEvent *pEvent = NULL;
  IAAFEventMobSlot *pEventMobSlot = NULL;
  IAAFSegment *pSegment = NULL;
  IAAFMobSlot *pMobSlot = NULL;
  IAAFDataDef *pDataDef = NULL;
  IAAFComponent *pComp = NULL;
  IAAFMob *pMob = NULL;

  CAAFBuiltinDefs defs (_pDictionary);

  try
  {
	  // not already in dictionary
		checkResult(defs.cdDataDef()->
					CreateInstance (IID_IAAFDataDef,
									(IUnknown **)&pDataDef));
	  hr = pDataDef->Initialize (kAAFDataDef_Test, L"Test", L"Test data");
	  hr = _pDictionary->RegisterDataDef (pDataDef);

	// Create a concrete subclass of event
    checkResult(defs.cdCommentMarker()->
				CreateInstance(IID_IAAFEvent, 
							   (IUnknown **)&pEvent));
    checkResult(pEvent->SetPosition(_position));
    checkResult(pEvent->SetComment(const_cast<wchar_t*>(_eventComment)));
	checkResult(pEvent->QueryInterface(IID_IAAFComponent, (void **)&pComp));
	checkResult(pComp->SetDataDef(pDataDef));
	pComp->Release();
	pComp = NULL;

    // Get the segment inteface to the event to install into the mob slot.
    checkResult(pEvent->QueryInterface(IID_IAAFSegment, (void **)&pSegment));

    // Create and initialize an EventMobSlot
    checkResult(defs.cdEventMobSlot()->
				CreateInstance(IID_IAAFEventMobSlot, 
							   (IUnknown **)&pEventMobSlot));
    checkResult(pEventMobSlot->SetEditRate(const_cast<aafRational_t *>(&_editRate)));

    // Get the mob slot interface so that we can add the event segment.
    checkResult(pEventMobSlot->QueryInterface(IID_IAAFMobSlot, (void **)&pMobSlot));

    // Add the event segment to the event mob slot.
    checkResult(pMobSlot->SetSegment(pSegment));

    // Create the mob to hold the new event mob slot.
    checkResult(defs.cdCompositionMob()->
				CreateInstance(IID_IAAFMob, 
							   (IUnknown **)&pMob));
    checkResult(pMob->SetName(L"CompositionMob::Name:Test mob to hold an event mob slot"));

    // Append event slot to the composition mob.
    checkResult(pMob->AppendSlot(pMobSlot));

    // Save the id of the composition mob that contains our test
    // event mob slot.
    checkResult(pMob->SetMobID(gMobID));
    
    // Attach the mob to the header...
    checkResult(_pHeader->AddMob(pMob));

  }
  catch (HRESULT& rHR)
  {
    hr = rHR;
    // fall through and handle cleanup
  }

  // Cleanup local references
  if (pMob)
  {
    pMob->Release();
    pMob = NULL;
  }

  if (pDataDef)
  {
    pDataDef->Release();
    pDataDef = NULL;
  }

  if (pComp)
  {
    pComp->Release();
    pComp = NULL;
  }

  if (pMobSlot)
  {
    pMobSlot->Release();
    pMobSlot = NULL;
  }

  if (pEventMobSlot)
  {
//.........这里部分代码省略.........

void EventTest::OpenEvent()
{
  assert(_pHeader);

  HRESULT hr = S_OK;
  IAAFMob *pMob = NULL;
  IEnumAAFMobSlots *pEnumSlots = NULL;
  IAAFMobSlot *pMobSlot = NULL;
  IAAFEventMobSlot *pEventMobSlot = NULL;
  aafRational_t editRate = {0};
  IAAFSegment *pSegment = NULL;
  IAAFEvent *pEvent = NULL;
  aafPosition_t position;
  wchar_t eventComment[128];


  try
  {
    // Get the composition mob that we created to hold the
    checkResult(_pHeader->LookupMob(gMobID, &pMob));

    // Get the first mob slot and check that it is an event mob slot.
    checkResult(pMob->GetSlots(&pEnumSlots));
    checkResult(pEnumSlots->NextOne(&pMobSlot));
    checkResult(pMobSlot->QueryInterface(IID_IAAFEventMobSlot, (void **)&pEventMobSlot));
    checkResult(pEventMobSlot->GetEditRate(&editRate));
    checkExpression(0 == memcmp(&editRate, &_editRate, sizeof(editRate)), AAFRESULT_TEST_FAILED);

    // Get the event slot's segment and check that it is an event.
    checkResult(pMobSlot->GetSegment(&pSegment));
    checkResult(pSegment->QueryInterface(IID_IAAFEvent, (void **)&pEvent));

    // Now validate the event property values we thought were written to the
    // file.

    // Validate the position
    checkResult(pEvent->GetPosition(&position));
    checkExpression(0 == memcmp(&position, &_position, sizeof(position)), AAFRESULT_TEST_FAILED);

    // Validate the comment buffer size.
    aafUInt32 expectedLen = wcslen(_eventComment) + 1;
    aafUInt32 expectedSize = expectedLen * sizeof(wchar_t);
    aafUInt32 commentBufSize = 0;
    checkResult(pEvent->GetCommentBufLen(&commentBufSize));
    checkExpression(commentBufSize == expectedSize, AAFRESULT_TEST_FAILED);
    
    // Validate the event comment.
    checkExpression(commentBufSize <= sizeof(eventComment), AAFRESULT_TEST_FAILED);
    checkResult(pEvent->GetComment(eventComment, commentBufSize));
    checkExpression(0 == memcmp(eventComment, _eventComment, commentBufSize), AAFRESULT_TEST_FAILED); 
  }
  catch (HRESULT& rHR)
  {
    hr = rHR;
    // fall through and handle cleanup
  }

  // Cleanup local references
  if (pEvent)
  {
    pEvent->Release();
    pEvent = NULL;
  }

  if (pSegment)
  {
    pSegment->Release();
    pSegment = NULL;
  }

  if (pEventMobSlot)
  {
    pEventMobSlot->Release();
    pEventMobSlot = NULL;
  }

  if (pMobSlot)
  {
    pMobSlot->Release();
    pMobSlot = NULL;
  }

  if (pEnumSlots)
  {
    pEnumSlots->Release();
    pEnumSlots = NULL;
  }

  if (pMob)
  {
    pMob->Release();
    pMob = NULL;
  }



  // Propogate the error if necessary.
  checkResult(hr);
}

//.........这里部分代码省略.........
		checkResult(pOperationDef->AddParameterDef (pParamDef));
		checkResult(pOperationDef->SetBypass (TEST_BYPASS));


		// ------------------------------------------------------------
		//	To test a Transition we need to create a Sequence which will 
		//	a Filler, a transition and another Filler. I know this is not 
		//  very interesting, but it will let us test the Transition 
		//  interface with the least amount of other stuff.
		// ------------------------------------------------------------
		//
		// Create a CompositionMob
		checkResult(defs.cdCompositionMob()->
					CreateInstance(IID_IAAFCompositionMob, 
								   (IUnknown **)&pCompMob));

		checkResult(pCompMob->Initialize(L"Transition Test"));
		// Get a MOB interface
		checkResult(pCompMob->QueryInterface (IID_IAAFMob, (void **)&pMob));
		checkResult(pMob->SetMobID(TEST_MobID));

		// Create a Sequence
		checkResult(defs.cdSequence()->
					CreateInstance(IID_IAAFSequence,
								   (IUnknown **) &pSequence));

		// Get a Segment interface
		checkResult(pSequence->QueryInterface(IID_IAAFSegment, (void **)&pSegment));
		// Get a component interface and 
		checkResult(pSequence->QueryInterface(IID_IAAFComponent, (void **)&pComponent));
		// set the Data definition for it !
		checkResult(pComponent->SetDataDef(defs.ddkAAFPicture()));
		// Release the component - because we need to reuse the pointer later
		pComponent->Release();
		pComponent = NULL;

		// Create a new Mob Slot that will contain the sequence
		aafRational_t editRate = { 0, 1};
		checkResult(pMob->AppendNewTimelineSlot(editRate,
												pSegment,
												1,
												L"Transition",
												0,
												&pNewSlot));

		// Create a Filler
		checkResult(defs.cdFiller()->
					CreateInstance(IID_IAAFFiller,
								   (IUnknown **) &pFiller));

		// Get a component interface
		checkResult(pFiller->QueryInterface(IID_IAAFComponent, (void **) &pComponent));
		// Set values for the filler
	    checkResult(pFiller->Initialize(defs.ddkAAFPicture(), fillerLength));
		// append the filler to the sequence
		checkResult(pSequence->AppendComponent(pComponent));

		// Release the component - because we need to reuse the pointer later
		pFiller->Release();
		pFiller = NULL;
		pComponent->Release();
		pComponent = NULL;

		
	    checkResult(defs.cdTransition()->
					CreateInstance(IID_IAAFTransition, 

static HRESULT CreateAAFFile(
    aafWChar * pFileName,
    aafUID_constref fileKind,
    testRawStorageType_t rawStorageType,
    aafProductIdentification_constref productID)
{
	IAAFFile*		pFile = NULL;
	IAAFHeader*		pHeader = NULL;
	IAAFDictionary*  pDictionary = NULL;
	IAAFMob*		pMob = NULL;
	IAAFTimelineMobSlot*	pMobSlot = NULL;
	IAAFSequence*	pSequence = NULL;
	IAAFSegment*	pSegment = NULL;
	IAAFComponent*	pComponent = NULL;
	int				i;
	HRESULT			hr = S_OK;
	
	
	try
	{  
		// Remove the previous test file if any.
		RemoveTestFile(pFileName);
		
		
		// Create the AAF file
		checkResult(CreateTestFile( pFileName, fileKind, rawStorageType, productID, &pFile ));
		
		// We can't really do anthing in AAF without the header.
		checkResult(pFile->GetHeader(&pHeader));

		// Get the AAF Dictionary so that we can create valid AAF objects.
		checkResult(pHeader->GetDictionary(&pDictionary));
		CAAFBuiltinDefs defs (pDictionary);
		
		// Create a Composition Mob
		checkResult(defs.cdCompositionMob()->
					CreateInstance(IID_IAAFMob, 
								   (IUnknown **)&pMob));
		
		checkResult(pMob->SetMobID(TEST_MobID));
		checkResult(pMob->SetName(L"EnumAAFDataDefTest"));
		
		// Add mob slot w/ Sequence
		checkResult(defs.cdSequence()->
					CreateInstance(IID_IAAFSequence, 
								   (IUnknown **)&pSequence));		
		checkResult(pSequence->Initialize(defs.ddkAAFPicture()));
		
		//
		//	Add some segments.  Need to test failure conditions
		//	(i.e. starting/ending w/ transition, two trans back
		//	to bacl).
		//
		for(i = 0; i < kNumComponents; i++)
		{
			aafLength_t		len = 10;
			
			checkResult(defs.cdFiller()->
						CreateInstance(IID_IAAFComponent, 
									   (IUnknown **)&pComponent));
			
			if(i == 0)
			{
				checkResult(pComponent->SetDataDef(defs.ddkAAFPictureWithMatte()));
			}
			else
			{
				checkResult(pComponent->SetDataDef(defs.ddkAAFPicture()));
			}

			checkResult(pComponent->SetLength(len));
			checkResult(pSequence->AppendComponent(pComponent));
			
			pComponent->Release();
			pComponent = NULL;
		}
		
		checkResult(pSequence->QueryInterface (IID_IAAFSegment, (void **)&pSegment));
		
		aafRational_t editRate = { 0, 1};
		checkResult(pMob->AppendNewTimelineSlot(editRate,
												pSegment,
												1,
												L"AAF Test Sequence",
												0,
												&pMobSlot));
		
		pMobSlot->Release();
		pMobSlot = NULL;
		
		pSegment->Release();
		pSegment = NULL;
		
		// Add the master mob to the file and cleanup
		pHeader->AddMob(pMob);
		
	}
	catch (HRESULT& rResult)
	{
		hr = rResult;
//.........这里部分代码省略.........

static HRESULT ReadAAFFile(aafWChar * pFileName)
{
	IAAFFile				*pFile = NULL;
	bool					bFileOpen = false;
	IAAFHeader				*pHeader = NULL;
	IEnumAAFMobs			*mobIter = NULL;
	IAAFMob					*aMob = NULL;
	IEnumAAFMobSlots		*slotIter = NULL;
	IAAFMobSlot				*slot = NULL;
	IAAFSegment				*pSeg = NULL;
	IAAFSourceClip			*pSourceClip = NULL;
	IAAFDataDef *            pDataDef = 0;
	IAAFDefObject *          pDefObj = 0;
	aafNumSlots_t			numMobs, n;
	aafSlotID_t				s;
	aafUInt32				length;
	HRESULT					hr = S_OK;
	aafUID_t				readUID, typeUID = kAAFDataDef_Picture;
	
	try
	{
		// Open the file
		checkResult(AAFFileOpenExistingRead(pFileName, 0, &pFile));
		bFileOpen = true;
		
		// We can't really do anthing in AAF without the header.
		checkResult(pFile->GetHeader(&pHeader));
		
		
		checkResult(pHeader->CountMobs(kAAFAllMob, &numMobs));
		checkExpression(1 == numMobs, AAFRESULT_TEST_FAILED);
		
		
		aafSearchCrit_t		criteria;
		criteria.searchTag = kAAFNoSearch;
		checkResult(pHeader->GetMobs (&criteria, &mobIter));
		
		for(n = 0; n < numMobs; n++)
		{
			aafWChar		name[500], slotName[500];
			aafNumSlots_t	numSlots;
			aafMobID_t		mobID;
			aafSlotID_t		trackID;
			
			checkResult(mobIter->NextOne (&aMob));
			checkResult(aMob->GetName (name, sizeof(name)));
			checkResult(aMob->GetMobID (&mobID));
			
			checkResult(aMob->CountSlots (&numSlots));
			checkExpression(5 == numSlots, AAFRESULT_TEST_FAILED);
			
			checkResult(aMob->GetSlots(&slotIter));
			
			for(s = 0; s < (aafSlotID_t)numSlots; s++)
			{
				checkResult(slotIter->NextOne (&slot));
				checkResult(slot->GetNameBufLen(&length));
				checkResult(slot->GetName (slotName, length));
				checkExpression (wcscmp(slotName, slotNames[s]) == 0, AAFRESULT_TEST_FAILED);
				checkResult(slot->GetSlotID(&trackID));
				checkExpression (trackID == s+1, AAFRESULT_TEST_FAILED);
				checkResult(slot->GetPhysicalNum(&trackID));
				checkExpression (trackID == s+2, AAFRESULT_TEST_FAILED);
				checkResult(slot->GetPhysicalNum(&trackID));
				checkResult(slot->GetDataDef(&pDataDef));
				checkResult(pDataDef->QueryInterface (IID_IAAFDefObject, (void **)&pDefObj));
				checkResult(pDefObj->GetAUID(&readUID));
				checkExpression (memcmp(&typeUID, &readUID, sizeof(typeUID)) == 0, AAFRESULT_TEST_FAILED);
				checkResult(slot->GetSegment(&pSeg));
				checkResult(pSeg->QueryInterface (IID_IAAFSourceClip, (void **)&pSourceClip));
				pDataDef->Release();
				pDataDef = 0;
				pDefObj->Release ();
				pDefObj = 0;
				pSourceClip->Release();
				pSourceClip = NULL;
				pSeg->Release();
				pSeg = NULL;
				slot->Release();
				slot = NULL;
			}
			
			aMob->Release();
			aMob = NULL;
		}
	}
	catch (HRESULT& rResult)
	{
		hr = rResult;
	}
	
	// Cleanup object references
	if (slot)
	  {
		slot->Release();
		slot = 0;
	  }
	
	if (pSeg)
	  {
//.........这里部分代码省略.........

static HRESULT ReadAAFFile(aafWChar * pFileName)
{
	// IAAFSession *				pSession = NULL;
	IAAFFile *					pFile = NULL;
	IAAFHeader *				pHeader = NULL;
	IEnumAAFMobs*				pMobIter = NULL;
	IAAFMob*					pMob = NULL;
	IAAFMob*					pReferencedMob = NULL;
	IEnumAAFMobSlots*			pSlotIter = NULL;
	IAAFMobSlot*				pSlot = NULL;
	IAAFSegment*				pSegment = NULL;
	IAAFSourceClip*				pSourceClip = NULL;
	bool bFileOpen = false;
	aafSearchCrit_t				criteria;
	aafNumSlots_t				numMobs, numSlots;
	HRESULT						hr = AAFRESULT_SUCCESS;

	try
	{ 
    // Open the file
		checkResult(AAFFileOpenExistingRead(pFileName, 0, &pFile));
		bFileOpen = true;
 
    // We can't really do anthing in AAF without the header.
		checkResult(pFile->GetHeader(&pHeader));

		// Get the number of mobs in the file (should be one)
		checkResult(pHeader->CountMobs(kAAFAllMob, &numMobs));
		checkExpression(2 == numMobs, AAFRESULT_TEST_FAILED);

		// Enumerate over all Composition Mobs
		criteria.searchTag = kAAFByMobKind;
		criteria.tags.mobKind = kAAFCompMob;
		checkResult(pHeader->GetMobs(&criteria, &pMobIter));
		while (AAFRESULT_SUCCESS == pMobIter->NextOne(&pMob))
		{
			checkResult(pMob->CountSlots(&numSlots));
			checkExpression(1 == numSlots, AAFRESULT_TEST_FAILED);

			checkResult(pMob->GetSlots(&pSlotIter));
			while (AAFRESULT_SUCCESS == pSlotIter->NextOne(&pSlot))
			{
				// The segment should be a source clip...
				checkResult(pSlot->GetSegment(&pSegment));
				pSegment->Release();
				pSegment = NULL;
				pSlot->Release();
				pSlot = NULL;
			}

			pMob->Release();
			pMob = NULL;
		}

	}
  catch (HRESULT& rResult)
  {
    hr = rResult;
  }

	// Cleanup and return
	if (pReferencedMob)
		pReferencedMob->Release();

	if (pSourceClip)
		pSourceClip->Release();

	if (pSegment)
		pSegment->Release();

	if (pSlot)
		pSlot->Release();

	if (pSlotIter)
		pSlotIter->Release();

	if (pMob)
		pMob->Release();

	if (pMobIter)
		pMobIter->Release();

	if (pHeader)
		pHeader->Release();

	if (pFile) 
	{
		if (bFileOpen)
			pFile->Close();
		pFile->Release();
	}

	return hr;
}

//.........这里部分代码省略.........
		

		  if(test == 5)
		  {
			  checkExpression(pMob->AppendNewTimelineSlot (editRate,
										   NULL,
										   test+1,
										   slotNames[test],
										   0,
										   &newSlot) == AAFRESULT_NULL_PARAM, 
										   AAFRESULT_TEST_FAILED);

			  checkExpression(pMob->AppendNewTimelineSlot (editRate,
										   seg,
										   test+1,
										   NULL,
										   0,
										   &newSlot) == AAFRESULT_NULL_PARAM, 
										   AAFRESULT_TEST_FAILED);

			  checkExpression(pMob->AppendNewTimelineSlot (editRate,
										   seg,
										   test+1,
										   slotNames[test],
										   0,
										   NULL) == AAFRESULT_NULL_PARAM, 
										   AAFRESULT_TEST_FAILED);

			  pMob->RemoveSlotAt(4);
			  checkExpression(pMob->RemoveSlotAt(test+1) == AAFRESULT_BADINDEX,
			  							   AAFRESULT_TEST_FAILED);
		  }

		  newSlot->Release();
		  newSlot = NULL;

		  if(newStaticSlot)
			newStaticSlot->Release();
		  newStaticSlot = NULL;

		  seg->Release();
		  seg = NULL;

		  sclp->Release();
		  sclp = NULL;
		  
		  pComponent->Release();
		  pComponent = NULL;
		  
		  pSourceRef->Release();
		  pSourceRef = NULL;
		}



		// PrependSlot
 		checkResult(defs.cdStaticMobSlot()->
					  CreateInstance(IID_IAAFMobSlot, 
									 (IUnknown **)&mSlot));		
 		checkResult(defs.cdFiller()->
					  CreateInstance(IID_IAAFFiller, 
									 (IUnknown **)&filler));		

		checkResult(filler->Initialize(defs.ddkAAFSound(), 10));
		checkResult(filler->QueryInterface (IID_IAAFSegment, (void **)&seg));

//.........这里部分代码省略.........
      														  AAFRESULT_TEST_FAILED);
	      checkExpression(aMob->GetMobInfo(&modified, NULL, 
      								   name, sizeof(name)) == AAFRESULT_NULL_PARAM,
      														  AAFRESULT_TEST_FAILED);
	      checkExpression(aMob->GetMobInfo(&modified, &created, 
      								   NULL, sizeof(name)) == AAFRESULT_NULL_PARAM,
      														  AAFRESULT_TEST_FAILED);
		  checkExpression(aMob->GetMobInfo(&modified, &created, 
      								   name, 1) == AAFRESULT_SMALLBUF,
      												AAFRESULT_TEST_FAILED);
	      checkResult(aMob->GetMobInfo(&modified, &created, name, sizeof(name)));
		  checkTimeStampsAreEqual(creationTimeStamp, created);
		  checkTimeStampsAreEqual(modificationTimeStamp, modified);
		  checkExpression (wcscmp(mobName, name) == 0, AAFRESULT_TEST_FAILED);

		  checkExpression(aMob->CountSlots (NULL) == AAFRESULT_NULL_PARAM, AAFRESULT_TEST_FAILED);
		  checkResult(aMob->CountSlots (&numSlots));

		  //seven slots made by IAAFMob and  one static slot and event slot made throught IAAFMOb2
		  checkExpression((7+1+1) == numSlots, AAFRESULT_TEST_FAILED);

		  checkExpression(aMob->GetSlots(NULL) == AAFRESULT_NULL_PARAM, AAFRESULT_TEST_FAILED);
		  checkResult(aMob->GetSlots(&slotIter));

		  for(s = 0; s < numSlots; s++)
			{
			  checkResult(slotIter->NextOne (&slot));
			  checkResult(slot->GetNameBufLen(&bufLen));
			  checkResult(slot->GetName (slotName, bufLen));
			  checkResult(slot->GetSlotID(&trackID));
			  checkExpression (wcscmp(slotName, slotNames[s]) == 0, AAFRESULT_TEST_FAILED);
			  checkExpression(trackID == (s+1), AAFRESULT_TEST_FAILED);

			  slot->Release();
			  slot = NULL;
			  bufLen = 0;
			  trackID = 0;
			}
			slotIter->Release();
			slotIter = NULL;
			
			// GetSlotAt
			checkExpression(aMob->GetSlotAt(1, NULL) == AAFRESULT_NULL_PARAM,
														AAFRESULT_TEST_FAILED);
			checkExpression(aMob->GetSlotAt(9, &slot) == AAFRESULT_BADINDEX,
														AAFRESULT_TEST_FAILED);
			for (s = 0; s < numSlots; ++s)
			{
				checkResult(aMob->GetSlotAt(s, &slot));
				checkResult(slot->GetNameBufLen(&bufLen));
				checkResult(slot->GetName(slotName, bufLen));
				checkResult(slot->GetSlotID(&trackID));
				checkExpression(wcscmp(slotName, slotNames[s]) == 0, AAFRESULT_TEST_FAILED);
				checkExpression(trackID == (s+1), AAFRESULT_TEST_FAILED);	

				if ( 0 < s && s < 5 ) // These are the SourceClips
				{
					checkResult(slot->GetSegment(&pSegment));
			  		checkResult(pSegment->QueryInterface (IID_IAAFSourceClip, (void **)&pSourceClip));
				  	checkResult(pSourceClip->QueryInterface (IID_IAAFSourceReference, (void **)&pSourceRef));
				    checkResult(pSourceRef->GetSourceID(&sourceID));
				    checkExpression(memcmp(&sourceID, &MOBTestID3, sizeof(aafMobID_t)) == 0,
				    													 AAFRESULT_TEST_FAILED);
			  		pSourceRef->Release();
			  		pSourceRef = NULL;
			  		pSourceClip->Release();

static HRESULT CreateAAFFile(
    aafWChar * pFileName,
    aafUID_constref fileKind,
    testRawStorageType_t rawStorageType,
    aafProductIdentification_constref productID)
{
	IAAFFile *			pFile = NULL;
	bool				bFileOpen = false;
	IAAFHeader *        pHeader = NULL;
	IAAFDictionary*		pDictionary = NULL;
	IAAFMob				*pMob = NULL;
	IAAFMob*			pRMob = NULL;
	IAAFMasterMob*		pReferencedMob = NULL;
	IAAFCompositionMob* pCompMob = NULL;
	IAAFTimelineMobSlot	*newSlot = NULL;
	IAAFSegment			*seg = NULL;
	IAAFSourceClip		*sclp = NULL;
	HRESULT				hr = S_OK;

	try
	{
		// Remove the previous test file if any.
		RemoveTestFile(pFileName);

		// Create the file.
		checkResult(CreateTestFile( pFileName, fileKind, rawStorageType, productID, &pFile ));
		bFileOpen = true;
 
		// We can't really do anthing in AAF without the header.
		checkResult(pFile->GetHeader(&pHeader));

		// Get the AAF Dictionary so that we can create valid AAF objects.
		checkResult(pHeader->GetDictionary(&pDictionary));
		CAAFBuiltinDefs defs (pDictionary);
 		
		//Make the first mob
		long	test;

		// Create a  Composition Mob
		checkResult(defs.cdCompositionMob()->
					CreateInstance(IID_IAAFCompositionMob, 
								   (IUnknown **)&pCompMob));

		checkResult(pCompMob->QueryInterface(IID_IAAFMob, (void **)&pMob));
		checkResult(pMob->SetMobID(TEST_MobID));
		checkResult(pMob->SetName(L"AAFTaggedValuesTest"));

		// append a comment to this mob !!
		checkResult(pMob->AppendComment(const_cast<aafWChar*>(TagNames), Comments));
	  
		checkResult(pMob->AppendComment(const_cast<aafWChar*>(TagNames), AltComment));

		// Create a master mob to be referenced
		checkResult(defs.cdMasterMob()->
					CreateInstance(IID_IAAFMasterMob, 
								   (IUnknown **)&pReferencedMob));

		checkResult(pReferencedMob->QueryInterface(IID_IAAFMob, (void **)&pRMob));
		checkResult(pRMob->SetMobID(TEST_referencedMobID));
		checkResult(pRMob->SetName(L"AAFTaggedValueTest::ReferencedMob"));

		// Add some slots
		for(test = 0; test < 5; test++)
		{
 			checkResult(defs.cdSourceClip()->
						CreateInstance(IID_IAAFSourceClip, 
									   (IUnknown **)&sclp));		
			// Set the properties for the SourceClip
			sourceRef.sourceID = TEST_referencedMobID;
			sourceRef.sourceSlotID = 0;
			sourceRef.startTime = 0;
			IAAFDataDefSP pDataDef;
			checkResult(pDictionary->LookupDataDef(*slotDDefs[test], &pDataDef));
			checkResult(sclp->Initialize(pDataDef, slotsLength[test], sourceRef));

			checkResult(sclp->QueryInterface (IID_IAAFSegment, (void **)&seg));
			
			aafRational_t editRate = { 0, 1};
			checkResult(pMob->AppendNewTimelineSlot (editRate,
													 seg,
													 test+1,
													 slotNames[test],
													 0,
													 &newSlot));

			newSlot->Release();
			newSlot = NULL;

			seg->Release();
			seg = NULL;

			sclp->Release();
			sclp = NULL;
		}

		// Add the mob to the file.
		checkResult(pHeader->AddMob(pMob));
		checkResult(pHeader->AddMob(pRMob));
	}
	catch (HRESULT& rResult)
//.........这里部分代码省略.........

static HRESULT CreateAAFFile(
    aafWChar * pFileName,
    aafUID_constref fileKind,
    testRawStorageType_t rawStorageType,
    aafProductIdentification_constref productID)
{
  // IAAFSession*				pSession = NULL;
	IAAFFile*					pFile = NULL;
	IAAFHeader*					pHeader = NULL;
  	IAAFDictionary*  pDictionary = NULL;
	IAAFMob*					pMob = NULL;
	IAAFMob*					pReferencedMob = NULL;
	IAAFTimelineMobSlot*		newSlot = NULL;
	IAAFSegment*				seg = NULL;
	IAAFComponent*				pComponent = NULL;
	IAAFDescriptiveClip*		 pDescClip = NULL;
	bool bFileOpen = false;
	HRESULT						hr = AAFRESULT_SUCCESS;
	
	try
	{
		
	    // Remove the previous test file if any.
	    RemoveTestFile(pFileName);

		// Create the file
		checkResult(CreateTestFile( pFileName, fileKind, rawStorageType, productID, &pFile ));
		bFileOpen = true;
 
		// We can't really do anthing in AAF without the header.
		checkResult(pFile->GetHeader(&pHeader));

		// Get the AAF Dictionary so that we can create valid AAF objects.
		checkResult(pHeader->GetDictionary(&pDictionary));
		CAAFBuiltinDefs defs (pDictionary);
		
		//Make the MOB to be referenced
		checkResult(defs.cdMasterMob()->
					CreateInstance(IID_IAAFMob, 
								   (IUnknown **)&pReferencedMob));
		checkResult(pReferencedMob->SetMobID(TEST_referencedMobID));
		checkResult(pReferencedMob->SetName(L"AAFDescriptiveClipTest::ReferencedMob"));

		// Create a Mob
		checkResult(defs.cdCompositionMob()->
					CreateInstance(IID_IAAFMob, 
								   (IUnknown **)&pMob));
		checkResult(pMob->SetMobID(TEST_MobID));
		checkResult(pMob->SetName(L"AAFDescriptiveClipTest"));

		// Create a DescriptiveClip
		checkResult(defs.cdDescriptiveClip()->
					CreateInstance(IID_IAAFDescriptiveClip, 
								   (IUnknown **)&pDescClip));
		checkResult(pDescClip->QueryInterface(IID_IAAFComponent, (void **)&pComponent));
		checkResult(pComponent->SetDataDef(defs.ddkAAFSound()));
		pComponent->Release();
		pComponent = NULL;
		
		// Set the properties for the SourceClip
		//checkResult(pDescClip->SetFade( fadeInLen, fadeInType, fadeOutLen, fadeOutType));
	
		sourceRef.sourceID = TEST_referencedMobID;
		sourceRef.sourceSlotID = 0;
		sourceRef.startTime = 0;
		checkResult(pDescClip->Initialize(defs.ddkAAFSound(), 1000, sourceRef));

    	// Get described slots - should not be present.
    	aafUInt32 size = 0;
    	AAFRESULT hr = pDescClip->CountDescribedSlotIDs( &size );
    	checkExpression( AAFRESULT_PROP_NOT_PRESENT == hr, AAFRESULT_TEST_FAILED );
    	
	    // Set/Get single described slot id
	    aafUInt32 setSingleDescribedSlotID = 0xdeadbeef;
	    checkResult( pDescClip->AddDescribedSlotID( setSingleDescribedSlotID ) );
	    aafUInt32 getSingleDescribedSlotID = 0;
	    checkResult( pDescClip->GetDescribedSlotIDs( 1, &getSingleDescribedSlotID ) );
	    checkExpression( setSingleDescribedSlotID == getSingleDescribedSlotID, AAFRESULT_TEST_FAILED );

	    // Clear the ID set for the next test
	    checkResult( pDescClip->RemoveDescribedSlotID( setSingleDescribedSlotID ) );

	    // Set the persistent described slots.
	    for( aafUInt32 i_tid = 0; i_tid < TestDescribedSlotIDsVectorSize; ++i_tid )
	    {
		    checkResult( pDescClip->AddDescribedSlotID( TestDescribedSlotIDsVector[i_tid] ) );
	    }

		aafUInt32 getDescribedSlotIDsVector[TestDescribedSlotIDsVectorSize];

		checkResult( pDescClip->GetDescribedSlotIDs( TestDescribedSlotIDsVectorSize, getDescribedSlotIDsVector ) );
		checkExpression( 0 == memcmp( getDescribedSlotIDsVector, TestDescribedSlotIDsVector, sizeof(TestDescribedSlotIDsVector) ),
					     AAFRESULT_TEST_FAILED );
		
		checkResult(pDescClip->QueryInterface (IID_IAAFSegment, (void **)&seg));
		aafRational_t editRate = { 0, 1};
		checkResult(pMob->AppendNewTimelineSlot (editRate,
												 seg,
												 1,
												 slotName,
//.........这里部分代码省略.........

static HRESULT ReadAAFFile(aafWChar * pFileName)
{
	// IAAFSession *				pSession = NULL;
	IAAFFile *					pFile = NULL;
	IAAFHeader *				pHeader = NULL;
	IEnumAAFMobs*				pMobIter = NULL;
	IAAFMob*					pMob = NULL;
	IAAFMob*					pReferencedMob = NULL;
	IEnumAAFMobSlots*			pSlotIter = NULL;
	IAAFMobSlot*				pSlot = NULL;
	IAAFSegment*				pSegment = NULL;
	IAAFDescriptiveClip*				pDescClip = NULL;
	bool bFileOpen = false;
	aafSearchCrit_t				criteria;
	aafNumSlots_t				numMobs, numSlots;
	HRESULT						hr = AAFRESULT_SUCCESS;

	try
	{ 
    // Open the file
		checkResult(AAFFileOpenExistingRead(pFileName, 0, &pFile));
		bFileOpen = true;
 
    // We can't really do anthing in AAF without the header.
		checkResult(pFile->GetHeader(&pHeader));

		// Get the number of mobs in the file (should be one)
		checkResult(pHeader->CountMobs(kAAFAllMob, &numMobs));
		checkExpression(2 == numMobs, AAFRESULT_TEST_FAILED);

		// Enumerate over all Composition Mobs
		criteria.searchTag = kAAFByMobKind;
		criteria.tags.mobKind = kAAFCompMob;
		checkResult(pHeader->GetMobs(&criteria, &pMobIter));
		while (AAFRESULT_SUCCESS == pMobIter->NextOne(&pMob))
		{
			checkResult(pMob->CountSlots(&numSlots));
			checkExpression(1 == numSlots, AAFRESULT_TEST_FAILED);

			checkResult(pMob->GetSlots(&pSlotIter));
			while (AAFRESULT_SUCCESS == pSlotIter->NextOne(&pSlot))
			{
				// The segment should be a source clip...
				checkResult(pSlot->GetSegment(&pSegment));
				checkResult(pSegment->QueryInterface(IID_IAAFDescriptiveClip, (void **) &pDescClip));
				
				// Get, and test, the described slots from the marker.
			    aafUInt32 getDescribedSlotIDsVector[TestDescribedSlotIDsVectorSize];
			    aafUInt32 getDescribedSlotIDsVectorSize = 0;
			
			    checkResult( pDescClip->CountDescribedSlotIDs( &getDescribedSlotIDsVectorSize ) );
			    checkExpression( TestDescribedSlotIDsVectorSize == getDescribedSlotIDsVectorSize, AAFRESULT_TEST_FAILED );
			
			    checkExpression( AAFRESULT_SMALLBUF ==
					       pDescClip->GetDescribedSlotIDs( getDescribedSlotIDsVectorSize-1, getDescribedSlotIDsVector ),
					     AAFRESULT_TEST_FAILED );
			
			    checkResult( pDescClip->GetDescribedSlotIDs( getDescribedSlotIDsVectorSize, getDescribedSlotIDsVector ) );
			    checkExpression( 0 == memcmp( getDescribedSlotIDsVector, TestDescribedSlotIDsVector, sizeof(TestDescribedSlotIDsVector) ),
					     AAFRESULT_TEST_FAILED );
			
				
				
				pSlot->Release();
				pSlot = NULL;
			}

			pMob->Release();
			pMob = NULL;
		}

	}
  catch (HRESULT& rResult)
  {
    hr = rResult;
  }

	// Cleanup and return
	if (pReferencedMob)
		pReferencedMob->Release();

	if (pDescClip)
		pDescClip->Release();

	if (pSegment)
		pSegment->Release();

	if (pSlot)
		pSlot->Release();

	if (pSlotIter)
		pSlotIter->Release();

	if (pMob)
		pMob->Release();

	if (pMobIter)
		pMobIter->Release();

	if (pHeader)
//.........这里部分代码省略.........

static HRESULT ReadAAFFile(aafWChar* pFileName)
{
	IAAFFile*			pFile = NULL;
	IAAFHeader*			pHeader = NULL;
	IAAFDictionary*		pDictionary = NULL;
	IEnumAAFOperationDefs *pOperationGroupEnum = NULL;
	IEnumAAFParameterDefs *pParmDefEnum = NULL;
	IAAFOperationDef		*pOperationDef = NULL;
	IAAFParameterDef	*pParmDef = NULL;
	IAAFParameter		*pParameter = NULL;
	IAAFMetaDefinition*		pMetaDefinition = NULL;
	IAAFSegment*		pSeg = NULL;
	IAAFOperationGroup*			pOperationGroup = NULL;
	IEnumAAFMobs		*mobIter = NULL;
	IAAFMob*			pMob = NULL;
	IEnumAAFMobSlots	*slotIter = NULL;
	IAAFMobSlot*		pSlot = NULL;
	IAAFFiller*			pFill = NULL;
	IAAFSourceReference *pSourceRef = NULL;
	IEnumAAFControlPoints *pEnumCP = NULL;
	IAAFControlPoint	*pControlPoint = NULL;
	IAAFVaryingValue	*pVaryingValue = NULL;
	IAAFInterpolationDef	*pInterpDef = NULL;
	IAAFTypeDef			*pTypeDef = NULL;
	bool				bFileOpen = false;
	aafBool				readIsTimeWarp;
	aafUInt32			testNumSources, testNumParam;
	HRESULT				hr = S_OK;
	aafNumSlots_t		s;
	aafNumSlots_t	numSlots;
	aafUInt32			readOverride;
	aafBool				readValidTransition;
	aafRational_t		testTime;
	aafRational_t	sampleValue1 = kTestLevel1, sampleValue2 = kTestLevel2, testValue;
	aafRational_t		checkTime1 = kTestTime1;
	aafRational_t		checkTime2 = kTestTime2;
	aafEditHint_t		checkEditHint;
	aafUID_t			testInterpDef, checkInterpDef = kAAFTypeID_Rational;

	try
	{
		// Open the AAF file
		checkResult(AAFFileOpenExistingRead(pFileName, 0, &pFile));
		bFileOpen = true;
		
		// Get the AAF file header.
		checkResult(pFile->GetHeader(&pHeader));

		aafSearchCrit_t		criteria;
		criteria.searchTag = kAAFNoSearch;
		checkResult(pHeader->GetMobs (&criteria, &mobIter));
				
		checkResult(mobIter->NextOne (&pMob));			
		checkResult(pMob->GetSlots(&slotIter));
		checkResult(pMob->CountSlots (&numSlots));
		
		for(s = 0; s < numSlots; s++)
		{
			checkResult(slotIter->NextOne (&pSlot));
			checkResult(pSlot->GetSegment (&pSeg));
			checkResult(pSeg->QueryInterface (IID_IAAFOperationGroup, (void **)&pOperationGroup));
			pSeg->Release();
			pSeg = NULL;

			checkResult(pOperationGroup->CountSourceSegments(&testNumSources));
			checkExpression(testNumSources == TEST_NUM_INPUTS, AAFRESULT_TEST_FAILED);
			checkResult(pOperationGroup->CountParameters(&testNumParam));
			checkExpression(testNumSources == 1, AAFRESULT_TEST_FAILED);

			checkResult(pOperationGroup->IsATimeWarp (&readIsTimeWarp));
			checkExpression(readIsTimeWarp == kAAFFalse, AAFRESULT_TEST_FAILED);

			checkResult(pOperationGroup->GetBypassOverride (&readOverride));
			checkExpression(readOverride == 1, AAFRESULT_TEST_FAILED);

			checkResult(pOperationGroup->IsValidTranOperation (&readValidTransition));
			checkExpression(readValidTransition == kAAFFalse, AAFRESULT_TEST_FAILED);
			/**/
			checkResult(pOperationGroup->GetInputSegmentAt (0, &pSeg));
 			checkResult(pSeg->QueryInterface(IID_IAAFFiller, (void **) &pFill));
			pFill->Release();
			pFill = NULL;
			/**/
			checkResult(pOperationGroup->LookupParameter (kTestParmID, &pParameter));
 			checkResult(pParameter->QueryInterface(IID_IAAFVaryingValue, (void **) &pVaryingValue));

			/*** Check the VaryingValue methods **/
			aafUInt32		testLen, bytesRead;

			checkResult(pVaryingValue->GetControlPoints(&pEnumCP));
			checkResult(pEnumCP->NextOne(&pControlPoint));
			checkResult(pControlPoint->GetValueBufLen (&testLen));
 			checkExpression(testLen == sizeof(sampleValue1), AAFRESULT_TEST_FAILED);
			checkResult(pControlPoint->GetValue (sizeof(sampleValue1), (aafDataBuffer_t)&testValue, &bytesRead));
 			checkExpression(testValue.numerator == sampleValue1.numerator, AAFRESULT_TEST_FAILED);
 			checkExpression(testValue.denominator == sampleValue1.denominator, AAFRESULT_TEST_FAILED);
 			checkExpression(bytesRead == sizeof(sampleValue1), AAFRESULT_TEST_FAILED);
			checkResult(pControlPoint->GetTime(&testTime));
 			checkExpression(testTime.numerator == checkTime1.numerator, AAFRESULT_TEST_FAILED);
 			checkExpression(testTime.denominator == checkTime1.denominator, AAFRESULT_TEST_FAILED);
//.........这里部分代码省略.........

static HRESULT CreateAAFFile(
    aafWChar * pFileName,
    aafUID_constref fileKind,
    testRawStorageType_t rawStorageType,
    aafProductIdentification_constref productID)
{
	IAAFFile *					pFile = NULL;
	bool bFileOpen = false;
	IAAFHeader *        pHeader = NULL;
	IAAFDictionary*  pDictionary = NULL;
	IAAFMob						*pMob = NULL;
	IAAFMobSlot		*newSlot = NULL;
	IAAFSegment		*seg = NULL;
	IAAFSourceClip	*sclp = NULL;
	IAAFComponent	*pComp = NULL;
	HRESULT						hr = S_OK;
	
	
	try
	{
		// Remove the previous test file if any.
		RemoveTestFile(pFileName);
		
		// Create the file.
		checkResult(CreateTestFile( pFileName, fileKind, rawStorageType, productID, &pFile ));
		bFileOpen = true;
		
		// We can't really do anthing in AAF without the header.
		checkResult(pFile->GetHeader(&pHeader));
		
		// Get the AAF Dictionary so that we can create valid AAF objects.
		checkResult(pHeader->GetDictionary(&pDictionary));
		CAAFBuiltinDefs defs (pDictionary);
		
		//Make the first mob
		long	test;
		
		// Create a concrete subclass of Mob
		checkResult(defs.cdMasterMob()->
					CreateInstance(IID_IAAFMob, 
								   (IUnknown **)&pMob));
		
		checkResult(pMob->SetMobID(TEST_MobID));
		checkResult(pMob->SetName(L"MOBTest"));
		
		// Add some slots
		for(test = 0; test < 5; test++)
		{
			checkResult(defs.cdSourceClip()->
						CreateInstance(IID_IAAFSourceClip, 
									   (IUnknown **)&sclp));		
			
			checkResult(sclp->QueryInterface (IID_IAAFComponent, (void **)&pComp));
			checkResult(pComp->SetDataDef (defs.ddkAAFPicture()));
			pComp->Release();
			pComp = NULL;
			checkResult(sclp->QueryInterface (IID_IAAFSegment, (void **)&seg));
			
			// Create a concrete subclass of MobSlot
			checkResult(defs.cdStaticMobSlot()->
						CreateInstance(IID_IAAFMobSlot, 
									   (IUnknown **)&newSlot));		
			
			checkResult(newSlot->SetSegment(seg));
			checkResult(newSlot->SetSlotID(test+1));
			checkResult(newSlot->SetPhysicalNum(test+2));
			checkResult(newSlot->SetName(slotNames[test]));
			checkResult(pMob->AppendSlot (newSlot));
			
			newSlot->Release();
			newSlot = NULL;
			
			seg->Release();
			seg = NULL;
			
			sclp->Release();
			sclp = NULL;
		}
		
		// Add the mob to the file.
		checkResult(pHeader->AddMob(pMob));
	}
	catch (HRESULT& rResult)
	{
		hr = rResult;
	}
	
	
	// Cleanup and return
	if (newSlot)
		newSlot->Release();
	
	if (seg)
		seg->Release();
	
	if (sclp)
		sclp->Release();
	
	if (pComp)
		pComp->Release();
//.........这里部分代码省略.........